Howdy friends. I recently rooted and installed cyan 4.0.1/teds hero. Everything was going smooth until about 20 min ago. The messaging app kept force closing everytime I would open a thread, so I rebooted. Upon startup, it said my sd card is now damaged. I clicked format, and nothing happened at all. what's the solution? Any help would be appreciated.
i assume your doing auto apps 2 sd with an ext2/3/4 partition? go to recovery and repair ext filesystems. that should fix you up.
I did nothing beyond rooting / cyan / teds hero.
christpuncher said:
I did nothing beyond rooting / cyan / teds hero.
Click to expand...
Click to collapse
k. if you did not partition the sdcard, then take the sdcard out of the g1 (unmount it first in settings), and put it in your pc. try to get the data off of it as best that you can. repartition and format as fat/fat32. put the data back on it, then stick it back in your g1 and see if you can access it, etc.
good luck.
your sd card corrupted, gonna have to reform it, if you install the recovery image from the mytouch that is floating around in the android devolpment forum under new recovery that has an option of reformating your sd card.into 3 partions that would work for you than reflash your rom and theme
here is the link to it. just use in terminal (after putting on root of sdcard also make sure that cyanogen's 1.4 is on the root of your sdcard as well, also for safe keeping have your cm 4.0.x rom on sdcard too)
Code:
su
flash_image recovery /sdcard/recovery-RAv1.2.1G.img
reboot recovery
then once it boots into recovery use the option to format your sdcard into 3 partitions then once it is finished reflash your rom to activate apps2sd, then once it boots up go to the terminal and type
Code:
su
flash_image recovery /sdcard/cm-recovery-1.4.img
that way you will have easily partitioned your sdcard, got apps2sd workning, then return to a recovery image with a recovery console!
I agree with you on having a recovery console but that mytouch recovery is a great way to point noobs since it will easily partion the card for them
gridlock32404 said:
I agree with you on having a recovery console but that mytouch recovery is a great way to point noobs since it will easily partion the card for them
Click to expand...
Click to collapse
thats why i included the steps to going back to the 1.4 recovery after using maybe cyanogen will look into this for his next recovery image. i also sent nephron a pm to see if he would like to include it into his partitioning guides
I hope he does make it into 1.5 for us because it just his 1.4 with some great additions and just missing the console
Related
i am wanting to go from Hero back to a Cyanagen build and am wondering what do i need to do about my Apps on my sd when i set up hero. do i have to do the whole process over again? and if soo do i have to reformat the ext2 partition?
wipe if you are changing to cyanogen's build from hero.
your a2sd will be okay.
cyanogen's 3.4 with his new recovery image 1.2 with do all the work with the symlinks for a2sd.
all assuming you have the newest radio and spl.
mrcrs said:
wipe if you are changing to cyanogen's build from hero.
your a2sd will be okay.
cyanogen's 3.4 with his new recovery image 1.2 with do all the work with the symlinks for a2sd.
all assuming you have the newest radio and spl.
Click to expand...
Click to collapse
yes i do and i already have his new recovery image, so what do i need to do step by step? thanks in advance...
pre step 1. read the guides in the dev section + cyanogen's thread.
pre step 2. post in the correct section.
1. wipe your phone.
2. update.zip cyanogen's 3.4 on your sd.
3. power down.
4. press and hold the power + home keys, so it can load into recovery mode
5. alt + s to apply update.
6. reboot.
7. WAIT
mrcrs said:
pre step 1. read the guides in the dev section + cyanogen's thread.
pre step 2. post in the correct section.
1. wipe your phone.
2. update.zip cyanogen's 3.4 on your sd.
3. power down.
4. press and hold the power + home keys, so it can load into recovery mode
5. alt + s to apply update.
6. reboot.
7. WAIT
Click to expand...
Click to collapse
so will mhy apps still run of sd or is there another step i have to do?
you're apps will still be on your sd.
in cyanogen's recovery press alt +f to recover ext file systems.
you should be good to go.
i would suggest to apply the fix permissions.sh fix will you are at it with a new fresh rom.
mrcrs said:
you're apps will still be on your sd.
in cyanogen's recovery press alt +f to recover ext file systems.
you should be good to go.
i would suggest to apply the fix permissions.sh fix will you are at it with a new fresh rom.
