Related
Hey folks!
Yesterday I found an amazing phone on the internet. The HTC Touch. So, as I am not that much into the Herald modding, I could not figure out, which tools or what software they use on that phone.
I got a link to a gallery where some pics about this phone are shown. They show also some pictures about the software they use:
http://www.xonio.com/bildergalerie/HTC-Touch-O2-XDA-Nova-T-Mobile-MDA-Touch-Vodafone-VPA-Touch-Galerie_27532015.html
So please, could someone tell me, what rom here on the board makes my phone look like the HTC Touch and behave like the HTC Touch? I do not expect my phone to be exactly like that, but perhabs its possible to have it a looking a bit like the Touch?
Sorry, if this sounds like a stupid question, but I read through the board and I do not want to break my phone, so I would like to no exactly what rom to use, because so I am able to do only one crack (HardSPL/uspl) ... ^^
Thanks for help!
z
Whats up... welcome to the forum..... Ummm The interface you are looking for is HTC home (today plugin) ... for the full touch experience you'll want the cube as well. You cant go wrong with open touch biggy 3.0.... its a great place to start
I suggest you go with Open Touch as well. You will get the features that you are looking for.
roman2113 said:
I suggest you go with Open Touch as well. You will get the features that you are looking for.
Click to expand...
Click to collapse
And many more ofcourse. I have Open Touch V3.0 Biggy and it's even better then the interface on the touch. You Get: HTC Home Screen, Cube ( finger sweeping thing ), Loads of good games and many more.
There are several programs here on the forum to make the phone to your wishes. For example if you want a real nice picture viewing program i suggest you use Slide 2 View by A_C.
Use the search function on the forums and type A_C or slide 2 view. Even the Touch doesnt have this function.
BTW, Welcome to the Forums !
hi people
i need to know how do i check the accelerometer,when buying a pre owned diamond...i need to know some default prog/settings which come preinstalled in it...
any other points that i need to know when buyin a preowned diamond,plz post here...
thanking all in anticipation
take care
Hi,
You can run the teeter game. It's taking full advatange of diamond's accelerometer.
My set is also a preowned set. Still in a very mint condition.
I suggest you to check the basic functionality, buzzer, buttons, touch screen, bluetooth, wifi, gps, camera. Don't forget to check the USB port and all accessories.
Hope this helps.
thanks man
i also wanna know if there is some accelerometer config utility like the 1 for screen callibration(in my k-jam)
i think downloading some thing like
HTC Sensor Calibrator [zip, 66 KB]: To test the sensitivity of the sensor
brightness, the accelleromètre and browser (round button)
http://htc-diamond.sosref.com/download/Sensors.zip
from this page
http://forum.xda-developers.com/showthread.php?t=417873
would help,but cant seem to get the link working
help me plz
ps.i dont understand french(language on the http://htc-diamond.sosref.com )
You can download it directly from HTC's site.
Here is the link
http://www.htc.com/www/supportdownloadlist.aspx?p_id=133&cat=all
thanks man
now i have to hope that the diamond has rom v.1.93
hey u got some exp with custom roms,was wonderin which rom d b the best for me(without restricting)the diamond experience
was lookin at dutty's 2.8rtm...
thanks alot dude
Hello Seniors,
I have a Tytn II with normal Rom version 3.29.707.0 WWE
Radio Version is 1.65.16.25
I am very new to this ROM cooking & flashing thing but it looks amazing & interesting to see how you make your devices look mesmerizing with all those features that you work upon. I read few instructions about how to install these cooked roms with RUU files..But due to lack of knowledge & experience, it doesn't seem to be working for me. I am looking forward to a Manila 3d or 2d rom's .cab file which comparatively is easier to install. Can someone please help me with a file or a link from where i can get a working Manila or any other Touch 3D rom's .cab file that i can use for my Kaiser..Your help will be highly appreciated.
I found one working .cab file for Manila 2d but it doesn't work in landscape mode.
here u go
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
looking for a quick fix will almost always get you nowhere. Try clicking on the link titled "For all the people that want a cool phone" in my Sig and read the post.
Thanks !!
