Tether a BB to a WM6.5 Wing? - Wing, P4350 Herald Upgrading

This might seem strange, but I would like to be able to tether my Blackberry 8320 to my T-Mobile Wing running WM6.5. I am using the BB for corporate email, but I want to use my Wing for my day to day calling, surfing, etc but I have only one active SIM. I have tried pairing the two and using ICS but I haven't been able to get that to work yet. I'm not sure my pairing is working properly. I can scan and find the BB from the Wing, then I enter the passcodes and it says it connected successfully. But when I look in the list of bluetooth devices it says it's disconnected. When I try to connect it says it failed, check passcode etc. Ironically I just finished fighting the same issue with my BT GPS, only to eventually discover that it does not need to be 'connected' for it to work. I know this forum is not for BB discussion, I was just wondering if anyone has successfully tethered any phone to another WM6.5 phone. Thanks!

Related

Modemlink and Edge question

I tried to search this but the only thing I could find was a thread that walked you through the setup but when I tried it, nothing happened.
Here is what I got:
T-Mobile, T-zones workaround for Edge.
Can I tether my MDA to my laptop via USB cable to use Edge. If so, someone please walk me through it.
Thanks,
M3
I've been trying this too but wasn't very successful. I've tried setting up everything myself from my knowledge, but I guess that wasn't enough.
So I found a program called PDAnet. It is supposed to be an excellent program to do exactly what you're asking- connect GPRS phone to laptop to access internet. Well, I've tried this program but was not successful. For some reason I couldn't get it to work. But do give it a try yourself, it is supposed to be great.
If it works for you, maybe you can share your settings? thanks
I do this all the time, I hate the $9.95 1 day access fee when your in an airport maybe 2 hours if that.
First, ditch the USB cable and link via bluetooth. I only got my USB setup to work once and that after massive messing around. I'm assuming you have bluetooth on your lap top, I've a Dell so your set up may be somewhat different than mine.
First you want to make sure your BT radio is on, all I have to do is right click on the system tray icon and enable radio. Next bring up the BT settings manager and hit make a new connection. On the Com screen in the wizard make sure it's set to discoverable, there is a link under the settings menu bottom of the screen. If this is the first time you've paired the laptop to the Wizard then you'll need to enter the access code, in my case it is 0000 for both. On my laptop I need to go into the manual connection process otherwise it assumes I want to do a file transfer and not a modem connection. Set the connection to dial up modem, if it asks you for a number to dial it is *99# (Tmobile gprs). Thats pretty much it. The only hitch I've found is that I occasionally need to set the wizard to discoverable.
When I want to connect to the internet at admittedly slow GPRS speeds I bring up the BT manager and hit connect, it finds the Wizard, dials it into the GPRS and that's it, I'm tethered and have internet access. It's slow, kind of like a dsl line but for checking emails it's just fine. I used to have a Sierra Aircard which I could pop my SIM into and that worked great and was stable but the new laptop has an express card slot so the Aircard doesnt fit. If you have the older style port and Cingular or Tmobile you can pick these up cheap on ebay.
xdame said:
I've been trying this too but wasn't very successful. I've tried setting up everything myself from my knowledge, but I guess that wasn't enough.
So I found a program called PDAnet. It is supposed to be an excellent program to do exactly what you're asking- connect GPRS phone to laptop to access internet. Well, I've tried this program but was not successful. For some reason I couldn't get it to work. But do give it a try yourself, it is supposed to be great.
If it works for you, maybe you can share your settings? thanks
Click to expand...
Click to collapse
New! Version 1.72 adds support for GSM/GPRS devices such as T-Mobile MDA or Cingular 8125! It also supports Vista and Bluetooth/InfraRed connection through ActiveSync.
^thats from their website. Have you tried it lately?
I'm about to install it myself and try. Will post how it goes.

