Related
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
mcowly said:
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
Click to expand...
Click to collapse
You can restore original SPL and rom without having to get into phone with cabs.
As long as you can enter bootloader screen you can restore stock SPL.
I came across this "step for step" process via a search. I have not tried it yet (and hopefully never have to -
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package (ie the original SPL).
2. also download the original hardspl from the attachments in this post. (I presume you already have this?)
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing. (You can probably skip this step)
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000.
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
As I said, I have not tried this. If this does not work, search on this site or Google for additional info. Hope it helps.
mcowly said:
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
Click to expand...
Click to collapse
follow to:http://forum.xda-developers.com/showthread.php?t=431217
then download ship rom to flash your HD.
longnguyen30 said:
follow to:http://forum.xda-developers.com/showthread.php?t=431217
then download ship rom to flash your HD.
Click to expand...
Click to collapse
Thanks for linking to the post, I just added the steps
The OP however says that they have already flashed back to the stock ROM, but that the colours are screwy. This needs the stock SPL restored as well in order to recover normal functioning (or at least so that they can send in for repairs without voiding the warranty).
ClydeB1 said:
Thanks for linking to the post, I just added the steps
The OP however says that they have already flashed back to the stock ROM, but that the colours are screwy. This needs the stock SPL restored as well in order to recover normal functioning (or at least so that they can send in for repairs without voiding the warranty).
Click to expand...
Click to collapse
note that; if you restore stock SPL 114 or 115 please download the same rom version for flashing.
ex: when you restore SPL 114 you must have ship Rom:http://rs68l32.rapidshare.com/files....479.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
because the different SPL & Rom version will make wrong screen.
wow, thank you very much for the quick and usefull replies!
I installed this ROM:
http://rapidshare.com/files/2189268...6.404.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
So after this I have to install original SPL? Can you guys see which one?
Thanks in advance!
mcowly said:
wow, thank you very much for the quick and usefull replies!
I installed this ROM:
http://rapidshare.com/files/2189268...6.404.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
So after this I have to install original SPL? Can you guys see which one?
Thanks in advance!
Click to expand...
Click to collapse
firstly you must Hard SPL 1.56 Olinex
secondly flashing your rom
And restore with SPL 1.13 I assume?
mcowly said:
And restore with SPL 1.13 I assume?
Click to expand...
Click to collapse
The process of restoring stock rom/SPL is only to be used if you plan to return device. If you are wanting to keep you you mentioned earlier then you would need to put either USPL or HSPL on your device first. I would recommend USPL for you as it would be easier to return to stock SPL afterwards.
Once you have rom on your device, DO NOT restore stock SPL afterwards. You only restore this if you plan to return your device. If you did you would have to go through whole process of putting USPL or HSPL onto your device again to flash another rom.
The phone has to be returned because of screen problems.
I will put SPL 1.13 on it and then flash the earlier mentioned ROM.
Then return to HTC
mcowly said:
The phone has to be returned because of screen problems.
I will put SPL 1.13 on it and then flash the earlier mentioned ROM.
Then return to HTC
Click to expand...
Click to collapse
No probs. Out of curiosity what screen problems do you have? Are they Hardware problems or is it something else which could possibly be fixed through the assistance of xda users
It's the phone of my brother, he tells me that the screen doesn't respond anymore, so he can't get past the calibration!
I'll give an update when HTC fixed this (or replaced it )
Thanks for all the help!
I'm doing this right now. I had been using Dutty's V6 before. I never updated the radio, so Ishouldn't have to change it, right?
Anyway, I flashed the stock RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe rom, and that went fine. I'm trying to flash the stock 1.13 spl, and I get error 202: connection. It thinks it can't see my phone, even though it does the initial connection, and even sees what version (1.56) of the spl is on there. Any ideas?
Ok, I did this: I put the phone into bootloader manually by pressing up when it boots up to get to the tricolor screen. That let me run the 1.13 spl pdate, and it said it completed successfully. However, when it boots ups, it still shows D:1.56 olinex or whatever. Did it not work?
Ok, acutally I think it did load up. The Bootloader shows SPL-1.13.0000. So why does it show:
R1.13.25.24
G52.62.25.34u
D1.56.00.00
Is this ready to send in for service?
scythe000 said:
Ok, acutally I think it did load up. The Bootloader shows SPL-1.13.0000. So why does it show:
R1.13.25.24
G52.62.25.34u
D1.56.00.00
Is this ready to send in for service?
Click to expand...
Click to collapse
If your SPL says 1.13.0000 then you are fine to send phone in for service.
