is there any way to take all my old stuff from my old class 4 and put it on my new class 6
including the ext3 partition
need to backup your ext partition?
note: these backup commands must be run while phone is booted, not recovery.
to backup your ext partition to your current directory: adb pull /system/sd/ %CD%\sdbackup
to restore back to sdcard: adb push %CD%\sdbackup /system/sd
^^this is avaliable in the forums u just hav to search around and the normal sdcard i think you just have to mount it n copy it off simple...
Related
hi guys i have a sd card that i formatted with two partitons fat32 and ext/3 and i want to add a swap partiton just incase i want to run a hero rom in the future. i have apps to sd so all of my apps are saved to the memory card so i was wondering if i could add a swap partiton without having to format sd card which reuslt in in me losing all my apps. thanks in advance.
djosiah said:
hi guys i have a sd card that i formatted with two partitons fat32 and ext/3 and i want to add a swap partiton just incase i want to run a hero rom in the future. i have apps to sd so all of my apps are saved to the memory card so i was wondering if i could add a swap partiton without having to format sd card which reuslt in in me losing all my apps. thanks in advance.
Click to expand...
Click to collapse
You can always make a backup of your ext partition and just reformat your card.
supremeteam256 said:
You can always make a backup of your ext partition and just reformat your card.
Click to expand...
Click to collapse
That's probably the easiest solution.
In the recovery console type:
cd sdcard
mkdir app
mkdir app-private
cp /system/sd/app/* /sdcard/app/
cp /system/sd/app-private/* /sdcard/app-private/
Your apps are now on your Fat32 partition, so copy everyrthing in your Fat32 to a folder on your computer. Use parted or whatever you want to add the partitions you want and copy everything back to your fat32
Go back to the recovery console
mount -o rw /dev/block/mmcblk0p2 /system/sd
cp /sdcard/app/* /system/sd/app
cp /sdcard/app-private/* /system/sd/app-private/
And you're done
AdrianK said:
That's probably the easiest solution.
In the recovery console type:
cd sdcard
mkdir app
mkdir app-private
cp /system/sd/app/* /sdcard/app/
cp /system/sd/app-private/* /sdcard/app-private/
Your apps are now on your Fat32 partition, so copy everyrthing in your Fat32 to a folder on your computer. Use parted or whatever you want to add the partitions you want and copy everything back to your fat32
Go back to the recovery console
mount -o rw /dev/block/mmcblk0p2 /system/sd
cp /sdcard/app/* /system/sd/app
cp /sdcard/app-private/* /system/sd/app-private/
And you're done
Click to expand...
Click to collapse
ok thanks for the help
I did apps2sd using the stock 1GB card just to see how it works and now I'm trying to replace that card with a class 6. Is there an easy way to do that without reinstalling all the apps? I'm thinking about making a backup wiht nandroid, and then restore the image after put int the new card.
Will that work?
ROM - Cyanogen 4.0.2
Recovery - Cyanogen v1.4
A nandroid backup will not backup your apps if they are apps2sd, copy your ext partion on your computer and then transfer them to your new card's ext partion then run fix_permissions from the recovery console for any paid apps and fc, oh and wipe your rom and reflash to reset up apps2sd on your new card
To backup your sd partition:
Code:
tar -cvvzf /sdcard/systemsdbackup.tar.gz /system/sd/
and then take the file off your sdcard and copy it to your new one.
To restore your sd partition:
Code:
tar -xvvzf /sdcard/systemsdbackup.tar.gz -C /system/sd/
Or you could just adp pull system/sd \computerdirectory
then cd to computerdirectory and adb push it to system/sd again.
I am running Cynogen Mod 4.1.999.
I have 3 partitions on my stock 1GB microsdhc card.
I want to backup everything and move them to a new microsdhc card that I bought.
Is it possible to transfer the data in all the partitions to the new card without losing my installed apps? I have a friend who only transferred the files that he could see in Windows Explorer to the new microsd card but when he loaded it to his phone, all his apps were gone.
So is it possible to retain what I already have but on a new and larger microsd card?
Help is appreciated.
To move apps off of ext:
adb remount
adb pull system/sd/ %CD%\whateveryouwant
(this pulls everything off of the ext including dalvik which you can delete from the folder and puts it in your user directory. *C:\Users*)
to put back:
adb push %CD%\whateveryouwant /system/sd/
sdcard you just mount and put files into a folder and put them back.
it is not necessary to pull the swap partition.
Hope this helps!
make a ubuntu live cd, run it, mount sd, copy ext partition, put new card in make partitions in gparted since you are there and then copy files over, run fix permissions
simple
The easiest way to do what you're asking is to flash to Amon_RA's latest recovery. He's built-in "Backup and Restore Tool", which essentially does what Nandroid originally did and extended it to the ext partition of your SD card.
Run BART to backup your entire phone from the Recovery Console and you can then replace your SD card, partition it the way you want, and then run BART to restore your entire phone as well.
