Hi all,
Not sure why, but when I connect my diamond to the comp and try and connect w/ active sync, get a message on my phone saying I must install active sync 4.5 or newer on my desktop computer. However, I just did before connecting
If I cant get active sync to work, could somebody please explain how I can install net compact framework via direct file transfer? I intepreted the instructions on the microsoft website as to install the msi file while the phone was connected but nothing's happened and no cab files have appeared on my phone so obviously not doing it correctly.
Thanks in advance!
repalce the Cabl
Related
Gents, I need some help please,
After installing WM5 on the PDA2K, the Activesync stopped syncing.
- Tried most of WM5 different versions
- Tried with both Activesync 4.1 & 4.2
- Replaced MAPI32.DLL with an older version.
- Uninstalled Outlook, rebooted laptop, then reinstalled Outlook
Every time I get this message:
Could not sync with the PPC, please disconnect the PPC from the USB then connect it again and try, if it does not work then refer the Activesync help.
Thanks...
Hello,I had a similar prob..I also use PDA2K,If you use anit-spyware tools and anti-virus software they stop the active sync for establishing contact with the device.The simplest way I think, is to uninstall the virus software entirely and install the active sync.After you can reinstall the anti-virus.But you should make sure you have the version 4.2 of the active sync.
I am myslef a newbie but it worked for me.
Otherwise you should go inside your fireware and allow active sync which can be complicated if you are a newbie like me....I hope this piece of info helps
Help required please. I want to HSPL my phone but i need an internet connection to do that. The problem is whenever i install activesync and connect my phone, the wireless internet on my laptop just don't work even after disconnecting my phone and i have to restore my windows to a time before i installed activesync in order to make my wireless connection work again. Please help me to solve this problem any setting in activesync i need to change to make it work? I will really appreciate your help.
Delete and recreate your sync relationship.
Make sure you select enable wireless connections while sync'd.
Regarding HSPL, have you tried thre manual install first? Otherwise it'll cost you.
Also, with the auto install or installing via RUU.exe active sync will disconnect and only USB connection will remain so it should be able to connect to the network during install.
I have resync many times but my internet doesnt work. It doesnt even work after removing the phone from active sync. The only way to make my connection work again is to restore my computer to a date before installing the activesync. Anyways i will try to connect it through my office computer if it didn't worked again.
And i am installing HSPL for the very first time so pls guide me on this, what's a manual install. I went through this thread
http://forum.xda-developers.com/showthread.php?t=520312
and going to install through this file " Topaz-HardSPL_V5_00R5_183HSPL.zip ". Am i doing it correct? And i dont have to install HSPL 1.33 before installing 1.83, i can start directly from 1.83 right??? And after that i will install the energy ROM through storage card method. Please confirm that i am doing it correctly. Any help regarding this will be highly appreciated.
Not sure about your ActiiveSync issue. So you instsall AS and you no longer can access internet from PC? What OS are you running? If its Vista, you use Windows Mobile Device Center, which replaced AS.
Regarding HSPL, I will be brief in my explanation and point you back to the thread and search for my posts as I have posted instructions there many times, they just get buried in the many pages.
There are 3 methods to flash;
1. Auto Install, where you download the Topaz-HardSPL_V5_00R5_183HSPL.zip and the enablenewrapi. cab, copy and install .cab to your device, sync to PC, then run .exe.
This method will ask you to donate and will not work unless you do.
2. Flash from SD card, you can rename any .nbh file to TOPAIMG.nbh, place in the root of your SD card, enter bootloader mode (search for instructions) and it will initiate the flash.
3. Custom RUU, find and download Topaz RUU.exe, place .nbh file in same folder as RUU.exe, sync your device to you PC and run the RUU.exe.
I use #3 exclusively and have never had an issue, others get stuck at 0% progress an have to soft reset.
I believe you need to flash 1.83, then flash to 2.51 but I am not 100% sure you can't flash directly to 2.51. Do not bother flashing 1.33.
I have provided tools for #2 and #3, #1 exe and cab are available in the HSPL thread.
If you thoroughly read all of my instructions and it does not work, your only option will be to pay through the auto install method and if you encounter issues open a ticket as instructed in the thread.
Thanks a lot. I will try the #3 method. And will post how it went. Thanks again.
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5 before.
help
adnanbaig18 said:
I tried both the SD card and manual method and placed the "customRUU.exe" and the "1.83 nbh file" in the same folder in my PC and while activesynced i lauched the cutomRUU.exe but after going into that tri color screen and then into usb mode it just stucks at 0% and nothing happens. I waited for like 5 mins but it just got stuck at 0%. What should i do now?