R1.13.25.24 - Radio Version
G52.62.25.34u - Protocol Version
D1.56.00.00 - ROM Version
All queries answered
Hi Guys,
I've got the HTC currentyl configured with a custom ROM. Lately it has been giving me trouble in sending/receiving text messages, not receiving incoming calls, not downloading weather data automatially etc.
I did try installing a couple of different ROM's and had the same problem. So I thought I will go back to the original stock ROM and OS and see if I still have the problem and then get HTC support to look into it.
Now, the thing is, I dunno how to find the Stock OS. I found several threads with regards to going back to the stock ROM... but no one seems to talk abt the OS. I had windows 6.1 installed along with Manilla 2.1 on the phone originally.
Pls help me....
From this thread. It is basically the reverse of flashing. ie Flash rom and radio (normally in one package) and then flash to stock spl.
How to reflash Stock/Shipped SPL - STEP BY STEP
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!! (You can find stock roms here)
1. download your choice of a stock spl package from this post. (currently either 1.13, 1.14, 1.15, 1.54 - depending on the rom used)
2. also download the original hardspl from the attachments in the above linked post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
Click to expand...
Click to collapse
Please post further queries in relevant thread. Link already provided by ClydeB1 above
Thread closed
Hi Guys,
I have a DUTCH Touch Pro 2 and I want to remove hardspl for warranty reasons(speaker is broken). should I follow the steps below, or is there another way to remove it?
how to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. download the Relocker attachment, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). the included one is the 0.79.0000 stock SPL. you also have the option for 0.84.0000 and 0.87.0000, see the attachments.
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.79.0000 (or 0.84.0000 or 0.87.0000), not 0.85.OliNex.
PLEASE HELP
in my tytn days, I kept the hardspl, only reflashed the old ROM. never had any problems. just got a new one from the htc repair service.
quarintus said:
in my tytn days, I kept the hardspl, only reflashed the old ROM. never had any problems. just got a new one from the htc repair service.
Click to expand...
Click to collapse
How many times were you able to get a replacement under the warranty with HardSPL? This may save a lot of heartache later since I've noticed the method to flash HardSPL on the Rhodium to be more finicky than on past HTC's I've owned.
Just follow the steps.
BTW: HTC know to look for "OliNex" in the bootloaders.
And more problems, please ask in the Hard SPL / Flashing threads.
Closed.
Dave
Hi, i'm totally new to flashing phones etc. I have a tytn II and was running windows 6 on it.
I Flashed it with Hard SPL, and then downloaded TPC 23053 Titanium Ultimate. It's the one on the thread that says you don't need to flash a stock ROM first.
I flashed it and all went fine, booted up and alligned the screen etc. It then rebooted itself then loaded back up. All seemed to be ok, sound and camera wasn't working. In the fourth post of the titanium thread, it says the recommened SPL and radio.
which are Recommended SPL 3.34 Radio 1.70.18.02
So i downloaded both, flashed the SPL and then the radio. Now when i boot i get a black and white image of a tribal kind of dragon. It asked me to setup the phone again so i alligned the screen again. Sound and camera now worked.
However, i was usuing it for a while and then for some reason programs stop loading, it says something like, it's write protected or make sure you have the correct security permissions. When i plug into the pc i can't get anything off the storage card or the phone, it says permission denied.
So when i reboot the phone, it keeps asking me to setup again so i lose all my contacts that i have added etc. I can turn the phone on and off and it's fine, but then eventually does the wierd permissions and access denied thing and when i reboot always asks me to setup the phone.
Can anyone help me as to why this is doing this? I read something about CID unlock etc, is it to do with that because i didn't perform this step.
Not sure why everytime i reboot the phone it asks me to setup the phone again, sometimes it doesn't, it's usually after it stops letting me open programs.
Thanks in advance and sorry for the long post.
Maybe reflash.
You should have posted this in the thread made for the rom.
Thanks for the reply, sorry it's in the wrong place.
Can i flash back to windows 6, is this possible as titanium is 6.5 and do you know where i can find the "stock rom" for the tytn ii.
I think the problem is i didn't flash to stock rom first, but i was already running the stock rom. What was on itwhen i bought it from the shop so it's the same thing isn't it?
Obviously you must have flashed Hardspl and sim/cid unlocked your phone. Upgrade your hardspl reflash with a stock 6.1 rom from the wiki .I know it says that you don't have to flash stock first, but when flashing 6.5 roms, it is always a good to flash stock first to clean out the extended rom.
