Hi,
I got a russian HTC Diamond and wanted to change the rom to english.
I tried to follow the Hard-spl,Radio,Rom procedure to change the Rom,but, I successfully completed the Hard-spl part but white upgrading the radio the phone got stuck and finally i got error 262 Which has something to do with CE.
After some search found that if i Hard spl it again it would be fine. but the issue is, when i try hardspl now , i get error 200 phone not detected.
I have tried numerous ROM and numerous times but the phone boots up in some Russian screen. i can detect the file system and sync using windows sync in vista.
Tried to boot from internal storage but says no ROM file found. Please help me to sort this issue out thanks a lot
Prats
HTC diamond restore
Is there no one who can sort out this query?
Diamond WinCE issues
PLs help me my problem what should I DO ?
Related
Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx
Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?
I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06
Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.
thanks a lot i ll try it right now been waiting for this
OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you
hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'
Hi to everyone.
I've just bought a HTC Diamond on the vodafone network, but need to unlock it as I'm on O2's network.
I've been able to install SPL 1.4 and this shows on the boot loader page.
The problem seems to come when I try and install the 'new' rom. It goes through the whole stage up to 100%. Then on the device it says error code please try again. On my Pc it says error code 226. I've tried it on a windows vista pc, and again on XP. I've also tried it by installing it direct onto the internal storage. This again goes through the installation up to and including 1005, but then come sup with a new screen on the device saying that the update and the radio have both failed to install.
I'd really like to unlock my device and to have a new rom so that I dont have all the vodafone branding.
Like many others, I'm willing to contribute so that research and new software is developed, and I have also read the forums for many hours trying to find a solution to my problem before posting.
Hopefully I can be directed to some help.
Kind regards.
Just to update and incase anyones interested.
I ended up downloading the latest version of the official rom that I could find, then extracted the nbh file using winrar, and installed that from the internal storage which has successfully worked.
Not sure why the other rom image I had wouldn't work, just glad I've got rid of the vodafone bits really.
Regards.
Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????
did you take out your micro sd card out of your phone?
That was my problem...........
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE
tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.
UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!
Moved to X1 Q&A as not Rom Dev
it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?
Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
can some1 please help on this?
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?
IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?
prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
so how do i marked this thread as solved????
OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.
IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......