Thank you all for your response as it really was helping. I appreciate your views about the journey. Not just getting the meal served on table rather also to know how it is being prepared in the kitchen & what's it all about ! Will definitely keep up my research & will try to make most of it. Please keep helping & suggesting as it really helps. I know it's not sumthing that you're here for. But again if u spare some time for queries that u feel r considerable it'd be great. And yes i've gone thru the link : http://forum.xda-developers.com/showthread.php?t=465507 and tried to make it work on my Kaiser..But Touch-Flo 3d was not initiated even after flashing on screen again & again..I got the Second start up & Diamond Album work though..But didn't see Manila 3D working even i tried installing files in my device memory as specified serial order :
TF3D-QVGA
Opera
HTC AudioManager by Swtos
TF3D Standby
Touch Response
HTC-Diamond-Album
Manilla 3D landscape
Please help if anything needs to be done apart from these !!
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
It Worked
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
vicky_crispy said:
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
Click to expand...
Click to collapse
Glad you got everything working, but obviously when you download a lot of crap that wasn't meant for your phone onto your phone,to make it look cool, it uses a lot of resources. While TF3D looks really cool and everyone here has done a great job porting it to our Kaisers, I still think that M2D gives you a lot more " bang for your buck " with fewer problems and fewer needed work a rounds.
RESULTS
Well i agree Denko that this feature is not meant for Kaisers by default. But by using certain means & making them work is what "Development" is all about. I understand there's a price for everything that we do. And after all d research & experiments that i did with my Kaiser..Its not the "Kewl" thing neither the 3D effect that is making me go crazy but its simpy the efforts & the result that i finally derived through them which again has inspired me that i can go ahead & experiment and maybe create new things too. And I can understand on thing for sure, that for a technology freak, There's no end to modifications & development as it's an on-going process.You've yourself been a part of same thing for a long time now i guess, But for me its sumthing i've stepped upon, So i'l take my time & maybe react too. Though you might find it too small to react & childish too, But datz d way it is. Thanks once again for your wise help & suggestions. Now next thing i'd wanna do to my Tilt is Flash a ROM in it..Maybe by next week. And that's sumthing i'm li'l scared of because i dnt wana cause harm to my device at d same time. And even after reading tutorial, M nt getting it worked as my phone gets disconnected from USB mode as soon as i start burning a ROM. Also i dnt really know how to get a HARD SPL 3.56 on my device. I tried that but it didn't work too. Is there some video tutorial that gives a sneek-peek into the action. Anyways i think m going too fast for that, And there's no hurry. So what are you working upon these days ?? And what do you do ?
Clarify & help please ???
kaiserII101 said:
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
Click to expand...
Click to collapse
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
<~THANK YOU~>
fiyaburnz said:
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
Click to expand...
Click to collapse
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
vicky_crispy said:
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
Click to expand...
Click to collapse
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
How to get -G- Rom ???
kaiserII101 said:
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
Click to expand...
Click to collapse
Sir,
thank you for your suggestion. But as I've mentioned in my previous Replies, I am a rookie when it comes to Kaiser or ROM cooking & flashing. So i tried to flash some ROMS in my Kaiser but it failed. I mean my device is connected to my PC thru USB..And then i go thru those normal RUU file initiation screen too. But as it turns into 3 color screen & status shows "0%", It gets stuck right there & gets Disconnected from the USB connection !! And what about HARD SPL...How can i get it done to my Device..Specially with the configuration that i have on Kaiser. Because like i mentioned, I try to flash things through RUU..My phone gets disconnected frm USB ?? And wanted to resolve the query that DO our phones come with a HARD-SPL already ?? What is it actually & Hw can we check if its there on our device already or not ?? I tried by pressing both the "SOFTKEYS" at the same time..all that happened is that my phone screen got locked (Normal screen-lock)..I also tried pressing CAMERA & POWER buttons together for almost 30 seconds..Nothing happened Well these threads help me to an extent as i keep reading. But if there's some specific directions that i can get specific to my query. It might help..Or maybe if there's a Video-tutorial. Plus if you are getting what actually my problem is..I mean with the device..like if there are some specific files that i should use for it to get working..Please attach the links if you would. Because i did check the video of Touchflo 3D manila on Youtube & it was quick out there !! Also i installed some Kaiser tweaks (KaiserTweak-nikagl-20080613-1711) as i read in a thread installing tweaks make Kaiser speed up a lil bit when using Manila 3D..But the Touch-Incall-Screen-Tweal seems to give some trouble as the incoming call screen gets stuck..It did twice today morning. So i have un-installed those tweaks !! So if there's sumthing that you think might get my device a li'l boosted up along with Manila 3D..Please refer that too !! I'l try to flash a ROM once i receive your response about how & which version of HARD SPL will b fine for my Kaiser..And how can i get it on my device ??