Click to expand...
Click to collapse
after i did that when i load up and get to the "set up" screen where u sign in to google, i have TONS of force closes pop up
did you wipe before flashing 3.4?
did you apply the fix permissions fix?
i typed fix permission in console, it went throught alot of permissions being fixed, but the same thing keeps happening when i reboot, a ****load of force closes pop up and i cant even go through the set up of my google account
I did the same thing to my boyfriends phone, hero ---> cyanogen's newest and have the same problem, it's still searching for HTC programs.
Any help or luck?
safest and surest way to do this is to...
if you have a2sd, backup to PC
reformat the sdcard to fat32
repartition with ext2/3
wipe
flash the new rom (cyanogen)
flash the new recovery (cyanogen)
apply fix permissions
see if it works. if so...
put back all the stuff you had on your sdcard from your PC
then reboot.
wait
gl
missxoash said:
I did the same thing to my boyfriends phone, hero ---> cyanogen's newest and have the same problem, it's still searching for HTC programs.
Any help or luck?
Click to expand...
Click to collapse
safest and surest way to do this is to (but takes longer)...
if you have a2sd, backup to PC
reformat the sdcard to fat32
repartition with ext2/3
wipe
flash the new rom (cyanogen)
flash the new recovery (cyanogen)
apply fix permissions
see if it works. if so...
put back all the stuff you had on your sdcard from your PC
then reboot.
wait
gl
hey, I had Mighty Max's Hero rom installed onto my phone running perfect and I was happy, until today. My phone is randomly rebooting for no reason what so ever. Started yesterday morning with just one reboot and didn't think much of it then when I woke up today it was going crazy and now its just frustrating. So in my frustration I backed up my phone and put a new rom
http://forum.xda-developers.com/showthread.php?t=579674
Now when I flash it goes through everything and then says
Code:
E:Can't chown/mod /system/ (Too many open files)
E:Failure at line 22: set_perm_recursive 0 0 0755 0644
SYSTEM:
Can anyone help me out on this
Specs are in sig.
ok here is what you do, you gotta reformat and repartition your sd card, load a new NON HERO ROM on your sd card, and flash it. that SHOULD do the trick.
i know its a pain in the ass but i have had to do it a couple of times. may i suggest cyanogens rom? its really easy to flash, you just have to flash a .zip before you flash his rom. he has a WIKI. its super easy and pretty stable.
haha oh geeze I did that just before I installed Mighty Max >.<
well, i'll give it a whirl haha.
Thanks for the reply
Edit: It didn't work, I still get errors =/
Did you wipe? Wipe ext?
fix_permissions?
fenixnr said:
Did you wipe? Wipe ext?
fix_permissions?
Click to expand...
Click to collapse
Yes sir, I always do
Wipe Data/Factory
Wipe Ext
Repair Ext
Wipe Data/Factory
install rom
I don't understand why its doing this.
I noticed your using Amon Ra 1.2.3. I was having a problem with the ROM not staying on my phone until I went back to Cyanogen 1.4. Weird any time the phone was plugged in and I rebooted the ROM was gone. Try flashing and after flash unplugging, reboot and get Cyanogen back on there. Just a thought.
Chadzworld said:
I noticed your using Amon Ra 1.2.3. I was having a problem with the ROM not staying on my phone until I went back to Cyanogen 1.4. Weird any time the phone was plugged in and I rebooted the ROM was gone. Try flashing and after flash unplugging, reboot and get Cyanogen back on there. Just a thought.
Click to expand...
Click to collapse
I wasn't able to flash any roms besides a few selected, i wasn't even able to flash Cyanogen's, that even shocked me. It always flashed no matter what.
I reflashed the Mighty Max after thinking that maybe me deleting everything would fix the rom, turns out it doesn't.
When my phone goes idle, it freezes up and restarts from a crash.
I guess its when I get a text, but not all the time though.
