Ok so my G1 is jacked up appariently...
What im running is in my sig, basically what happened is i was using my phone today, the thing was working absolutely fine with no issues whatsoever, but was a little on the slow side, so i figured that i would reboot it to speed it up some
So i rebooted it, the G1 screen came up, everythings fine... Then the blue Android screen came up, everythings fine... Then the Android screen went away and instead of going to home all it did was stay on a black screen and hasent done anything whatsoever, ive tried pulling the battery and rebooting multiple times and it always hangs on this black screen... i wasent even doing anything when i was on it last, it was just a little slow so i thought ide give it a reboot...
any help would be appreciated on how to get my phone back!
Try to boot w/o the cd card. Or try to flash a nandroid backup. Or flash the newest cyan rom 4.0.4.
Sounds like it crashed on you, reboot into recovery, wipe so the whatever the problem was does not carry over and flash a new rom or try a nandroid backup if you got one. Yes this has happened to me and this should work for you
"Theme :: Open Home"
ummm is Open Home an actual theme made for cyan 4.0.2 or are you referring to the app on the market called OpenHome?
Related
its not bootlooping its stuck at the htc scrren u get after it completes the second boot screen....the staus bar appears then disappears and leaves me stuck at the htc screen
what should i do???
i have tried formatting ext3 partition and reflashing but it never works!
any suggestions????
Happened to me too, i solved it by repartitioning my whole card, i think it's bad to only erase the ext3 when you are hopping builds. Probably from hopping JAC to Drizzy, or maybe it's just the old build to the new HTC dump. I really dunno. but thats what i did and it worked.
I first just turned off my phone and turned it back up. Everything loaded, but i had a 0% chance to recieve messages. So yeah it's important to let it fully load.
Bzerk1 said:
Happened to me too, i solved it by repartitioning my whole card, i think it's bad to only erase the ext3 when you are hopping builds. Probably from hopping JAC to Drizzy, or maybe it's just the old build to the new HTC dump. I really dunno. but thats what i did and it worked.
I first just turned off my phone and turned it back up. Everything loaded, but i had a 0% chance to recieve messages. So yeah it's important to let it fully load.
Click to expand...
Click to collapse
ok thanks ill try this ...gotta backup all my music and apps and all that good stuff first
i just flashed champion and it worked perfectly so it is the new hero dump thats causing my problem
For some odd reason everytime I try to install the cyanogen rom v4.0.4 I believe its one of the stable ones, I do everything to root my fone and install the rom and my fone says its done w the updates and to reboot it and when I do it stays @ the g1 screen. Now I take the battery out and press the cam and end buttons to reinstall the dreaimg to take it back to rc29 state. When I power it up it works just fine the lil android dude pops up and i put in my info and then just redo the steps to the cyanogen rom and for some reason my fone will install everything I will assume properly and i go to reboot it and it stays on the tmobile g1 screen.
I need help! I have tried and tried and Idk what to do now.
This all started bc I deleted something from the cm updater and my fone hasnt worked since...if ne one can help me plz email me @ [email protected]....
Thanx!
SekSayLiLRaver said:
For some odd reason everytime I try to install the cyanogen rom v4.0.4 I believe its one of the stable ones, I do everything to root my fone and install the rom and my fone says its done w the updates and to reboot it and when I do it stays @ the g1 screen. Now I take the battery out and press the cam and end buttons to reinstall the dreaimg to take it back to rc29 state. When I power it up it works just fine the lil android dude pops up and i put in my info and then just redo the steps to the cyanogen rom and for some reason my fone will install everything I will assume properly and i go to reboot it and it stays on the tmobile g1 screen.
I need help! I have tried and tried and Idk what to do now.
This all started bc I deleted something from the cm updater and my fone hasnt worked since...if ne one can help me plz email me @ [email protected]....
Thanx!
Click to expand...
Click to collapse
try flashing another build. or wait about 15 maybe 20mins and see if goes away. or just do wipe... or i bet its your sd card try getting to the point where it hangs take out the sd card and then turn it on again.
The first boot after each flash or dalvik-cache dump will take a long time. Just be patient.
