My kaisers power button has split in half on me, Im wondering if i can change the PTT button to be the power button thru maybe a registry change or possibly another alternative. As u kno the power button blacks the screen and locks it so u cant push buttons, and i really dont want to dial in my pocket. Can someone please help me???? I dont want to throw away a prefectly good phone bcuz of a poorly made button. Thank you guys
well i took my phone apart and swapped the camera buton for the power button, but who knows how long this one will last. Does anyone know of any reg hacks, or software that will lock the phone on a button press maybe PTT button?
Very good that you have the technical ability to do what you did
In order to not use the power button so much I advise you to install a lock utility like S2U2 for example (I suggest it because I use it and it has a very nice interface). There are also smaller and lighter apps around. Just have a look.
In addition to that you have to change the key lock settings of the phone to "lock keys if phone is locked". This will enable you to wake the phone up with any key on the phone. In order to not activate any functions of the phone with this setting you have to set the timeout of S2U2 on wakeup to 0. This way S2U2 kicks in before any of the key functions come in.
By doing these things I am able to have a phone that does not dial in my pocket and I do not use the power button to wake it up. I use the wheel.
I hope this helps.
Related
The hardware power button on the Kaiser is the worst I've ever used... (Do HTC actually do any user-testing?)
Can anyone point me in the direction of source code or an application that will re-map the power (on/off) to another hardware button? The rather useless "OK" button next to the scroll-wheel would be a nice alternative.
I'm aware of one or two applications that will suspend a pocket pc (which you can obviously map to a hardware button) but none that will allow bringing the device out of suspend via a specific, designated button.
Cheers,
Steve
I quite like the position of the on/off button it makes sure that you dont switch the phone on/off without meaning to, the camera button to me seems a tad too prominent and lends to getting caught more so than most buttons but thats what the soft lock is for (press and hold red phone, for those that didn't know).
I am pretty sure there are going to be means to do what you want but not until the phones are more discovered.
Russ
Thanks.
I'm aware of the option to lock the thing with the call-end button. But that doesn't turn the phone off...
In the past I've stuffed PDAs into the waterproof plastic cases you can buy for navgational use outdoors, but the power button on the Kaiser is so inaccessible that using it in one of these cases makes turning it on or off pretty much impossible.
The ideal solution would be some software that maps to the centre button of the D-Pad, with a press-and-hold turning the device on and off. I could write the necessary code to map the button and turn the phone off, but I've no idea what's neccessary to turn it on again!
Steve
Steve is right!
I'd pay for a utility that gave me _full_ access to remap _all_ of the buttons to _any_ function including power.
Does anyone have the reg code to access the "inaccessible" buttons on the Tilt (I don't want to install a different rom, but I don't mind editing the registry...)
tia
I have searched, but I have been unable to find a solution to my problem.
During my searches, I have discovered that many people, like myself, often struggle finding and pressing the power button to turn on and off the screen/phone.
I current use S2U2, which is a great piece of software, and even better since it is free. I use S2U2 to wake my phone up. I have set my settings to not lock the phone when device is off so to unlock/wake my phone I simply press any of the hardware buttons, and I see the S2U2 screen.
However, turning the screen off/putting it in standby is more of a hassle since I have to try and track down the tiny power button. I have downloaded and tried several free remapping programs but none of them allow me to remap a hardware button to standby/lock the phone. Generally, they only allow me to remap a hardware button to a program or setting other than standby/lock.
I would like to know if there was a way to remap a button to put the phone in standby.
I use BlackMe , more info on the website...
You could also try putting some "puffy" paint on the power button. It's that 3D paint people put on shirts etc. that bulges up when it dries. It makes a nice little bead to hit rather than trying to press the little power button.
The Reaper said:
I use BlackMe , more info on the website...
Click to expand...
Click to collapse
Does this program put the Tilt into SLEEP/STANDBY or just blank the screen. The author does not make this clear.
it just blanks the screen. I will keep up with this thread though, I have always wanted my PTT button to be my power button.....
yeah, me too. I am surprised that there isn't a solution yet....
I've always hated the hard to find power button as well. The PTT button is so easy to find and press, yet I've never, ever, not once accidentally pressed it. Why can't the power button be as raised up as the PTT one? I've seriously considered taking my phone apart and machining a replacement power button that stuck out farther. I'd probably make it out of aluminum to make it look cool, too.
