hey i cant wipe ext and a few other option does not work from the recovery menu....??? it gives me error like
wipe from console???please help.....
when i click repair ext it says to do it from consol when i click wipe cach it says do it basically from via console.....please help....
so do it from console? thats the simplest method to fix that...
try flashing recovery again.
okay....
well is there a site with the commands i might need.....i tried to wipe the ext with this
# mount -o rw /dev/block/mmcblk0p2 /system/sd
but does not work??
if im not mistaken, that code just remounts/mounts the ext.... what you need is found by searching "console" + "reformat". And second result later...Here.....
Try searching the forums first. good luck
okay this is what im going to do?
im going to flash my g1 to 1.6 then add on cyanogen rom 4.1.9999 okay then what is the best way to reflash my recovery imgae.....i think i might have dl the h not the g version....how can i relfash my image without messing it up please help.....
xghostyxjokerx said:
im going to flash my g1 to 1.6 then add on cyanogen rom 4.1.9999 okay then what is the best way to reflash my recovery imgae.....i think i might have dl the h not the g version....how can i relfash my image without messing it up please help.....
Click to expand...
Click to collapse
If u doing this on G1 u got a wrong recovery image there is only 2 versions 1.2.2 and 1.2.3 there is no G or H. Link is in my signature. Why would u flash if u recovery image works half add u might as well **** ur **** up, flash proper recovery image. AND READ FFS IT'S ESSENTIAL.
Ghosty you need to put your phone down and start reading for a few hours, yes hours.
Your obviously jumping into that phone knowing little to nothing about what your doing.
So unless you have the funds to buy a replacement phone, start reading.
Related
Fixed. This post can be deleted if a Mod deems it necessary.
rofl. not dissing you or anything man, i just thought that you posted this but in your sig you say "im pretty pro at android. need help? message me". sorry its ironic. but...i really dont know. you cant get into recovery? what firmware are you on as of right now? what rom are you on too?
oshizzle1991 said:
rofl. not dissing you or anything man, i just thought that you posted this but in your sig you say "im pretty pro at android. need help? message me". sorry its ironic. but...i really dont know. you cant get into recovery? what firmware are you on as of right now? what rom are you on too?
Click to expand...
Click to collapse
I didn't want to brick my phone, so I was just seeing what others said, I fixed it though. As I said, I'm pretty pro with android.. Haha, and this no service bull didn't help at all.
You said you have the new spl as in either Hard or Engineering??
If so you could use fastboot to flash cyanogen's recovery back with
fastboot flash recovery (path to your recovery image)
then you could use cyan's recovery to get back where you wanted to be
jackslim said:
You said you have the new spl as in either Hard or Engineering??
If so you could use fastboot to flash cyanogen's recovery back with
fastboot flash recovery (path to your recovery image)
then you could use cyan's recovery to get back where you wanted to be
Click to expand...
Click to collapse
I fixed the issue, but I was running HTC ADP1 1.6, with HTC's recovery image. It wouldn't let me flash cyan's ROM from recovery, or flash cyan's recovery from inside the ROM with Terminal Emulator, I was told that the permission was denied. I ended up going back to rc29, to 1.5 and then used the "One Click Root" method to flash Cyan's Recovery and restore a backup of Cyan's latest release.
Strangely, I though HTC ADP had root? Why wouldn't I have been able to SU and gain access. Well, whatever the reason, it's fixed now.
Hey, so i have a g1 and was using youtube to jailbreak it and was doing ok, and even installed cupcake fine version 1.51 by jesus freak. i didnt really notice much differnce from the stock g1 so i tried to install cyanogenmod's latest rom so i put it on the memorycard as update.zip and i also put JFv1.51 ADP.zip on the card and tried to do a reset. i pressed alt W to wipe and alt S to install the new ROM but i noticed it still says JFv1.42 on the recovery utility and when i ry to boot after the update it just hangs on the tmobile g1 screen. I cant figure out what to do and need help. thanx!
