Database Develop

Could someone with Android and AT&T please send me a copy of their default.txt?

I am not sure what exactly goes where and I'm tired of messing with it.
This is what I'm looking at:
#alloctest 0x2000
set RAMSIZE 0x07000000
set RAMADDR 0x10000000
set FBDURINGBOOT 0
set MTYPE 1553
set KERNEL zImage
set initrd initrd.gz
#
# The following kernel parameters are useful
# ppp.username - The username used to connect to the network when dialing
# ppp.password - The password used to connect to the network when dialing
# ppp.apn - Set apn of your provider
# ppp.nostart - Set ppp.nostart=1 to disable starting the ppp connection on boot
# msm_sdcc.msmsdcc_fmax - The maximum frequency (in Hz) used by the SD controller
# pm.sleep_mode - The mode used when the phone is off
# 0=Power Collapse Suspend, 1=Power Collapse, 2=Apps Sleep,
# 3=Slow Clock and Wait for Interrupt 4=Wait for Interrupt
# Default is 1, use 1 for best power savings
# board-htckaiser.panel_type - Panel type used to power the panel off and on
# 0=Don't power off the panel (Default)
# 1=Sony 2=Topoly 3=Topoly (probably just the same as 2)
# lcd.density - Defaults to 160, 128 shows more on screen
#
set cmdline "board-htckaiser.panel_type=0 ppp.apn=www.vodafone.net.nz ppp.username=none ppp.password=none pm.sleep_mode=1 mddi.width=324 mddi.height=432 no_console_suspend board-kaiser-keypad.atttilt=0"
boot
Please just send me the file to [email protected]

C'mon, search the wiki. It took me a whole 30 sec to find this!
set RAMSIZE 0x07000000
set RAMADDR 0x10000000
set FBDURINGBOOT 0
set MTYPE 1553
set KERNEL zImage
set initrd "\Storage Card\initrd.gz"
set cmdline "[email protected] ppp.password=CINGULAR1 board-kaiser-keypad.atttilt=0 pm.sleep_mode=4 board-htcvogue.panel_type=0 msm_sdcc.msmsdcc_fmax=20000000 no_console_suspend"
boot
Click to expand...
Click to collapse
Dave

Still not connecting to internet. Do I need to erase all the other stuff out of the middle?

Do you need to ask this in another thread?

DaveTheTytnIIGuy said:
C'mon, search the wiki. It took me a whole 30 sec to find this!
Dave
Click to expand...
Click to collapse
Thanks. It worked. However, now all the icons and fonts are huge. I have to zoom out every time I go to a new page. Plus my dialing pad numbers are all smushed together and the home screen icons as well.

[HELP, MIUI, BOOTANIMATION] Droid Razr BootAnimation On MIUI

Hi Help! All Droid Bootanimations, are very slow with MIUI, how or who can help me modify it to be normal/fast?,
This is the new dorid razr bootanimation, but with MIUI is very slow.......
This is the bootanimation http://www.droid-life.com/2011/11/02/download-droid-razr-boot-animation-and-sounds/
DESC.TXT
# 540 wide, 960 tall 15 frames per second
540 960 15
# p means we're defining a part
# first number is repeat count, 0 means infinite
# second number is delay in frames before performing the next part
# so if you are playing 15 frames a second 15 would be... one second
# string defines the directory to load files from
# files will be loaded in order but names don't matter
# s defines a sound for a part
# sounds will be loaded from /system/media
# oggs with loop points will loop automatically
# only one sound will play at a time
# timing is driven by the part, not the sounds
# if you want no sound, leave blank
# droid
p 1 7 01_droid
# mobility
p 1 0 02_mobility
s droidhd.ogg
# loop
p 0 0 03_loop

i'd love to use this if any of you clever boffins can get it working on miui

APEX.7 i open on my phone with es explorer old flash theme and get him .zip then i open it on pc and put to him droid raxr boot animation then i install it in recovery and wala-wala!)

[TUT] Build.prop Modifications how to !