Flash a stock rom , flash ultimate, hard eset and the set up.
Thanks, i will try it now. I'm following these instructions. Do i need to do all of this including the bootloader, or just to restore the OS to step 2? Also once done do i need to reinstall HardSPL?
1. Get the original ROM for your device (HTC or ATT)
2. Flash the OEM ROM to your device (this will restore your OS but not the bootloader, we'll get to that below)
3. Copy the ROM to a temp folder and extract it, I use WinRAR, just right click on it and select "Extract to Here"
4. After extracting the ROM you should have a several files here, one called RUU_signed.nbh is the one we're looking for. Copy this file to another empty temp directory.
5. Download NBHExtract and follow the instructions in the link to extract the NB files from the ROM (essentially just copy nbhextract.exe to the temp folder where the nbh file is and run it from a command line - like so C:\temp\kitchen\>nbhextract.exe RUU_signed.nbh
6. You should now have several .nb files in that directory, the one we're interested in is the 01_SPL.nb.
7. Now you have to create an NBH file with just the SPL, to do that download htcrt (HTC Rom Tool).
8. Run the tool and under the ROM Builder tab select Kaiser, the rest on the left side doesn't matter right now. On the right side of this window click the "..." next to SPL and select the 01_SPL.nb you extracted from the OEM ROM. This should be the only thing added under Firmware Contents. Click Build ROM.
9. You should now have a NBH file that is relatively small (about 258K), copy this NBH file to a new empty directory
10. Download pof's KaiserCustomRUU.exe and put this in the same directory used in step 9. Don't run this yet.
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
13. When you have the bootloader screen on your phone run KaiserCustomRUU.exe from the folder used in step 10.
14. After it's finished verify your SPL by holding down power and camera buttons while doing a soft reset.
15. Send your device back for warranty repair or replacement.
No you don't have to do all that. That is just if you want to restore your phone for warranty return. All you have to do is go to the wiki. http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs and download a stock rom to your desktop. Connect your phone and run the RUU and follow the onscreen.
After your phone is flashed with stock, just reflash Ultimate the same way.
First however , enter bootloader , depress camera and power button while soft resetting, and check your spl, if it is still 1.0 olipro , upgrade it first to 3.29 or 3.34 using this guide. http://forum.xda-developers.com/showthread.php?t=498320
Once your phone is hardspl'd you never have to do it again
Thanks very much for your help. I have 3.29 on there at the moment, should i flash to 3.34, then flash to stock rom, and then to ultimate again.
Or flash stock rom, then 3.34 SPL and then ultimate?
Mitchsnake said:
Thanks very much for your help. I have 3.29 on there at the moment, should i flash to 3.34, then flash to stock rom, and then to ultimate again.
Or flash stock rom, then 3.34 SPL and then ultimate?
Click to expand...
Click to collapse
You can do it both ways it doesn't matter since you already have hardspl on your device and basically you are updating the current 3.29 to 3.34 to have a better performance with the ultimate rom.
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Mitchsnake said:
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Click to expand...
Click to collapse
No, it's important to remove it. How long are you leaving the battery out for? And was it over 50% charge before you removed it?
I'm assuming you followed steps 1-4 to the letter.
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
It sounds like there could be a hardware problem from all the hard resets happening there. Have you made sure that the reset button at the bottom is functioning correctly and isnt blocked by any dirt etc?
Mitchsnake said:
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Click to expand...
Click to collapse
I wouldn't complicate things that are more than clear. The intructions literally says the following: 2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*. Just follow them, probably mskip for doing this tutorial spent a lot of time "trial n error". It really won't take anytime to do this step
Yep i follow those steps. I leave the battery out for about 30 seconds as it says. But obviously it hard resets so i can't do this at all as the files aren't there when i put battery back in. I have to set up the phone again.
I suppose i could just flash the stock rom, then see if that works when i remove the battery and then i can update the SPL? soft reset isn't blocked by dirt either.
If that fails i'm stuck with a bad phone
Mitchsnake said:
Yep i follow those steps. I leave the battery out for about 30 seconds as it says. But obviously it hard resets so i can't do this at all as the files aren't there when i put battery back in. I have to set up the phone again.
I suppose i could just flash the stock rom, then see if that works when i remove the battery and then i can update the SPL? soft reset isn't blocked by dirt either.
If that fails i'm stuck with a bad phone
Click to expand...
Click to collapse
Well yeah... if you had read it all you would know that you are meant to be doing all of this using a stock rom on your device. There's your problem right there.
