Related
I really need all the expert out there to help me on flashing my CHT9110. I'm not sure if flashing CHT9110 is the same as flashing P3600i?
Anyway there is an instruction post by ajajaj and credit to Olipro for the great help. I follow every step stated by ajajaj but still I couldn't get my phone flash to WM6.1, therefore I'm pleading for help here.
Step 1 - Anyway First of all, load the Hard SPL to your phone from : http://forum.xda-developers.com/showthread.php?t=398742
Click to expand...
Click to collapse
From my understanding I need to download the Hard SPL, but what does it mean by load the Hard SPL to your phone? Does it mean I unzip the hard spl and double click ROMUpdateUtility.exe on my PC? I tried to double click anyway and my phone boot to tri-color mode, there my phone get disconnected, doesn't matter I press power, camera button, and push the reset button and my phone start in tri color, again I run the ROMUpdateUtility.exe and this time it run and finish 100% but after that it return an Error[270] Image corrupted.
Then I ignore this first step and proceed to following steps
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Click to expand...
Click to collapse
Yes I downloaded
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Click to expand...
Click to collapse
Also downloaded
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Click to expand...
Click to collapse
I unzip the rombaker and custom ruu. I overwrite the rombaker into custom ruu/workshop folder
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Click to expand...
Click to collapse
I copy the ruu_signed.nbh from WWE_ASIA folder to custom ruu/workshop
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Click to expand...
Click to collapse
I extract it and get 00_OS.nb as output
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Click to expand...
Click to collapse
I run the rombaker and I fill IPL, SPL, OS, ExtROM, GSM, SubSplash, MainSplash with 00_OS.nb and name the file called new_nbh. So I get new_nbh.txt as the output.
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Click to expand...
Click to collapse
I open with text editor and change the last line to 401 from 400 as below
TRIN100
SuperCID
ROMBaker
XDADevelopers
100,00_OS.nb
200,00_OS.nb
600,00_OS.nb
601,00_OS.nb
900,00_OS.nb
300,00_OS.nb
401,00_OS.nb
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
Click to expand...
Click to collapse
I did exactly been instructed here
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
Click to expand...
Click to collapse
I copy the ruu_signed.nbh from workshop folder back to RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder and run the ROMUpdateUtility.exe
After all the next next thingy, it turn black and doesn't go into the tri color. Tried to push power, camera, and reset button and boot in tri color, run the ROMUpdateUtility.exe again it stop at 1%
Can anyone tell me where I went wrong?
Thank and appreciate all your help.
wssoo said:
I really need all the expert out there to help me on flashing my CHT9110. I'm not sure if flashing CHT9110 is the same as flashing P3600i?
Anyway there is an instruction post by ajajaj and credit to Olipro for the great help. I follow every step stated by ajajaj but still I couldn't get my phone flash to WM6.1, therefore I'm pleading for help here.
From my understanding I need to download the Hard SPL, but what does it mean by load the Hard SPL to your phone? Does it mean I unzip the hard spl and double click ROMUpdateUtility.exe on my PC? I tried to double click anyway and my phone boot to tri-color mode, there my phone get disconnected, doesn't matter I press power, camera button, and push the reset button and my phone start in tri color, again I run the ROMUpdateUtility.exe and this time it run and finish 100% but after that it return an Error[270] Image corrupted.
Then I ignore this first step and proceed to following steps
Yes I downloaded
Also downloaded
I unzip the rombaker and custom ruu. I overwrite the rombaker into custom ruu/workshop folder
I copy the ruu_signed.nbh from WWE_ASIA folder to custom ruu/workshop
I extract it and get 00_OS.nb as output
I run the rombaker and I fill IPL, SPL, OS, ExtROM, GSM, SubSplash, MainSplash with 00_OS.nb and name the file called new_nbh. So I get new_nbh.txt as the output.
I open with text editor and change the last line to 401 from 400 as below
TRIN100
SuperCID
ROMBaker
XDADevelopers
100,00_OS.nb
200,00_OS.nb
600,00_OS.nb
601,00_OS.nb
900,00_OS.nb
300,00_OS.nb
401,00_OS.nb
I did exactly been instructed here
I copy the ruu_signed.nbh from workshop folder back to RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder and run the ROMUpdateUtility.exe
After all the next next thingy, it turn black and doesn't go into the tri color. Tried to push power, camera, and reset button and boot in tri color, run the ROMUpdateUtility.exe again it stop at 1%
Can anyone tell me where I went wrong?
Thank and appreciate all your help.
Click to expand...
Click to collapse
First up you are way ahead of me in getting to the stage where you have been able to modify the nbh, well done.
I am not sure this ROM works even after being modified, but you can give it a go.
To flash the modified ROM.....first put your phone into bootloader mode...ie camer..power and soft reset. It should come up with the tri-colour screen and show SPL Olipro 3.2. something. If it doesnt show Olipro then the Hard SPL you did earlier didn't work.
If it does...connect back to your PC via the USB cable and then run ROMupdate. It will then go through and flash the phone.
All the others have said this ROM flashes and then hangs at the boot screen.
