Hello!
Before I try to write something, does anyone know of a utility that will email me with the IP Address of my phone any time the IP address changes? There's similar utilities for Windows, just not Windows Mobile (at least that I've found).
Many thanks!
Jamie
Related
I am trying to run one of the many FTP servers available for Windows Mobile (vxFTPSrv or ShareIT FTP) to keep some files in sync but I can't seem to figure out what public IP address my phone has. vxFTPSrv says it is listening to a non-routable 10.**** while whatismy ip says it starts with a 200.**** while DynDNS for Windows Mobile says it is 32.****. Nevertheless, none of these work nor can I get these programs to listen to the ports. Any ideas? Does the Tilt even get a public IP address from AT&T? Thanks.
Try this
I'm no pro, but had to tell the Physical address to the the tech guy at my university so he could enable my phone o use the wireless network...
... anyways, download and install a Registry Editor (I use Task Manager v2.8) you should be able to access an Ipconfig tab, where all the information is available.
I don't know if I'm in the right track.... Hope this helps? =)
jim
your pda have an ip address
using wifi router the uplink sees the routers ip
using an isp the internet sees the isp's assigned ip
http://www.ip-adress.com/
http://en.wikipedia.org/wiki/IP_address
Here is a kewl utility that is FREE.
http://www.cam.com/vxutil_pers.html
Here is the stuff it does.
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
Another good one I use is Iper Suite.
http://tonaya.com/products/iper/index.php
For casual use the first one is probably satisfactory.
IPer is worth buying for the increased functionality and has a TFTP client.
HTH
TSoma said:
I am trying to run one of the many FTP servers available for Windows Mobile (vxFTPSrv or ShareIT FTP) to keep some files in sync but I can't seem to figure out what public IP address my phone has. vxFTPSrv says it is listening to a non-routable 10.**** while whatismy ip says it starts with a 200.**** while DynDNS for Windows Mobile says it is 32.****. Nevertheless, none of these work nor can I get these programs to listen to the ports. Any ideas? Does the Tilt even get a public IP address from AT&T? Thanks.
Click to expand...
Click to collapse
200.* would be a public IP. As would 32.*
Turn off your proxy setting in the phone and do the www.whatismyip.com thing. That will get you a more meaningfull result than anything else.
When I'm on GPRS/Edge (AT&T proxy settings in force) network I get a 66.102.186.15 IP address as reported by whatismyip.com. That resolves to alpmagr1fe06-dmz.mycingular.net. Which should be a att proxy server even tho it implies by its name its on a DMZ.
When I turn off the proxy for GPRS/Edge I get 166.195.188.15 according to whatismyip.com. That IP address will not respond to ICMP commands. So I assume it is firewalled. So it seems to me that yes you CAN and DO get a public IP address, its just that address is heavily firewalled.
You've piqued my interest, tho I cannot do anymore testing at this moment.
Does anyone know the name of any software (free if poss) that can change my mac address of the wifi card in the kaiser.
Please don't post back saying it cant be done because its hard coded to the device, i know... but you can software spoof it, i do it on my desktop and my laptop
well your desktop isn't a phone dude and it doesn't run the same software, so maybe no is the answer.
Mac adress is branded in the Hardware. So you can't change the Mac Adress. There is an option for Windows (Desktops) that has an software change for Mac Adress. But you well never be able to change the Mac Address on the hardware itself
Greetings All!
I recently flashed my TyTn II with jjblaster3's 28008 ROM and am having some difficulty setting up internet access via WiFi.
I've set up the static IP address and DNS servers but every time I attempt to access a website I receive a DNS error. I've tried entering various websites IP addresses but for some reason Internet Explorer defaults to http://xxx.xxx.xx.xx whenever xxx.xxx.xx.xx is entered, so I assume it treats the IP addresses as website addresses. I do recall having similar difficulties under WM6.1.
Another thing I have noticed of various WM6.5 ROMS is that the IP address dialogue appears broken in that
The IP and Gateway address inputs are limited to 2 digit octets (i.e. 192.168.0.1 appears as 19.16.0.1)
The subnet mask defaults to 255.0.0.0 as opposed to 255.255.255.0 (note that the subnet mask also appears to be limited to 2 digit octets, so by 255.0.0.0 I actually mean 25.0.0.0)
I've been through the various IP/DNS/Network settings dialogues with a fine tooth comb but I can't seem to find the problem. I've even disabled the phone in an effort to eliminate the possibility that my connections DNS requests are be directed via GPRS.
Anyhow, that's all the information I can think off. Any assistance provided would be greatly appreciated.
Kind Regards,
Nubey.
Does anyone know of a VPN client that supports RSA token #'s? I've looked all over the place but can't seem to find anything.
Thanks for any help.
Maybe this? (VPN Connections)
http://android.modaco.com/content/h...7/cisco-vpn-client-on-htc-desire-short-howto/
Jack_R1 said:
Maybe this? (VPN Connections)
http://android.modaco.com/content/h...7/cisco-vpn-client-on-htc-desire-short-howto/
Click to expand...
Click to collapse
I'm running Cyanogen 5.0.7, and I read all the post but did not see anywhere that is supports RSA tokens. I might still try it and see if it works. Thanks!