CrazyEye said:
I wasn't able to flash any roms besides a few selected, i wasn't even able to flash Cyanogen's, that even shocked me. It always flashed no matter what.
I reflashed the Mighty Max after thinking that maybe me deleting everything would fix the rom, turns out it doesn't.
When my phone goes idle, it freezes up and restarts from a crash.
I guess its when I get a text, but not all the time though.
Click to expand...
Click to collapse
Are you wiping your Ext3 with Amon Ra Recovery 1.2.3? If so, go to recovery drop to console and hit enter, then mkefs2 -j /dev/block/mmcblk0p2 enter. Wait, let it do its thing. Then,
reboot recovery enter. Now flash and proceed to reflash your recovery back to Cyanogen 1.4. If this fails, you may want to go back to RC29. Sounds like alot of work but at least you'll have a functioning phone.
Chadzworld said:
Are you wiping your Ext3 with Amon Ra Recovery 1.2.3? If so, go to recovery drop to console and hit enter, then mkefs2 /dev/block/mmcblk0p2 enter. Wait, let it do its thing. Then,
reboot recovery enter. Now flash and proceed to reflash your recovery back to Cyanogen 1.4. If this fails, you may want to go back to RC29. Sounds like alot of work but at least you'll have a functioning phone.
Click to expand...
Click to collapse
I tried typing the first command and it wouldn't work. Maybe you typo-ed it?
mkefs2?
Can I use this code to do the same?
# mount -o rw /dev/block/mmcblk0p2 /system/sd
# rm -rf /system/sd/*
# reboot recovery
./fastboot erase recovery
./fastboot flash recovery *name of whatever you named the Cyanogen recovery image*
./fastboot reboot
Click to expand...
Click to collapse
The reason I added "*name of whatever you named the Cyanogen recovery image*" is because I tried flashing Amon Ra's 1.2.3 the same way using the default name but Terminal said I couldn't flash, so I just named it "recoveryimage.img."
blackknightavalon said:
The reason I added "*name of whatever you named the Cyanogen recovery image*" is because I tried flashing Amon Ra's 1.2.3 the same way using the default name but Terminal said I couldn't flash, so I just named it "recoveryimage.img."
Click to expand...
Click to collapse
Hmm I did that as well
in console I put
Code:
cd C:\
fastboot flash recovery cm.img (cm.img is what i named the Cyanogen recovery)
fastboot reboot
It still gives me the same error when trying to install most roms, even in the CM rom.
REFLASH THE HAYKURO "DEATH/DANGER" spl!
it'll repartition (also wipe) your phone's internal phone memory if you haven't already done so,
it's usually the cause since some roms are too big and leave residual files
next stop to ensure a clean install is to just do a data/cache wipe from the recovery menu
now you wanna either wipe/format your ext partition or just repartition your entire sd card for the heck of it
then repair ext partition,
then wipe again
then flash flash flash
phamous said:
REFLASH THE HAYKURO "DEATH/DANGER" spl!
it'll repartition (also wipe) your phone's internal phone memory if you haven't already done so,
it's usually the cause since some roms are too big and leave residual files
next stop to ensure a clean install is to just do a data/cache wipe from the recovery menu
now you wanna either wipe/format your ext partition or just repartition your entire sd card for the heck of it
then repair ext partition,
then wipe again
then flash flash flash
Click to expand...
Click to collapse
Is this the death / danger spl?
http://code.google.com/p/sapphire-port-dream/
if it is, I already have it =/
yeah that's the one, but DO IT AGAIN anyways
because it also cleans out the system.
Do I need to flash the radio again as well or just the SPL?
most times when trouble shooting these things, you'd want to repeat steps to ensure that what you're doing and what you have done at the moment aren't causing your problems, only by redo-ing these steps can you validate what's a problem and what's not, and in the process you'll most likely find a solution!
so try repartitioning, wiping, and reflashing the radio and spl, and finally reflashing your rom
just reflash both
radio, then spl
you wanna make sure everything's in good order.
sometimes if all these things don't work, it might just be your sd card has crapped out on you
and its time to get a new one, sd cards and the flash memory on them are limited to however many read and write cycles and if you've been using linux swap on them, then you're using your sd card as RAM pretty much.
phamous said:
just reflash both
radio, then spl
you wanna make sure everything's in good order.
sometimes if all these things don't work, it might just be your sd card has crapped out on you
and its time to get a new one, sd cards and the flash memory on them are limited to however many read and write cycles and if you've been using linux swap on them, then you're using your sd card as RAM pretty much.