Good luck...let us know how you go.
don't use that ROM... it doesn't work
go HERE to see the ROMs that have been tested and work with the P3600i
there's only 2 (tested) ones there, but at least they work
if those ROMs don't work, i don't know what will - i've tested both myself and they work fine
like andych said, make sure your bootloader (3 colour screen) says Olipro 3.2 on it, to make sure you have HardSPL... otherwise you haven't put that on yet - if you haven't do it again, then flash with a ROM from the link i gave
If I run the ROMupdate when I'm in WM it show
TRIN100
IPL-1.00
TRIN100
SPL-olipro 3.20
But if I boot into the bootloader mode, and I see
TRIN100
IPL-1.00
TRIN100
SPL-3.03.0000
am really confused on how to go about it
joncgde2 said:
don't use that ROM... it doesn't work
go HERE to see the ROMs that have been tested and work with the P3600i
there's only 2 (tested) ones there, but at least they work
if those ROMs don't work, i don't know what will - i've tested both myself and they work fine
like andych said, make sure your bootloader (3 colour screen) says Olipro 3.2 on it, to make sure you have HardSPL... otherwise you haven't put that on yet - if you haven't do it again, then flash with a ROM from the link i gave
Click to expand...
Click to collapse
I just wanna be sure, with the 2 given ROM, I need not do any changing of 400 to 401, and etc? Just run the ROMupdate and everything will run smoothly?
OK
You need to run Hard SPL again.
Connect to your PC and make sure activesync has run properly and your phone is on.
Open Hard SPL and run the ROMupdate. Your phone will go to tricolour and it will come up with a communication error.
disconnect from PC but leave the phone in tricolour....DO NOT reset it.
Cancel our of the ROMupdate. connect the phone to the pc again and run ROMupdate again.
This time it will go all the way through and you will have HardSPL on your phone.
Check it by entering bootloader and it should show Olipro 3.2.
You can then flash away....make sure you always put the phone into bootloader before flashing.
Let us know how you go.
Ok once I get communication error, I disconnect from PC, cancel the ROMUpdate, then I reconnect to my PC again.
This time do I run the Hard SPL or the rom from ajajaj?
I tried both it however reset my phone to tri color and I dont see olipro 3.2 anymore
wssoo said:
Ok once I get communication error, I disconnect from PC, cancel the ROMUpdate, then I reconnect to my PC again.
This time do I run the Hard SPL or the rom from ajajaj?
I tried both it however reset my phone to tri color and I dont see olipro 3.2 anymore
Click to expand...
Click to collapse
You need to run the ROMupdate from HardSPL again......
Only when you have Olipro 3.2 on the bootloader can you run the ajajaj ROM.
Guess it is really giving me a big headache.
Here is my scenario
My phone is on, I connect to activesync and run harl spl romupdate
My phone boot into tri color mode with SPL-3.10.olipro
Then I get error ERROR[260]: Connection
I exit
Disconnect phone from PC
Now comes the part that seems like only I'm the one facing problem.
I connect my phone back to my pc. My phone still in tri color mode I still see SPL-3.10.Olipro
Now I run the romupdate for hard spl again
I see the loading bar but I'm stuck at 0%, then my phone restart and reboot in tri color, now I see SPL-3.03.0000
Alright fine, I reboot on my phone connect to pc run hard spl romupdate till I get Connection error. Now I close romupdate and disconnect from PC.
I reconnect and run the ROM Mary instead. Again failed.
Did I miss any step? Or those are for P3600i and not CHT9110? Any different?
wssoo said:
Now comes the part that seems like only I'm the one facing problem.
I connect my phone back to my pc. My phone still in tri color mode I still see SPL-3.10.Olipro
Now I run the romupdate for hard spl again
I see the loading bar but I'm stuck at 0%, then my phone restart and reboot in tri color, now I see SPL-3.03.0000
Click to expand...
Click to collapse
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.
joncgde2 said:
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.
Click to expand...
Click to collapse
acutally i want to ask after successfully update the hardspl
what number will show?
3.10 or 3.20
mine is 3.20
so strange, but i still can flash to mary rom
joncgde2 said:
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.
Click to expand...
Click to collapse
Well I've tried. The only way for me to accomplish 100% on bootloader is when my phone show SPL-3.02.0000, if I run hard spl romupdate at this point of time, it will complete 100% but sadly after that, it return
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility
wssoo said:
Well I've tried. The only way for me to accomplish 100% on bootloader is when my phone show SPL-3.02.0000, if I run hard spl romupdate at this point of time, it will complete 100% but sadly after that, it return
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility
Click to expand...
Click to collapse
**Am using Windows XP SP2
i'm sorry, you seem to have a big problem with your phone :/
i don't think we can help you any further - hardspl to get into bootloader the first time, you get the error, you run the program again with the phone in bootloader and the hardspl should complete.
then you can soft reset and it should have 3.20 olipro on the 3-colour screen.
if this doesn't work for you, maybe it won't work at all
wssoo said:
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility
Click to expand...
Click to collapse
Which Ruu Update utility did U use? 3.1.3.2 or 3.14.4.1? If you use the one that came with hard-SPL, try using the 3.14.4. U can get this here http://forum.xda-developers.com/showthread.php?t=321182 extract this then change the RUU_signed.nbh with the hard-SPL one, then flash your device as described above.
Argyle0297 said:
Which Ruu Update utility did U use? 3.1.3.2 or 3.14.4.1? If you use the one that came with hard-SPL, try using the 3.14.4. U can get this here http://forum.xda-developers.com/showthread.php?t=321182 extract this then change the RUU_signed.nbh with the hard-SPL one, then flash your device as described above.
