Database Develop

Help Help Help!!!

Hi everyone! I am badly need help to fix my MDA. My MDA stuck when it boot up to T-mobile white screen. I tried to do hard reset by pressing and holding Conn Manager and Voiddial buttons while pressing reset then press Send. I got and message
Format FAT Partition
Format is Failed
Now I am still able to flsh with any ROM but I just doing the same thing, stuck on boot screen. Is it the end of my MDA? Please hel

Is it realy no one can help?
I don't believe that no one can help me even a command.

If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM

If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM

I don't get it
Johnnnnnnnnnny said:
If I have the whole white screen, the device was like in bootloader. Flash can start and than wil all OK..
I think You wrote wrong Start Adress in Your own ROM
Click to expand...
Click to collapse
What should I do? any rom for me to flash to solve this problem?

You could flash any originaly ROM with write IPL/SPL
and quicky. If the battery will turn off. the Wizard will bricked

I flash with right rom
Johnnnnnnnnnny said:
You could flash any originaly ROM with write IPL/SPL
and quicky. If the battery will turn off. the Wizard will bricked
Click to expand...
Click to collapse
I flashed with T-mobile ROM 2.26. It went thru 100% but when the device reboot, It just stuck on the T-mobile boot screen wich saying
IPL: 2.26
SPL: 2.26
GSM: 02.25.11
OS: 2.26.10.2

Finally
Finally I got my MDA fix.

Re: Finally
KhMeRA said:
Finally I got my MDA fix.
Click to expand...
Click to collapse
Please tell everyone what you did to fix your problem.
Molski

he was in bootloader.. He hasn´t brick her phone by wrong xG IPL/SPL

Re: Finally
molski said:
KhMeRA said:
Finally I got my MDA fix.
Click to expand...
Click to collapse
Please tell everyone what you did to fix your problem.
Molski
Click to expand...
Click to collapse
Just follow this link http://forum.xda-developers.com/viewtopic.php?t=62268&start=0&postdays=0&postorder=asc&highlight

please tell us whate happend (fixed or no )

sifreen said:
please tell us whate happend (fixed or no )
Click to expand...
Click to collapse
Read post #8 on the 1st page.

HELP!!! Device (Qtek 9100) dead after upgrading.

Hi, i followed the instruction fro unlocking my device (Qtek 9100) and then installed IPL_SPL_3.08. After that i tried installing Crossbow_Reloaded_1.7_Final and my device rebooted and it now doesn't turn on! I tried removing the battery for a while but still... Is there anything i can do to save my device?
PS: i first installed a 2.xx IPL and SPL but then the "Crossbow_Reloaded_1.7_Final " would not load saying it was incompatible URR version or something similar, so i instaled IPL/SPL 3.08.
My device now won't start or charge. It seems dead Is there abything I can do about it?
thanks

If you didn't figure out your device is G3 or G4, and you can't even power on the device, then it is a brick now. (G4 Wizard cannot upgrade IPL/SPL)
You need to either recover it using JTAG or replace the unit if possible.

thx for the reply.
Firstly i followed this guide:
http://forum.xda-developers.com/showthread.php?t=298613
And at the following step:
"0. First determine if you got a G3 or a G4 device. When you turn on your device from can can see you're IPL and SPL version on the screen. If you got IPL/SPL 1.xx or 2.xx you've got a G3 device. If the IPL/SPL shows 2.xx.xxx1 you've got a G4. Go to step G3.1 if you got a G3 and G4.1 if G4."
My device had 1.xx IPL/SPL and i used "Wizard_Love_2.26.10.2_WWE_Novii_CF2" to update it to 2.26. the procedure was successful.
I then CID-unlocked the device and then flashed to "AKU2" successfully once again.
I then flashed to IPL/SPL 3.08 (since i determined i had a G3 device ) and that's when y device did not start again.
Providing the above can anyone tell e wether there is any way of saving my device?
thanks

starkwong said:
If you didn't figure out your device is G3 or G4, and you can't even power on the device, then it is a brick now. (G4 Wizard cannot upgrade IPL/SPL)
You need to either recover it using JTAG or replace the unit if possible.
Click to expand...
Click to collapse
So it is possible to save my device by using JTAG? (which i don't know what it is yet, so i am going to search the forum a bit to find out).

neochris said:
So it is possible to save my device by using JTAG? (which i don't know what it is yet, so i am going to search the forum a bit to find out).
Click to expand...
Click to collapse
dont put too much hope on this JTAG thing. It is still no details on this yet. Try getting the unit into bootloader mode (3 colour screen) and flash again if possible. If you are not able to get it in to bootloader mode, chances are, you have a bricked.