Click to expand...
Click to collapse
I haven't been using my SD card as ext for long though.
I did what you said and it still says the same error.
I even went ahead and installed a new recovery through fastboot to Cyanogen.
EDIT:
I brought the phone back to RC33 and rerooted then upgraded recovery CM 1.3 and Haykuro Death SPL and Latest Radio and I still get the error code.....
I'm going to break this phone >:-(
SenseHero writes but doesn't boot, any reason why?
Sorry about that, check my OP post forgot the -j.
Chadzworld said:
Sorry about that, check my OP post forgot the -j.
Click to expand...
Click to collapse
it says
Code:
mkefs2 : not found
I've been crawling forums looking for several ways to partition my SD, but to no avail.
Recently upgraded from damagecontrol 2.08 to 2.09. Bought a new 8gb micro SD.
I'd like to partition the SD card so that Apps2SD runs, and I remember the first time I rooted my phone and loaded a rom, there was an option in recovery to partition the SD card. Now, my phone boots into clockworkmod recovery v1.8.1.4, and the list of commands doesn't include a card partition option.
How can I get this option back?
I resorted to using adb and trying to work around this problem through the command line, but all of those attempts failed. "parted not found" etc.
I'm at my wit's end and my school work is suffering! (I'm crazy if my phone is not working perfectly) PLZ help this girl stay in med school!
you could flash back to godspeed or darch's unofficial 1.7 recovery found here both these recovery images have the option. clockwork must not support partitioning.
or, you could take your card out and put it in your pc and use a gparted livecd (or linux) to partition the card.
remember to backup your data first as re-partitioning will erase all data on the card.
I'd love to flash a new image, but my phone doesn't seem to allow me to. I use flashrec and it won't flash a new image.
Here's the chronology of my troubles
What I did with my rooted and fully functioning hero was...
back up apps
changed SD cards
set to factory settings via an option of the clockwork recovery
updated my rom to damagecontrol 2.09
found that apps2sd wouldn't work
tried to partition- clockwork recovery doesn't support it
tried to get back SU capabilities unsuccessfully
tried to mimic my first flash attempt unsuccessfully with flashrec
Now I'm stuck with a slowed down hero which can't allow Su and won't do apps2SD
I'm at the point of insanity with this thing
any suggestions?
I have been searching the forums for 2 hours trying to figure this out and I cannot find out how. I tried following the tutorials on the forums here on how to partition the SD card but none of the settings that were listed are not on my recovery. But I still tried it anyways. Here is the list of options on my recovery
Reboot system now
Nandroid v2.2 backup
Nandroid v2.2 restore
Apply sdcard:update.zip
Apply sdcard:choose zip
Wipe data/factory reset
Wipe SD:ext partition
Wipe SD:dalvik-cache
Part SD:fat32+ext2+swap
Part SDnly fat32
Repair ext filesystem
Convert ext2 to ext3
Fix apk uid mismatches
Fix rotate
USB Mass storage on
USB Mass storage off
The bottom says "Build : RA-heroc-v1.2.3".
Upon reading the tutorials, I decided to try something different. So I wiped ext partion, parted sd fat32 ext2 and swap, then converted ext2 to ext3. Applied PureHero 2.1 and I enabled Apps2SD, move apps to sd, move dalvik cache to sd, enable JIT, and changed dalvik heap to 24mb. It rebooted and none of the applications I downloaded and installed were transferred to the SD.
Before this I applied a rom before wiping and parting and changed the same settings and it wasn't working then either.