Get amon_ra 1.5.2 recovery img,
then to flash cyan's rom you need th 1.4 ota dev zip then cyans roms
do a wipe
then flash the ota, it will say reboot but dont,
press back the go to flash any zip and flash cyans rom then reboot, it will take you back to Recovery menu and wait till your able to move around then reboot phone again
Or use cyans Wiki guide to rooting and upgrading to use his rom
ANYONE? Ive read as long as i can get back to the recovery screen im ok, but weather i wipe it and just reboot or wipe and try to install the update it gives me the t mobile g1 screen. what can i do?
ilostchild said:
Get amon_ra 1.5.2 recovery img,
then to flash cyan's rom you need th 1.4 ota dev zip then cyans roms
do a wipe
then flash the ota, it will say reboot but dont,
press back the go to flash any zip and flash cyans rom then reboot, it will take you back to Recovery menu and wait till your able to move around then reboot phone again
Or use cyans Wiki guide to rooting and upgrading to use his rom
Click to expand...
Click to collapse
Hey, so even if i get the amon_ra 1.5.2 recovery img how do i get it onto the phone?
and what is the 1.4 ota dev zip? im a real noob with all this so any walk thru steps would be greatly appreciated!
takashikastl said:
ANYONE? Ive read as long as i can get back to the recovery screen im ok, but weather i wipe it and just reboot or wipe and try to install the update it gives me the t mobile g1 screen. what can i do?
Click to expand...
Click to collapse
Use Super-D or wesgarner and enom those are faster than cyan.Just wipe then reflash any of the above
sorry my fault its 1.6 ota dev zip.. my fault...
well do these steps
Copy recovery-RA-dream-v1.5.2.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
select console from the menu
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-dream-v1.5.2.img
Click to expand...
Click to collapse
or you can do it thru terminal
Copy recovery-RA-dream-v1.5.2.img to the root of your sdcard
start the terminal app
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-dream-v1.5.2.img
Click to expand...
Click to collapse
once you get that flashed you can use
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
jus read to get an idea on how.. but mainly wanna follow tese instructions
You will now install the actual OS of the phone. First you will install the legal Google apps, and then you will install CyanogenMod on top of those apps.
1. Turn your phone off.
2. Hold the Home button and "End" (power) button to boot to Recovery mode.
3. If you wish to have an option to return to your factory settings, select nandroid backup now. If not, continue.
4. Press Alt-W (or select "wipe data/factory reset")Press home to confirm
5. Press Alt-A (or select "apply any zip from sd")
* DRC83_base_defanged.zip or signed-dream-devphone...
6. Press home to confirm and let installation complete --Note that no "I have finished my job" message will appear after it finishes. Attempt to move the trackball once you see "Formatting CACHE:;" if you can see the highlight moving on the menu, it has completed the installation.
7. STOP - DO NOT REBOOT YOUR PHONE
8. Once again, press Alt-A (or select "apply any zip from sd")
* Select update-cm-4.2.x-signed.zip
9. Press home to confirm and let installation complete --Note that no "I have finished my job" message will appear after it finishes. Attempt to move the trackball once you see "Formatting CACHE:;" if you can see the highlight moving on the menu, it has completed the installation.
* If you used the Defanged DRC83, you need to manually install the ota-radio-2... just like the first two updates.
10. When this is complete, reboot your phone by pressing Home & Back.
11. Wait, your phone will display a [box] -> [phone] and say writing radio image and then reboot. This will take a couple of minutes. Be patient!
12. If the phone enters Recovery mode after rebooting, press Home & Back again to reboot it once more. You should see the blue CyanogenMod Android logo this time.
If that's all you wanted to do, you're done! You should now have a fully functional phone.
Click to expand...
Click to collapse
ilostchild said:
sorry my fault its 1.6 ota dev zip.. my fault...
well do these steps
or you can do it thru terminal
once you get that flashed you can use
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
jus read to get an idea on how.. but mainly wanna follow tese instructions
Click to expand...