But I'd be plenty happy in the mean time with remapping my PTT button to be a power button...
Yeah, I don't even need all the power button powers... I know the power button is used to do other things other than turn the screen on and off... I just want to use another button to turn the screen on and off and suspend the phone...
SPB Mobile Shell allows you to toggle the screen, suspend and many other options. I don't know if I would purchase the program just for it's button enhancing ability though.
Correction SPB Pocket Plus not SPB Mobile Shell
You could also check out AE Software at http://ae.inc.ru/
I dont know if this is kind of what you guys want, but heres my 2 cents. Go here to this thread http://forum.xda-developers.com/showthread.php?t=431328&page=4 and download Dave Shaw's awesome remake of psShutXP in post #34 (its the newest version)
Install to your MAIN DEVICE cuz thats where these shortcuts point to, then pick one of the 2 shortcuts I provided and just drop them in your main \Windows folder.
Hold down PTT button
Long_PTT
Quick push of PTT button
Short_PTT
Now, you can either just quickly push the PTT button or hold it down (depending on which shortcut you chose) and xdaShutdown will pop up giving you the option to RESTART,SLEEP/SCREEN OFF, or COMPLETELY SHUTDOWN your phone.
So essentially now, the PTT is your new power button. To put in standby mode just 2 button pushes is required. 1 push on the PTT button, then another tap on the Sleep button.
But if your really lazy and just want to be able to push PTT button once to put it in Standby/Sleep mode, then all you would do is find out the command to put the phone in standby mode (sorry I dont know it), then open notepad on your desktop, then type the command something like, this is ONLY AN EXAMPLE (42#"\Program Files\xdaShutdown\xdaShutdown.exe"), then save the file as either Short_PTT.lnk or Long_PTT.lnk and then drop the file into your \Windows folder.
But what about one push on the PTT button to wake it up out of standby? (without setting it so that all buttons wake it...)
Wow, I am an idiot. Haha. I never thought about the "wake up" part. Cuz once in Standby, the PTT button would then be non responsive so it then wouldnt work for waking the device. That is a tuff one, I have no idea how to specify what button(s) are locked/unlocked when in standby.
No way, you're not an idiot! I (and others I'm sure) totally appreciate your input. I just happened to have thought this over many, many times. I very well may have to go buy a bottle of that "puffy" paint stuff... sure would beat a full disassembly of the device to make a new, pronounced button!
I'm hoping I haven't misread the problem here, but if it is what I think it is, then you can do it with just S2U2.
I have my TyTnII set up as follows:
No button lock
S2U2 set to lock when backlight turns off
Backlight to turn off in 1 minute
In Setting/Buttons, assign "Button 4 (hold)" to S2U2
So I use it in a similar manner to the original poster. I "wake" it with a press of any hardware button (and obviously unlock it with a slide on the screen)
I lock/stand-by it by pressing and holding the OK button (it goes into standby after 1 min of being locked)
Hope that makes sense and is what you are after.
(nb am not 100% sure that the ability to set an app to run on the holding of a button is standard - I might only have that functionality dues to having SPB PocketPlus installed - am sure someone will let me know!)
Yes! this is what I was going for... I didn't even think about using your solution. Thanks!!!!
Does anyone have a problem with the hardware buttons not waking the phone up? I have my key lock setting not to lock buttons, but most of the time, my phone does not wake up when I press any of the hard keys. However, when I use the jog dial, the phone will wake up, but none of the other buttons will work.
hi everyone!! i found that if i press some time the end call buttom, there are a few options that i could do, one of them is to lock the diamond... and i set long press the end call buttom to lock the device...
diamond locks when long press the end call buttom, but doesn't go sleep... is there anyway to put the power buttom to do the 2 things simultouneasly?? when you press the power buttom, it locks the device and put it to sleep! is anyway to do this??
I believe that when the device is in standby from pressing the power button all the other keys are locked with exception to the power button anyway? I know its not exactly what you're after but it seems a simpler solution than any others I can think of.
Some sort of script would do it, either MortScript of SKScheMa, to first lock the device (by launching Endkey.exe) and then power off.