I tried using the cmd and located to my android-sdk-windows and tried finding what version of apps2sd I had but it kept aborting. I tried repairing and it kept aborting, I even tried installing and it kept aborting.
I am at a loss here and I am trying to get all of this working.
It is a 2gb card and it is only showing 1.34gb available so I have no idea how to give me the full 2gb like it was before I tried partitioning.
Before I posted this, I applied the program at http://forum.xda-developers.com/showthread.php?t=715116 and that didn't work as well.
Please help.
I'm not sure if it makes a difference, but I would try to upgrade to RA-heroc-v1.6.x, it might be your recovery not partitioning correctly or something. Once you have upgraded, go ahead and wipe everything (data, dalvik, and ext). Flash your ROM. Before you move your dalvik to the sd card you want to make sure you have at least a class 4 sd card. Once your phone is booted up check your internal memory and you should have 90+M out of 159 or so. If you have that then I am pretty sure your ap2sd is working. You can also check to make sure it is working through adb. I don't use the option in recovery to move the apps to sd. Hope this helps, and I hope my information is correct, lol. I still consider myself a noob.
Ok ill do some research on how to update and see what I find. If that don't work then ill come back and keep you updated.
Thanks
EDIT: I have tried updating my Recovery using FlashRec and it isn't backing up my recovery or finding the recovery at all. I am on ubuntu so maybe that might be the problem, idk. Is there any other way I can update my recovery? I have 1.6.2 downloaded and just need to apply it.
puppetmstr said:
Is there any other way I can update my recovery? I have 1.6.2 downloaded and just need to apply it.
Click to expand...
Click to collapse
The instructions are here http://forum.xda-developers.com/showthread.php?t=581521#1
I used the adb method last night no problem.
Note: the first thing it tells you to type is "mount -a"
After which your phone might spit out some sort of error message. Don't worry about it, it doesn't affect anything. That's what people said, and it didn't affect me.
c00ller said:
The instructions are here http://forum.xda-developers.com/showthread.php?t=581521#1
I used the adb method last night no problem.
Note: the first thing it tells you to type is "mount -a"
After which your phone might spit out some sort of error message. Don't worry about it, it doesn't affect anything. That's what people said, and it didn't affect me.
Click to expand...
Click to collapse
Well this is confusing lol. I went into recovery, went into USB mode getting ready to update my recovery option and a screen popped up in ubuntu with the folders app, app-private, dalvik-cache, and lost+found. Apparently I had apps2sd working the entire time... But I nandroid last night back to ZenEXP. Idk if it still works in Pure Hero.
But now that I have apps2sd working, I can flash a new rom and still have my applications right?
EDIT: In Windows 7, it doesn't show the partition anymore for the apps2sd. So im just gonna go ahead and update recovery then repartition everything.
Please update with whether or not your apps still work after flashing a new ROM, I want to know if it works like that.
c00ller said:
Please update with whether or not your apps still work after flashing a new ROM, I want to know if it works like that.
Click to expand...
Click to collapse
I cant update the recovery at all. I have tried both ways and it fails.
I tried adb and as soon as i try to use the command "mount -a" it says "no such device". I tried using "mount /sdcard" and it says "Device or resource is busy".
On the Fastboot + adb I can load into fastboot. But when i type "fastboot boot recovery-RA-heroc-v1.6.2-blue.img" it says "cannot load fastboot boot 'recovery-RA-heroc-v1.6.2-blue.img'".
I tried pressing the trackball on fastboot usb and the screen goes black for a second, then i hear a connect noise in the speakers then it shows fastboot for a split second then fastboot usb again.
Also in Fastbot +adb when I use the command "adb shell mount /sdcard" it says "device not found".
EDIT: im also starting to think my adb shell is broken or something lol.
Ok nevermind I got it working. I typed mount /sdcard and it said it was busy but then i used the command "flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2-blue.img" then Rebooted into recovery and it says 1.6.2 and its blue. I just hope I did it the right way and didnt **** anything up...