Click to collapse
OK this looks like somrthing i can definatly do but how am i suppose to get something from my computer to the sd card if the phone is stuck. i dont have a card reader on my comp. only thing i have is the cable to connect the computer to the phone!
That indeed is a problem dont have a card reader at all? you can mount the sd card thro console form recovery.. but im not sure if you need adb shell or not.. also if you want a good rom you should go with dwangs rom or superD 1.2(doesnt require dangerSPL) on eve WES new y2.6 build doesnt require it either
http://www.androidspin.com/downloads.php?dir=benbuchacher/ROM/ click on SUPERD 1.2(most stable) what i am on now
http://forum.xda-developers.com/showthread.php?t=592466 Wes Garners Rom
ilostchild said:
That indeed is a problem dont have a card reader at all? you can mount the sd card thro console form recovery.. but im not sure if you need adb shell or not.. also if you want a good rom you should go with dwangs rom or superD 1.2(doesnt require dangerSPL) on eve WES new y2.6 build doesnt require it either
http://www.androidspin.com/downloads.php?dir=benbuchacher/ROM/ click on SUPERD 1.2(most stable) what i am on now
http://forum.xda-developers.com/showthread.php?t=592466 Wes Garners Rom
Click to expand...
Click to collapse
HOW DO I MOUNT IT FROM RECOVERY? i think this would solve my problem.
im on recovery JFv1.42 still.
takashikastl said:
HOW DO I MOUNT IT FROM RECOVERY? i think this would solve my problem.
im on recovery JFv1.42 still.
Click to expand...
Click to collapse
What spl do you have. If you have the Eng. or Haykuro spl, there is a way to help, if not...
on the card currently is cyan rom which even tho it says it installed doents work and i have a new recovery on it which is jfv1.51 adp.zip anyway i can get the new recovery working thru console and there by helping me restore my phone?
JAguirre1231 said:
What spl do you have. If you have the Eng. or Haykuro spl, there is a way to help, if not...
Click to expand...
Click to collapse
HOw do i find out what spl i have? i have a g1 stock that i rooted with rc29 i think, then i went up to rc 33 and then i went to cupcake 1.51 i also did a radio update for cupcake
OK so i pressed on button with camera and found it says
drea100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO 2.22.19.261
OCT 20 2008
takashikastl said:
HOw do i find out what spl i have? i have a g1 stock that i rooted with rc29 i think, then i went up to rc 33 and then i went to cupcake 1.51 i also did a radio update for cupcake
Click to expand...
Click to collapse
So you never once flashed the hard spl? Would you boot with power+camera and tell us what you see there?
JAguirre1231 said:
So you never once flashed the hard spl? Would you boot with power+camera and tell us what you see there?
Click to expand...
Click to collapse
OK so i pressed on button with camera and found it says
drea100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO 2.22.19.261
OCT 20 2008
You have the HardSPL, you can do it the other way as JAguirre1231 said but i do not know how to do this so would go with his route
here is how to get sdcard (mass storage mounted)
http://forum.xda-developers.com/showpost.php?p=4041756&postcount=1
but go other way be much simpler
takashikastl said:
OK so i pressed on button with camera and found it says
drea100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO 2.22.19.261
OCT 20 2008
Click to expand...
Click to collapse
You have the hard spl. Well it looks like your going to need a new sdcard reader...
ilostchild said:
You have the HardSPL, you can do it the other way as JAguirre1231 said but i do not know how to do this so would go with his route
here is how to get sdcard (mass storage mounted)
http://forum.xda-developers.com/showpost.php?p=4041756&postcount=1
but go other way be much simpler
Click to expand...
Click to collapse
Wrong information on my part, edited out my previous text
JAguirre1231 said:
My way won't work, he does not have a fastboot enabled spl...
Click to expand...
