Hi,
I don't think my question is specific to a rom or a dialer.
I don't want the dialer appears after a call.
I would like to reach the home screen directly without the 5 seconds dialer transition.
Is it possible with a registry tweak or something else please ?
Thanks for all.
This is not a problem for nobody this dialer after a call ?
To be always forced to click on the cross or a hard button to reach the home screen ?
Please tell me a solution if you know it.
I would also like to know if a tweak like this exists...
I'll try to find a way but anyone knowing this is welcome....
Try this registry setting you must create:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
Just push the Home button after the end button is pressed, you wont wait 5 seconds.
kelleci said:
Try this registry setting you must create:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
Click to expand...
Click to collapse
Thanks, i'll try that ASAP
AwaKeN said:
Just push the Home button after the end button is pressed, you wont wait 5 seconds.
Click to expand...
Click to collapse
This is precisely what i want to avoid
Nevertheless thanks for your answer
kelleci said:
Try this registry setting you must create:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
Click to expand...
Click to collapse
Unfortunally this tweak doesn't work, even after a soft reset.
Did it work for you and with which device and rom ?
poussinou69 said:
Unfortunally this tweak doesn't work, even after a soft reset.
Did it work for you and with which device and rom ?
Click to expand...
Click to collapse
My device is diamond and I use nataly 2.7, it works...
Another way:You can install advanced config and you can find in phone tab..
I have to revive this thread cause I am really interested in a tweak like this...
I've tried everything in Advanced Configuration and in Diamond Tweak but there is no tweak for this...
Does anyone know a tweak?
I think it's impossible.
I tried all the tweaks.
Related
Dear All,
Anyone have same problem after change registry key and wait a few mins, but after soft reset a setting can't be save and back to the original key.
Thanks!
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
xplode said:
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
Click to expand...
Click to collapse
Tried same as, use "Resco Registry". Thanks!
xplode said:
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
Click to expand...
Click to collapse
Dear xplode,
I tried more than 10 times still can't memory registry changed. Do you know is any program installed will cause this problem.
Thanks a lot.
You have very strange issue, i do my registry editings with Resco mostly
have you thought about that some software may change the registry entryes or keys on bootup to the way they like, and even if you change them on reboot the entryes are lost
try to change reg's to a clean rom, it is software issue but i am not sure which software makes this
athena99 said:
Anyone have same problem after change registry key and wait a few mins, but after soft reset a setting can't be save and back to the original key.Thanks!
Click to expand...
Click to collapse
Just curious, which registry keys?
There's also a possibility that programs "auto-loading" during startup might be causing the problem.
I've been using the freeware reg editors from PHM & .Fred's Task Manager & both works in "all" of the AKU 3.5 ROMS here.
You may try to install the test cab attached which changes the label of your left & right softkeys to Test1 & Test2 respectively. Changes are effective immediately, soft reset & see if it gets retained.
xplode said:
You have very strange issue, i do my registry editings with Resco mostly
have you thought about that some software may change the registry entryes or keys on bootup to the way they like, and even if you change them on reboot the entryes are lost
try to change reg's to a clean rom, it is software issue but i am not sure which software makes this
Click to expand...
Click to collapse
Thanks xplode, I waiting for you latest 3.5 rom and test it.
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Can you explain what´s in that cab?
shinobi_uk said:
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Click to expand...
Click to collapse
Nothing new here...
You could also easily do it with Diamond Tweak
MonteCristoffOn said:
Nothing new here...
You could also easily do it with Diamond Tweak
Click to expand...
Click to collapse
Actually i found that using DT didn't work either, and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
horstborsch said:
Can you explain what´s in that cab?
Click to expand...
Click to collapse
Four registry tweaks, and a text file. Nothing sinister.
shinobi_uk said:
Actually i found that using DT didn't work either
Click to expand...
Click to collapse
It works for everybody... even on all bepe's ROMs.
and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
Click to expand...
Click to collapse
If so, good luck for making cab for each Diamond tweak...