Click to expand...
Click to collapse
I'm using the default ruu_signed.nbh that come along with Hard SPL. Unsure what version it is. Anyway I downloaded RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite.rar from the net too? Is this you are talking about? I overwrite the ruu_signed.nbh to Olipro's Hard SPL ruu_signed.nbh?
wssoo said:
I'm using the default ruu_signed.nbh that come along with Hard SPL. Unsure what version it is. Anyway I downloaded RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite.rar from the net too? Is this you are talking about? I overwrite the ruu_signed.nbh to Olipro's Hard SPL ruu_signed.nbh?
Click to expand...
Click to collapse
Download the RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe then right click to extract (winrar installed). You should see a some files in the directory you extracted to. Find the RUU_signed.nbh, DELETE IT. Then copy the RUU_signed.nbh from the Hard-SPL to the above directory. Run the ROMUpdateUtility.exe.
Sadly I've tried Argyle0297 still getting the same old error msg.
I think it is lock on the SPL or SuperCID is it?
I know how frustrating it is .... this happened to me too.
BUT the one i got is not CHT9110, it's HTC P3600i with chinese rom installed (originally SPL-3.03.xxx). Maybe there's a difference between the two devices. Anyway if you want to give it another try, download the file below. It's the one i successfully used to flash the HardSPL.
Good Luck.
Argyle0297 said:
I know how frustrating it is .... this happened to me too.
BUT the one i got is not CHT9110, it's HTC P3600i with chinese rom installed (originally SPL-3.03.xxx). Maybe there's a difference between the two devices. Anyway if you want to give it another try, download the file below. It's the one i successfully used to flash the HardSPL.
Good Luck.
Click to expand...
Click to collapse
Thank.. am downloading it and will try it right away after work..
Crossing my finger..
Need a favours over here. Recently, i bricked my trinity. P3600 more precisely Dopod D810 (i flashed wrong ROM -> Unpacking cooked rom for trinity but i merge it with -Hermes cmd in NBMerge! houh... so stupid! ). Soo... just not what i expected, Rom flashing stop on half, SR my trin and tada.... 3Color screen bootloader popup! haaarggg, i try flashing another rom using any rom that has same CID *official or cooked rom* (some are 100% thru, but someother not) but like usual it won't start the windows (just blank/black screen with green led[ always on!) Never been like this before! Have been flashing several times using any cooked rom by great chef on trinity but this time! :doh: damn it! my bad.
i found solution on the forum *Unbricking Trinity Stuck on Bootloader* but since my usb port can't be detected on my vista/xp machine, whether i disable AS and changed my usb cable it doesnt work at all, on mtty too! so i can't use that utility. i try run install sspl olipro 1.3 but it never changed my spl at all. now i can't use my trin at all cuz allready dead.
btw this is the info on trin 3color screen bootloader:
IPL 1.00
SPL 3.20 OLIPRO
anysolution for bringing back my trinity from the death? maybe a tools/utility to unbrick trinity from SD or something like that, which not involved any pc connection, without bring this devices to htc center of course.
I hope any expertise on this forum would helped me sort out this probs.
Sorry for my english and thanks for reading my post.
Read this :http://forum.xda-developers.com/showthread.php?t=308691 download splxploit-windows.zip (935.1 KB, 7619 views) put phone in bootloader run splxploit when bootloader change
After this download full rom here is link:http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
Then flash full rom bat do not disconnect usb cable in any step.
Before use any step disable active sync.
Usb are dead
Gsmhacks thanks for ure reply. I have tried that one, and lot read ing on wiki. But since i cant use the usb i cant use that splexploit whether on live linuxcd, or .Net version even win version. The usb port cant be opened . I think i broke the usb pin. From the beginning everytime i flashed my trin i never used ruu utility, i always do the sd card method and that is the best and easiest method and it works for me.
I just curious perhaps can anyone or is there any utility to unbrick trin via sd card. I knew a lot a people has bring their trinity life from dead by using htc stackflow splexploit. I hope that was work for me too! Too bad my usb are dead. Damn!
Here what you need bat only work if you have hard spl
If you install hard spl before brick trinity you can use SD CARD to flash trinity. YOu need to formate sd card to FAT32 with Card Reader donwload full rom here is link: http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
then extract and file RUU_Signed.nbh rename to TRINIMG.nbh and copy it to the root folder of your miniSD card.
Here is full instruction again also first format sd card to FAT32 !!!! VERY IMORTANT to format sd card to FAT32 or all other step will not work THEN:
1. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract (or you can also use winrar via wine).
2. Rename the .NBH file to TRINIMG.nbh and copy it to the root folder of your miniSD card.
3. With miniSD card inserted on the phone, start the bootloader (hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom).
4. You should see the screen pictured on the left, confirm flashing on screen by pressing the power button.
5. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
6. When flashing completes soft-reset your device.
and you will flash and unbrick trinity bat this only work if you install before this hard spl i mean cid unlock trinity. if not you must fix usb port.
That will work? I hope so
Ok then i'll try flashing using that rom. Oo, i have install hardspl btw and so far flashing using sdcard method no probs. But after i bricked my trin flashing doesnt smooth like be4. Always gave me error 0018003 update fail on the halfway, i guess because i have bad nand on trin and probably cuz cooked rom.