Fingerlickin said:
The first boot after each flash or dalvik-cache dump will take a long time. Just be patient.
Click to expand...
Click to collapse
Yes a real long time, right fingerlickin. lol
But if you loaded RC29 back then your gonna have to reroot.
I would suggest wiping if you issue isn't fixed by waiting. I've had to wipe a few times jumping between Experimental and Stable builds mainly because of big Donut differences in the build's.
Fixed???
I think it may have fixed it self, I had my friend look @ it and I had taken the sd card out of it and showed him what happened and he left it alone and it came up w/ an update now he did and its working now like normal...SOoO im scared to try again jus bc i dont wanna f*** it up again but Im stubbern and w/ the info ive learned so far on all these sites I just may do it all over again.
Use THIS guide next time.
Fingerlickin said:
Use THIS guide next time.
Click to expand...
Click to collapse
Show off.
And then use this to partition your card.
http://forum.xda-developers.com/showthread.php?t=535914
I quess I'm a show off too.
Cyanogenrom not working???? HELP!
For some reason every time i dl the cyanogen rom on my g1 it doesnt work i do everything have followed every step and it doesnt work....but i downloaded jf just to see if it worked and it did but im still wondering why this cyanogen rom 4.0.4 doesnt work??? [email protected]
i will try to be as detailed as possible. im coming from the kaiser community so go easy on me
when i had recieved the phone it would turn on go past the tmobile g1 screen and go into the recovery console. the console read. JF 1.41.
after reading around the best option i got was reverting everything back to factory settings.....and so i did. i installed the factory spl went back to rc29....then updated to rc 30 and installed the new cupcake.
everything was fine except for i couldnt get the phone activated given im an AT&T user.
this morning i finally recieved the unlock code from tmobile and when i turn the phone on with the att simcard, it gave me the triangle with the exclamation screen.
so i hit alt +l then alt w and after a reboot it would bring me back to the same screen. Also this recovery screen is diff from the jf 1.41 (im guessing this is the factory console).
now im out of ideas as to how to get this phone back in order. i would love flashing the DREAIMG.NBH but sadly my phone refuses to go in bootloader.
ive been trying to hold camera+ power and its jsut loads up the tmobile g1 screen.
any and all advice/helps are appreciated.
-thank you
so this is totally weird. i leave the phone unplugged with the battery out for about 3 hours. came back to work on it....turned it on and well it loaded and got me to the home screen ( no sim card ).
so i powered off the phone and inserted the AT&T simcard turn it on and it shows me the same screen again with the triangle and exclamation point.
how do u explain that ?!
pressed power for 3 seconds and then let go and held down the back key. it flashed the bootloader tricolor screen and then said ""everything will be reset to factory defaults .press send to reset"" and when i did that there was no change........nothing happened. ended up pulling the battery out..
Same problem..
I have very similar problem.. but mine takes much more than 3 hrs to come back.. and even then , the task manger keeps popping up from time to time in the home screen ,, so i guessed my home button was stuck or something...
After i found your "problem Sovled" post in another theread on 11th oct ..i thought i better take your suggestion before taking phone apart..
I was on 1.5 version and 2.22.19.26I radio. also i do not know whether i'm in RC29,30,33 ..
i'm really confused about all this radio,firmware ,recovery things....
Please Guide me ..
well first you need to get in your ph to find out if u have rc29. if you are able to get to home screen just hit menu - setting - about phone - all the way down it'll tell you what you are running.
i followed this guide to help me flash it to the cyanogenmod rom
http://forum.xda-developers.com/showthread.php?t=563679
hopefully it helps. but if you are able to get into bootloader unlike me then jsut flash the rc29 hopefully it will solve your problem.
my home key acted like it was stuck but now everything is working fine.
Thanks for Replying so quickly ..
I managed to go to the bootloader screen(tricolor) ..actually it went without even pressing the camera button(any idea why??) after leaving the phone without battery for about 5 hours.. and i flashed the Dreaimg-RC29 file .
Since then i'm Stuck in recovery mode again.. but this time the recovery utility is different (yellow letters)..i.e hopefully RC29 is succefully installed.
