Related
I've made another patched ROM: ftp://xda:[email protected]/Uploads/Blueangel/wm5_test/ba_wm5_patch3.rar
It differs from the previous ROM in the increased disk cache size and FAT write-through mode is turned off. This potentially can cause loss of data, though in my tests everything worked fine. SPB Benchmark test shows the huge increase in file read speed on my device.
After flashing the device you don't need to do hard reset, nor you'll lose any data (except for system clock settings).
mamaich, can you please tell me what software you use to edit the ROM and maybe a link to a tutorial? I'd like to take my knowledge to the next level.
Thank You,
Alex
Currently there are no tools to make custom ROMs as were for WM2003. I use hex editor (HIEW32) and IDA (www.datarescue.com) to find places I need to patch.
Thanks. I don't think I'm going to tackle that at the moment then
mamaich,
Taking the modules from the emulator image is a smart way bcz it shares the same build, but isn't it better to use the modules dumped from the universal?at least they are final.. (so far)
Universal modules I've tested would hang. There may be 2 reasons - they are dumped incorrectly, or they are designed for VGA-screen. Himalaya 1.60 files work, but they crash often. I think that this is a problem in a dumper. It dumps XIP DLLs/EXEs from memory when they are already loaded by OS and their data sections are already initialized. This cannot be fixed.
Images from emulator are dumped with dumprom tool that produces almost correct files.
I've played a bit with Himalaya registry settings and trueffs.dll driver and made a CAB that would unhide "Extended_ROM" folder and make it fully accessible.
Use this CAB at your own risk as it is not heavily tested.
Fatastic - Will try it right now
Hi Mamaich, Great work.. I will try it at ones... I have just one question, all the patch there has been made for the other ROM will they still work with this one
As soon as I have tested the new ROM I will let you know...
Re: Fatastic - Will try it right now
all the old patches should work with this rom too.
mamaich said:
I've made another version that should work with them, and a set of CAB-files that should be used on it instead of similar cabs from this post.
Click to expand...
Click to collapse
Error 100:
Hi Mamaich,
When i try to install the ROM i get this error:
Error 100: MODEL ID ERROR...
Do you have solution for this
Re: Error 100:
SnowManHere said:
Hi Mamaich,
When i try to install the ROM i get this error:
Error 100: MODEL ID ERROR...
Do you have solution for this
Click to expand...
Click to collapse
it is in wiki
@mamaich
this extrom unlocker will it also work on universal?
thanks
The patched ROM seems to work as it should for me. It installed the MMS from ncruz without complaining.
Hi Mamaich,
Can you pls help asian user by replacing the wince.nls file so that we can have Chinese setting on the BA WM5 machine?
Thanks,
Thank you very much, Mamaich, I finally got working (particulary, but still) a program that did not work before at all.
The extended rom unlocker works; still unable to install a new splash screen. Does the ext rom need to be bigger?
Edit, how do you hide it again? thanks
Edit2; i hard reset (clear storage) and its no longer showing. Hope there will be an easier way soon. Thanks
efjay said:
The extended rom unlocker works; still unable to install a new splash screen. Does the ext rom need to be bigger?
Edit, how do you hide it again? thanks
Edit2; i hard reset (clear storage) and its no longer showing. Hope there will be an easier way soon. Thanks
Click to expand...
Click to collapse
After a Hardreset, you have to reinstall that patch...
KTamas said:
After a Hardreset, you have to reinstall that patch...
Click to expand...
Click to collapse
Do you mean reinstall the patch to hide it again? I know you have to reinstall after a hard reset if you want to show the ext rom again. I was talking about hiding it after you have run the patch to unhide it.
efjay said:
KTamas said:
After a Hardreset, you have to reinstall that patch...
Click to expand...
Click to collapse
Do you mean reinstall the patch to hide it again? I know you have to reinstall after a hard reset if you want to show the ext rom again. I was talking about hiding it after you have run the patch to unhide it.
Click to expand...
Click to collapse
You can not hide your ExtROM once you have repartitioned it. Read the WiKi
! Add anything you like to OEM folder !