I took the device to an HTC service store but he said not to expect much and that i would probably need a new mobo. When i hear from him and if the news are bad i will probably try the JTAG thing. Does anyone have some info, links etc about JTAG for Qtek 9100? someplace to start from. If it IS bricked i might as well give it a shot.
Any recommendations always welcome.

neochris said:
I took the device to an HTC service store but he said not to expect much and that i would probably need a new mobo. When i hear from him and if the news are bad i will probably try the JTAG thing. Does anyone have some info, links etc about JTAG for Qtek 9100? someplace to start from. If it IS bricked i might as well give it a shot.
Any recommendations always welcome.
Click to expand...
Click to collapse
Someone posted in the forums in the past few days that they had successfully recovered a Wizard using JTAG, so there is hope.
Edit: The posts are here..
http://forum.xda-developers.com/showpost.php?p=1209390&postcount=137
http://forum.xda-developers.com/showpost.php?p=1209398&postcount=138
I suggest asking nicely for cesarr4 to share the info...
Also, sounds like you had a G3 (since you had a 1.x IPL/SPL to start with) and it sounds like the 3.08 IPL/SPL you flashed maybe was for G4 only..

titus666 said:
Someone posted in the forums in the past few days that they had successfully recovered a Wizard using JTAG, so there is hope.
Edit: The posts are here..
http://forum.xda-developers.com/showpost.php?p=1209390&postcount=137
http://forum.xda-developers.com/showpost.php?p=1209398&postcount=138
I suggest asking nicely for cesarr4 to share the info...
Also, sounds like you had a G3 (since you had a 1.x IPL/SPL to start with) and it sounds like the 3.08 IPL/SPL you flashed maybe was for G4 only..
Click to expand...
Click to collapse
Thanks titus666 . Now i got my hopes up again! I just caled the technician i took my wizard to and he told me there's nothing he could do. (he only could help if the device would turn on apparently, but if it would i could try doing that myself. Wasn't too helpful but i had to try. HTC specialist they say. anyway.)
I just asked cesarr4 for more info and hopefully i will gather enough info and try and fix it myself. Will post my results when i do.
thanks for the replies guys. Much appreciated

Diud you soled the problem?

9100 dead
What's happen?

Dead after Upgrading! Please help!

hi all!
G4 Wizard, CID unlocked.
i tried to upgrade to "RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe", but during the upgrade my pc hung up and now my wizard is dead.
Can´t turn on anymore, soft and hardware reset without success. --> COMPLETLY DEAD!
can anyone help me please?

valiumii said:
hi all!
G4 Wizard, CID unlocked.
i tried to upgrade to "RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe", but during the upgrade my pc hung up and now my wizard is dead.
Can´t turn on anymore, soft and hardware reset without success. --> COMPLETLY DEAD!
can anyone help me please?
Click to expand...
Click to collapse
We can't really help you if you can't at least get into bootloader.
Are you sure your battery has some charge left in it?
Have you tried removing the battery for a few mins then re-inserting and re-powering?
Have you tried a known good battery (one from a friends device or one that you bought from a store?
Does this rom contain G4 bootloaders (ie. was it available when G4 devices hit the streets)? If not you may have flashed G3 bootloaders into your device, in which case your device is dead.
You should only flash G4 safe carrier roms (T-Mobile 2.26, Cingular 2.25) to a G4 device.
If you are ever in doubt as to whether or not a rom is G4 safe you should extract it and repack OS or radio only and make sure that IPL/SPL are not included.

thx for your answer.
i am sure, that the battery has some charge left.
i have no other battery.
i think i have flashed G3 bootloaders into my G4 device.
is there any possibility to reanimate my wizard?

valiumii said:
thx for your answer.
i am sure, that the battery has some charge left.
i have no other battery.
i think i have flashed G3 bootloaders into my G4 device.
is there any possibility to reanimate my wizard?
Click to expand...
Click to collapse
unfortunately if that is the case your at the mercy of a repair shop. The only fix is to have the Mainboard replaced. If you are still under warranty and have made sure that there is no way it will boot up at all under any circumstances you can try to take it in and see if they will replace or repair it. Of course if they get it to boot and see that you did something like flash a custom rom they will charge you full price instead of handling it like a warranty replacement.

Why did you flash a PRODIGY rom to a Wizard? They are compatible in some ways I heard, but I am not sure if they are flashable without doing extra stuff.
Try taking your battery out and plugging in the AC cable... you should get the LED to light up..
Then put the battery back in and put the AC cable back in.. then boot into bootloader mode and flash to official CINGULAR WIZARD ROM...

Madcap180 said:
Why did you flash a PRODIGY rom to a Wizard?
Click to expand...
Click to collapse
don´t ask me, why i was so stupid.
Madcap180 said:
Try taking your battery out and plugging in the AC cable... you should get the LED to light up..
Click to expand...
Click to collapse
No way, LED doesn´t light up
Madcap180 said:
then boot into bootloader mode and flash to official CINGULAR WIZARD ROM
Click to expand...
Click to collapse
This it what i want to do, but it´s not possible to boot into bootloader mode.