Your reply will be awaited & appreciated.. Thanks in Advance
Flashing Your First Kaiser Rom (For Noobs)
click the link stylez posted, don't be embarrassed, I was there about 6 months ago
vicky_crispy said:
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
Click to expand...
Click to collapse
no prob i used it and it worked fine for me i just switched back to 2d about 2 days ago and im already thinking about going back to 3d
installing M3D really makes my Kaiser slow. i installed M2D instead and installed M3D skin i dont have any problem w/ it right now
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Flashed GK.10.Final Rom
kaiserII101 said:
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Click to expand...
Click to collapse
Hey Senior..Than'x for all your support & guidance..I flashed Garmin's version 10 final rom on my Kaiser yesterday night..I had a li'l fear in my mind before i initiated HardSPL 3.29 & then Flashing GK.10.Final on my phone but all that happened very smooth & gave my device an all new look. Now what i am wondering is that how can i use Manila 3D or should i say 3D interface on my Kaiser. Or i must say you advice me what will look the best on my Kaiser. If you have any roms or suggestions upon what can i do post installing -G-'s rom on my kaiser..Or is it the complete package within itself..Please do advice me regarding this..I really would like to move on to the next level..Its really adventurous..Cheers to y'all !!
Regards,
Vicky
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
SUCCESS !!!
kaiserII101 said:
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
Click to expand...
Click to collapse
Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job
Hi all
This is my first post
I thought I would share this modded opera mini 5 cab for wm2003se
It works perfectly on my Alpine
Enjoy
View attachment mini5_wm2003se.cab
Excellent find - works well.
Had been using the midlet version, this seems quicker.
kevcal said:
Excellent find - works well.
Had been using the midlet version, this seems quicker.
Click to expand...
Click to collapse
Thanks
I found that as well
Very smooth and runs fullscreen as well, unlike the midlet version
Is there any way of reducing the font size even more than 'small' ?
I found typing
config:
into the address bar gives some 'power user' settings, but no more luck..
Have found configuration options quite lacking in both this and the java version - maybe I'm missing something.
As you say this runs much smoother and seems faster.. and loads really fast compared to the midlet version..
please make upgrades for wm2003se .... surely most of ppl would like it...
Outstanding!!!
OUTSTANDING!!!
Thank you very much!!!!
Thank you. It's work very well in my XDA IIi.
thx,try it
thank you so much! it works great!
Thanks this is EXACTLY what I needed! I couldn't find any good browser for my Windows Mobile 2003SE PDA, this is it!
great!Thanks very much.I hope that i can see more sofewares shared each other.
Nice to have an alternative browser to IE which crashes on a lot of modern sites.
However, I'm finding that it is very erratic about loading sites straight away -sometimes it takes a few goes or have to shut it down and start again.
Doesn't handle forum replies or webmail very well and no word completion.
But, at least it does load most sites pretty well.
Thanks
Opera Mini 5.1 available for wm2003se.
Or visit m.opera.com using Internet Explorer on your PDA (can't download it with Opera Min Beta).
It'll download alongside your current installation, so your bookmarks, etc won't be transferred over (there's probably a way). Just tried it this morning; not sure which I prefer yet...
Good that they support 2003 out-of-the-box still
The CAB won't open on my XDAIIi (Invalid Windows CE setup file). I'll try via PC later.
Strange... it definitely installed on mine... as you say, see how the PC install goes..
I don't see the XDA IIi listed under supported devices...XDA, XDA II, XDA IIs, XDA III but no IIi...
Amazingly, they actually have an installer for 2003se devices this time. I checked out the m.opera.com site from my WM2003se and there was a mobile 2003se alternate installer!
