Related
Hey there,
Anyone know if a Full screen answer cab exists? I'm hoping to have a full screen answer function (like in s2u2) without having to install the slide to unlock program.
Thanks for any help.
You can install S2U and in setting shut down the keylock. Works fine for me!
yea, thats what I was doing, but was hoping there was a way around having the s2u program installed as I find it really slows down the performance of the phone.
Anyone else have a suggestion?
Thanks for you response anyway! It's appreciated.
u can try Addressbook
or Photocontacts Pro
Moving to Kaiser Forum. Installation of CABs or regular software installation is not generally considered an Upgrading/Development issue.
Mike
I am a right newbie on the HTC TyTN II and would like to know how to play movies on my PDA any ideas how the best way is? just bare in mind i am slow so may need quite the explanation so im sorry if im a bit annoying.
Thanks in advance
James
Update:
i tried the TCPMP but it crashes when i try to open the player it says "Unexpected Program Failure. Please send the crash.txt to the developers. the program will now exit."
Please help
James
The standard TCPMP doesnt work on the Kaiser. There is a modified version 0.72RC3 somewhere on this site which you need to install instead.
Follow this link and download the attached .zip. TCPMP-0.72RC1-ARM-PPC-recomp-03 worked for my Tilt.
I'm somewhat a newb too and so far, xda is the best resource out there. Just do some searching and some reading and you'll find what you're looking for and more.
Click Here
Thanks a million its working perfectly ^^ i thank you all
Hello Seniors,
I have a Tytn II with normal Rom version 3.29.707.0 WWE
Radio Version is 1.65.16.25
I am very new to this ROM cooking & flashing thing but it looks amazing & interesting to see how you make your devices look mesmerizing with all those features that you work upon. I read few instructions about how to install these cooked roms with RUU files..But due to lack of knowledge & experience, it doesn't seem to be working for me. I am looking forward to a Manila 3d or 2d rom's .cab file which comparatively is easier to install. Can someone please help me with a file or a link from where i can get a working Manila or any other Touch 3D rom's .cab file that i can use for my Kaiser..Your help will be highly appreciated.
I found one working .cab file for Manila 2d but it doesn't work in landscape mode.
here u go
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
looking for a quick fix will almost always get you nowhere. Try clicking on the link titled "For all the people that want a cool phone" in my Sig and read the post.
Thanks !!
Thank you all for your response as it really was helping. I appreciate your views about the journey. Not just getting the meal served on table rather also to know how it is being prepared in the kitchen & what's it all about ! Will definitely keep up my research & will try to make most of it. Please keep helping & suggesting as it really helps. I know it's not sumthing that you're here for. But again if u spare some time for queries that u feel r considerable it'd be great. And yes i've gone thru the link : http://forum.xda-developers.com/showthread.php?t=465507 and tried to make it work on my Kaiser..But Touch-Flo 3d was not initiated even after flashing on screen again & again..I got the Second start up & Diamond Album work though..But didn't see Manila 3D working even i tried installing files in my device memory as specified serial order :
TF3D-QVGA
Opera
HTC AudioManager by Swtos
TF3D Standby
Touch Response
HTC-Diamond-Album
Manilla 3D landscape
Please help if anything needs to be done apart from these !!
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
It Worked
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
vicky_crispy said:
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
Click to expand...
Click to collapse
Glad you got everything working, but obviously when you download a lot of crap that wasn't meant for your phone onto your phone,to make it look cool, it uses a lot of resources. While TF3D looks really cool and everyone here has done a great job porting it to our Kaisers, I still think that M2D gives you a lot more " bang for your buck " with fewer problems and fewer needed work a rounds.