I wanted to complete doing your suggested guide before asking any more questions, but now i unable to so what shud i do now?
IS the task manger popping up involuntarily sometimes for you in the cM builds?
Can it be that you had a hardware button issue, which somehow rectified itself when going to Cyanogen..
I really appreciate your taking time to answer my questions ..
well sounds like jsut what had happened to me.
make sure you have tmobile simcard on you with a dataplan.
you're going to have to leave your phone off without the battery or just turned off for a while. from here on out it was trial and error. i kept trying to turn the phone on hoping it would go past the recovery screen once it did i activated the phone and finally completed the root process.
as for the cyanogen mod rom i think you are right. though on my initial flash i had a bunch of force closing apps but it all fixed itself upon a restart. ever since then i haven't seen the recovery mode every time i boot it.
PS: that reocvery mode that you see is the stock recovery meaning yes u have flashed RC29 sucessfully.
so i jsut flashed to CM 4.2.3.1. and well im back to square one. im booting into the recovery by default. obviously confirming my doubts about the hardware problem.
im going to try and leave the phone off for a while and see if i can get it to load up. usually that solves my problem.
Oh..
Thats depressing.. Anyways... Lets do it together then I have kept my phone unsed for about 16hrs now.. hope it works ..
Have you tried the HTC Diagonistic program for g1 (DREADIAG.nbh) ?.. I am yet to try it out as i cannot go to the bootloader..
http://www.megaupload.com/?d=7NRX7H40
which version of cyanogen were you using before this happened?
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
mtkhalid said:
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
Click to expand...
Click to collapse
Did you update from 4.1.9999 straight into 4.2.3.1? If so, that's the problem (maybe).. I suggest you install the HTC 1.6 ADP Rom (link in the cyanogen 4.2.3.1 post) then upgrade to 4.2.3.1. Make sure everything is updated.... rom, recovery & spl (before you upgrade SPL make sure you have the most recent radio version first! or you'll brick the phone). then give it a try and see what happens...
you are right. the first time i just flashed the new rom. the second time around i followed the guide except for i flashed the latest cyanogen rom.
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Still waiting for your answer
SaiSantoshD said:
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Click to expand...
Click to collapse
how did you flash the RC29? after pressing the power button
did it give you any errors? once its flashed, reboot by pressing home and back (or w/e the SPL tells you to)
it should boot into the rom
Home button problem (repaired/solved)
Firstly, thanks for responding ..
I had flashed RC29 when it had gone to the tricolor bootloader screen on its own
but after that it would not go anywhere other than recovery(exclamantion mark)
Now good news
4 hours back i opened the phone again(third time) , and took a safety pin and started scraping(gently) the non shiny parts of the connector ( daughter board to main board) .
I think it was previously shorted near that area , so by scraping removed the shorted metal joints .. and now the phone booted up to RC29 (just like that) and i even installed the cyanogen mod ..
Many thanks to u all .. hope this Comes UP in google search for people with similar problems(and there are many)...
KEYwords: Home button stuck on recovery no booting
Ah wow didnt think of that lol.. glad to see you got it to work
Self-titled. I have cyanogens newest, and it actually reboots outta nowhere with dwang's and i was just wondering why it's doing this.
Mine has done this too but I was running Enoch theme and now I'm on the stock 2.0 theme. It's only done it twice but both times the battery was really low. Was yours?
no it hasn't it's just when i do regular stuff it boots itself =/
does it completely reboot (as in back to the T-Mobile G1 black screen) or does it just go back to the animated Android screen?
There are several possiblities that could cause this from a faulty sdcard to the theme that you are running. Hell... even the battery could cause this.
The only way to be sure is to eliminate the possiblities.
Reformat your sdcard/ext partitions.
Wipe your phone
Reflash the rom
If you still have the same problem then it could even be hardware related.
Difficult to tell without the logcat or last_kmsg file (located in /data/dontpanic directory).
Restarts
I just recently moded my phone to cyanogen on G1. Same issue. It actually restarts itself and then goes into droid on skateboard.
Black screen of death. It's what I call it because that's all I get.
Here is a summary of what happened.