EDIT: Ok well I partitioned it with 64mb swap, 1024mb ext2, converted to ext3, and loaded up PureHero 2.1. How do I know if it is working? I have my DConfig options set to move dalvik and apps to sd, with JIT enabled. Do I just install an app and see if the internal memory lowers or stays the same? How do I access the apps folder through USB mode?
This is how to tell if you have A2SD working
http://forum.xda-developers.com/showpost.php?p=6848245&postcount=80
Hi, I have a G1 rooted with the SuperD 1.9.3 Rom, I never partitioned my SD card or anything like that. I want to upgrade my SD Card and partition it to get Apps2SD and keep the same Rom. I am not sure what steps to take...
lmt125 said:
Hi, I have a G1 rooted with the SuperD 1.9.3 Rom, I never partitioned my SD card or anything like that. I want to upgrade my SD Card and partition it to get Apps2SD and keep the same Rom. I am not sure what steps to take...
Click to expand...
Click to collapse
Which recovery do you have? If you don't yet, make sure to upgrade to Amon_Ra latest. Once you have that, reboot into recovery, select partition card and follow directions on screen. This will wipe your card completely so backup anything you want to save. It will not affect your rom in any way. You may have to move your existing apps manually, not sure.
How do i know what recovery i have? Do I partition my current sd card or the new one?
So I do not need to reflash the Super D?
lmt125 said:
How do i know what recovery i have? Do I partition my current sd card or the new one?
So I do not need to reflash the Super D?
Click to expand...
Click to collapse
You would boot into recovery and look to see which one you have, it will say it right on top. You will partition your new card. Absolutely no need to reflash your rom, it will recognize your ext partition and install all future apps in it automatically. As I said, I'm not sure about existing apps, you may need to move them manually.
It says Android Sysem Recovery Utility Build: JFv1.42 There is nothing that says Partition SD or anything like that... Now my rom is on my current sd card if I don't flash it to the new one my phone still knows what rom I have? Sorry about all the questions thanks for your help =)
I was thinking of doing this to install Amon RA's recovery img
I got it from another forum in here....
Copy recovery-RA-dream-v1.7.0.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
select console from the menu
#mount -a (this can give back an error if you don't have an ext partition, don't worry about it and just proceed)
#flash_image recovery /sdcard/recovery-RA-dream-v1.7.0.img
JF's recovery does not have that option because it's really, really, really old. We did not even have apps to sd back then.
Flash RA's recovery (directions seem right, I assume you got them out of RA's thread), you'll see the difference: many more options, etc
Good luck.
Ok, so I am going to do the following steps....
1. Flash Amon Ra's recovery image
2. Reboot phone
3. Get into recovery again
4. Back up my sd card on the computer, remove sd card from phone
5. Insert new sd card, partition sd card
6. Transfer files from old sd card including update.zip which is the rom
7. Reboot phone
Let me know if I'm missing something thanks for all your help!
I'm going to do this over the weekend...
Ok, so I got the new Amon RA recovery image but haven't done anything else...lol. So can you tell me if those steps are right? And why don't I need to flash the rom again...I currently have it on my sd card...I'm a bit confused
1. Reboot to recovery. Partition your card (I suggest 512mb for ext partition, rest is fat, follow instructions within recovery).
2. Upgrade ext to ext3.
3. Reboot (your phone will move your existing apps onto sd.) It may take a while to fully boot, just give it 10 min or so.
4. In terminal emulator type
Code:
su
fix_permissions
5. Reboot again.
5. Transfer whatever you had on your old sdcard (music, pics, etc) onto your new card.
As far as flashing the rom again.... why? Your OP says you want to keep your existing rom.
To check if your apps were moved:
In terminal:
Code:
su
ls /system/sd/app
ls /system/sd/app-private
ls /system/sd/dalvik-cache
Should give you print-out of what you have on ext partition of your sdcard (or you can use root explorer or whatever other file manager, I'm a bit old shool so I prefer terminal or adb)
5. Reboot again.
5. Transfer whatever you had on your old sdcard (music, pics, etc) onto your new card.
Okay in step 5. Reboot again do I just type in the terminal emulator reboot or reboot recovery?
Also when you say "transfer whatever you had on your old card..." Do I also transfer the file that says update.zip?