RESULTS
Well i agree Denko that this feature is not meant for Kaisers by default. But by using certain means & making them work is what "Development" is all about. I understand there's a price for everything that we do. And after all d research & experiments that i did with my Kaiser..Its not the "Kewl" thing neither the 3D effect that is making me go crazy but its simpy the efforts & the result that i finally derived through them which again has inspired me that i can go ahead & experiment and maybe create new things too. And I can understand on thing for sure, that for a technology freak, There's no end to modifications & development as it's an on-going process.You've yourself been a part of same thing for a long time now i guess, But for me its sumthing i've stepped upon, So i'l take my time & maybe react too. Though you might find it too small to react & childish too, But datz d way it is. Thanks once again for your wise help & suggestions. Now next thing i'd wanna do to my Tilt is Flash a ROM in it..Maybe by next week. And that's sumthing i'm li'l scared of because i dnt wana cause harm to my device at d same time. And even after reading tutorial, M nt getting it worked as my phone gets disconnected from USB mode as soon as i start burning a ROM. Also i dnt really know how to get a HARD SPL 3.56 on my device. I tried that but it didn't work too. Is there some video tutorial that gives a sneek-peek into the action. Anyways i think m going too fast for that, And there's no hurry. So what are you working upon these days ?? And what do you do ?
Clarify & help please ???
kaiserII101 said:
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
Click to expand...
Click to collapse
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
<~THANK YOU~>
fiyaburnz said:
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
Click to expand...
Click to collapse
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
vicky_crispy said:
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
Click to expand...
Click to collapse
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
How to get -G- Rom ???
kaiserII101 said:
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
Click to expand...
Click to collapse
Sir,
thank you for your suggestion. But as I've mentioned in my previous Replies, I am a rookie when it comes to Kaiser or ROM cooking & flashing. So i tried to flash some ROMS in my Kaiser but it failed. I mean my device is connected to my PC thru USB..And then i go thru those normal RUU file initiation screen too. But as it turns into 3 color screen & status shows "0%", It gets stuck right there & gets Disconnected from the USB connection !! And what about HARD SPL...How can i get it done to my Device..Specially with the configuration that i have on Kaiser. Because like i mentioned, I try to flash things through RUU..My phone gets disconnected frm USB ?? And wanted to resolve the query that DO our phones come with a HARD-SPL already ?? What is it actually & Hw can we check if its there on our device already or not ?? I tried by pressing both the "SOFTKEYS" at the same time..all that happened is that my phone screen got locked (Normal screen-lock)..I also tried pressing CAMERA & POWER buttons together for almost 30 seconds..Nothing happened Well these threads help me to an extent as i keep reading. But if there's some specific directions that i can get specific to my query. It might help..Or maybe if there's a Video-tutorial. Plus if you are getting what actually my problem is..I mean with the device..like if there are some specific files that i should use for it to get working..Please attach the links if you would. Because i did check the video of Touchflo 3D manila on Youtube & it was quick out there !! Also i installed some Kaiser tweaks (KaiserTweak-nikagl-20080613-1711) as i read in a thread installing tweaks make Kaiser speed up a lil bit when using Manila 3D..But the Touch-Incall-Screen-Tweal seems to give some trouble as the incoming call screen gets stuck..It did twice today morning. So i have un-installed those tweaks !! So if there's sumthing that you think might get my device a li'l boosted up along with Manila 3D..Please refer that too !! I'l try to flash a ROM once i receive your response about how & which version of HARD SPL will b fine for my Kaiser..And how can i get it on my device ??
Your reply will be awaited & appreciated.. Thanks in Advance
Flashing Your First Kaiser Rom (For Noobs)
click the link stylez posted, don't be embarrassed, I was there about 6 months ago
vicky_crispy said:
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
Click to expand...
Click to collapse
no prob i used it and it worked fine for me i just switched back to 2d about 2 days ago and im already thinking about going back to 3d
installing M3D really makes my Kaiser slow. i installed M2D instead and installed M3D skin i dont have any problem w/ it right now
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Flashed GK.10.Final Rom
kaiserII101 said:
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Click to expand...