BTW i have flashed my TD2 with the original ROM update of WinMo 6.5
At me too most
I do not know what to do help please
Click to expand...
Click to collapse
All,
for those who have Windows 7 and run with Office 2010 64bits it's not possible to sync your phone. The solution is to deinstall office 2010 and install office 2010 32 bits. You don't have to save your settings and files, after installing your system find everything incl. account setting
I still had sync problems; the second time i pluged in, my pc did not find my phone. Looking on internet i found the next solution and after trying i must say it works;
Same issues!
Here is what I have done:
Step 1: Connect my Samsung Omnia (SCH- i910) Touch Diamond II to the USB Port of PC. Windows automatically installed driver in device manager called "Microsoft Windows Mobile Remote Adapter." Windows Mobile Device Center automatically loaded.
Step 2: With WMDC running, I can browse all files on device, my storage, and storage card. I have options to add/delete programs. I can sync with Windows Media Player. I can also download all pictures and video files to the PC with a single click!
All this is great but the MOST important thing to me is to sync my Contacts with Microsoft Outlook. When I press "sync", if it hasn't tried to start automatically, the green icon in tray spins, everything looks like it's going to work but nothing. It just hangs there till I finally cancel and exit. Looking through other tips, I read something about windows firewall. I have enabled the recommended entries as well as disabling firewall completely with no results.
Further testing, I can sync mobile favorites if I uncheck all others but still can not sync Contacts. Need a fix!
All,
be also aware of remove hardware, then remove generic serial rejecten.
Regards, John
Windows 7 and Office 2010 can sync with Touch Diamond. First you must setup mail account in Outlook, and it must be default mail client, and then everything can be synchronized. Windows Mobile Device Center is prerequisite 32bit or 64bit version, depending of Windows 7 version
cheers rikee
-First download the HTC Sync 2.00(only 2.00 works!)http://www.htc.com/www/supportviewnews.aspx?dl_id=933&news_id=729
-Then download the DroidExplorer from here http://de.codeplex.com/releases/50997/download/144864
When you run haret open the droidexplorer and push the connect button (or it will auto connect).it will open you the whole partition!to put files go to sdcard and drag the files!also you can access the whole partition to change the boot animation,the drivers,theframework-res.apk and more!!!
Hi
On the HTC site is HTC SYNC 2.0.40 is this version fine?
Will HTC sync work for syncing outlook to my x1 running Cyanogenmod 6.1 v1.5?
Yes use the download link....No htc sync can't detect the x1 as htc device so u will not able to do this...
Hi have anyone tried and had success syncing Andriod and outlook via MyphoneExplorer? http://www.fjsoft.at/
Thanks
http://labs.dashwire.com/drop/android
Awesome drop
Good research! Thanks!
jpgrobler said:
Hi have anyone tried and had success syncing Andriod and outlook via MyphoneExplorer? http://www.fjsoft.at/
Thanks
Click to expand...
Click to collapse
i am using it with Lotus Notes and froyo on my x1
Any tips on getting the usb or wifi connection going? I cant seem to get the phone and pc to connect
Downloaded the beta versions of MyphoneExplorer, I can see my phone, read and send sms's but syncing data does not work?
Any way to fool htc sync into thinking this is a legit device?
thanks
Hello Dear XDA Members,
I need some help with syncronizing my Phone Contacts To Gmail.
Im not a Newb User At Galaxy And Tried Many Methods.
First I Edited All of my contacts via Kies And Saved It On The Phone And On PC As *.scv File.
*When Im Importing The File to Gmail Most Contacts Are Shown On the phone without the phone number.
*Ive Tried To Create A New File Via Excel Using The Following Headliners:
First Name Last Name Phone Number 1 Mobile Number And nothing ive tried didnt work.
Contacts Are Agian Shown Without Numbers Or Numbers Show In "Notes" And Its Not Possible To Call.
*Ive Tried Also To Mark Only The "Phone Cotacts" And Export It To SD Card, But Its Making Me a File with 1453Contacts (I have only 180 On My Original List, Only 10% Of them has 2Numbers Or More.) (i have on my phone display total of 180contacts and my sim has 330contacts but its not marked.)
And Than When I Reload The File From SD Card To Gmail Trough The Phone, It Gives Me Many DOUBLES, Missing Numbers Etc...
Ive Been Tring To Do That All Day Long And Just Cant Find The Solution.