If you already have hard spl on your phone so you don't need to go through all the steps of flashing hardspl for the first time. Just upgrade the easy way from the SD card.
I have had 3.29 on my phone and have flashed over a hundred times with never a problem, including Ultimate several times. Just try flashing a stock rom first and then Ultimate. Then hard rest and then setup the rom. If i works great, if nt then you can always upgrade your spl later.
Stuntdouble, theres no need to be like that, some people are new to this, and if you had read my previous posts you'll see that i didn't flash to stock rom first, because i'd just got it from the shop, so the stock ROM was already on it. I didn't think i needed to flash it with the same one again first. Thanks for the help though everyone, I've now flashed stock rom, and gonna try ultimate again/
Sorry, but the amount of people on here who don't actually read FAQ's/Stickies before flashing their device don't get much sympathy from me. I think people underestimate the risks involved when flashing for the 1st time. However i've been having a bad day so I apologise for snapping.
Yeah no worries, it annoys me too when there are tutorials yet people can't be bothered and just post asking how to do something. But the only reason i didn't flash a stock ROM was because i got it from the shop so didn't think i needed too.
There is something i would like to know though that i can't find how to do. I'm trying to install 3.34 Hard SPL now, i have 3.29 at the mo. I don't have a card reader unforunatley so can't format my card to FAT32 like it says to if installing from card.
Is there an easy way to upgrade it other than using storage card? Or can i do the same steps as when i first did it. i.e, run the JumpSPL 1.56 but instead of opening the 3.29 KaiserCustomRUU, i open the 3.34 Kaisercustomruu?
I apologise if this info is anywhere, but i've read all the faqs and searched google and can't seem to find a guide on upgrading SPL from 3.29, it only tells you how to first install 3.29.
Thanks.
Off with their heads!
Ok i ran JumpSPL 1.56 and then ran the KaiserCustomRUU of the 3.34 Hard SPL, now when booting i get the dragon spaslh screen, but when i go to bootloader, it still says 1.29.
What am i doing wrong?
Fixed this now, thanks for everyones help appretiated
X1 problem to hardSPL for newer SPL version 0.78.0000
Hi, I am ALi , sorry to bother, but just done some HardSPL on my X1,
last time the SPL ver was 0.78.0000
i read many of method to flash a newer ROM must HardSPL first their X1,
the problem is, I had already HardSPL it to SPL ver 0.72.0000, the process was a success
but
it stucked/bricked at tri-color mod, so i had it settled from
forum. xda-developers. com/showthread. php?t=455553 thread reported by MALIK,
i noticed that before down grading my X1, the ROM ver was UK_GEN_R3AA010,
but
after HardSPL to ver 0.72, i cant flash the original ROM UK_GEN_R3AA010 back, instead of that only ROM UK_GEN_R1AA017 are working with my current flashed SPL ver 0.72.
I tried to Hard SPL to 0.52 Olinex version (i didnt find any 0.72Olinex!! just 0.52 Olinex, where can i found the 0.72 ver of olinex?? does the 0.72Olinex really exist?? i am so much confiused now and really tired of trying to make it work in almost a week!!) so many time but fail, by USB, by SDcard (also try to replace my SD-HC4gb to Nokia SD 256Mb) neither of that method work!!
please help...
i am desprate to implement newer ROM on my X1 so called Kovsky....
please admin/engineers/developers help.... my head are getting bolder than b4 huhuhuuuuuu........
-ALi
Terengganu, Malaysia
p/s: i am uploading some of my pic shot while the problem persist right now to photobucket, but i am affraid that i didnt have any permission to attach th pic since i was a newbee....
The hardSPL 0.72Olinex can be found here (X1_HardSPL_v1.zip):
http://forum.xda-developers.com/showthread.php?t=431218
Also there is a detailed describtion on how to hardSPL your device:
http://forum.xda-developers.com/showthread.php?t=431218
For questions you can try the search button here, if you can't find any on this subject (which I doubt, because the question has been asked more than once in the thread) reply to the thread:
http://forum.xda-developers.com/showthread.php?t=431218
I've flashed my X1 with hardSPL and back to stock SPL a number of times, never without succes. From 0.720000 to 0.72Olinex to 0.720000 and from 0.780000 to 0.72Olinex.
So when you can't hardSPL from your pc there must be something wrong with the connection between pc and X1.
If you want a newer ROM with stock SPL, connect your phone with stock SPL 0.720000 to SEUS and SEUS will automatically update SPL to 0.780000. After that you can flash R3A ROM.