My HTC Dream currently holds 4.2.5 cyan rom. I would like to change to a higher capacity SD card. Can I just plug in the SD card right away and start using? Is the 4.2.5 cyan rom installed to the phone storage or the SD card?
Do I need to first format the SD card before I use it and if so, format to what version?
are you using apps2sd? If you are not, just plug in the sd card and go. If you are, you are going to need to partition it and reflash more than likely. The rom is stored on the phone, but apps, if you are using apps2sd, is obviously on the sd card, as well as some other things that could prevent it from starting up after the switch.
Yeah using apps2SD, so how should i go about using this new SD card to my phone?
format your new sdcard and copy over all the files from the ext off the old card
Format to which format? Fat32 or?
Erm how do I copy over all the files from the ext off the old card?
Sorry, a noob here.
format the new sd card to have both an FAT32 and EXT3
to backup/restore, you can get an ext viewer such as paragons EXTfs (free) just copy and paste to the new sdcard
B-man007 said:
format the new sd card to have both an FAT32 and EXT3
to backup/restore, you can get an ext viewer such as paragons EXTfs (free) just copy and paste to the new sdcard
Click to expand...
Click to collapse
Sorry, can I check with you, how to format the new sd card to have both an FAT32 and EXT3?
This application paragons EXTfs is a windows application?
Why don't you just format your new sdcard with the Amon_Ra recovery?
Just thinking out loud here and trying to keep it as simple as possible.
Here is what I would do:
Install Amon_Ra recovery (see my signature for the link)
Go to console and enter "switchrom -s YOURROMNAMEHERE"
Wait until it finishes then reboot back into recovery again.
Mount the SDCARD to your computer and copy the directories (to include the switchrom directory) then unmount the card. No need to unplug it yet from the usb port on the computer.
Remove the old SDCARD and replace it with your new (blank) one.
While in the recovery main menu select "Partition" and then "Partition SD".
This should make your FAT32/ext2 partition.
After that has completed mount the SDCARD to the computer and copy the old sdcard data to your new card (FAT32 partition).
Unmount the SDCARD and go to console again.
Type "switchrom -r YOURROMNAMEHERE"
After it has completed then you should now have your app and app_private directories on your EXT2 parition. If you need to convert ext2 to ext3 or 4 simply select those options from the partition menu in the recovery.
If you have anything else stored to your old sdcard's ext partition just adb pull those files. (adb pull /system/sd \backupdirectory)
I think that is probably the easiest way. Just my opinion/advice.
Binary100100 said:
Why don't you just format your new sdcard with the Amon_Ra recovery?
Just thinking out loud here and trying to keep it as simple as possible.
Here is what I would do:
Install Amon_Ra recovery (see my signature for the link)
Go to console and enter "switchrom -s YOURROMNAMEHERE"
Wait until it finishes then reboot back into recovery again.
Mount the SDCARD to your computer and copy the directories (to include the switchrom directory) then unmount the card. No need to unplug it yet from the usb port on the computer.
Remove the old SDCARD and replace it with your new (blank) one.
While in the recovery main menu select "Partition" and then "Partition SD".
This should make your FAT32/ext2 partition.
After that has completed mount the SDCARD to the computer and copy the old sdcard data to your new card (FAT32 partition).
Unmount the SDCARD and go to console again.
Type "switchrom -r YOURROMNAMEHERE"
After it has completed then you should now have your app and app_private directories on your EXT2 parition. If you need to convert ext2 to ext3 or 4 simply select those options from the partition menu in the recovery.
If you have anything else stored to your old sdcard's ext partition just adb pull those files. (adb pull /system/sd \backupdirectory)
I think that is probably the easiest way. Just my opinion/advice.
Click to expand...
Click to collapse
I don't have adb installed, that's why.
bryant_16 said:
I don't have adb installed, that's why.
Click to expand...
Click to collapse
Setup ADB on your computer
Use terminal and copy the directories on your ext
Maybe consider a root file directory application (I suggest SUFBS it's a paid app but very much worth it.)
How do you setup ADB?
Compared to the earlier method, which one will be faster and easier?
Sorry, a noob here.
Look. i'm not trying to be rude but you really need to read links like:
***Informative Links*** - Read before clicking "New Thread"
and if you were to do that instead of using the "noob" excuse (hard to be a noob when you've been using this forum since 2007... but whatever. Not judging.) you would come across this:
[HOW-TO] ADB for Dummies(How-To Learner's Guide)
So... yeah. I'm finished helping for the night. Good luck. No more spoons.
So should I use adb or?
Binary100100 said:
Why don't you just format your new sdcard with the Amon_Ra recovery?
Just thinking out loud here and trying to keep it as simple as possible.
Here is what I would do:
Install Amon_Ra recovery (see my signature for the link)
Go to console and enter "switchrom -s YOURROMNAMEHERE"
Wait until it finishes then reboot back into recovery again.