! Black and green theme
and
I.Just Run Breeze BUILD.cmd
II.On G'Relok do not change values Just press "Do it"
III.On BuildOS check everything you like and press the green icon
When done just close the window
If you get errors try uncecking SOME OPTIONS
IV.!!! Your Rom is in FLASH folder !!!!
PS.Don't forget to post BUGS and SOLUTIONS
http://rapidshare.com/files/114523206/Breeze_WM_6.1_Cooking_Sets_96_dpi-18165-2.rar.html
Thank You!
till monday i will release an
wm6.1 sys folder from the emulator (STABLE)
drivers OEM folder from the last wwe release
It will be an hard work to clean the registry and rebuild all links
if anybody wants an specific language sys i will create that sys if it exists
i need chinese language sys ,thank you for you hard working!
i run Breeze BUILD.cmd ,and press "Do it",after G'Relok done,the program stop,can not go on.
i go into tools folder,run "buildos.exe",the program prompt "configure error",i think it may i do not install some SDK soft.is not it Microsoft .NET Framework ?
lyf1998 said:
i run Breeze BUILD.cmd ,and press "Do it",after G'Relok done,the program stop,can not go on.
i go into tools folder,run "buildos.exe",the program prompt "configure error",i think it may i do not install some SDK soft.is not it Microsoft .NET Framework ?
Click to expand...
Click to collapse
can not go on. error
jerpelea said:
if anybody wants an specific language sys i will create that sys if it exists
Click to expand...
Click to collapse
Thank you very much for your work.
I would like english language and danish T9 if that is possible?
Thanks in advance,
Snicki
i dont have dannish T9
i will release an dannish rom after microsoft will release an rom for this language
NOW THE ONLY RELEASED LANGUAGE AVAILABLE IS ENGLISH
Error:
Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="9.0.21022.8" could not be found
something to do with VSP.DLL?
use this
http://rapidshare.com/files/105247518/vcredist_x86.zip.html
jerpelea said:
i dont have dannish T9
i will release an dannish rom after microsoft will release an rom for this language
NOW THE ONLY RELEASED LANGUAGE AVAILABLE IS ENGLISH
Click to expand...
Click to collapse
Thanks!
I will be watching this page:
http://www.microsoft.com/downloads/...1e-c093-4b15-ab0c-a2ce5bffdb47&DisplayLang=en
I have been using a rom cooked with A2 for a day know and it works pretty well. No major problems so far.
jerpelea said:
use this
http://rapidshare.com/files/105247518/vcredist_x86.zip.html
Click to expand...
Click to collapse
Installed and rebooted but still not for me (Vista OS)
[Edit] Solution is to install .Net Framework 3.5
i got several errors....
1st error is on BuildOS.exe ... Programm could not be started ...
also later are some errors when operating with temp directory...
the temp directory is deleted on 3rd line or so??
futureshock said:
i got several errors....
1st error is on BuildOS.exe ... Programm could not be started ...
also later are some errors when operating with temp directory...
the temp directory is deleted on 3rd line or so??
Click to expand...
Click to collapse
Requires :
Microsoft Visual C++ 2008 Redistributable Package
download install....
http://www.microsoft.com/downloads/...34-3e03-4391-8a4d-074b9f2bc1bf&DisplayLang=en
ok, thanks that was it...
one other questions....
should the self added files be displayed in the buildos.exe tool??
also if i want files inside other folders i have to edit the initflashes.dat in oem\LangDB ???
edit:
i've testet to add german MUI... but Regfiles arent inserted in registry of flashable rom... (checkt befor flashing with redumping the nbh file manually!!)
next problem i found...
ruuupdater did not work
ruupdater works ONLY with the last sspl v77.7
included in the kitchen)
also i found some other problem...
sound (eg. ring) could not be changed...
i changed the keypress tone once... after that i cant change it back...
have regedited the keys... that works...
futureshock said:
also i found some other problem...
sound (eg. ring) could not be changed...
i changed the keypress tone once... after that i cant change it back...
have regedited the keys... that works...