Hello all from research and test o my rom dev discovered this and want share it with all can help ^^
The following lines in the build.prop file can be added and edited to change several properties in your device:
debug.sf.hw = 1
Render UI with GPU (relieves pressure on CPU)
dalvik.vm.heapsize = 32m
Set size of Dalvik VM heap (how much RAM each instance of the VM is allowed); depending on how much RAM that is available to a device, this can be increased.
persist.adb.notify = 0
Stop debugging icon from appearing in status bar
windowsmgr.max_events_per_sec = 120
Increase to improve scrolling response
persist.sys.use_dithering = 0
Do not use surface dithering (surface dithering improves image quality)
debug.sf.nobootanimation = 1
Disable boot animation
ro.HOME_APP_ADJ = 1
force home launcher into memory
ro.sf.lcd_density = 240
Set screen density; change according to your device or what suits you, a lower value will display more but may be too small to use on a device with a smaller screen. Also note that changing the pixel density will make some applications in the new market ‘incompatible with your device’.
mot.proximity.delay = 150
Lower to fix black screen after calls issue
ro.telephony.call_ring.delay = 0
Decrease dialling out delay
ro.gsm.2nd_data_retry_config = max/_retries=3, 2000, 2000, 2000
Change MMS APN retry timer from 5s to 2s
wifi.supplicant_scan_interval = 120
ro.ril.disable.power.collapse = 0
pm.sleep_mode = 1
Increase battery saving potential
ro.com.android.dataroaming=true
Enables data-roaming by default in the build
ro.com.android.dateformat=dd-MM-yyyy
Changes default date format to day-month-year
ro.config.alarm_alert=*.ogg
ro.config.ringtone=*.ogg
ro.config.notification_sound=*.ogg
Changes the default sounds for each item. Must correlate to ogg files available in /system/media/audio/
ro.build.display.id=NAMEOFROM
In Settings>About Phone, it lists the name of the build number. This is where you set it.
ro.product.locale.language=en
ro.product.locale.region=GB
Sets the default region and language. You must have the correct letter combo, and the language must be available for this to work.
video.accelerate.hw=1 or 0
Whether to use hardware acceleration to render videos, doesn’t work on all devices​

Some of those lines are missing from my build.prop. Can I place them anywhere in my build.prop or not?

jayrome876 said:
Some of those lines are missing from my build.prop. Can I place them anywhere in my build.prop or not?
Click to expand...
Click to collapse
yes after all line add thos you want

GPS.Conf file

I've been having constant problems with the gps on my phone. If I TOT back to 11a, gps is ok. Nothing stellar but seems to get a fix after a spell.
If I take the OTA 12b my GPS goes to hell. Fix takes 1 min + sometimes. Looking through the threads I've tried and attacked the gps issue with everything everyone had to offer.... In one fix found from the Samsung Galaxy SIII forum, by editing the gps.conf file to focus the search to only US and North America servers you can speed up the fix. Makes sense to me.
In reading the code for my stock GPS.conf I see ntp_servers for Korea, Europe, asia, Japan, and North america.
For each server there is a description enclosed in hashtags: #Asia# #Korea# #Europe#
For my limited coding experience I'd assume the hashtags prevent that content from being read, allowing the coder to leave a comment or descriptor within the hashtags.
That being said, why doesn't the north america title have a second hashtag?
Mine reads like this from OTA 12b:
#Test
# NTP_SERVER=time.gpsonextra.net
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
NTP_SERVER=north-america.pool.ntp.org
#Korea
# NTP_SERVER=0.kr.pool.ntp.org
What language is being used here? Does the hashtag matter or is it unneeded? Because if it does matter, then the correct north america server isn't being read. It's being obscured by the hashtags and being read wrong.
I went into the file using file explorer, "open in text editor", and added just a hashtag after the north america. I went from sitting and watching the gps status and toolbox endlessly look for a fix to grabbing satellites after a few seconds.
Am I crazy?

Here is my VZN g2 GPS.conf. Much better lock time.
#Uncommenting these urls would only enable
#the power up auto injection and force injection(test case).
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
#NTP Server- This server chooses the closet geographical server in your region.
NTP_SERVER=time.nist.gov
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
#DEBUG_LEVEL = 3
DEBUG_LEVEL = 2
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=1
# supl version 1.0
#SUPL_VER=0x10000
# supl version 2.0
SUPL_VER=0x20000
# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# GEOFENCE = 0x20
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
CAPABILITIES=0x31
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_SECURE_PORT=7278
SUPL_NO_SECURE_PORT=3425
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
#LPP_PROFILE = 0
LPP_PROFILE = 3
################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
#NMEA_PROVIDER=0
NMEA_PROVIDER=1
##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LLP Uplane
A_GLONASS_POS_PROTOCOL_SELECT = 0x1
################################
# LGE EXTRA SETTINGS
################################
VENDOR=VZW
LGE_TLS_MODE=1
LGE_GPS_POSITION_MODE=0
Sent from my VS980 4G using XDA Premium 4 mobile app

