Fisrt let me start by saying hello to one and all great forum.
Right, to my problem i have had my g1 a month now and love it
have not rooted it yet as i have been reading over and over so that when
i do come to do it i wont f**k it up.
I was downloading and installing app from the market and i think i have installed one that is for a rooted phone only(well thats what the discriptive said) i didnt realise this until i had installed it and so i was testing the apps last nite then turned off my phone as usual when i went to bed, Well so turned it on this morning and it wont load past the Android Screen, i tryed to go into bootloader and itsjust a color screen with serial10 on it.
please tell me i havnt bricked my phone i didnt do anything to it
anyone help me please
You did not brick your phone, if worst comes to worst you can go ahead with the rooting steps and download the dreaimg.nbh from your rc package that is meant for your area and boot it through the bootloader
thanks whats happened to it, the serial 10 has now gone and its just the 4 coulours on screen with some text at top, i havnt taken out the battery i thought i might damage it is it ok to remove it
The multi color screen you are describing is the stock bootloader, I prefer people do not pull the battery out if at all possible, your phone is quite similar to a computer, would you unplug your computer when it crashes
no, your right i wouldnt, so really i have not a clue here what should i do now, i actually need this up and running its my only phone thanks
not bieng lazy either dude, trying to search but like i say i dont kow what i have done wrong so dont bnow solution to seach for
Find a thread on rooting your phone, there you can find your rc, and go from there, go ahead and root your phone while you are at it
not bieng funny mate but i dont want to root my phone until i am confident enought to do it, i upgraded this from 1.0 to 1.5 when i got it can i just not do that again with the 1.5 firmware, thanks
Sure, use the steps to downgrade for rooting, then just leave it go and within the next 72 hours you will get the cupcake ota update, so to recap, downgrade, wait for updates
ok, and thanks alot for the advice mate, i will root it but like i said when i understand exactly what i am doing, cheers
No problem, and thank you for taking your time to learn the system and getting familiar with what needs to be done, instead of rushing in and asking common questions
cheers mate, its the only way to learn, thanks again
sorry mate to bother agian, i just tryed to downgrade with 1.0 and white screen comes up it just says "not allowed" really stuck now
Did you do it in the bootloader(tri color screen) did you put the dreaimg.nbh on the root of your sd card and not change it to update.zip
What part of the world are you in so I can make sure you are using the right rc or it is a possiblity that you might have to make a gold card(which is a pain in the ass.....so I hear)
just realised now have to change it to update.zip
I am in Ireland
P.S. just changed the DREAMIMG-RC7.zip to update.zip and it didnt work
do i change the .NBH to update.zip
Nope,do not change it to update.zip, download rc7, extract the .nbh from inside and put it on the root of your sd, then use it through the bootloader
no. did that mate put the nbh on card into bootloader just said "not allowed" sorry for keeping you up man
does it make any difference that i deleted everything of the memory card by the way
i just thought of something this phone was bought in the U.S.A. would this make a difference when i iupdated it
it was with a U.K. 1.5 O/S
Hmmm, is your sdcard formated to fat32, it's the only filesystem that it will read in the bootloader, walk me through what it is doing
yes i formatted it, then copied the files back onto it that i had backed up, then i deleted them all again, so just putting the nbh onto a blank card
then start up the phone and bootloader, white screen comes up with "checking" then comes up "not allowed"
Hmmm....... I wonder why it is not allowing, maybe you are one of the unlucky ones who need a gold card, or maybe we can get a stock cupcake build to work in the recovery since it will be signed by your provider, let me look around a little bit and see if I can dig anything up
Related
I'm not a total noob to rooting as I've already rooted my G1 and am running cyanogen's mods for months now. My problem is on a different phone.
This dream was dropped in water months ago (that's when I purchased my 2nd on craigslist). The touchscreen wouldn't work so I was stuck at the setup screen. I read on many forums, xda included that it might eventually dry out and today I found that it was indeed working fine.
It works fine on stock 1.5 ota update crc1 but now that I rooted one I want this one rooted as well. This is where my problem starts. I'm trying to rollback using the dreaim.nbh found inthe latest "how to root" thread in the dev forum. Problem is I can't load the image. I powe up holding camera and power button, get to the multicolored bootloader, insstructions on the grey/whitish screen say press power button to load, and then I am stuck.