Click to collapse
Hey Senior..Than'x for all your support & guidance..I flashed Garmin's version 10 final rom on my Kaiser yesterday night..I had a li'l fear in my mind before i initiated HardSPL 3.29 & then Flashing GK.10.Final on my phone but all that happened very smooth & gave my device an all new look. Now what i am wondering is that how can i use Manila 3D or should i say 3D interface on my Kaiser. Or i must say you advice me what will look the best on my Kaiser. If you have any roms or suggestions upon what can i do post installing -G-'s rom on my kaiser..Or is it the complete package within itself..Please do advice me regarding this..I really would like to move on to the next level..Its really adventurous..Cheers to y'all !!
Regards,
Vicky
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
SUCCESS !!!
kaiserII101 said:
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
Click to expand...
Click to collapse
Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job
Hi.
Test, post bugs here, any suggestions here.
Link: http://www.4shared.com/file/SAW9LqJf/betajakastam.html
It's ramdisk 0 version, other ramdisks are included in releases.
it REALLY should be stable.
hi love other rom only problem was arcsoft mms on o2 i couldnt get it to work is this solved with new rom or any ideas just testing swampys rom at mo got internet can send mms get notification of mms but still cannot download pics soo anoying will test asap thanks for any input you have
downloading....
downloaded, will flash in next 1hr.
flyboy
Downloaded! Flashed And the results:
Bubble breaker doesnt work.
There is a Contrast setting in the settings menu that doesnt work (dont know if it was accidently put there or its supposed to work)
Contacts work!
Solitare works
ie works.
WMP works
file explorer works
Overall: good and very fast!
thanks
flyboy
flyboyovyick2k9 said:
Downloaded! Flashed And the results:
Bubble breaker doesnt work.
There is a Contrast setting in the settings menu that doesnt work (dont know if it was accidently put there or its supposed to work)
Contacts work!
Solitare works
ie works.
WMP works
file explorer works
Overall: good and very fast!
thanks
flyboy
Click to expand...
Click to collapse
Ah contrast, I forgot to redirect it. Himalaya display driver does not support it.
Continue testing )
Sorry ive flash to your previous 25006 beta because i loved it. Thats pretty fast!
And how are you going to fix bubble breaker in this rom?
flyboy
Noone needs games - all cookers need free sectors.
Which build is it?
Sascha
Its Build is 23533 like what i seen...
OOOOh What is that??!!!
Phone doesn`t work!!!!!!!!!!!!!!!
My question is : Tell me please why all Beta editions don`t have input settings??!!!
And i forgot to ask you!!!
Can you please tell me what version of "Fingure kyeboard" is compatible whit WM 6.5.x???
I have Version 2.1 and everytime i installing it, when the install finishes and want to configure, it`s automatically exit and tell me "Fingure keyboard 2.1 installing was not succefull"
Thanks in advanced, and sorry if i made you mad!!!
noaman-atassi said:
Its Build is 23533 like what i seen...
OOOOh What is that??!!!
Phone doesn`t work!!!!!!!!!!!!!!!
My question is : Tell me please why all Beta editions don`t have input settings??!!!
And i forgot to ask you!!!
Can you please tell me what version of "Fingure kyeboard" is compatible whit WM 6.5.x???
I have Version 2.1 and everytime i installing it, when the install finishes and want to configure, it`s automatically exit and tell me "Fingure keyboard 2.1 installing was not succefull"
Thanks in advanced, and sorry if i made you mad!!!
Click to expand...
Click to collapse
Omg, phone works for me,
I really forgot to enable input menu option, sorry, i'm just a chief.
Finger keyboard would not work, could you send me cab you want to use? i will try to 'convert it'.
Bubble breaker is really hard thing to do. Since M$sheeeeep does't provide bubble damager/shooter/killer/breaker with 6.5.x, we doesn't have version which will support bottom bar.
yes I know 28205 had bubble shi.. shooter, but it doesnt work for a while.
Please, continue testing. You can listen to this song while testing (it really makes me more intelligent)
http://www.youtube.com/watch?v=gWOzUzJd6wM&
Cheeerz
Lol for the vid!
Why was your last beta better than the final?
flyboy
flyboyovyick2k9 said:
Lol for the vid!
Why was your last beta better than the final?
flyboy
Click to expand...