I installed it on my Dell Axim X50, Windows Mobile 2003se, it works perfectly. Quite a bit better than Opera Mini 5 beta.
Yeah, I installed it. Nice to have an alternative to IE but it still has quite a few false starts when trying to connect.
Imports bookmarks from mini using Opera Link which is good.
opera mini 5.1
Fab!
It has a default browser option!
and works FAR better with forms than 5
Black Friday Htc Hd7
This is really good one i like color contrast and forums views
h t t p : / / w w w .c e l l h u b . c o m / b l a c k - f r i d a y - d e a l s . h t m l
Black Friday Htc Hd7
See Here http://forum.xda-developers.com/showthread.php?t=416474
the story of how i came here is i was looking for a phone with direct3D support and the msm7225 processor as the native support on the touch 3g sucked.
i looked at the datasheet page here http://pdadb.net/index.php?m=cpu&id=...alcomm_msm7225
Clicked the browse all devices that use the MSM7225 looked through the list until i come across one that had windows mobile as the os, first one i come across was the omnaPro, checked if it supported direct3d knowing the gpu would be the same as its embedded in the msm7225 and google lead me here.
i thought what the hell , its not a omniaPro, but theres always hard resetting lol (done it once tonight lol)
tried the direct3d examples first, without driver , sucked , less than 1fps would be my guess, installed the drivers expecting a crash and nothing , it booted , run the examples an BANG PERFECT!!! AWESOME!! WELL HAPPY!!!
off to post in the touch 3g forum am a happy bunny, hope it will solve the 2d issues as looking at the cab its local hooked and not remote hooked so it must be the only gpu driver running.
AWESOME!
does it run on jade!! does this means that we can run tf3d on jade!!
oooh wow, thnx for the find !
Maybe some of the cooks will create a rom with this one and Touch Flow 3D
this was my first thought too lol . not gonna happen tho, because tf3d uses opengl ES, and thats totally diffrent to direct3d.
not imposible because there is a opengl ES compatibility layer for the omnia 2 i8000 (dont bother iv tried it already for fun and what i expected happend nothing at all lol).
tf3d would be nice tho, so if iv missed somthing and we can run tf3d on just pere direct3d someone let me know how please would be nice to have a mini hd mini lol
hehe yeah our own htc hd mini
so wait, what exactly is this useful for then ? gaming ?
I confirm that D3D driver from Omnia works perfectly.
Now we just need to get a working Opengl ES driver ("lib_GLES_cm.dll" I believe).
there is just one game that stil wont run after this driver instal ( xtrakt ). other games like cod can now run on full speed on max settings. and without the driver it was stil playabel at lowest settings but stil laggy a bit. sow there is a big diffrends whit this driver !
i confirm too that the 3d tests run very well , but didn't try any game. Exept some 3d games does it play a role for some other 2d games or apps , or even the menus slide ?
soms apps are faster whit this even scrolling feels difrend and smoother like my navigon ( gps navigator) is running faster and loading faster but on manila i dont see that much difrend
ritchietos said:
there is just one game that stil wont run after this driver instal ( xtrakt ). other games like cod can now run on full speed on max settings. and without the driver it was stil playabel at lowest settings but stil laggy a bit. sow there is a big diffrends whit this driver !
Click to expand...
Click to collapse
that game requires OpenglES thats why it doesnt run. il say it again , its DIRECT3d not opengles , hence tf3d will not run yet.
it does seem to help manilia , the bottom scroll is smoother. and yeah it prob will help games no end judging by the jumpp on the 3d tests.
again , no tf3d yet but well worth it
thatguy1982 said:
that game requires OpenglES thats why it doesnt run. il say it again , its DIRECT3d not opengles , hence tf3d will not run yet.
it does seem to help manilia , the bottom scroll is smoother. and yeah it prob will help games no end judging by the jumpp on the 3d tests.
again , no tf3d yet but well worth it
Click to expand...
Click to collapse
iam using a opengl software driver from vincent works well for touchflo 3d
if u use throttle launcher runs on opengl if u set it so. i now its still emulate on the cpu but its faster than the normal settings
ritchietos said:
iam using a opengl software driver from vincent works well for touchflo 3d
if u use throttle launcher runs on opengl if u set it so. i now its still emulate on the cpu but its faster than the normal settings
Click to expand...