Power button does nothing and the phone is stuck on that screen until I pull the battery. Been through this process 5+ times, with redownloaded image (file is not corrupt) My concern is Ill end up bricking but I really want root. I'm think their might be water damage on the phone but everything else works fine.
Any suggestions for a workaround or a way to troubleshoot the problem? Thanks in advance!
-Air
nbh
heres a link to where you can get the nbh dwnload this one nd try agian.
http://coolpstuts.blogspot.com/2009/07/all-download-links.html
no dice
pistol thanks for the try but it didn't work. same 87.3mb file, rc29, same result.
the greyish white screen loads, but the update (rollback) never starts. Does anyone know of another way to load the dreaim.nbh image? or heard a similar issue?
are you sure you grabbed the t-mo image?? go to the original how to root your phone thread and grab the t-mo image, nothing has changed so there is no reason for us to have an updated thread other than to confuse people even more
my problem is not the rc29 image
tubaking, my problem is not the rc29 dreaim.nbh image. I have consistently found the same image in many threads on xda. my problem is that i cant get it to load. this thread was not created for general rollback issues and def not to confuse people with another how to.... i am trying to figure out why my US G1 (with a noted history of physical abuse) won't load the image.
Was not implying that this thread would be a how-to and confuse people, merely that we have so many and people are constantly asking how to do something even though the steps didn't change. The physical abuse your phone has sustained "should" have no effect on the image flashing. I would suggest you format your card again(not in windows as windows seems to screw up a lot), so long as you are using the correct image and a fat32 formatted card you shouldn't have any problems, does the screen pop up and say "no image found"
airmaxx said:
tubaking, my problem is not the rc29 dreaim.nbh image. I have consistently found the same image in many threads on xda. my problem is that i cant get it to load. this thread was not created for general rollback issues and def not to confuse people with another how to.... i am trying to figure out why my US G1 (with a noted history of physical abuse) won't load the image.
Click to expand...
Click to collapse
hmmm, have you tried re-formatting your card?
trying it now
reformatted at home using gparted but I'll try paragon now that I'm at the office.
tubaking, thanks for the advice and willingness to help. it does not say no image found. It actually shows the steps that it needs to install including, radio_vz, and a few other things i cant recall right now...
hopefully the reformat will do the trick. I will try to format the entire card fat32 for now and then add my ext3 after. reporting back shortly....
still not working
so reformatted again to fat32, used paragon, gparted, and built in format on the G1 still the same result
grey white screen, reads the image.... then stuck at:
Code:
DREAIMG.nbh -
BOOTLOADER -
RECOVERY -
BOOT -
SPLASH1 -
SYSTEM -
USERDATA -
RADIO_VZ -
Press power button
to start update image
Press action button
to cancel update image
and then I'm stuck
So even after you press the power button to start the update, it just stays at that one screen and never gives any "ok"s next to any of the listings?
exactly
no oks, just hangs there
I've been letting it sit since before my last post, about 45 mins so far and still nothing. I may have imagined it but when i did this process last week it felt like it was getting hotter, but still nothing happened
also I remember doing this on my other G1 that is already rooted, so I know how easy this step should be
Stupid question, but are you making sure not to rename the original DREAIMG.nbh to anything else other than what it is? Some people make the mistake of thinking they have to rename it to update.zip or make the mistake of not leaving it in capital letters (although I don't know if that matters). You have said you have downloaded the file multiple times so I doubt this is the case but I'm just spitballing here
no rename
In my desperation I had considered that really stupid idea for a moment but thought better of it. I don't want to end up with a brick i haven't renamed it, consistently used dreaimg.nbh
airmaxx said:
In my desperation I had considered that really stupid idea for a moment but thought better of it. I don't want to end up with a brick i haven't renamed it, consistently used dreaimg.nbh
Click to expand...