Edit: There's also an auto keylock setting that I think locks the device anytime the power is off, maybe that's what you need?
|LoIrO| said:
hi everyone!! i found that if i press some time the end call buttom, there are a few options that i could do, one of them is to lock the diamond... and i set long press the end call buttom to lock the device...
diamond locks when long press the end call buttom, but doesn't go sleep... is there anyway to put the power buttom to do the 2 things simultouneasly?? when you press the power buttom, it locks the device and put it to sleep! is anyway to do this??
Click to expand...
Click to collapse
Hi this is how I have always locked my diamond by pressing power off it locks and turns off the screen also, this is performed by a registry edit, using a registry editor and going to Hkey-current-user\controlpanel\backlight\autodevicelockenable and changing from 0 to 1, this will also auto lock everytime the backlight turns off so you may have to change back light off time
that should work.. but there isn't a simply way to put the power off key to do the lock of the pda and to switch off the lights??
isn't a way to do this??
|LoIrO| said:
that should work.. but there isn't a simply way to put the power off key to do the lock of the pda and to switch off the lights??
isn't a way to do this??
Click to expand...
Click to collapse
you can try touchlockpro
|LoIrO| said:
that should work.. but there isn't a simply way to put the power off key to do the lock of the pda and to switch off the lights??
isn't a way to do this??
Click to expand...
Click to collapse
Check these two threads... it looks like Armstrom's lock does the job.
http://forum.xda-developers.com/showthread.php?t=445480
http://forum.xda-developers.com/showthread.php?t=261277
I'm trying to remap my End Call button so I can use it to "Go Home", and End Calls. I don't want that button to put my phone to sleep, just the side power button. I want to also free up my IE button for use with anything else I might want it bound too.
In my ventures to do so, I've noticed that both the End Call button and Power button are mapped to the same keymap. I had thought I had changed the Power button but when I tried to end a call, the red button just puts the phone to sleep, which is exactly what I wanted my side power button to do while I'm on a call.
Is this a bug, or a "feature" in the kernel?
im pretty sure its part of the kernel, it has been there since the donut days (the old keymap was crazy volume up was the menu button, volume down was back)
it is partly due to the fact that the vogue has very few buttons, the kaiser was a device that just worked with our kernels at first.
i think even changing the buttons in atools will not change the kernel key stacks like your asking for
although l1q1d being the creator of Atools would know a lot better than I would
I've been looking at the querty.kl file, trying to understand the keymaps, and what they're associated too... Anyway of running a program that captures key presses and prints out the associated keymap for that key press?
Hey! Post from the grave!
Did you have any luck ??
I was also hoping someone knew how to go about this.
I know there are ways to remap keys, but I'm stuck in a browser, and all I can do it put my kaiser to sleep.
I even tried atools keyboard remapper to no avail (awesome tool btw).
It's no fun when you can't exit applications d:
I don't mean to double post, was just hoping someone could answer this.
Krazy-Killa did you have any luck?
Can anybody recommend an app what puts a lock icon widget on the homescreen? My case don't allow to press power button, and button savior is too confusing for my mother.
similar Q
Howdy, pardners!
I on the other hand wonder, whether there is possibility to disable onscreen lock - my back button is hardly reachable so i am not worried that it will get pressed. Sliding the screen everytime i just what to know the time or what ever is however quite annoying. Any chance to disable only touch screen, no screensaver - just Laucher home screen with clock, calendar..., unlocking with back button or quick some combination of others?
Would be magical !
regards
In regards to the first post: have you looked in nook touch tools? There may be a way to set one of the side buttons as the power button, therefore locking it.
Good luck!
I dont know if anyone has it too but:
Go to button savior, check the box that says android recent task.(just bottom of the first page).
And everytime that i press the n button long, it goes to lockscreen. i dont know why. Also long pressing the home button on the button saviour does the same thing too.
The power button and the "n" button go to different electrical sections than the four hard side buttons
The two buttons go to dedicated input pins, the four buttons are part of a scanning matrix.
Although it might be possible to statically enable the whole matrix so that you could detect a button push without scanning (while asleep)
it seems that they would have not handled the buttons separately if that were the case.
In short, any button can be assigned to power and put the Nook to sleep.
Although I'm not sure if any button would be able to wake it?