Click to collapse
WOW AWSOME!!! NOw im connected to my SD card. So since your the ****ING MAN with the answers what should i download and install to get the best rom out there.
takashikastl said:
WOW AWSOME!!! NOw im connected to my SD card. So since your the ****ING MAN with the answers what should i download and install to get the best rom out there.
Click to expand...
Click to collapse
Just use cyan or wesgarners or superd or dwang. Any donut should be fine (I'm using wesgarner's).
BTW, I read that with sarcasm (as I read all posts with) and I totally took that as an insult.
JAguirre1231 said:
My way won't work, he does not have a fastboot enabled spl...
Click to expand...
Click to collapse
HARDSPL is fastboot enabled
http://forum.xda-developers.com/showpost.php?p=3007992&postcount=1
its the same as engineer just with this its region free
only Stock SPL doesnt have FASTBOOT capabilities
@takashikastl
That did sounded kinda bad, But if really are jus follow instructions from the wiki and the new recovery dirctions
okay i had a rooted nexus one with recovery 1.7.0.1 cyan and running the froyo rom now i used the passion to go back and it wipe all and brought me back to 2.1 stock no super user privilege and my recovery is gone too now i cant even put the recovery on i used the superboot to add the superuser and i guess it work because i now have that on my phone please anyone help??? im running 2.1 ere 79???
ok i went back to stock again then update to 2.1 update 1 now i put in the super user on it now what guys??? i try to flash but cannot locate the damn image??
i placed in the image and get cannot load error??? please somone help??
im on terminal and dont work...omg!!! flash image not found i place it on my sd card and this is what i type...
su
# flash_image recovery /sdcard/recovery.img
note i change the name shorter so i wont type long...and no good??
Problem solved
Nvm problem solved!!!
Hahahahahaha, IU have to say, it was pretty funny to see you document your path from despair to solving the poblem in the time of an hour.
Hi,
I am just wondering, i am rooting my Nexus one 2.3.3 and in the instruction it says "Also download and copy the SU program to your SD card and name it sd.zip."
My question is where do i get this file from?
Thanks.
masantula said:
Hi,
I am just wondering, i am rooting my Nexus one 2.3.3 and in the instruction it says "Also download and copy the SU program to your SD card and name it sd.zip."
My question is where do i get this file from?
Thanks.
Click to expand...
Click to collapse
Go to the "rooted" link in my signature, and take the Eclair/Froyo version
Isnt the Su file in your signature for froyo? And isnt 2.3.3 gingerbread? or it works?
Thanks.
masantula said:
Isnt the Su file in your signature for froyo? And isnt 2.3.3 gingerbread? or it works?
Thanks.
Click to expand...
Click to collapse
The file in the thread that you want is: su-2.3.6.1-ef-signed.zip It works for Eclair, Froyo and Gingerbread.
efrant said:
The file in the thread that you want is: su-2.3.6.1-ef-signed.zip It works for Eclair, Froyo and Gingerbread.
Click to expand...
Click to collapse
Great, thanks alot for the help
im also rooting but grj22 build, what do i need to download to my sd before i unlock my boot loader?
To unlock your bootloader, you don't need anything on the sdcard. To continue with rooting, you would need to have a custom recovery on your computer and use fastboot to install it after you unlock it, then flash the zip that was mentioned above (which would need to be on the sdcard) to actually root your phone from the custom recovery.
bassmadrigal said:
To unlock your bootloader, you don't need anything on the sdcard. To continue with rooting, you would need to have a custom recovery on your computer and use fastboot to install it after you unlock it, then flash the zip that was mentioned above (which would need to be on the sdcard) to actually root your phone from the custom recovery.
Click to expand...
Click to collapse
can i use adb to put the file on the sd card i tried unsuccessfully and now my phone wont boot. but i still have bootloader and fastboot, also adb devices works? ugh , such a newb but it seems all is not lost, right?