Click to collapse
I wasn't suggesting to rename it, I just wanted to make sure that you never had renamed it to anything but the original filename DREAIMG.nbh
its all good
directmatrix, I understood your post. I was just saying i had considered renaming it to update.zip in an effort to get something going. I appreciate the spitballing, maybe we'll hit something that I missed!
airmaxx said:
directmatrix, I understood your post. I was just saying i had considered renaming it to update.zip in an effort to get something going. I appreciate the spitballing, maybe we'll hit something that I missed!
Click to expand...
Click to collapse
I re-read your original post and was curious as to whether the power button could be the culprit considering that its needed to flash the image. Perhaps the water may have damaged the power button interface. I can't imagine that it would be the problem considering your able to get into the rainbow screen via power+camera. Have you tried pushing it harder, many times, on the side etc?
i did, tried holding it for a 10 count, multiple presses, long press. I'm pretty sure the problem is not with the button itself because it works fine when I have the phone booted up and press power to turn it off.
When I first posted I was hoping someone might know of an alternative button combo that might have the same effect of loading the image from that greyish white screen
there is no way to write the image through adb right?
OK this is the deal, i bought a phone off someone from craigslist. i have no idea what this person has done on the phone it came as stock donut. no root or anything of the sort. and there is no way to contact the person to ask what or if they tried to do anything. i have been trying every which way and yes the search bar is my friend. and nothing. ive done this before MULTIPLE times i am not new to rooting and flashing. Everytime ive tried to load something it always says no signature(#), number sign for random file numbers, i have tried to downgrade everything spl, radio and down to rc29, and trying to figure out if i could downgrade the recovery to the original recovery not the 2 (e). ive stumbled upon the idea that i might be missing files. maybe the otacerts i believe. i searched that also and found someone only saying to reinstall rc29 THATS MY PROBLEM I CANT IT WONT LET ME. Please someone help before i bust my head open on my desk.
and sorry about the punctuation typing super fast and avoiding my boss.
No signature usually means the update isnt signed.... and you probably got the update.zip thats corrupt...
Ive tried 3 different downloads of every file aka different dev for each thing. Anything i try and put as Update or even left as Original such as the .nbh it all comes up no sig. is everything online corrupt?
You don't have a root hence no luck on roms.
.nbh is not flashed thru recovery. Put it on your sd, power down your phone and power up holding power and camera buttons. Phone should find DREAIMG.nbh and restore your device to RC29. From there, secure your root and it's business as usual. Good luck.
borodin1 said:
You don't have a root hence no luck on roms.
.nbh is not flashed thru recovery. Put it on your sd, power down your phone and power up holding power and camera buttons. Phone should find DREAIMG.nbh and restore your device to RC29. From there, secure your root and it's business as usual. Good luck.
Click to expand...
Click to collapse
going to try this again
Ok I had the latest 1.61 update (I think that was the version), followed the instructions at
http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_Rooting
To the letter however now I am thinking that I have a rogers dream.
I downgraded to rc 29 and followed the directions flashing with CyanogenMod 4.2.12.2
When booting I get stuck at the g1 boot screen, going into bootloader mode looks different than before instead of the colors I get three android icons at the bottom on a skateboard and in a yellow line says serial IO.
I'm kinda lost at this point can anyone help? I pray I didn't brick my phone.
I'm pretty new to Android, recently switched from WM. Be gentle...
can u go into recovery mode? home + phone button
p.s. mind you that this isnt the proper place to be posting "problems"
wrong section, sorry
i will request it be moved to the correct section where you are more likely to get a useful reply
oops, sorry about the section...I know better than that =( I can access recovery mode. Problem is that sd card is no longer recognized by computer =( Was hoping there was something stupid and small I missed but looks like I'll need to get a new sd card and re-flash update to original.
Are you able to go to recovery console if yes go to recovery console and flash the rom again.
sounds like u killed ur sd card :-x and your sd card is exactly what was allowing the rom to boot... it was a hero rom wasnt it lol
nevermind i reread your post...doesnt sound like a cyan caused problem....but cyanogen requires you to flash something before u flash his newer stuff...you should pay attention to BaconMod's stuff
Did you flash the 1.6OTA update from HTC that is required first?
Well Looks like I killed the sd card somehow. I put the sd card into my camera and back into my phone and works fine now...go figure.
dragonedge said:
Well Looks like I killed the sd card somehow. I put the sd card into my camera and back into my phone and works fine now...go figure.