Cheers.
MonteCristoffOn said:
It works for everybody... even on all bepe's ROMs.
Click to expand...
Click to collapse
Well i applied the tweaks and my screen still went blank when calls connected, I'm happy to test it again as I may have been using an older version.
If so, good luck for making cab for each Diamond tweak...
Cheers.
Click to expand...
Click to collapse
Well actually it's been very easy to achieve by taking registry snapshots, and then using diff on a linux box to find the changes, then import them into a cab file.
So thanks for wishing me luck but it's not required.
Sarcasm breeds sarcasm and frankly i'm slightly ammused that on a forum designed to help users share tips and software, a simple CAB i use after new ROM flashes has created such a hostile response.
I'm not attempting to replace or belittle your tool monte, it's certainly streets ahead of what i can do at the moment, however as bepe's ROM lets me run cabs at build this way is nice and easy for me to ensure that if I need to do a hard reset I can reinstate my registry tweaks during the reset without having to install any additional software.
What's so bad about the screen blanking out during a call?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
The registry tweaks in Advanced Config did not work on my phone either, but this cab did the job. Thanks shinobi_uk
THIS is effing amazing
Been looking for something like this for a looong time, cheers
Brilliant, I'd tried the registry tweaks in the tweaks thread, and advancedconfig without any luck and this cab worked perfectly.
I haven't tried DiamondTweak, looks interesting though.
This works perfectly. Big Thanks!
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
Have you tried to dial a requested code with a blank screen?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
It's not that bad, it just annoys me when I'm phoning numbers where you have a number menu system to get through.
It's strange that it's something no other WM phones I've used have done, yet theres no menu option to disable it.
shinobi_uk said:
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
Click to expand...
Click to collapse
here here...me too
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
If you'll think about it for a moment, during a call we never really need the screen to be active for more than 1 minute or so, from the last time we touched it. If you are calling a digital voice machine (either your voicemail or anything), 99.999% of the time it won't take more than 1 minute between key presses.
The ideal tweak should just make the screen behave like when you're not in a call, meaning the screen reduces brightness after ~30 seconds, and shuts down after ~1 minute. In order to be 100% on the safe side, you could make it shut down after 2 minutes from last key press. BUT, making it never go to sleep is simply a waste of battery if you're doing for example a 30 minutes conversation.
center button and screen back on
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
But i dont think we should discourage anyone from making any kind of cab if they desire.
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
Click to expand...
Click to collapse
Still, it is unnoying to press that damn key every 5 seconds. The screen should shut down after 1-2 minutes, but NOT never.
Noam23 said:
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
Click to expand...
Click to collapse
Thats abosolute BS. It is NOT flawed. If you dont want your screen to stay on just - dont use the CAB. I think most users around here are smart enought to know that keeping the screen on during a call takes a battery hit. If they use the CAB as I intend to they are willing to accept this.
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
u need to install advanced confog tool from Schaps, there is an option to disable device sleep while on call.
CSD connection
The screen also turns itself off when I use a CSD connection for internet access on my device. I assume it's because the phone thinks I'm making a regular phone call, so it turns the display off.
I found that if I load up tomtom in the background, the screen stays on, but after a while, the screen starts to turn itself off for about a second every few seconds, so it has only worked as a temporary solution.
I will give the advanced config tool a try. ty
IDK know about advanced config, but kaiser tweak is a nifty little program to change a lot of settings
Advanced config is just about the same as KaiserTweak.
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
dsoler702 said:
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
Click to expand...
Click to collapse
u should know that Nikagl made some "upgrade" to advanced config tool so it has almost the same tweaks as kaiser tweak.
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
jahrami said:
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
Click to expand...
Click to collapse
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Get it HERE
hotdog53 said:
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Click to expand...
Click to collapse
The advanced config tool should have been the first thing to try. Very helpful app.
Mikulec said:
The advanced config tool should have been the first thing to try. Very helpful app.
Click to expand...
Click to collapse
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
hotdog53 said:
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
Click to expand...