Click to expand...
Click to collapse
sound /ring works
just place an mp3 file to
\Application Data\Sounds
snicki said:
Thanks!
I will be watching this page:
http://www.microsoft.com/downloads/...1e-c093-4b15-ab0c-a2ce5bffdb47&DisplayLang=en
I have been using a rom cooked with A2 for a day know and it works pretty well. No major problems so far.
Click to expand...
Click to collapse
Could someone export Czech system files? I'm not able to do it.
how can i get rid of that avertisment each time i want to install something: "this program is from an unknown publisher. you should install it only if you trust its publisher....."
ady_uaic said:
how can i get rid of that avertisment each time i want to install something: "this program is from an unknown publisher. you should install it only if you trust its publisher....."
Click to expand...
Click to collapse
Full Kernel Mode
http://forum.xda-developers.com/showthread.php?t=384137 (post #23)
Run the autopatcher_v1_cli.exe on your OS-New.nb (the NB file you put in your final NBH).
The udk Kitchen might have a way to do it for you, have a look for that exe and see if anything calls it - I don't have it downloaded
Ta
Dave
oki..i will..thx
hi guys,
thought i would clean up my system by reinstalling windows this wkend...
been using windows7 + jerpelea with no issues thus far...
but after format/clean install i'm getting an error when building my rom under jerpelea's x1 kitchen
happens after BuildOS / and looking at the batch file its caused by G'reloc
any ideas?? as i need to get this working again
(i did play with bios settings on my motherboard but even when changing them back and reinstalling same error msg)
Launching BuildOS:
After selecting packages and running program
exit the program to contine
Do not close this window!!
Relocating Modules, please wait...
The application has failed to start because its side-by-side configuration is in
correct. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
ERROR! (errorlevel: 14001)
Press any key to continue . . .
ryousuke said:
hi guys,
thought i would clean up my system by reinstalling windows this wkend...
been using windows7 + jerpelea with no issues thus far...
but after format/clean install i'm getting an error when building my rom under jerpelea's x1 kitchen
happens after BuildOS / and looking at the batch file its caused by G'reloc
any ideas?? as i need to get this working again
(i did play with bios settings on my motherboard but even when changing them back and reinstalling same error msg)
Launching BuildOS:
After selecting packages and running program
exit the program to contine
Do not close this window!!
Relocating Modules, please wait...
The application has failed to start because its side-by-side configuration is in
correct. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
ERROR! (errorlevel: 14001)
Press any key to continue . . .
Click to expand...
Click to collapse
Did you try to download the kitchen again ? and tryed it with new downloads maybe something got wrong with your tools.
i never had this issue
Yeah i downloaded it again as i thought there was an issue when i copied files to and from my backup drive (maybe the hidden files didnt get copied)...
same issue...
Hi All,
I flashed the new 6.5 Rom T-Mobile and it's working fine. After this I dumped it and tried to rebuild it with ervius visualkitchen (for testing, I changed nothing). Unfortunately it hangs at about the half of the EXT Packages (Runtime Error). It got nothing to do with the number of modules (I tested it), but obviusly with the number of packages I include. It stops at about the package IME_EzInput_Western.
The EXT Packages from the Test Build are working.
Has anyone else got this problem?
Diewi said:
Hi All,
I flashed the new 6.5 Rom T-Mobile and it's working fine. After this I dumped it and tried to rebuild it with ervius visualkitchen (for testing, I changed nothing). Unfortunately it hangs at about the half of the EXT Packages (Runtime Error). It got nothing to do with the number of modules (I tested it), but obviusly with the number of packages I include. It stops at about the package IME_EzInput_Western.
The EXT Packages from the Test Build are working.
Has anyone else got this problem?
Click to expand...
Click to collapse
Convert modules to files. Good palce to start is the package where it stopped and a couple of packages before and after package it stopped at.
Can you please upload T-Mobile ROM.
At0mAng said:
Convert modules to files. Good palce to start is the package where it stopped and a couple of packages before and after package it stopped at.