Click to expand...
Click to collapse
hey add me to my gtalk and i helo u step by step i think i know what u did cuz the same thing happened to me when i rooted the first time and those guys are being rude so if u want my help this is my gtalk [email protected]
Hi guys, my first post here (although have done some reading in the past year) and in dire need of some help. Last night I tried to root my phone. I followed instructions from a sticky post on here, and from another sticky post on another forum.
Before going through how I got there, I'll state what condition my phone is right now, as this may be more reader friendly. I turn on the phone and get the fastboot screen (tricolour). I can reset with call+menu+power. Goes back to bootscreen. Only way to turn off the phone is to remove the battery. If I press trackball+power, a blue LED comes on, the screen stays black. Turning on the phone with camera+power doesn't make a difference. Turning on the phone with home+power doesn't make a difference.
The screen, on turning on, says the following:
'DREA110 PVT 32B RUUNBH
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2000
Serial0'
Before it gets to the screen, the screen briefly flashes white and says
'Loading...
No image file!'
I'll try to decribe what exactly I did leading up to this in as much detail as possible, however it took place from 11pm to 4 30 am, and not fully understanding the whys behind what I did, I may not be able to recall it perfectly. Please ask if I haven't provided enough details. I installed the earliest android software and did the telnet commands through telnet, downloaded on the market. I downloaded an app called root.apk and followed the instructions. I got to 'Step 3 - Protect Root' and it said 'Root Protected'. I then got JesusFreke's 1.5 EU rom and renamed it 'update'(.zip) and placed it in my root SD card directory. I loaded the software on. I THINK the mistake I made was not having the radio image (I don't even know what it is or why I need it) before trying to load it. I've since put it on and it hasn't made a difference.
Anyway, I turned on the phone after the install, and it became stuck on the android screen. At this point, home and power and camera and power both worked to provide me with different boot screens when turning on the phone. I did a hard reset. This brings me to where I am now.
Is my phone bricked? I read on a guide here the difference between soft and hard bricking - from what I understood, this seems to be somewhere in between - hopefully if it's a brick it's a soft brick! Any help would be much appreciated, as we all hate to live without our G1's, lol! Looks like I'll be going back to my Nokia 6210 and trying to send this thing for replacement back to T-mobile. Please help guys!
Many thanks
Michael
search around the forums, as far as i know, if you can get to the fastboot, your g1 isn't bricked
Yep, agreed.
In my old G1 days I had the same problem and it was because I didn't have an image file on my SDcard.
You're not bricked but I've since gone from G1 to Hero to Nexus so I'm not what you need to do but it is SIMPLE, I remember kicking myself when I sorted it.
HTH.
thanks for the prompt response guys. Very relieved to hear that it might not be bricked.
I just tried adding two separate image files (one at a time) to the root directory, but it hasn't made a difference. These are the details of what I added:
First I put in all three of these:
Android 1.5
Radio Image ota-radio-2_22_19_26I.zip 9181622 aeecdb49b74a0d4bb67f9d8af70c1889
System Image signed-dream_devphone_userdebug-img-150275.zip 38027127
5ca85a135ff1ddd41643237577cb8ec4
Recovery Image signed-dream_devphone_userdebug-ota-150275.zip 46907411 01c19785eef97b06409f52fed568feff
and then the system image for 1.6 just in case. Is this a noob mistake? I'm very unfamilar with system images, would be really great if someone could link me to the file I should try and put there for the image file!
Thanks again guys
well since it goes into fastboot, is there a way you can flash the recovery in fastboot, and try from there?
sakumaxp said:
well since it goes into fastboot, is there a way you can flash the recovery in fastboot, and try from there?
Click to expand...
Click to collapse
I'd certainly love to try any ideas how I'd do that? If you let me know i'll do it now. atm i'm not aware of any buttoms/commands which work in fastboot, but I've never used it tbh.
yeah to be honest, im not sure how to do that either, i just remember i was lurking around this forum and i saw a previous thread, that had a similar problem and someone mentioned the tip i gave you, so if any senior members or anyone know how to do this, please explain
Tranquility__89 said:
thanks for the prompt response guys. Very relieved to hear that it might not be bricked.
