Hi Guys
Done a search but couldnt find any info on this issue.
I am trying to hard spl my X1 however everytime I have tried this I keep getting a error telling me that I need to check my USB connection.
I have tried doing this on my laptop and my netbook and I get the same error.. both are running Win7. However I am connected to Mobile Device Center without and problems and can access the phone from the laptop and netbook so I know there isnt a connection problem.
Any help would be great.
Thanks
Matthew
Related
Hi!
I'm having trouble using my tytn II as a modem in windows vista. I had no problems in windows xp but since i installed windows vista and use internet sharing application this is what happens:
I get connected and a new networkadapter (NDIS) is detected
I recieve a local ip-adress of 169.xxx...
This is making me crazy and i've searched the forum without beeing able to find anyone with the same problem...what am i doing wrong??
Any help will be greatly appreciated!
Thank you!
I understand, you use it with USB cable, may be using it with Bluetooth will be better, because in this case Windows will recognize it as a modem.
Please provide some more information about how did you make the configuration.
Did you make it as it was described in the user guide?
Hi!
I did make the configuration exactly as the manual describes it and my device is syncing correctly and everything. It even installs as a network driver when i use the internet sharing application. But it just wont give me an ip-address...
I've had this issue for over a month now and it feels like vista is blocking the service or something, but i just cant figure it out...
PLEASE advise!
I have the same Problem as you !
As a matter of fact, I have an ip but vista says that I'm connected to local network but not to the Internet.
But at the same time I have an illimited data plan that runs perfectly when using Pocket ie...
Still searching for a solution...
But i'm sure it comes from vista...
megaman
No problems!
Hi guys.
Ive used this feature with vista with no problems at all..
Just turned internet sharing on and it connected to the network connection then vista aked me what kind of network it was (Home, Work Place etc) and hey presto it worked.
Mine is a T-Mobile Vario iii btw.
Never really had a problem either though it's much too slow compared to a "real" USB-3G/HDSPA-modem. (I max out at 1.2-1.8 mbit/s but when I use my dedicated modem I easilly reach 4 mbit/s)
megaman said:
I have the same Problem as you !
As a matter of fact, I have an ip but vista says that I'm connected to local network but not to the Internet.
But at the same time I have an illimited data plan that runs perfectly when using Pocket ie...
Still searching for a solution...
But i'm sure it comes from vista...
megaman
Click to expand...
Click to collapse
Yeah this is killing me! I get the same as you, i get a IP-address but its a local one 169.xxx.xxx.xxx and vista says its a local ip-address...
I've started looking for services that may be stopped and such in Vista, but i still cant get it to work
I also can't get it to work, so if my WiFi goes out and i need internet, i just reboot to XP... Obviously not a solution, it's very annoying. I'd love to figure this out. I think my friend said he got it working, i should get details from him!
-Taylor
Guys, this is not the solution, BUT, until someone finds it, this is a awesome way to get around the problem! Just install the application, start it and tap connect. Now on your computer you'll find a new adhoc network using wifi, connect to it and your ready to go!
http://www.jongma.org/WMWifiRouter/
My fone isnt connecting via USB to activesync :S my HD fd up n had to reinstall windows n now when i plug my phone in activesync gives an error that it cannot connect. When i run the troubleshooter it gives the following output:
Unable to establish a connection between the PC and the device. Get up-to-date solutions to common connection problems. Please click the following link:
http://go.microsoft.com/fwlink/?LinkId=65257
that link is of no use. The tray has a network connection icon which shows it isnt able to get an ip address. ive been searching on google for hours and read countless forums. but no solution found . The device was connecting and syncing perfectly fine before i formatted and reinstalled windows. Anyone having any idea? :S
ok solved just worked by chance... i went to device manager, uninstalled the device, n restarted... n now its working \o/ i think the above post cant be deleted so i wrote the solution here so it might benifit others.
i am having trouble with activesync my computer can see my mobile device which is a BlackJackl II but activesync can't see it and i did the ports and firewall, uninstalled reinstall activesync whats the deal
just changed laptops, and find i need to constantly soft restart the tilt cause acer laptop with vista does not recognize the phone, once i do the SR its ok, but find the need to constantly do this every time i want to tether
anyone else having these probs and if so what have u done to solve the issue..?
thx to all,
Please could anyone help me! The windows mobile device centre suddenly stopped to recognize my Compact IV! It just says Not connected... I tried several things such as Connect with Active sync or Disc Drive (on the phone), unticked 'enable advanced network funcitionality, disabled Norton security, reinstalled the mobile device centre... always rebooting the Vista. It still wont connect!!! Anyone with more ideas to try?
I can access the internal storage from Vista, but I as its not connected with the mobile device centre, it doenst allow me to sync and install any exe files!
Appreciate any help (and I have searched forums, yes) Thanks
did you try to softreset and or hardreset your diamond ?
which version is your? my wmdc is 6.1 and working, the older didn't...
The same thing happens to me. I have to reboot my computer and soft reset my phone and then try again, and it works. I'm using version 6.1.6965 of WMDC.
tried many times
Thanks guys, but doesnt seem to help. Tried rebooting PC and the phone, still no luck. Even tried different USB ports!
Any idea could still try? Its so frustrating!!
I have the same problem but I sync to Vista using bluetooth instead of using the lead as it works every time. I gave up trying to sync using the lead.
help needed still
Bluetooth is so slow... Really want the USB cable connection to work. Apprecieate anyone could help! Please?! Tried with different cable but didnt help. Frustrating!
Hello,
I'm having this problem I can't seem to get solved.
I connected my Touch Diamond through the USB cable and cant see it connected in the Windows Mobile Device Center, but everytime I click "configure device" it says "There is a problem with your connection, please reconnect and retry."
I cant get this solved, I tried a lot of stuff I found here on the forum and others, but it still won't work.
Anyone any idea?
My OS: Vista Ultimate 64-bit, Im running the latest WMDC as well.
Thank you!!!!
Sync issue...
Some of these questions may seem obvious, so I apologise if you've already tried these, but have you done a soft-reset on your device and rebooted your PC? Do you have any other devices set up in Device Centre that may be causing a conflict? Are you using the correct version of WMDC for your OS? The last resort is to try a hard-reset on your device... not pleasant, but can correct a multitude of issues
I will try all, I hope I dont have to do a hard reset, I just configured it -.-
I've had issues like this.
Check if Advanced Networking is switched on in the USB settings on the device. Turn it off if it's on. That should let you set up the sync. You can turn it back on later.
Thanks Shark, but I already gave that a try :s