It says "Cisco VPN Client". I know that Cisco VPN supports RSA tokens, having used one for a long time.
Jack_R1 said:
It says "Cisco VPN Client". I know that Cisco VPN supports RSA tokens, having used one for a long time.
Click to expand...
Click to collapse
Do you think it will still work on a N1, I see that the instructions are for the Desire?
http://forum.xda-developers.com/showthread.php?t=630703
Thanks to Jack_R1 I believe I have everything loaded correctly. Now could someone tell me where I can find my IPSec info on my computer? I'm not to familiar with the VPN stuff, but I have been working at this forever. I'm trying to do this on the low from my company since they said that they won't do it for me.
Any help would be great, thanks.
If you're using any proprietary sw to connect, look there in the connection properties to find the server IP. If not - look in Windows connection properties for VPN 'dialing' connection.
Jack_R1 said:
If you're using any proprietary sw to connect, look there in the connection properties to find the server IP. If not - look in Windows connection properties for VPN 'dialing' connection.
Click to expand...
Click to collapse
Our computers use Nortel Contivity, but I can't find the connection properties anywhere. I see the destination ip, and the assigned ip.
The IPSec gateway address should be what?
IPSec ID?
IPSec Secret?
bump for help!
Couldn't find anything and not familiar with Nortel SW..
http://ubuntuforums.org/showthread.php?t=441042
"You will now be asked first for your Ubuntu password, and then the following VPN info: the IPSec gateway address (the hostname of the VPN router you want to connect to), the IPSec ID (aka group ID), IPSec secret (aka group password), username (your VPN username), and password (your password or the value of your SecurID or other token if you have one)."
I guess you need to ask your IT personnel for IPSect ID and secret. IPSec gateway you can find from settings:
http://www.it.ubc.ca/security/VPN/setupdocs/nortelcontivity.html
"Destination" field holds it.
Jack_R1 said:
Couldn't find anything and not familiar with Nortel SW..
http://ubuntuforums.org/showthread.php?t=441042
"You will now be asked first for your Ubuntu password, and then the following VPN info: the IPSec gateway address (the hostname of the VPN router you want to connect to), the IPSec ID (aka group ID), IPSec secret (aka group password), username (your VPN username), and password (your password or the value of your SecurID or other token if you have one)."
I guess you need to ask your IT personnel for IPSect ID and secret. IPSec gateway you can find from settings:
http://www.it.ubc.ca/security/VPN/setupdocs/nortelcontivity.html
"Destination" field holds it.
Click to expand...
Click to collapse
I believe that I have all my settings correct but I'm still getting "failed to connect". I'm going to do a little more searching but if I can't get it I'm giving up, I have spent hours on this. Thanks for all your help Jack_R1.
I've just started trying to make this work also. Lex, did you ever find a solution?
jmglidden said:
I've just started trying to make this work also. Lex, did you ever find a solution?
Click to expand...
Click to collapse
Nope, I tried everything. Jack r1 was very helpful, but I just couldn't get it. I think my company's security is just too high to bypass and my lack of knowledge didn't help.
I have the chromecast and if I turn off mac filtering my chromecast works. My question is how do I find out my chromecast mac address so I can add it to my filter list. I can't find it anywhere. Thanks in advance
formulabird said:
I have the chromecast and if I turn off mac filtering my chromecast works. My question is how do I find out my chromecast mac address so I can add it to my filter list. I can't find it anywhere. Thanks in advance
Click to expand...
Click to collapse
1) Get the chromecast IP address (Use the chromecast app on the phone, select your device, scroll down to get the IP)
2) Open command prompt, type "arp -a"
3) Look for the chromecast IP and there is your MAC address to the right
You might have to ping it first before running the arp -a command.
supernova_00 said:
1) Get the chromecast IP address (Use the chromecast app on the phone, select your device, scroll down to get the IP)
2) Open command prompt, type "arp -a"
3) Look for the chromecast IP and there is your MAC address to the right
You might have to ping it first before running the arp -a command.
Click to expand...
Click to collapse
Command prompt from a windows laptop or can I run that command from terminal on my phone. And thanks for your reply I will try it when I get home
formulabird said:
Command prompt from a windows laptop or can I run that command from terminal on my phone. And thanks for your reply I will try it when I get home
Click to expand...
Click to collapse
I believe that is only a windows command
Any time I have trouble finding MAC addresses when using MAC filtering, I just check the log on the router for a MAC address repeatedly looking for a connection. And anyone saying that you can let someone dangerous in that way, most likely not AND you'd get the same thing most likely by running the windows command. If they can MAC spoof, I think they can IP spoof too.
In addition, the MAC address is on the Chromecast box and on the unit but I've seen reports that the number on the box is more accurate than the number on the unit for whatever reason.
Enjoy.
I have configured Mac Address filtering on my WiFi router. I have added the MAC address of Chromecast on my router. The chromecast gets connected with the router and my Mobile. Now the problem is whenever I try to cast from my mobile, I don't get any display on the TV. At the same time, other mobiles from the house hold get disconnected from WiFi network.
Require help.