I just tried adding two separate image files (one at a time) to the root directory, but it hasn't made a difference. These are the details of what I added:
First I put in all three of these:
Android 1.5
Radio Image ota-radio-2_22_19_26I.zip 9181622 aeecdb49b74a0d4bb67f9d8af70c1889
System Image signed-dream_devphone_userdebug-img-150275.zip 38027127
5ca85a135ff1ddd41643237577cb8ec4
Recovery Image signed-dream_devphone_userdebug-ota-150275.zip 46907411 01c19785eef97b06409f52fed568feff
and then the system image for 1.6 just in case. Is this a noob mistake? I'm very unfamilar with system images, would be really great if someone could link me to the file I should try and put there for the image file!
Thanks again guys
Click to expand...
Click to collapse
I may be wrong here (if I am come round and strangle the cat).
But I don't see any .img files?
They are all zips? you need to have the image files UNZIPPED an as .img IRC.
OK, I unzipped the folder and put a folder in the root which had the .img files in them.. still didnt work. because i was trying to put them on to the sdcard through my girlfriends old nokia, it was very slow and kept crashing so the only thing is, i didnt manage to get all 3 unzipped folders on there. would that make a difference?
edit: hope I can still work towards fixing it - i need to check if i have a compatible micro sd card reader when i get back from work! please keep any ideas coming
You need the DREAIMG.nbh on your sdcard. Download the DREAIMG-RC29.zip file, unzip, place DREAIMG.nbh in /sdcard, boot into bootloader, and flash.
i did what cloverdale described on a bricked G1 and it worked just fine , now i need to figure out how to get donut on the mobile
anybody? pm if you can help and TIA
cloverdale said:
You need the DREAIMG.nbh on your sdcard. Download the DREAIMG-RC29.zip file, unzip, place DREAIMG.nbh in /sdcard, boot into bootloader, and flash.
Click to expand...
Click to collapse
Thanks for your reply. I'm downloading this one DREAIMG-RC29.zip
I'll then extract on my computer, isolate the DREAIMG.nbh file and copy it into root of SD card.
Is that correct so far
How do I flash?
Many thanks
Hmm, been doing as much research as I can in the time I have, and it appears I need to type command prompts into the fastboot screen? If someone could tell me exactly what to do, that would be a lifesaver, because I am really missing my G1
I didn't think I was this much of a n00b, but apparently so, heh.
bump.. been doing as much research as possible, but most of my net access atm is from work which has many sides blocked (incl XDA!) and im not entirely sure how to do these things that have been suggested.. if someone could just go into a little bit more detail id be really grateful.
Tranquility__89 said:
Thanks for your reply. I'm downloading this one DREAIMG-RC29.zip
I'll then extract on my computer, isolate the DREAIMG.nbh file and copy it into root of SD card.
Is that correct so far
How do I flash?
Many thanks
Click to expand...
Click to collapse
Once you have extracted DREAIMG.nbh and placed it on the sdcard, all you need to do is power on while holding camera, and the installation should begin (or perhaps it asks you to confirm), and not console is needed. Let it do its work, and when it tells you to reboot, press and hold call+menu+end and you will reboot to RC29.
cloverdale said:
You need the DREAIMG.nbh on your sdcard. Download the DREAIMG-RC29.zip file, unzip, place DREAIMG.nbh in /sdcard, boot into bootloader, and flash.
Click to expand...
Click to collapse
And if that doesn't work I would see if your sdcard is fat32
Thanks guys!!!!!!!!!!! it worked! Much thanks indeed.