Click to collapse
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
hotdog53 said:
DISREGARD. I found out how.
Thx everyone!
Click to expand...
Click to collapse
ur welcome.
hotdog53 said:
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
Click to expand...
Click to collapse
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
hotdog53 said:
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
Click to expand...
Click to collapse
Here's a screenshot of the phone stay awake tweak.
With the rom I'm using at the moment pressing the end key terminates data connection while with all roms I have used previously it took me to the today screen. I've tried to find an alternate solution to get to today quickly but no luck. Is possible to alter this?
bolasz said:
With the rom I'm using at the moment pressing the end key terminates data connection while with all roms I have used previously it took me to the today screen. I've tried to find an alternate solution to get to today quickly but no luck. Is possible to alter this?
Click to expand...
Click to collapse
on some ROMs, you can double-press the Start Menu hardware key to return to the today screen...see if that works as a quick workaround for your purposes.
Advanced Config has the option to change keymap, under menu\more settings
Not sure if you mean pressing or holding?
ASCIIker said:
on some ROMs, you can double-press the Start Menu hardware key to return to the today screen...see if that works as a quick workaround for your purposes.
Click to expand...
Click to collapse
The problem is that I use wisbar lite for start menu with what this doesn't work.
Any other suggestions?
stylez said:
Advanced Config has the option to change keymap, under menu\more settings
Not sure if you mean pressing or holding?
Click to expand...
Click to collapse
Actually I wouldn't mind either pressing or holding so your idea could work if I only knew the a shortcut that takes me to the today screen.
bolasz said:
Actually I wouldn't mind either pressing or holding so your idea could work if I only knew the a shortcut that takes me to the today screen.
Click to expand...
Click to collapse
I'm not sure but i'm sure someone else will know as the short press to home still has to invoke some file?
stylez said:
...i'm sure someone else will know...
Click to expand...
Click to collapse
That's what I'm also hoping for!
Anybody else?
Well, I didn't find an answer to my original question but managed to map the today screen to a hardware button...
...using Settings/Buttons...
LOL
Hello, im using miri 8.1 premium and i want to remove the "slide down for more options" when i make a call... is this possible??
+1 i hate it!
+1, i really don't like it
yes! Me too, it is the most useless junk ever thought by the HTC ppl! It is annoying, please someone please help us remove it!
And why don't you ask miri for it in is thread instead opening a new one???
speed200 said:
And why don't you ask miri for it in is thread instead opening a new one???
Click to expand...
Click to collapse
Because its not just in Miri's rom, its in more or less all of them now
I want it back to my ROM badly. where is the cab?
+1
i also do not need it, and would like to know how to turn it off
+1.
Its a pain to mute/un-mute during conf calls with this on.
Anyone?
For those users interested to find a solution to disable the curtain, here is the package. Could be a dll or a registry key.
Found a solution
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
sank27 said:
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
Click to expand...
Click to collapse
Maybe you can set it to 0 (zero) to disable it?
kwbr said:
Maybe you can set it to 0 (zero) to disable it?
Click to expand...
Click to collapse
i tried that actually but it still show up
i also tried to delete the whole key "cover"
no luck
solaris10 said:
I want it back to my ROM badly. where is the cab?
Click to expand...
Click to collapse
Me too. any cab availabale?
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
contact managment sux on the standard one
and in-call options are better on the new ones
tiburone said:
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
Click to expand...
Click to collapse
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
Click to expand...
Click to collapse
I had zero issue with the standard one, it was functional and did exactly as one would expect. Topaz dialer hides all options instantly making it absolutely dangerous to try and activate loudspeaker whilst driving . The other issue is landscape view, if using any rotate screen app and having the device in landscape (ie. whilst using GPS apps etc) and receiving a call there is no dialer shown at all!
Surely I am not the only one to notice these problems?
thanks man it helped
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Click to expand...
Click to collapse
thank's. I'll try that - it looks ok.
But no i have a problem - remove the curtain...