Can u give me another link, perhaps on xda ftp. rapids so slow 4 me. Btw i have download dopodasiawwe official rom on xda ftp *twice but still when i tried to run the package it gave me corrupt archive integrity fail w!f.
Thanks gsmhackerns, i downloading the package now!
Perhaps you can find a way to make a goldcard for Trinity?
See http://forum.xda-developers.com/showthread.php?t=437996
That's what i looking for! Thanks.
Humm, superb. Yay, great! Thank you stepw. Even its for elf with a little mod i hope this will work. Once again thank you.
Stepw, i have tried making the gold card, everything went ok. I have temp. cid *supercid* but the probs now is i can't download http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.execan someone uploaded to somewhere else. Rapidshare crap! perhaps on xda ftp.
thanks!
goldcard cannot help in such a situation.
I can however make an SSPL that loads off SD card - just like for kaiser you will be able to use it because you are already on hardspl.
then that will allow you to flash stock SPL.
PM me and send your MSN address, so we can test it out. if it works i'll post it in this thread too in case others get stuck also
cmonex said:
goldcard cannot help in such a situation.
I can however make an SSPL that loads off SD card - just like for kaiser you will be able to use it because you are already on hardspl.
then that will allow you to flash stock SPL.
PM me and send your MSN address, so we can test it out. if it works i'll post it in this thread too in case others get stuck also
Click to expand...
Click to collapse
Indeed. Youre right cmonex, it doesnt make any difference at all 4 my trin. After several tried using and making goldcard 4 trin, finally i made working goldcard4trin, but gosh it still stuck when i tried to update the os (update os fail) humm anyone.
Sorry for wasting your time with Goldcard, I have overlooked that you have a hard spl on your Trinity. In this case goldcard doesn't make a lot of difference.
And there's no trindiag.nb to the best of my knowledge that could be used instead of SSPL cmonex is suggesting to run from SD.
Back to the topic, sounds like you have some "bad" blocks in flash and OS can't be flashed. Bad blocks can be reset with "task 2a" command, see this thread for more details:
http://forum.xda-developers.com/showthread.php?t=330496
The question is how to run it without USB and I don't have an answer for you
Some people have previously mentioned they managed to flash smaller OS images when larger images failed, perhaps if you try flashing some minimal vanilla ROM, it will succeed?
Bad NAND, Yup!
Ya... as i mention before yup i do have bad nand block on my devices. Using manila rom with smaller img size the flash went 'OK'. But it doesn't boot at all infact just black screen with green led on.
Okay the only solution probably use mtty and do task 2a if i'm not mistaken. But like you said "The problem is the USB port". I think the port is ok cuz i already tested it connecting my usb to my trin without inserting the battery and the red led *magenta* is on. humm, weird!
But if something can make it working without involving any pc connection it would be a great achievement. hahah! well i supposed i have to put my trin on bunker before someone can make it happens
I asked SEA in my country and they recommend me to changed the machine it self and they charge me around US $160 ho...ho.. too "wideeeeee" for college boy like me
Same problem, i flashed the rom
RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship
and after that i tried to flash a new radio!
power+cam and the cell phone did not show usb, then i used sspl to rum the radio but it locked at 0%
after that it is stucked at bootloader screen
ipl 1.0
spl 3.20 .....
but no usb and no sd card !!
did i lost the cell phone?
there is no jtag ou something like that ?
so now... you still want this SSPL? i'm thinking of patching one up to automatically run task 2a maybe. or just restore stock spl for warranty service if that's what you have in mind. but you didn't really reply to that offer?
Please if you could build a sspl for this condition it would be enough because once sspl i can run a new ruu with hard-spl again ! the problem i believe was caused becaus this original rom's have a spl.nb inside , in the screen we read teh information about the olipro spl but i thing teh original spl.nb messed up the hard spl!
There is another problem, i formated to fat32 my card and put a TRINIMG.nbh of a rom inside and he did nothing!! same card in elf with ELFIMG.nbh of a rom runs great!!
It means that this spl of mine will not flash from card? goldcar would help?
and cant i flash something in serial ? like a jtag or something?
Anyhelp will be more than apreciated!
sorry the bad english
Needed!
Cmonex, sorry for longtime haven't seeing this thread again. okay i really need your help btw if you willing to help me. The spl your talking about perhaps can sort out the probs (i hope) at least we tried. as for task2a cmd to clear the bad nand block is none usefull for me since usb conn. are definitely drop dead.
how about patch the SSPL to do task2a cmd to solve the bad NAND block first.
dinizbruno said:
Please if you could build a sspl for this condition it would be enough because once sspl i can run a new ruu with hard-spl again ! the problem i believe was caused becaus this original rom's have a spl.nb inside , in the screen we read teh information about the olipro spl but i thing teh original spl.nb messed up the hard spl!
There is another problem, i formated to fat32 my card and put a TRINIMG.nbh of a rom inside and he did nothing!! same card in elf with ELFIMG.nbh of a rom runs great!!
It means that this spl of mine will not flash from card? goldcar would help?
and cant i flash something in serial ? like a jtag or something?
Anyhelp will be more than apreciated!
sorry the bad english
Click to expand...
Click to collapse
no usb, no sd, no chance sorry. jtag it or get it serviced or get another phone.
as for jtag, hermes jtag has been worked out by scholbert. trinity is probably the same, but you will have to find the pins. the rest of the process will be the same.