There is another problem now though, if anyone can help: I'm doing a manual update to 1.5 (rc8) from 1.0 (rc7) and its getting stuck on the G1 screen and not loading.. not hard bricked or anything, can still access recovery and bootloader.. This thread has more information: http://forum.xda-developers.com/showthread.php?t=625677
thanks again
help please
Hi, my g1 is stuck at the seria10 fastboot screen. It is a US g1 that I purchased rooted. I know enough about these sort of things to get myself into trouble. I removed an app (card game) and my phone then got stuck so I did a battery pull. Now all it will do is either spin on the g1 screen or I can get the three skateboards fastboot screen. I am unsure as to what to do now. I downloaded the rc29 build and put it onto my sd card. I am on a mac so I do not think I use FAT32. I thought putting the rc29 on my sd card and holding the power/send/menu key would tell the device to reboot with the rc29 build. Should I have deleted all the stuff of the sd card? I just want my phone to work - I didn't know the phone was rooted until after I had purchased it from a dude off craigslist. any help is appreciated.
sd card is formatted to fat 16 not 32 according to my diskimage. Help?
brian
bcp0809 said:
Hi, my g1 is stuck at the seria10 fastboot screen. It is a US g1 that I purchased rooted. I know enough about these sort of things to get myself into trouble. I removed an app (card game) and my phone then got stuck so I did a battery pull. Now all it will do is either spin on the g1 screen or I can get the three skateboards fastboot screen. I am unsure as to what to do now. I downloaded the rc29 build and put it onto my sd card. I am on a mac so I do not think I use FAT32. I thought putting the rc29 on my sd card and holding the power/send/menu key would tell the device to reboot with the rc29 build. Should I have deleted all the stuff of the sd card? I just want my phone to work - I didn't know the phone was rooted until after I had purchased it from a dude off craigslist. any help is appreciated.
sd card is formatted to fat 16 not 32 according to my diskimage. Help?
brian
Click to expand...
Click to collapse
Disk utility on a Mac will allow you to format to fat32, you must do this. What happens when you power on the phone while holding down home?
I was able to do the home power thing and wiped the handset then rebooted it. Not sure why it worked this time over any previous times...oh well at least it works. Thank you for your prompt reply.
i . ll just start from the beginning. i installed a jesus freke ROM on my G1, i dont remember what version. i think it was 1.41 or something like that. (RC29 or RC33, idr). i downloaded an app or maybe it was an app that came with the ROM that let me know of jesus freke's updates. i hadnt checked it awhile as the G1 is not my primary device. when i checked for it last week, it showed an update and i attempted to install it. i completely forgot the procedure for updating a new image and im prretty i bricked it because it wont go past the android screen, even after waiting about 10-15 minutes, it still wont go past it. so my question is, can somebody please help me unbrick my G1? im in no hurry as im not using it on a daily basis, but id like to get this resolved as soon as possible so i can sell my G1. anyways, id appreciate it if someone could help. if so, can you give some detailed instructions as im not TOO familiar with android. i know a little about it, but too much.
thanks guys,
josh.
if you can access recovery mode, just go and reinstall other rom, i recommend cyanogenmod - user friendly and it got a complete guide on there website to install.
youll have to expand on that a little more, like i said, im not that familiar with android.. i dont have an SD card in there, and i suppose that might pose a problem trying to flash another ROM to it.. can you give me some links and some specific directions when you have a chance..? i'd greatly appreciate it.
josh_prayyforplagues said:
i . ll just start from the beginning. i installed a jesus freke ROM on my G1, i dont remember what version. i think it was 1.41 or something like that. (RC29 or RC33, idr). i downloaded an app or maybe it was an app that came with the ROM that let me know of jesus freke's updates. i hadnt checked it awhile as the G1 is not my primary device. when i checked for it last week, it showed an update and i attempted to install it. i completely forgot the procedure for updating a new image and im prretty i bricked it because it wont go past the android screen, even after waiting about 10-15 minutes, it still wont go past it. so my question is, can somebody please help me unbrick my G1? im in no hurry as im not using it on a daily basis, but id like to get this resolved as soon as possible so i can sell my G1. anyways, id appreciate it if someone could help. if so, can you give some detailed instructions as im not TOO familiar with android. i know a little about it, but too much.
thanks guys,
josh.
Click to expand...
Click to collapse
This right here is why I say don't root if you don't know wtf you're doing. This always happens to people who should have just stayed away. Look:
Power phone completely off. Hold home key and power on. If you get to the recovery screen (the screen with a bunch of options, probably all written in green for you) then you're not bricked. All you need to do is put latest cyanogenmod on your sdcard, wipe your phone, and install it.