The other way through hardSPL and the manual download of R3A from PavelX1's sticky.
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
motok said:
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
Click to expand...
Click to collapse
Download you stock ROM from PavelX1's sticky thread and flash it...
Tnx you saved me from hours of searching
Hi Lokhato,....
thankx for the advice,... if ou wont tell me about the SEUS, sure my X1 i declared it DEAD!!! I was accidently HardSPL it to 0.72.0000 i think...., because of i tried so many times to HardSPL the OLinexSPL to my X1 but it aint workin. but then when i replace the RUU_signed.nbh that got version 0.72.0000stockSPL it worked AND THEN it STUCKED at the boot screen says that please wait, continue to upgrade ROM.... damn i resolved it...
so my step on recover to the latest stock SPL 0.78.00 are like this,...
1. download the SEUS from XPERIA website.
2. try to READ and FOLLOW the instruction stepbystep. even whenever the application ask you to restart the PC/LAPTOP, please make it done so....
3. whenever SEUS asked u to enter the bootscreen, MAKE SURE you take out the SD out from your phone. and let the SEUS flash the OriSPLver 0.78.0000
4. then it blinks several times after the progress bar finished, and it also stucked at bootscreen saying to continue updating ROM.
5. in this situation, please flash back your ROM with ROM UK_GEN_R3AA010 not the R1 or R2 ROM. so to manually flash the R3 ROM, copy the R3 image file to your freshed format SD and named it kovsimg.nbh
6. so put the SD in X1 and soft reset the X1 by pressing the reset button with your stylus at the back panel of X1.
7. let it load the image whenever it enter the boot screen again
8. press the power button to confirm upgrade ROM.
9. it should state there SUCCESS!! and you must HARD-RESET the X1.
9. waitt...... and wait...... be very patient, take a break... let it run.....
10. you are DONE!!
enjoy your original flashed ROM,...
if you not like it,
from this point you can just simply HardSPL it to 0.72Olinex by downloading the X1_HardSPL_v1.zip
then go get another ROM and repeat step 5.
as my observation...
SPL 0.72.0000 can flash img from R1,
R2 I dunno can flash or not, never try it...
SPL 0.78.0000 can flash img from R3
HardSPL it to OLinex ver 0.72OLinex ver, then you r good to go to flash any ROM you like!!
damn what a hard week!!! at last i got it to flash the HardSPL on my X1
last but not least.... just want you all to know that i was doing those step above from my mom's laptop current spec was CentrinoDuo, mine that always hanging whenever try to flash any SPL was on SempronAMD Laptop + always BlueScreen error even after i freshed repair my .NetFramework ver3.5sp1. so if you facing any problem on SPL our X1, try to done the upgrading on another PC/laptop, i believe that Intel based processor was more stable than AMD i think...
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Lokatho said:
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
but
- last time my original 0.78.0000 cant do HardSPL
- after accidently flash the 0.72.0000 by using RUU but at the same time i copy the stock0.72 SPL to RUU folder,,,... or my mistaken to copy to SD also by renaming it to kovsimg.nbh i think, just cant remember at that time, and still cant HardSPL + hangging somemore....
- after SEUS updates to newer stock SPL 0.78.0000 like before it was very easy to HardSPL with 0.72OLinex..... wonder y.....
hmmm... CustomRUU??... i think if i try that method would always get the ERROR code rather then success huhuhuuu....
for now i just stick to flashing ROM using Nokia SD 256Mb if the img can fit it in....
thank you so much anyway bro...
u da man!!!!
Lokatho said:
Don't know if you can use the SD-card flash
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Several roms do have panel manager installed so there is a use for the X Button
in case it is not cooked in you can add it manually. Also XMapper is available for alternative uses of the button...
Finally, if Silent_UC is supported by the rom you can bulk install many apps, registry edits, etc. after flashing the rom or afterwards. Just search...
putrabiru said:
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Click to expand...
Click to collapse
hardSPL can be done without a problem from 0.780000. I did it several times after I brought it to repairs.
In post #5 in the EnergyROM thread you can find a link on how to install the panelmanager, from R3A and X2. This works with all roms which don't have the panelmanager installed.
Mod. edit: not dev related, moved to general
I am very happy now! Just managed to update my SE X1 after SEUS 0.78!. As others suggested downloaded R3AA010 (APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010), but used NBHUtil to extract ROM. That was a mistake! I simply renamed R3AA010 to Kovsimg and put it in my SD 2 Gb card. Ufff, after 2 weeks of endless reading the forums and thying this and that... Finally!!!!