Dear all,
I can't go to bootloader screen ..fff before I had on my trinity faman 4.03 rom and I would change with the NiAX rom... after 3% restart and I think that my phone brick and my phone stay on htc screen fff please help
I have windows vista and even if i follow all steps pfff it changes nothing...after hard reset ...fff please help ...
I think my trinity is out :-(????????????????????????
Please help,
The O.S is more important to these operations than can be stressed - for a 99% safe flash Win XP is your best bet , I have had nothing but error 260,270 halfway flashed roms and usb faults running on vista and since I had my original bricking episode - NOTHING , I repeat NOTHING including genuine roms has flashed without a recovery or at least without doing something strange in the process - SPLXPLOIT has been a saviour here , without it I would've been lost.
Cant the O.P simply use another machine to test out the USB theory ?
ALIVE AGAINnnnnnnnnnnnn!!!!!!!!
My p3600 was stucked att bootloader, and wont give "usb" and do not read TINIMG.NBH (tried on elf with ELFIMG.nbh and the card was great)!
I did a golcard with the post on elf about it and the cell with the gold card inside was the same, no trinimg.nbh and no usb.............
BUT..............
with the goldcard inside, turned OFF, i placed it on the usb cable off the pc and the device booted to the bootloader screen, but this time he got "USB" , before flashing anything i removed the card , and putted switched off in the usb, booted with "serial" with card and pressing power and then placing usb still "serial" message!
I putted the card, did not switched on , placed on the usb and waited for it to boot for it self , and for my surprise "usb".
Flashed stock rom, and it booted nice!!!
Please try!
saved my day!
sidekraouf95 said:
Dear all,
I can't go to bootloader screen ..fff before I had on my trinity faman 4.03 rom and I would change with the NiAX rom... after 3% restart and I think that my phone brick and my phone stay on htc screen fff please help
I have windows vista and even if i follow all steps pfff it changes nothing...after hard reset ...fff please help ...
I think my trinity is out :-(????????????????????????
Please help,
Click to expand...
Click to collapse
I have to know how to repair my phone please... nobody can explain precisely how to put my phone on bootloader using my sd card directly from my computer under vista...???
Hi All,
As mentioned above, I ahve tried many times to Hard SPL my experia through USB cable but I dunno why it still fail (like what happened to Malik in his topic. Error connection 262). I have tried all the way that mentioned in that topic but mine still fail. Since I am able to flash UK Generic ROM through SD Card Method, Now I am wondering if xperia able to Hard SPL through that method.
Any senior member got any idea?
kmunz said:
Hi All,
As mentioned above, I ahve tried many times to Hard SPL my experia through USB cable but I dunno why it still fail (like what happened to Malik in his topic. Error connection 262). I have tried all the way that mentioned in that topic but mine still fail. Since I am able to flash UK Generic ROM through SD Card Method, Now I am wondering if xperia able to Hard SPL through that method.
Any senior member got any idea?
Click to expand...
Click to collapse
Hi,
I posted this response a few minutes ago in the Kaiser forum, it's relevant here too...
http://forum.xda-developers.com/showpost.php?p=3273438&postcount=7
Ta
Dave
I'd like to refresh this thread: can anyone quickly give an update if hardSPL can be made with SD method ? (if I rename the 0.78olinex to kovsimg.nbh for example)
this of course is needed when there's that damn problem with PC connection
przemke said:
I'd like to refresh this thread: can anyone quickly give an update if hardSPL can be made with SD method ? (if I rename the 0.78olinex to kovsimg.nbh for example)
this of course is needed when there's that damn problem with PC connection
Click to expand...
Click to collapse
I think it doesn't work. In the instruction for SD-Methode there you have to HARDSPL first... You can read it here.
__________________
Edit:
First of all before you try it, think about that, that I am not responible about any damages etc. because the instruction is not for X1 but it might help you if you really can not flash it via US
I found a thread (other mobile phone) but maybe that is working, you have to use a HSPL for X1 of cause.
You can give it a try and if it is working you can tell, so it could be added to HSPL thread.
SuperSport said:
**********************************
Alternate SD Card Method
**********************************
For those who would rather use their SD Card for this (Maybe your USB Port is not functioning). For this method, the way I'm describing, your phone must be running a version of Windows Mobile. Can be any Version, 5-7. If your phone does not currently run, flash back the OEM ROM that came with it Originally. You can find some in my signature.
Caution!!! Flashing Hard-SPL may Hard Reset your device!!!! Backup all data FIRST!!!
1. Be sure you have a, Non-SDHC, SD Memory Card.
2. Be sure the card is formatted Fat32 and Without a Label.
3. Download the attached HardSPL SD.zip file and extract it's contents. Copy both files, SSPL-TRIN.exe and TRINIMG.nbh, to the Root of your SD Card.
4. On your phone, use File Explorer to browse to the Root of your SD Card.
5. Tap the SSPL-TRIN.exe file. This should run the file.
6. On some phones, you will see a security message come up. Select 'Yes' to run the program.
7. You should now see a Grey screen with Blue Lettering. It will be asking you to Press power button. Go ahead and press the power button.
8. You will see the update progress for a short moment, it will restart, and update again, then show "Update Complete - UPDATE SUCCESS" If you see this message, it has worked.