Madcap180 said:
Why did you flash a PRODIGY rom to a Wizard? They are compatible in some ways I heard, but I am not sure if they are flashable without doing extra stuff.
Click to expand...
Click to collapse
I believe that Prodigy was the name given to the Wizard while in development stage. This means that the RUU you see hanging around mentioning Prodigy upgrade are apropriate for Wizard because they use same uploader utility (NOT the ROM)

husband bricked wing .....any advice

i have been roming and cooking with my tmobile wing for about a year now so ive become really good at it i have yet to brick my phone.....UNTILL NOW
MY NOOB HUSBAND thought while i was at work and he was using my phone to rom it he didn't know that certin roms go with certin phones so when he put the neo rom onto my tmoble wing he bricked it
i have it into bootloader mode but when i plugh it inot the usb activesync wont reconize it so i am having a hard time hard spl ing it...is the phone useless now or is there a way to fix it. im also getting an rom error. anyone have any advice....

What SPL is it showing? If your phone wasn't HardSPL'ed before, he may have ruined it and nothing will fix it short of changing the motherboard. Try flashing it with the stock RUU if it's not HardSPLed. If it is, try flashing it with your ROM named HERAIMG.nbh and place it in your SD card. Good luck.

on the bootloader screen it shows
ipl 4.10.0002
spl 4.10.0000

hyoungluv said:
on the bootloader screen it shows
ipl 4.10.0002
spl 4.10.0000
Click to expand...
Click to collapse
Sounds like the IPL and SPL are still intact. It's not HardSPL'ed so just try the stock RUU. Not having the green icon on activesync doesn't mean it doesn't see it. It means that it isn't synchronizing.

yup same thing happened to me with my first flash. i used a different rom and thought i bricked. recovered with the stock RUU

divorce him. it's that simple
jkjk
yeah, just RUU it.

lol divorce him thatsfunny, the papers were out but lucky for him i fixed it lol...i shoulda thought of using the stock rom to begin with thanks eveyone for your help and advice

hyoungluv said:
lol divorce him thatsfunny, the papers were out but lucky for him i fixed it lol...i shoulda thought of using the stock rom to begin with thanks eveyone for your help and advice
Click to expand...
Click to collapse
Great to hear that it's working, again! Now, for an important part: So you're a silent personal cook who only cooks for herself? ^_^

No, the most important part is... HARD SPL THAT THING! lol

If mine read
IPL 4.26.0002
SPL 4.26.0000
is that really bad?
Thanks for your help
EDIT:
Thanks God, it isn't. Was able to install TMobile's ROM from Bootloader.
IF others have bricked their Herald/Wing:
1. Download TMobile's ROM from here : http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades (Choose 4.26.531.4)
2. Enter Bootloader on your Wing (Hold in the camera button and then soft reset with your stylus)
3. Run the TMobile ROM.
It worked for me. Hope it does for you too.

restoring a bricked phone

any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.

Was restoring the stockspl succesfull?
What info do you get in bootloader?

The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.

pls dont wast threads
hi
a humble request Kindly dont was threads i have created a specific thread for Q& A on Jade why not post it their pls see below link
i see u have wasted 3 thread which could have been used for a much more usefull purpose this is just my humble request to you i hope u will do the neeful thanks
Note : kindly read the first page u would understand why not to waste threads
http://forum.xda-developers.com/showthread.php?t=534581
orange3g said:
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Click to expand...
Click to collapse

"a humble request Kindly dont was threads" read your thread on that, space taken up whether new thread or reply is the same.

orange3g said:
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
Click to expand...
Click to collapse
Am afraid you have a problem, you should have down it the other way around...first stock ROM then stock SPL.....but this is merely a fact then helping you out, i have absolutely no clue how to go from here...sorry!

Maybe someone who can offer some practical assistance will be along soon ......
@Nirak: yes, I misread it. What a silly thing to do. Do you think HTC can help. The phone is in warranty.

Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....

May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.

Have you tried to flash your rom through the boot loader mode

try this
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck

orange3g said:
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Click to expand...
Click to collapse
Send them a PM, Olipro is not often here, but Cmonex is

haree said:
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
Click to expand...
Click to collapse
Doesn't work because it needs a functioning windows mobile, which I don't have. Mine gets stuck.

thomas01_58 said:
Have you tried to flash your rom through the boot loader mode
Click to expand...
Click to collapse
Yes, nothing happens. The screen is stuck at 0%. I tried using a htc original rom, it got to 1% and said something like not suitable for this device.

I sure this sounds rather silly ,and I am sure you have tried it,have you tried removing the battery and then putting it back again.

Not sure if you tried this already:
Run HardSPL when your phone is in tricolor mode (bootloader?).
Then reflash a stock ROM, also in tricolor mode.
Finally, flash stock SPL.
Hope this helps.

@izzysc: I have tried it (will try again though) in running HardSPL when phone is in tricolor mode. It did not work.

Nirak said:
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
Click to expand...
Click to collapse
I have PMd Cmonex. Thanks.

replied to PM

cmonex said:
replied to PM
Click to expand...
Click to collapse
Tx! had an idea you could help out...