Sorry for all the questions, I should be getting my new sd card today and will try it out tonight.
Thank you.
You just type reboot.
It is up to you what you want to transfer onto your new card. I assume that update.zip is your current rom. If so, it's nice to have just in case but it will not make any difference in how the phone works. It's just an install file that you use once (unless, of course something goes terribly wrong and we all have been there ) but it's nice to have all tools needed on your card so you can quickly recover from any problems.)
BTW, with your new shiny recovery (RA1.7), you don't have to rename your files to update.zip. You can name them whatever you want (i.e Super-D1.9.3.zip, Recovery.zip) and, if you decide to reflash something, at least you will know what it is. Your new recovery will let you choose which file to flash so you can have more then one .zip file on your card if you want.
Ok so I still haven't gotten my new card! It should be here next week...Anyways I tried using switchrom to store my current just in case but I get this error Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)
Any clues why I'm getting this do I need to have my phone connected by USB or something to a computer....?
Thanks hopefully I'll stop asking so many questions...I tried this solution but no luck
Originally Posted by siraf View Post
Guys, I just had this problem too .. at first i was so devastated. I'm glad i solved it.
I don't know if my solution is the ultimate solution or not but you guys can give it a try.
problem :
"E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)"
In the Android System Recovery, select "USB-MS Toggle". It will enabled/disable the feature. Do it one more round and it will solve the problem.
It's telling you that it can't mount SD card.
Back up all of your stuff from SD card, format it and try again, that's the only thing I can think of.
Actually, I just ended up doing a Nandroid Backup just did Nandroid not Nandroid +ext since I don't have this card partitioned...it is backed up!
Ok buddy its easier if you do the whole process through the sdcard
First you should backup everything on your sdcard and do a BART or NAN+EXT then partion your card and restore your BART or NAN+EXT and your good to go
If this does not work press my name and look at my threads because I ask this same quetion a while ago
Post again if this does not work
Sent from my HTC Dream using Droidfreeks's App
DroidFreek said:
Ok buddy its easier if you do the whole process through the sdcard
First you should backup everything on your sdcard and do a BART or NAN+EXT then partion your card and restore your BART or NAN+EXT and your good to go
If this does not work press my name and look at my threads because I ask this same quetion a while ago
Post again if this does not work
Sent from my HTC Dream using Droidfreeks's App
Click to expand...
Click to collapse
Hi, I tried doing a Nan+ext backup but I got this error : Run nandroid-mobile.sh via console I also tried doing a Bart backup and it also said Run Bart via console...
So I just did a regular Nan Backup...I don't have my current sd card partitioned...should I partition it so I can do the Nan+ext I currently have a 2gb card and it doesn't have a class number.... Maybe I should format my card?
Thanks!
Ohh ok I see ur problem it won't let u backup nand+ext if you don't have a ext
since you backed up already go ahead and throw the nandriod and any other files on sd card to your pc the format your sd create the app partion and swap partion make sure u formate it ext3 or ext4 depending on what ur rom uses put the nandroid back on sd after format and restore post if it works or not
If this don't work just reverse the process put nad back on pc format card to what is was before then put nand back on sd and restore
Sent from my HTC Dream using XDA App
OK so I partitioned my current memory card =) and was able to succesfully do a nandroid +ext...so now when I get my new card I just have to go into recovery and do a nandroid restore and transfer all my files right? Thanks
Remember to partion your sdcard before transfer
Sent from my HTC Dream using XDA App
Ok so I tried switching my cards and formatted my new card,paritioned it, transfered the files from my other sd card, and tried to a nandroid restore...that's when I get the same error as before to do it from console.
I tried taking all the files out and repartitioning the sd card doing everything again no luck. Reflashed my rom and turned it on after it boots like normal I get a black screen. So just went back to my old sd card was getting force closes so did nandroid restore it said it did but would boot normal and get force closes.
So I reflashed my rom and reinstalled everything manually...from sd card as my market disappeared got it back after reinstalled it...
Any suggestions as I really want a bigger capacity memory card....=/