Can Anyone Help Me?! Please :]
Thank You Very Much Guys
Try this http://www.fjsoft.at/en/ (It's free) and use kies only for rom updating (only thing it can do properly )
Enjoy.
Even I am in need of managing my contacts & wondering what work flow should I adopt so all gets sync with phone & gmail., I tried MyPhoneExplorer its a good software I tried connecting my samsung galaxy I9003 but it doesn't work as yet with this new model, though it supports I9000.
Kies I find useless except the samsung official stuff updating,
sgsI9003 said:
...I tried connecting my samsung galaxy I9003 but it doesn't work as yet with this new model, though it supports I9000.
Click to expand...
Click to collapse
MyphoneExplorer should work with your I9003 too, try the uninstall/reinstall process.
ttf said:
MyphoneExplorer should work with your I9003 too, try the uninstall/reinstall process.
Click to expand...
Click to collapse
uninstall/reinstall the phone/modem driver or MyphoneExplorer?
I wish it connects with I9003, but it says "connection to phone could not be established, no device attached to usb".
I am connecting the phone to LCD monitor usb hub not to the rear usb ports, could that be an issue?
sgsI9003 said:
uninstall/reinstall the phone/modem driver or MyphoneExplorer?
I wish it connects with I9003, but it says "connection to phone could not be established, no device attached to usb".
I am connecting the phone to LCD monitor usb hub not to the rear usb ports, could that be an issue?
Click to expand...
Click to collapse
MyphoneExplorer of course ^^ (on your PC), check if the client part is installed on your SGS too.
About the Hub, yes it can be a problem.
check if the client part is installed on your SGS too
Click to expand...
Click to collapse
didn't understand this part, what does CLIENT mean?
sgsI9003 said:
didn't understand this part, what does CLIENT mean?
Click to expand...
Click to collapse
The software work as a client side (app on your sgs) / server side (app on your PC), in order to comunicate and synchronize, so when you install PhoneExplorer on your PC it install an APP on your SGS. Just uninstall/reinstall it on your PC and it'll push it automaticaly on your phone.
Oh I didn't connect the phone while I installed the MyPhoneExplorer that could be the reason.
Let me try this.
sgsI9003 said:
Oh I didn't connect the phone while I installed the MyPhoneExplorer that could be the reason.
Let me try this.
Click to expand...
Click to collapse
Make sure the debug mode is checked too (Settings -> applications -> devlopment -> USB Debuging)
Ok Thanks that finally solved the problem.
(it created few more problems while installing & showed a failed driver) but it took some time over 5-7 mins to initialize the modem & then showed it connected.
My phone explorer is great in terms of feature you can dial via computer receive calls via computer, send & receve sms via computer, edit/add contacts much better to do on computer than on small keyboard.
sgsI9003 said:
Ok Thanks that finally solved the problem.
(it created few more problems while installing & showed a failed driver) but it took some time over 5-7 mins to initialize the modem & then showed it connected.
My phone explorer is great in terms of feature you can dial via computer receive calls via computer, send & receve sms via computer, edit/add contacts much better to do on computer than on small keyboard.
Click to expand...
Click to collapse
Make sure kies is not running in background process and try it with the stock USB cable directly connected on the PC (maybe a hub issue).
Ok all problem solved now,
do I need to switch off debugg usb settings again when I need kies, its not connecting with kies now or is that background service of kies (which I killed) is mandatory to connect with kies?
sgsI9003 said:
Ok all problem solved now,
do I need to switch off debugg usb settings again when I need kies, its not connecting with kies now or is that background service of kies (which I killed) is mandatory to connect with kies?
Click to expand...
Click to collapse
Yes disable the "debug mode" when you need kies again.
contacts phone/gmail
Hi,
I'm new with smartphone. I gave a samsung I9000.
read all the above. thx for tip "my phone expl"
but I can't create a new contact on my phone directly on my Gmail ?
Now I tried pyphoneexplorer, and I don't find how do copy/replace a (newly created) contact to my gmail.
Can I get Help please ?
thanx,
B
Hello everyone!
So I just flashed my phone and put in the ViperONE ROM and my HTC sync manager won't work. Like my mac detects it and turns on the program but the program would freeze and I would not be able to do anything or click it. Secondly on the Sync Manager it shows my phone as "MTP device"?? What is that exactly?? Is that bad?? And lastly I tried to just transfer stuff via Android File Transfer, but that doesn't work either because the program says it can't detect my phone...
Please help.. Right now I can't transfer anything onto my phone