The # is used to cmment out the line which means it's not considered in the conf file.
Sent from my VS980 4G using XDA Premium 4 mobile app

jrgilbert79 said:
The # is used to cmment out the line which means it's not considered in the conf file.
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So as long as the beginning of the line has the #, whatever follows is ignored? No closing # is needed?
Not like C+ where a line would begin ( and then at the end have the closing )?
What language is this written in? Do you need a special app to modify?
It seems when I open the file in either the text editor of root explorer or notepad there are no returns at the end of the line. Just spaces.

cdangerb said:
So as long as the beginning of the line has the #, whatever follows is ignored? No closing # is needed?
Not like C+ where a line would begin ( and then at the end have the closing )?
What language is this written in? Do you need a special app to modify?
It seems when I open the file in either the text editor of root explorer or notepad there are no returns at the end of the line. Just spaces.
Click to expand...
Click to collapse
no idea what language it is, but it's standard in config files throughout android and a lot of windows even. closing hashes aren't needed, however returns are. idk if its your editor not reading the returns but they're necessary. i wouldn't worry too much, its known that jellybean causes painfully slow gps locks on some g2s regardless of the gps config... hashes are usually used like this:
#title of the program
#explanation of the file
#explanation of the line bellow
actual code to be read
#explanation of the line bellow
#optional code that can be enabled by taking out the hash
so your gps conf is set up for north america which makes sense for a verizon phone, with the servers for all other continents commented out which arent necessary. there are apps out there though that can add better servers onto the file if you're rooted.
Sent from my LG-VS980 using xda app-developers app

Is there any way to make the gps config flashable/easy to install because I don't see some of the data in the config file.

[APP] CpuFloat [March27] Floating cpu, gpu, temperatures, deep sleep, network monitor

CpuFloat
Uses a floating window or the status bar to show
# the cpu frequencies
# the cpu temperature if (available)
# the text will turn red when the cpu temperature rises above the throttle temperature. You can set custom throttle temperature in preferences.
# the gpu frequency
# Gpu load; not normalised
# the gpu temperature if (available)
# the text will turn red when the gpu temperature rises above the throttle temperature.
# awake time; the time the phone has been awake since starting the app
# deep sleep time; the time the phone has been asleep since starting the app
# battery current
# battery current
# current upload and download speed
In preferences you can choose
# floating window layout; vertical or horizontal layout
# to show the window in the status bar instead of a floating window
# the categories to monitor; all, cpu, gpu, time, network
# which temperature sensor to use for cpu and gpu temperature
# to show the temperature in Fahrenheit instead of Celsius
# cpu throttle point; cpu temperature when the text should turn red
The app uses following permissions:
"android.permission.SYSTEM_ALERT_WINDOW" Needed for floating window, draw over other windows.
"android.permission.READ_EXTERNAL_STORAGE" Read data to show e.g. Cpu frequency, temperature etc.
"android.permission.VIBRATE"
Credits to:
CM Calculator apk for user interface logic
@m11kkaa for temperature file paths and thread http://forum.xda-developers.com/xposed/modules/mod-cputemp-statusbar-t2494170
@existz for awake and deep sleep time method http://forum.xda-developers.com/google-nexus-5/themes-apps/app-cpu-spy-material-v1-0-t2948627
@Grarak for GPU frequency file paths http://forum.xda-developers.com/android/apps-games/app-kernel-adiutor-t2986129
consp1racy for SeekBarPreference https://github.com/consp1racy/android-support-preference
The Tester for catching exceptions and throwing ideas
For automatic updates:

Request
If you´d like to use the app in your native language, you can!
How?
Download the string resource file, copy it and the translate the underlined part, for example
<string name="settings">Settings</string>
becomes
<string name="settings">Instellingen</string>
and post it in this thread.
Thanks!
ChangeLog:
March 17
-startup bug, thanks to Bryan
-GPU frequency on some devices
+battery temperature
Older changelogs:
September 26
- bugs
+ battery current correction
+ clear data dialog in case of fatal crash
September 24
+ battery current monitor
+ notification; enable if CpuFloat suddenly disappears
+ set monitor defaults
+use android M (6) permissions
+important notice about app permissions for android M (6) and up
+transparent background
+GPU trippoint
+ changelog
- some bugs
June 14
Fixed crash
Improve right to left layout
June 12
Added
#Text size
#Show window on the navigation bar
#Update interval (100ms - 3000ms)
#Number of CPUs to monitor
#First time helpful animation
#About screen
#Now on Google Play Store
Fixes and improvements
#Don´t update when the screen is off
#Don´t kill service when changing the window layout
#Language in settings
#Support more GPUs
#Use SeekBarPreferences in settings
November 12
# added some animations
# 'material' window look
# layout changes in case of more than 7 cpu cores
# broadcast listener for landscape/ portrait change
in preferences
# turn on/off vibration
# restore default values
November 3
# user interface logic
November 1
# fixed preference bugs
October 31
# manually set which temperature sensor to use for the cpu and gpu temperature
October 25
# hopefully fixed force close on start
October 23
# fix bug, window not showing on start
# custom cpu temperature trippoint in preferences
October 19
# used some icons instead of text
# option to show window in status bar
October 17
# started to make it work on other phones
# cpu and gpu temperature file info in preferences
October 14
# more layout options
# bugs and performance fixes
October 11
# no more StandOutWindow library
# no notification
# improved long press detection
October 4
# monitor up and download speed
# option to show the temperature in Fahrenheit
October 1
# warning in case the temperature reaches the throttle temperature of cpu or gpu
# tap app window to close
# long press app window for preferences
Preferences:
# choose horizontal / vertical layout
# choose what to monitor
September 27
# rewritten to make it easier to use on other phones
# new app icon
# smaller window
//TODO make preferences

Very nice app.
Thanks dude

That's a nice idea. The app is working without problems as far as I can tell. Great job man!
Sent from my OPO running Sultanxda's CM 12.1

Amazing app! Thanks man!

Nice app

Nice app - similar to the one developed by Chainfire (called Perfmon) but this one shows you the awake time and the temps.
Thank you for this

update:
# rewritten to make it easier to use on other phones
# new app icon
# smaller window

Nice app. Would be nice to have a widget like that.
Sent from my Oneplus One using XDA Free mobile app

Update
# warning in case the temperature reaches the throttle temperature of cpu or gpu
# tap app window to close
# long press app window for preferences
Preferences:
# choose horizontal / vertical layout
# choose what to monitor

Bugfix
Temperature warning not showing in horizontal layout

Thank you for this! Really helpful for monitoring governor and hotplug.

Update
Rewritten
Much smaller now
# no notification
# no more StandOutWindow library
# improved long press detection
Because of a change in package name,
please delete previous version, else you'll end up with 2

waterdaan said:
Update
Rewritten
Much smaller now
# no notification
# no more StandOutWindow library
# improved long press detection
Because of a change in package name,
please delete previous version, else you'll end up with 2
Click to expand...
Click to collapse
Very nice.
Thank you

arifqur said:
Very nice.
Thank you
Click to expand...
Click to collapse
Thanks for the positive reactions
Update
# more layout options
# bugs and performance fixes

Update
# started to make it work on other phones
# cpu and gpu temperature file info in preferences
Request
I'm trying to get the app to work on other phones, so if you have another phone, please test what's working.
If there's no cpu temperature, that probably means that the app can't find the temperature files. These are not the same on every phone.
If the phone is rooted, you can help me by copying and pasting below code in command line, with for example this app https://play.google.com/store/apps/details?id=jackpal.androidterm
And posting the outcome here, so I can add the missing file.
Code:
su
find /sys -type f -name *temp* -print0|while read -d $'\0' f;
do printf "$f= "&&cat "$f";done;
Thanks!
Gpu temperature is a bit more difficult, because you need to find out which temperature sensor is for the gpu, I found that information for the oneplus in
/etc/thermal-engine-8974.conf
Reported working on:
OnePlus fully working
Moto X gpu temperature not working
Samsung S4 gpu temperature not working
Thank you!!

Update
# used some icons instead of text
# option to show window in status bar
Edit
The app is fully working on the Sony Z3 Compact, it even uses the same files for cpu temperature and gpu temperature, maybe because it also has a snapdragon 801, but I'm not sure about that.

I must be missing something but how do I reopen the window after having tapped on it to close it?
Because opening the app from the drawer takes me to the preferences screen.

Killerkip said:
I must be missing something but how do i reopen the window after having tapped on it to close it?
because opening the app from the drawer takes me to the preferences screen.
Click to expand...
Click to collapse
You're right, that's not very clear, I'll see if I can change that.
For now just change something in the preference screen and a new window will open.
Thank you for your reaction

Update
# fix bug, window not showing on start @Killerkip
# custom cpu temperature trippoint in preferences