Blackberry Connect (2 or 4) and WM6

i thought to ope a new thread about this.
i tried to get bb connect on wm6 (at&t) versions 2 and 4.
i didn't get any of them to work.
did sombody succeeded in the meantime?
is there a new version coming up?
hope te hear...
Tried them both too on my 750C w/ WM6, unsuccessful. Right now I am on BBC 4.0.0.90, still not working, getting from: No Connection -> Network Available -> Data Tunnel Available (at this point gets an IP address) -> No connection. The PIN is never generated so BBC is unusable for now. I was following a thread, http://forum.xda-developers.com/showthread.php?t=294218 , tried to modify my AKU version (didn't try to modify the build in the ROM though) w/ no results.
In the mean while, Hermes/ATT 8525 w/ WM6 and BBC 4.0.0.90 works just fine. What are we missing here ? Anyone w/ a clue ?
I am happy that someone opened a thread for this, I hope we'll get a fix.
Thanks,
HC
i've upgraded mine with wm6 non attws , unable to connect on bbc4 as well
does anybody know the latest b uild of the bb connect software (and where to get it)
i have (downloaded from vodafone nl)
blackberry version 4.0.0.67
transport version 4.0.0.70
and does anybody has a list of new features in later releases
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
i'm on 750v wm6.0 vodafone and can't get bbc4 to work
not even 2.1
argh!
pissing me off!
I recommend you just to wait a couple of days with the device switched off. I have a HTC Touch, vodafone, Germany. Downloaded Blackberry 2.1 and 4.0, didn't work. Never got a PIN ("PIN pending"). Read somewhere that it worked after a couple of days, so I switched my device off and was frustrated. I even wanted to sell it on eBay already. After 2 days I switched it on again, and, guess what, I had a PIN in the Blackberry software!!! Then I configured my Touch using BlackBerry Activesync Software, and it's now working!!!!!!!!!!!!!!!!!!!!!!!!! Version 4.0!!!!!!!!!!!!!!!!!!
So my recommendation: Try to wait 48 hours.
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
georgedorn said:
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
Click to expand...
Click to collapse
Wrong. I have been using BBC 4 on my Hermes for months with AT&T and as far as I know the Hermes is supposed to be a "blocked" device. It's not that RIM is blocking it, it's that the software has to be HEX edited to work with WM6. No version of BBC will work on WM6 on the Treo until someone smarter than me can cook up a ROM that is HEX edited to run BBC.
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
BBConnect for WM6
gnyf said:
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
Click to expand...
Click to collapse
I just got this and it works perfectly on my S710. I had got wipe the device and do a fresh install of the application. Give it a shot. Make sure you have an Active Sync connection to your device before trying to install.
http://sems.org/content/download/bbc4/bbconnect_wm6_standard_bb_4.0.0.84.zip
On the AT&T Rom you get Uncertified System Software detected on the install. I assume this is because the S710 is a smartphone rather than a WM device?
Strange thing today on my 750c - Got PIN
Hi all,
It seems that something is changing w/ either RIM or ATT. I installed again today BBC 4.0.0.90 onto my 750c w/ WM6 ATT leaked ROM, after the normal reboot, surprisingly, BBC service connected to the network and I got a PIN. Clearly it said "Connected" on the status tab. Well, I connected the device to my laptop and ran the BBC Desktop, the system was provisioned properly (I think ...), Notes Backend, but now it fails to connect to Blackberry, same symptoms as before, even after multiple soft resets, see comments above. I'll play around some more w/ it and let you all know if I get anything to work. In the mean while, if anyone else has any success, please share ....
Good luck
HC
PS. Posted this in the "Palm Treo 750" forum too ... hope I don't bother anyone
hchickers said:
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
Click to expand...
Click to collapse
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
hb88xx said:
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
Click to expand...
Click to collapse
Still doesn't work. I tried to install/uninstall etc. w/ same results, no connection. I am using the leaked ATT rom which otherwise works fine, no strings mods, just the rom w/o any modifications.
Hope this answers your question.
Good luck,
HC
BB Connect from HTC
Anyone have tried this ?
[email protected] said:
Anyone have tried this ?
Click to expand...
Click to collapse
Just did it, same result, no connection. I am uninstalling it right now. Too bad. Again, I think it has to do w/ the device type not the software itself. I have a 750C w/ leaked ATT rom
Anyone w/ other results ?
Thanks,
HC
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
mils said:
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
Click to expand...
Click to collapse
What kind of device ? 750C or 750V etc.
Thanks,
HC
750V with Vodafone WM6.
Now it flashes with an IP for about a second.

MSN messenger on AT&T Tilt

Newbie here
I have just gotten the AT&T Tilt.
It seems to be working fine overall, however when I am trying to connect to MSN (Live) Messenger through a WiFi connection, it apparently is not allowed, as it says "cannot connect via WiFi connection)...? Is this normal? Is there ANY way to get arround this? I just don't know if I'll keep the PDA plan forever and it would be easier for me to just connect via tha WiFi wherever available.
Thanks in advance.
(I did a search already and did not see any posts regarding this so I assumed no one has this issue...or cares...?
RazrtoTilt said:
Newbie here
I have just gotten the AT&T Tilt.
It seems to be working fine overall, however when I am trying to connect to MSN (Live) Messenger through a WiFi connection, it apparently is not allowed, as it says "cannot connect via WiFi connection)...? Is this normal? Is there ANY way to get arround this? I just don't know if I'll keep the PDA plan forever and it would be easier for me to just connect via tha WiFi wherever available.
Thanks in advance.
(I did a search already and did not see any posts regarding this so I assumed no one has this issue...or cares...?
Click to expand...
Click to collapse
I have the Kaiser (very similar to the tilt) and Messenger works just fine against WiFi. What version do you have?
I was fairly certain the AT&T ROM for the Tilt removed Live messenger.. did you download it from thread on here or something?
The att ROM did remove windows live all together. You would need to install it. I have a feeling he is trying to use the OZIM program which doesn't use data, it uses text messaging. So when you are connected to Wifi it won't connect.
hmm...actually I didn't download/install anything onto the phone yet. It is an AT&T Tilt with no mods (yet)...and when i hit "instant messaging", it has the three messenger programs as icons (AOL, MSN or Live, and Yahoo).
If I do want to install it, where can I go to get it and would that installed version also be using TXTMessaging or data?