Mount the SDCARD to your computer and copy the directories (to include the switchrom directory) then unmount the card. No need to unplug it yet from the usb port on the computer.
Remove the old SDCARD and replace it with your new (blank) one.
While in the recovery main menu select "Partition" and then "Partition SD".
This should make your FAT32/ext2 partition.
After that has completed mount the SDCARD to the computer and copy the old sdcard data to your new card (FAT32 partition).
Unmount the SDCARD and go to console again.
Type "switchrom -r YOURROMNAMEHERE"
After it has completed then you should now have your app and app_private directories on your EXT2 parition. If you need to convert ext2 to ext3 or 4 simply select those options from the partition menu in the recovery.
If you have anything else stored to your old sdcard's ext partition just adb pull those files. (adb pull /system/sd \backupdirectory)
I think that is probably the easiest way. Just my opinion/advice.
Click to expand...
Click to collapse
Hi there, is adb absolute necessary here?
Here's what I am looking to accomplish. I wanted a backup sd card just in the event mine goes bad. I ran a search with 'SD Card" in the title and read each thread. Here are my roadblocks.... I installed DiskInternals Linux Reader and although it let me copy the ext3 partition files to my pc, it does not allow me to copy them back to the new card. Partition Manager does not have a 64-bit free version. Installed Ext2 IFS for Windows, however, it refused to see my sd card when mounted. I used RA-dream-v1.5.2 recovery to do a Bart + Ext Backup and verified the ext-backup.tar is on my sd card. I was going to install ADB, however, it doesn't say it works on Windows 7 64-bit. I have already partitioned the new card and have everything copied to the Fat32 partion. How now is the easiest way for me to get the ext-backup.tar untarred to my ext3 partition on the new sd card? Please don't flame me as I have been reading threads since 10 this morning. Thanks for any help!
The best thing I've found for managing the Linux partitions is a GParted Live disc. Just download and burn to a bootable CD. Pop it in and reboot your machine and you're free to do pretty much whatever you want with your SD card partitions without having to worry about Windows getting in the way.
Appreciate it. Gonna try it now. Thank you!
Well, I did as instructed. However, it failed to "Buffer I/O error on device sr0, logical block 57107. Any other way to accomplish what I am looking for?
any possibility that your USB port is flakey? Any way to try it on a differenty machine? I've got one PC that has USB problems and has been known to give similar kinds of error messages.
It seems fine for everything. It's a brand new Dell, only 2 months old. It was kinda freaky when I booted from the cd...lines of text scrolling on my screen for a couple minutes, lol. I was like...this better not be wiping my pc out Then at the end it just died on that error... The one thing I notice in reading threads...people keep giving console commands to do things on the phone using adb, however, I tried and it says adb isn't found... Here is an example. I can't believe there isn't an easy way to do this with so many folks rooted, etc.
----------------------------
best thing to do is this while in recovery, use adb and type
Code:
adb shell mount /system/sd/
adb pull /system/sd/ system_sd_backup
turn off phone, change sd card, go back into recovery, then
Code:
adb shell mount /system/sd/
adb push system_sd_backup /system/sd/
ok so I have copied an EXT from one card to another and this is how you do it. You need to be using RA recovery. Go into your console from recovery and type "bart -e -s EXT" that will create a back up of your EXT in a folder called "bart" on the fat32 partition of your SD card. Plug your phone into your PC and copy the bart folder to the PC. Now take the SD card out of your phone and put in the one that you want to restore the EXT to in. Copy the bart folder from your PC to your new cards fat32 partition. Make sure you partition the new card so that it has an EXT partition on it and then go into the recovery console and type "bart -e -r" it will ask you to select which back up to restore. Input the number for the back up that says "EXT" and restore it.
Joe333x said:
ok so I have copied an EXT from one card to another and this is how you do it. You need to be using RA recovery. Go into your console from recovery and type "bart -e -s EXT" that will create a back up of your EXT in a folder called "bart" on the fat32 partition of your SD card. Plug your phone into your PC and copy the bart folder to the PC. Now take the SD card out of your phone and put in the one that you want to restore the EXT to in. Copy the bart folder from your PC to your new cards fat32 partition. Make sure you partition the new card so that it has an EXT partition on it and then go into the recovery console and type "bart -e -r" it will ask you to select which back up to restore. Input the number for the back up that says "EXT" and restore it.
Click to expand...
Click to collapse
Worked flawlesly! Your help coupled with a PM I received from 'shadowch31' made this seamless. Thanks so much!
I tried to run the BART backup via console, but I keep getting an error message as following:
Storing app data...
tar: empty archive
Error occurred during storing of app data...
tar operation failed.
Do you have enough space on the /sdcard?
Click to expand...
Click to collapse
I have about 4 times more free space on the SD card then my ext-4 partition is. What could be the problem?