9. Press the Reset Button with your Stylus to Restart
10. Delete the two files from your SD Card (TRINIMG.nbh, SSPL_TRIN.exe). To confirm Hard-SPL is on your device, Enter Tri Color Screen following directions above. You should see the following:
Hard SPL 1.20.Olipro
TRIN100
IPL-0.50 (your device may show IPL-1.00)
TRIN100 MFG
SPL-1.20.Olipro
CONGRATULATIONS!! You have now installed Olipro's Hard-SPL 1.20 on your device using SD Method!! Press the Reset Button with your Stylus to restart.
Click to expand...
Click to collapse
I did it!
I renamed 0.78olinex file to kovsimg.nbh, put it on formatted card and on a second or third try it started flashing the SPL. But at that time the tricolour bootloader (don't know if it mattered or was a coincidence) was started by hardspl RUU program from PC via USB (the program showed error but phone flashed - from the SD it seems)
Then I had no problem flashing ROM from SD (now my X1 switched to headphones forever but that's another problem )
Iinitially I had stock spl 0.78 I have to mention.
described it here:
http://forum.xda-developers.com/showthread.php?t=718697&page=2
Thanks for info with that method for HTC P3600. however it is for much newer 1.20olinex so I doubt it was designed for X1 ?
przemke said:
I did it!
I renamed 0.78olinex file to kovsimg.nbh, put it on formatted card and on a second or third try it started flashing the SPL. But at that time the tricolour bootloader (don't know if it mattered or was a coincidence) was started by hardspl RUU program from PC via USB (the program showed error but phone flashed - from the SD it seems)
Then I had no problem flashing ROM from SD (now my X1 switched to headphones forever but that's another problem )
Iinitially I had stock spl 0.78 I have to mention.
described it here:
http://forum.xda-developers.com/showthread.php?t=718697&page=2
Thanks for info with that method for HTC P3600. however it is for much newer 1.20olinex so I doubt it was designed for X1 ?
Click to expand...
Click to collapse
I don't know it the devices have something in common, but I thought it could help you.
The version is depending on the Devices etc. Like you know on other programs one program is called 1.2 the other 0.85 or 11.5, for that HTC P3600 it is 1.20.
The latest for X1 is 0.78
I am glad that it helped you
and hasn't bricked your device
About Headphone: I had the same problem several times, sometime it disapears after a time or I plugin in and out the headphones until it disapears (after every in/unplug wait some seconds so winmo can refresh it)
I read that there is a contact that is closed when headset is inside and is not opened when unplugged like you can see here:
opened:
| |
| |
/ |
| |
|_|
closed:
| |
| |
| |
| |
|_|
neoofoox said:
I think it doesn't work. In the instruction for SD-Methode there you have to HARDSPL first... You can read it here.
__________________
Edit:
First of all before you try it, think about that, that I am not responible about any damages etc. because the instruction is not for X1 but it might help you if you really can not flash it via US
I found a thread (other mobile phone) but maybe that is working, you have to use a HSPL for X1 of cause.
You can give it a try and if it is working you can tell, so it could be added to HSPL thread.
Click to expand...
Click to collapse
This doesnt work. When invoking the SSPL-TRIN.exe only restarts the device and nothing else.
Heres what i did:
1) grabbed RUU_Signed.nbh from X1_HardSPL_V1.
2) Replaced TRINIMG.nbh with above.
3) Run SSPL-TRIN.exe
device restarts. same version of SPL still shows when booting to tri-color screen.
(I'm not 100% sure this is the correct forum, but since it is very ROM related it didn't feel all wrong to put it in here...)
Hi guys. After som serious flashing of cooked ROMs I decided for some unknown reason that I should try to restore a stock ROM. Now, being very tired as I was, i completely forgott that its probably a good idea to flash a new Stock ROM on the unit BEFORE flashing it with a signed SPL....so I just flashed the Signed SPL to the device. That in it self seem to have gone ok, because when I start the unit it say "SPL-1.15.0000". Problem is though that it also says "Upgrade ROM error, please try again"
Now, what should I do? Have tried put both signed and unsigned SPLs on the storage card and started up via the volume down/pwr button thingy, but that does not seem to do anything. I have also tried to attach the unit to a USB port when in tricolor mode ("USB" shows up on the screen) and tried the CustomRUU program. It finds the device and starts to "upgrade" (grey screen on the device with 0%) but then it just doesnt seem to get any further...
As the device was working fine with a custom ROM before I started all this, I suspect that the main problem proably is that I now have a Standard SPL with a cooked ROM, and that they collide sort of. I, as well as the Blackstone, is now stuck and I am all out of ideas what to do? Have also tried Hard and Soft resets, but that doesnt seem to change anything.
Help!
try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps
You can try USPL on your HD and flash a custom or stock ROM with it.
PapaDocta said:
try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps
Click to expand...
Click to collapse
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).
improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success. Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
Click to expand...
Click to collapse
just do uspl it will work
improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).
Click to expand...
Click to collapse
bootloader mode is when you power off the device and hold the volume button down and press power till you get the tricolor screen...
so here is what you need to do .