WiFi Router HELP!!!

I may sound like a newb but here goes, how do i turn my tilt into a wifi router so i can connect such things as my psp, xbox360, etc. to the internet? Ive read and everyone says theres a program on the phone to do this but i dont see this great program. Im using dutty's newest rom apr 01 and not seeing this wifi router program/app anywhere. Is there a cab for this? Anyone know how to connect such devices to the internet using my phone? I have the unlimited data plan through att. Thanks!
google: wmwifirouter
cheers
pulyka said:
google: wmwifirouter
cheers
Click to expand...
Click to collapse
Hello pulyka, I have this program installed on my Tilt, but my laptop doesn't see the Tilt's wifi connection when the program says its connected.
Am I missing something?
kcrumbley said:
Hello pulyka, I have this program installed on my Tilt, but my laptop doesn't see the Tilt's wifi connection when the program says its connected.
Am I missing something?
Click to expand...
Click to collapse
You aren't the only one. I've never been able to get it to work on my Tilt, when I used to use it all the time on my Mogul.
I hear now this program costs money. If no guarantee for tilt compatibility, can refunds be granted if it doesn't work?
I must say that the IT manager at my job has this program installed on his Tilt and it works fine. He actually used it in a meeting the other day when the main signal was too weak.
He is just so busy that I haven't been able to have him check out my phone, to see what is the problem. So there is some hope for Tilt owners and WMWIFIRouter.
Worked fine on my Tilt running Sleuth 3.0 Rom.
Try the earlier version, it is still free and it works fine (just a little less polished).
I tried the WMWiFiRouter .91 once. My tilt took too long to connect to the ad hoc network so I stop using it. I think that's the problem. You have to wait until your phone to connect to the network before the router starts working.

Kaiser - Blackberry Connect Activation

Hi All,
I have a Kaiser ROM 1.56.405.5 and Radio 1.27.16.21
I installed the BB Connect delivered on CD and checked ... it is the latest version.
I installed the BBC Desktop on PC and also checked .. it is the latest version.
My mobile operator has already activated my SIM card for BB and it is working because I have the service always connected, I got a PIN and an IP address is always available.
Now, coming to the activation, I had my IT managers who make my email BB enabled and got a password (MS Exchange).
The Blackberry Entrepise Service is activated on the BBC and everything seems working.
As I was not able to activate my email with the given password, I read in several threads that we can do it through the PC with the BBC Desktop.
I did it and it worked .... miracle!
Sending and recieving emails when connected to the PC is perfectly working.
But sending and recieving emails when standalone through wireless is impossible. My email is visible and seems activated on Kaiser BBC.
Eventhough the radio tunnel seems to be connected and active (either on EDGE or 3G), no way to have it working normally.
Question 1:
Can my mobile operator be blocking the usage of HTC on the network in order to oblige buying a BB handset?
If yes, why do I have a Radio BB Connection always active?
Question 2:
Do I need for a while before getting my email "really" activated by BB?
Is it linked to the fact that I never succeed to use the password given by my IT people?
Question 3:
Is it possible that I need to configure my GPRS connection? I read somewhere that the APN could be different and sometimes we need to chaneg the registery keys. My understand was that this is needed for older versions of BBC.
I am just trying to understand whether I have to shoot on my IT people (they will not like it because of the policy: Nothing else that BB handsets!) or to shoot on my mobile operator who can also have the same policy.
Thanks for your help.
Marko
I have always had to use the blackberry desktop to provision a blackberry connect device for bes.
Check your settings and connections. You should have a connection for blackberry.
You also should have a blackberry icon at the bottom right of your home screen. Click this and check your blackberry settings such as identity (pin, imei, ip address), status (connected), email settings, services (some of the individual services have settings which you should check).
Hi
Yes everything you said is OK
What are the settings for the services?
I have no clue.
One of them is not running: IPPP for 5 click [IPPP] !!
Thx
Marko
Is your ROM a 6.1 ROM? I can't tell by just the numbers. If it is Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
Not sure why 6.1 does that but it worked for me.
Thanks to Dutty for the above instructions
my ROM ver is 1.56.405.5 Radio is 1.27.16.21
Register is OK
What should I do with the password given by my IT guys? I didn't use it.
THX
Marko
Hehe
Just found out that my ROM is WM 6.0 can it come from this ?
Thx
Marko
I used the BB Connect software on my pc, clicked configure handset and it did all the work for me, I didn't need to enter a password.
You might need to go into BB security and set a password for the handset.
Hi
I flashed a new ROM with 6.1 on my Kaiser.
BBC version .100
Radio is ok and got PIN
BBC Desktop configured my the balckberry services on Kaiser.
Even, sent and recieved email when connected to PC with BBC Desktop.
BUT ... when I am on wireles, no way to make it working.
Thx for your help.
Marko
Guys,
It was my provider. Now everything seems working even in roaming.
They put me on BIS and when I asked for BES, they proposed to me a new thing: BB Multinational.
Just be careful all, there is not only BIS and BES but also BB Multinational with some providers.
Cheers.
Marko

Categories

Resources