1) My Samsung Galaxy S started to get slower and slower. I decided to turn it off and back on (using
the power down button) to see if it would get any faster.
2) I would then only get the first start screen, then the graphic S screen after which it would go
blank (black screen of death). After about 2 min, if I pressed any keys, the two buttons on the bottom
would light up and stay on. If I pressed any one of them, it would go off and back on.
3) I could hold the power button and it would reboot.
So, that's were it was, here is what I have tried so far.
a) Check to see if I could get into download mode. Yep, that works.
b) Check to see if I could get into recovery mode. Yep, that works.
c) Hmmm, oh well, lets do a system wipe. Yep, can do that but it still would not boot up. I just get
to the graphic S screen and then the black screen of death.
d) Lets take the battery out. (over night) Nope, still black screen of death.
Based on the above, a flash should work right. Sorry, but I had a lag fix installed. Well no matter
what, I could not get the phone to boot so I guess I better try flashing anyway.
I've tried several images. Most of them get the error "your storage not prepared yet, please use UI me nu for format and reboot actions" OK, this is because of the lag fix. I then installed stzupy's image and that fixed the "your storage not prepared yet bla, bla bla. But still black screen of death.
I've tried flashing over and over, with pid 512, 513, 803. Nothing. I still come up the black screen of death.
So, can someone guide me in the right direction. I've done searches on this but everyone else seems to have had a different problem. Mostly doing a Factory Reset worked for them. I've done that over and over. After removing the battery, after flashing, before flashing. Nothing seems to get me past the black screen of death.
Thanks in advance for all and any help,
Jeff
p.s. Please don't reply with a message saying something like flash X's kernel. I need descriptive instructions such as flash with "this kernel" into CSC (or pda or modem) using XXX pid while checking repartion (or not). In other words, don't assume I know what I am doing. I don't.
there is now way you can save your apps installed but your sd card files will be there.
Only thing you can do is reflash my friend
webstar1 said:
there is now way you can save your apps installed but your sd card files will be there.
Only thing you can do is reflash my friend
Click to expand...
Click to collapse
Really don't care about my apps. (I have everything backed up onto my computer via Titanium Backup) But if you check my message above, I have reflashed until the cows come home. I still get the black screen of death.
- Jeff
Sorry Jeff Your Samsung Galaxy S is 'Proper F*cked Mate'
Yes sir I believe you are toast indeed! Your internal SD card is probably toast. I believe you're a fine Canadian of course assuming you've got the Bell i9000m? A lot of us have had this and there's a poll on it actually. Mine just toasted out about 2 weeks ago, thankfully i've an awesome friend in Canada on the forum that has helped me out!
No matter what you flash or try to do, it will not mount the sdcard in there or let you format it manually. You'll have to send it back to BELL or Samsung.
BA_Flash_GOD said:
Yes sir I believe you are toast indeed! Your internal SD card is probably toast. I believe you're a fine Canadian of course assuming you've got the Bell i9000m? A lot of us have had this and there's a poll on it actually. Mine just toasted out about 2 weeks ago, thankfully i've an awesome friend in Canada on the forum that has helped me out!
No matter what you flash or try to do, it will not mount the sdcard in there or let you format it manually. You'll have to send it back to BELL or Samsung.
Click to expand...
Click to collapse
Sigh! That's what I've been worried about. Yep, bell i9000m. Oh well, if I gotta, I gotta. Only 1 month old.
- Jeff
Flash stock, then give it back to samsung to repair, they should then
Sent from my GT-I9000 using XDA App
Had the same problem today. Wanted to change from JPA to JPO so thought it best to do a factory reset, but when phone booted up again, it started, then the screen went black with the occasional vibration. Tried all the usual things, removing battery & waiting, wiping cache etc., but no luck. Then put it in download mode & installed JPA again, but same problem on bootup. Thought I had finally managed to brick my phone (horrible feeling). So I solved it this way :-
Installed JM8 using .512 pit with repartition ticked, hooray my phone booted up again. The long delay after the S logo & finally completing boot was nail biting to say the lease. Now everything is working great & I am in the process of installing JPO.