1. remove the sd card
2. go into the tricolor mode connect your device to the pc and make sure it says (USB) at the bottom
3. run the stock shipped exe from you pc
if that didn't work then you should try the USPL version.. and there is a guide if you are using vista.. i just tried and worked fine.. here it is
http://forum.xda-developers.com/showpost.php?p=3331078&postcount=153
and the reason i'm asking you to remove the sd card because if you have a rom (blacimg.nbh) it won't let you do anything it will try to flash from the sd card and right now you don't want to do that.
and you shouldn't put any rom into the internal storage of the phone..
PapaDocta said:
and you shouldn't put any rom into the internal storage of the phone..
Click to expand...
Click to collapse
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?
nicelad_uk said:
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?
Click to expand...
Click to collapse
i don't think anything would happen... the file will get deleted when you flash as the rest of the files in the internal memory
Thank you everyone! The USPL thing solved it, when I did it from a XP machine! The once bricked Blackstone is not alive an kicking again!
About USPL, I saw the workaround for Vista, but downgrading a few components to make it work just doesn't seem like a safe way to do it. And I cant help but to think that it might have unwanted side affects, ie affecting system stability. But maybe I am wrong?
Going back to shipped ROM without bricking?
Hi,
After reading this thread I am now a bit worried and, as a newbie, would appreciate maybe a "simple" answer to my question.
I''ve been experimenting with various cooked ROMs after following the guide in the WIKI for installing HardSPL and then putting the ROM file (BLACKIMG.nbh) on my SD card and installing it using the power on + volume down button method.
However, I now want to revert back to the original "shipped" ROM, which I have downloaded from the list of shipped ROMs via the WIKI (I downloaded the one which closely matched what was originally on my HD - as I didn't know how to backup the actual ROM on my HD at the time).
So, my question:
How should I put the downloaded original/shipped ROM:
RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
into my HD without bricking it?! Do I just run it on my PC with ActiveSync enabled or do I need to do something to remove the HardSPL or something first?
Sorry if this has been answered previously but I get confused when a thread just makes loads of references to SPLthis and SPLthat etc.!
if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..
PapaDocta said:
if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..
Click to expand...
Click to collapse
Brilliant! Thanks for the simple answer Worked no problem!
Hi, i'm totally new to flashing phones etc. I have a tytn II and was running windows 6 on it.
I Flashed it with Hard SPL, and then downloaded TPC 23053 Titanium Ultimate. It's the one on the thread that says you don't need to flash a stock ROM first.
I flashed it and all went fine, booted up and alligned the screen etc. It then rebooted itself then loaded back up. All seemed to be ok, sound and camera wasn't working. In the fourth post of the titanium thread, it says the recommened SPL and radio.
which are Recommended SPL 3.34 Radio 1.70.18.02
So i downloaded both, flashed the SPL and then the radio. Now when i boot i get a black and white image of a tribal kind of dragon. It asked me to setup the phone again so i alligned the screen again. Sound and camera now worked.
However, i was usuing it for a while and then for some reason programs stop loading, it says something like, it's write protected or make sure you have the correct security permissions. When i plug into the pc i can't get anything off the storage card or the phone, it says permission denied.
So when i reboot the phone, it keeps asking me to setup again so i lose all my contacts that i have added etc. I can turn the phone on and off and it's fine, but then eventually does the wierd permissions and access denied thing and when i reboot always asks me to setup the phone.
Can anyone help me as to why this is doing this? I read something about CID unlock etc, is it to do with that because i didn't perform this step.
Not sure why everytime i reboot the phone it asks me to setup the phone again, sometimes it doesn't, it's usually after it stops letting me open programs.
Thanks in advance and sorry for the long post.
Maybe reflash.
You should have posted this in the thread made for the rom.
Thanks for the reply, sorry it's in the wrong place.
Can i flash back to windows 6, is this possible as titanium is 6.5 and do you know where i can find the "stock rom" for the tytn ii.
I think the problem is i didn't flash to stock rom first, but i was already running the stock rom. What was on itwhen i bought it from the shop so it's the same thing isn't it?
Obviously you must have flashed Hardspl and sim/cid unlocked your phone. Upgrade your hardspl reflash with a stock 6.1 rom from the wiki .I know it says that you don't have to flash stock first, but when flashing 6.5 roms, it is always a good to flash stock first to clean out the extended rom.
Flash a stock rom , flash ultimate, hard eset and the set up.
Thanks, i will try it now. I'm following these instructions. Do i need to do all of this including the bootloader, or just to restore the OS to step 2? Also once done do i need to reinstall HardSPL?
1. Get the original ROM for your device (HTC or ATT)
2. Flash the OEM ROM to your device (this will restore your OS but not the bootloader, we'll get to that below)
3. Copy the ROM to a temp folder and extract it, I use WinRAR, just right click on it and select "Extract to Here"
4. After extracting the ROM you should have a several files here, one called RUU_signed.nbh is the one we're looking for. Copy this file to another empty temp directory.
5. Download NBHExtract and follow the instructions in the link to extract the NB files from the ROM (essentially just copy nbhextract.exe to the temp folder where the nbh file is and run it from a command line - like so C:\temp\kitchen\>nbhextract.exe RUU_signed.nbh
6. You should now have several .nb files in that directory, the one we're interested in is the 01_SPL.nb.
7. Now you have to create an NBH file with just the SPL, to do that download htcrt (HTC Rom Tool).
8. Run the tool and under the ROM Builder tab select Kaiser, the rest on the left side doesn't matter right now. On the right side of this window click the "..." next to SPL and select the 01_SPL.nb you extracted from the OEM ROM. This should be the only thing added under Firmware Contents. Click Build ROM.