Can you please upload T-Mobile ROM.
Click to expand...
Click to collapse
I thought of this first as well, but the issue isn't solved even if I recmod all files in the EXT folder. Must be something else.
Here's the Rom. Might you tell me if have the same problem please?
Diewi said:
I thought of this first as well, but the issue isn't solved even if I recmod all files in the EXT folder. Must be something else.
Here's the Rom. Might you tell me if have the same problem please?
Click to expand...
Click to collapse
When I had that problem all I did was convert modules to files. Actually, the DLL files were already inside modules so I just moved them, deleted module and moved files back in place.
How about trying a different packages for what is causing you error...
Thanks!
I recmodded (converted) all dlls in the EXT folder by using a batch file (it also does the same operations you mention).
The weired thing is that not only certain packages are causing the error, but only their number. Meaning, if exclude one package before the "error package", the error just moves one package down in the list.
Did you already extract the nbh?
Diewi said:
I recmodded (converted) all dlls in the EXT folder by using a batch file (it also does the same operations you mention).
The weired thing is that not only certain packages are causing the error, but only their number. Meaning, if exclude one package before the "error package", the error just moves one package down in the list.
Did you already extract the nbh?
Click to expand...
Click to collapse
I am sure you have it correct but make sure Native 6.5 is selected if you are using Visual Kitchen.
I don't know what else it can be, sorry.
Diewi said:
Hi All,
I flashed the new 6.5 Rom T-Mobile and it's working fine. After this I dumped it and tried to rebuild it with ervius visualkitchen (for testing, I changed nothing). Unfortunately it hangs at about the half of the EXT Packages (Runtime Error). It got nothing to do with the number of modules (I tested it), but obviusly with the number of packages I include. It stops at about the package IME_EzInput_Western.
The EXT Packages from the Test Build are working.
Has anyone else got this problem?
Click to expand...
Click to collapse
Try to disable some unneeded EXT packages, e.g. multimedia stuff and the sample pictures from HTC album. I had the same problem this morning.
are yall talking about the official tmobile 6.5 rom????????? if thats the case where can i find this rom??????????
Uhmm, just look post 3. And, yes official.
To the topic:
I think I found the faulty package (only one! ). I think it's LTB_Resource.
Diewi said:
Uhmm, just look post 3. And, yes official.
To the topic:
I think I found the faulty package (only one! ). I think it's LTB_Resource.
Click to expand...
Click to collapse
thanks diewi didnt see that..... so thats official 6.5 for tmobile? and it will be ok on my us branded one......sorry for repeat question just want to flash and make sure...
Nothing found in english, so the german Rom is the one right now.
hmm build 21854... dumped and build perfectly with my kitchen... dunno, i've never used evirus kitchen.
Make sure you the below line in your kitchen_build.bat
REM **************** TOOLS\platformrebuilder.exe
Rem **************** if not "%errorlevel%"=="0" goto error
Click to expand...
Click to collapse
Well, it's actually been LTB_Resource. Anybody got a working version?
Thanks for your help.
Diewi said:
Well, it's actually been LTB_Resource. Anybody got a working version?
Thanks for your help.
Click to expand...
Click to collapse
LTB Resource?? whats that. if you want i can post the working oem,sys,xip,ext for this rom...
LTB_Resource is a package in the ext Strukture of the TMO Rom. I haven't seen it in other Roms before. Does anyone know what itls good for?
Diewi said:
LTB_Resource is a package in the ext Strukture of the TMO Rom. I haven't seen it in other Roms before. Does anyone know what itls good for?
Click to expand...
Click to collapse
Exclude it and build and see...I dont think you will need that.
Of course I excluded it already, otherwise I wouldn't have found it out, but thanks.
I don't think I need it, as I haven't seen it before, I just wanted to know.
Diewi said:
Of course I excluded it already, otherwise I wouldn't have found it out, but thanks.
I don't think I need it, as I haven't seen it before, I just wanted to know.
Click to expand...
Click to collapse
I've converted it from modules to file with ervius visualkitchen and so i haven't cook errors.