Click to collapse
That's easy! May I answer, luby?
**** happens!
That's all.
finger keyboard at WM 6.5.3
for them @xda-dev forum who ask which version can install at Windows Mobile 6.5.x with QVGA resolution, just take a look at my new mobile upload picture at facebook.
just browse my facebook page link on my signature below.
best regards.
reefsucks
Oh bloody how!!!
Man!!!!!!"reefsucks"
I`ve browsed your profile on facebook and didn`t see any picture except a picture for the titanium today screen!!!
Oh i forgot,
Mr.Flyluby,,,this is the CAB of "Fingure kyeboard 2.1"
This is an edition whitout the scrolling arrows
Finger_Keyboard_v2.1_(QVGA).cab
And this one whithin them
FingerKeyb-2.1-QVGA-Giannis86.cab
muckelmaus said:
That's easy! May I answer, luby?
**** happens!
That's all.
Click to expand...
Click to collapse
lol.........
Oh man!!!!!!
What`s that?????????!!!!!!!!!!!
It`s not like that quality!!!But still beta edition, thanks for your work
For me,,the best build was 21884, it`s really stable and fast, but have the same problem, can`t install fingure keyboard
Oh ya!!!!!!!
Mr.aeroflyluby, the original version of windows Phone 6.5.x have normally installed an arabizer and cute keyboard, and i`ve known that the cookers delete them cause of the memory!!!
can you please leave it in the final edition???
I want it cause my work need to sending and recieving arabian messages!!
Thanks alot man
Hi everyone,
I think some of the screen shots i attached would answer some of your questions and some of the improvements you could make out of this rom and since bubble breaker is not functioning i would suggest for luby to just remove it anyway solitaire is still there. With regards to input option you could install ezinput and of course you have the option to change the start menu and the lockscreen with the help of available cabs in this forum
Bubble breaker works now
I will try to solve keyboard issue.
Making this rom will complete in next 2 days, maybe faster.
It takes some time to do because I'm developing aero visual kitchen which I want to release with this rom.
Anyway, for now, everything seem to be okay, but I rather to test it.
One screenshot from the kitchen is attached with this post. I really know that it doesn't make much difference, but at least it seems professional. Also Include list works well.
Kitchen has another file structure now, it is more clear and easy.
But if you like it, wait some time. :d
ediiiit: I have conception why finger keyboard doesn't work, may it require NETCF? It doesn't in my rom, because it takes 7 mbs! omg!
I will try to prepare netcf 3.5 and 4.0 cabs to install. Also you can try to install it from m$ official instalators, but when I tried to install 3.5 it thrown me an exception because of something blabla, You should try to install 3.5, if it fail install 2.0 and then 3.5
Should help in most exceptions Good luck
Can you put the taskbar in from your last beta? Or make a cab for me please?
thanks
flyboy
I 've ben trying to install the lastest version of Bing Mobile on my Tilt and every time i try i get Sorry, the resolution on this device is not supported, please visit http://m.bing.com for the best searchexperience. I downloaded from marketplace and Bing mobile site and still no luck can anyone help.
Exact same problem... just started today. Bad Bing, bad!
Please repost fix if you find out anything. Thanks in advance.
I can't take credit for this, but it worked for me.
Your download installed on my Tilt, but I don't like M$'s new design nearly as much as the old one. Any idea why the old version stopped working, or how to d/l & install the old version without it updating?
golfnz34me said:
I can't take credit for this, but it worked for me.
Click to expand...
Click to collapse
Thanks. That works, but I really prefer the old interface.
golfnz34me said:
I can't take credit for this, but it worked for me.
Click to expand...
Click to collapse
For some reason, this CAB fix did NOT work for me. It installed on my Tilt, but there's been NO change, and I don't know why... Is there something I need to do other than restart the device after installing it on the Tilt?
Thanks for your help.
And I can't find it anywhere in programs or anything. So, if it was supposed to "automatically" do something to stop Bing from telling me that it can't work, and directing me to the web... I don't know what it is... and I need help.
Thanks again...