9. You should now have a NBH file that is relatively small (about 258K), copy this NBH file to a new empty directory
10. Download pof's KaiserCustomRUU.exe and put this in the same directory used in step 9. Don't run this yet.
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
13. When you have the bootloader screen on your phone run KaiserCustomRUU.exe from the folder used in step 10.
14. After it's finished verify your SPL by holding down power and camera buttons while doing a soft reset.
15. Send your device back for warranty repair or replacement.
No you don't have to do all that. That is just if you want to restore your phone for warranty return. All you have to do is go to the wiki. http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs and download a stock rom to your desktop. Connect your phone and run the RUU and follow the onscreen.
After your phone is flashed with stock, just reflash Ultimate the same way.
First however , enter bootloader , depress camera and power button while soft resetting, and check your spl, if it is still 1.0 olipro , upgrade it first to 3.29 or 3.34 using this guide. http://forum.xda-developers.com/showthread.php?t=498320
Once your phone is hardspl'd you never have to do it again
Thanks very much for your help. I have 3.29 on there at the moment, should i flash to 3.34, then flash to stock rom, and then to ultimate again.
Or flash stock rom, then 3.34 SPL and then ultimate?
Mitchsnake said:
Thanks very much for your help. I have 3.29 on there at the moment, should i flash to 3.34, then flash to stock rom, and then to ultimate again.
Or flash stock rom, then 3.34 SPL and then ultimate?
Click to expand...
Click to collapse
You can do it both ways it doesn't matter since you already have hardspl on your device and basically you are updating the current 3.29 to 3.34 to have a better performance with the ultimate rom.
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Mitchsnake said:
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Click to expand...
Click to collapse
No, it's important to remove it. How long are you leaving the battery out for? And was it over 50% charge before you removed it?
I'm assuming you followed steps 1-4 to the letter.
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
It sounds like there could be a hardware problem from all the hard resets happening there. Have you made sure that the reset button at the bottom is functioning correctly and isnt blocked by any dirt etc?
Mitchsnake said:
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Click to expand...
Click to collapse
I wouldn't complicate things that are more than clear. The intructions literally says the following: 2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*. Just follow them, probably mskip for doing this tutorial spent a lot of time "trial n error". It really won't take anytime to do this step
Yep i follow those steps. I leave the battery out for about 30 seconds as it says. But obviously it hard resets so i can't do this at all as the files aren't there when i put battery back in. I have to set up the phone again.
I suppose i could just flash the stock rom, then see if that works when i remove the battery and then i can update the SPL? soft reset isn't blocked by dirt either.
If that fails i'm stuck with a bad phone
Mitchsnake said:
Yep i follow those steps. I leave the battery out for about 30 seconds as it says. But obviously it hard resets so i can't do this at all as the files aren't there when i put battery back in. I have to set up the phone again.
I suppose i could just flash the stock rom, then see if that works when i remove the battery and then i can update the SPL? soft reset isn't blocked by dirt either.
If that fails i'm stuck with a bad phone
Click to expand...
Click to collapse
Well yeah... if you had read it all you would know that you are meant to be doing all of this using a stock rom on your device. There's your problem right there.
If you already have hard spl on your phone so you don't need to go through all the steps of flashing hardspl for the first time. Just upgrade the easy way from the SD card.
I have had 3.29 on my phone and have flashed over a hundred times with never a problem, including Ultimate several times. Just try flashing a stock rom first and then Ultimate. Then hard rest and then setup the rom. If i works great, if nt then you can always upgrade your spl later.
Stuntdouble, theres no need to be like that, some people are new to this, and if you had read my previous posts you'll see that i didn't flash to stock rom first, because i'd just got it from the shop, so the stock ROM was already on it. I didn't think i needed to flash it with the same one again first. Thanks for the help though everyone, I've now flashed stock rom, and gonna try ultimate again/
Sorry, but the amount of people on here who don't actually read FAQ's/Stickies before flashing their device don't get much sympathy from me. I think people underestimate the risks involved when flashing for the 1st time. However i've been having a bad day so I apologise for snapping.
Yeah no worries, it annoys me too when there are tutorials yet people can't be bothered and just post asking how to do something. But the only reason i didn't flash a stock ROM was because i got it from the shop so didn't think i needed too.
There is something i would like to know though that i can't find how to do. I'm trying to install 3.34 Hard SPL now, i have 3.29 at the mo. I don't have a card reader unforunatley so can't format my card to FAT32 like it says to if installing from card.
Is there an easy way to upgrade it other than using storage card? Or can i do the same steps as when i first did it. i.e, run the JumpSPL 1.56 but instead of opening the 3.29 KaiserCustomRUU, i open the 3.34 Kaisercustomruu?
I apologise if this info is anywhere, but i've read all the faqs and searched google and can't seem to find a guide on upgrading SPL from 3.29, it only tells you how to first install 3.29.
Thanks.
Off with their heads!
Ok i ran JumpSPL 1.56 and then ran the KaiserCustomRUU of the 3.34 Hard SPL, now when booting i get the dragon spaslh screen, but when i go to bootloader, it still says 1.29.
What am i doing wrong?
Fixed this now, thanks for everyones help appretiated