Click to collapse
Can you please give us some more explanation and eventually some link for the files?
Thanks
P.S. This thread and Android thread I am following and reading with interest.
dreamdreamt said:
Can you please give us some more explanation and eventually some link for the files?
Thanks
P.S. This thread and Android thread I am following and reading with interest.
Click to expand...
Click to collapse
here is the page for the opengl.
http://www.vincent3d.com/
and here is the tool its like manila whit skins. and there is a android skin phone 7 skin an touchflo 3 the hero skin the sense skin.... (soms skins need difrend thorttle bulds so read it good )
http://www.throttlelauncher.com/portal/
u need the opengl from vincent to make the animation work.
and net framework 3.5.
hope this helps .
ritchietos said:
here is the page for the opengl.
http://www.vincent3d.com/
and here is the tool its like manila whit skins. and there is a android skin phone 7 skin an touchflo 3 the hero skin the sense skin.... (soms skins need difrend thorttle bulds so read it good )
http://www.throttlelauncher.com/portal/
u need the opengl from vincent to make the animation work.
and net framework 3.5.
hope this helps .
Click to expand...
Click to collapse
Thanks a lot
Hi ritchietos,
I downloaded Vincent ES 1.x but don't know how to install it??
ok so u se a folder whit the name ogles-bin-1.0.0 .then open bin .than open arm and then u se 2 maps debug and release open the release map and copy al te files in the windows directory on u phone. dont forget to turn on opengl on the throttleconfig.
and u ready to go
awesome now we have software emulated ogles too !!
i cant get it working with tf3d. i used the tf3d_qvga.cab from htcclassaction.com and the same thing happened.
what cab are you using that works ?
if i can get it working il make a cab for the jade when i get some spare time
thatguy1982 said:
awesome now we have software emulated ogles too !!
i cant get it working with tf3d. i used the tf3d_qvga.cab from htcclassaction.com and the same thing happened.
what cab are you using that works ?
if i can get it working il make a cab for the jade when i get some spare time
Click to expand...
Click to collapse
the real touchflo3d works but there are som white textures because its for a ati chipsets. there are som ports for this to get it work but didnt have the thime jet to search for it . the throttlelauncher touchflo 3d or android skin works whit opengl
throttlelauncher seems about the same speed with and without acceleration, but that cud b because im tired lol.
i never knew the textures were not displayed because of the lack of the ati chip are you sure about this as the vincent dll emulates it all in software id think it was because this dll lacks certain fetures.
anyone ever hear of the old glide wrappers that converted 3dfx calls to directx ? sounds similar to early glide wrappers to me lol
EDIT: Its slower with 3d acceleration enabled because of the wrapper i think, am just going to verify everythings installed right
EDIT2: yes its all installed right the d3d samples still fly too, shame throttlelauncher does not support direct3d acceleration. with the hero theme it averages 4fps just sitting there on the homescreen with acceleration on, and about 19-20fps without acceleration.
thatguy1982 said:
throttlelauncher seems about the same speed with and without acceleration, but that cud b because im tired lol.
i never knew the textures were not displayed because of the lack of the ati chip are you sure about this as the vincent dll emulates it all in software id think it was because this dll lacks certain fetures.
anyone ever hear of the old glide wrappers that converted 3dfx calls to directx ? sounds similar to early glide wrappers to me lol
EDIT: Its slower with 3d acceleration enabled because of the wrapper i think, am just going to verify everythings installed right
EDIT2: yes its all installed right the d3d samples still fly too, shame throttlelauncher does not support direct3d acceleration. with the hero theme it averages 4fps just sitting there on the homescreen with acceleration on, and about 19-20fps without acceleration.
Click to expand...
Click to collapse
White squares: Images appearing as white squares is due to non support of ATC textures - this can be caused by a non ATI graphics driver - either an nvidia one (intel used ati i beleive) or software based ones. This is an IP issue more than anything else, and not something that we as developers can easily fix. (from xda)
they are som devices whit this fix so iam looking for it to ghet it working.