Install recovery, boot into recovery, mount the SD from recovery, then move the file over to the SD using windows...
danger-rat said:
Install recovery, boot into recovery, mount the SD from recovery, then move the file over to the SD using windows...
Click to expand...
Click to collapse
ok col, now heres the kicker...i flashed recovery-RA-nexus-v2.1.1.img as my recovery , and im pretty sure i put cryogen 7 on the sd so i fudged it up pretty good.whats the best recovery to flash i, if had gingerbread 2.3.4 which came ota au natural? also im finding the su-2.3.6.1-ef-signed.zip file either, anyone have a proper link to it?
If you're going to flash cm7 or ANY pre-rooted rom you do not need to bother with the su.zip. Just flash the rom from custom recovery.
i keep getting the no img wrong img message in fastboot when i try to hboot?
Fastboot is used to flash the custom recovery. The recovery flashes the rom.
I can't understand your post in the first place so I dont know what is your actual issue.
But read the wiki.
Sent from my Xoom using Tapatalk
yes!!! it worked i knew i was close.
albundy2010 said:
Fastboot is used to flash the custom recovery. The recovery flashes the rom.
I can't understand your post in the first place so I dont know what is your actual issue.
But read the wiki.
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
well i used my girls htc 3g slide and loaded a the file before mentioned to my sd and BLAM! im so happy i almost cried a lil bit! so excited thanks to albundy and everyone else who walked me through this and gave me helpfull tips will post photos of my success!
big al,so now i have tested a few roms didnt like cm7 to much nightly or stable but i found an 2.3.4 ota vanillia and i like it of course cause its what im used to stock basicly. Well now im having problems running my gallery or music player or camera? seems like im missing something again? is it cause im rooted> i think i rooted?hmmm uh help. thanks
nevermind got it worked out downloaded a root version and wipe wiped flashed and Blam! im back.
Hello guys,
Having a real problem....
Status 7 error. I tried everything....
Latest CWM (v6)
Every latest rom's: 10.1.4 /.1 /.6
Tryed to erase first lines of binary-script (until "mount") and nothing (it doesnt even install, with the above it would instal until give the status 7).
For what i see i donne every solution available but nothing so far. Any tips?
(srry if im doing anything wrong with the threat. i think im in the right place.)
kirloi said:
Hello guys,
Having a real problem....
Status 7 error. I tried everything....
Latest CWM (v6)
Every latest rom's: 10.1.4 /.1 /.6
Tryed to erase first lines of binary-script (until "mount") and nothing (it doesnt even install, with the above it would instal until give the status 7).
For what i see i donne every solution available but nothing so far. Any tips?
(srry if im doing anything wrong with the threat. i think im in the right place.)
Click to expand...
Click to collapse
As far I know CWM 6 isn't really stable on our ace. Better use CWM 5.
Sent from my GT-S5830 using xda app-developers app
Blackbox421 said:
As far I know CWM 6 isn't really stable on our ace. Better use CWM 5.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I used CWM 5 before... same results... that's why i put the 6... :s
kirloi said:
I used CWM 5 before... same results... that's why i put the 6... :s
Click to expand...
Click to collapse
try px recovery it helps sometimes in such situations
earlier fly on mod showed me this error and i flashed it successfully through px so give it a shot
:good::good:good luck buddy:good::good:
Backup your sdcard's data to your PC using a USB adapter then FORMAT it in FAT32 format finally DOWNLOAD again the rom.
I think your sdcard might be corrupted or the rom file you downloaded might not be downloaded correctly so the file is corrupted too.
Try it and report
Viper The Ripper said:
Backup your sdcard's data to your PC using a USB adapter then FORMAT it in FAT32 format finally DOWNLOAD again the rom.
I think your sdcard might be corrupted or the rom file you downloaded might not be downloaded correctly so the file is corrupted too.
Try it and report
Click to expand...
Click to collapse
Well i as coming here to say that i even tryed download mode, another round of diferent roms. And i tryed with the card of a friend of mine but still i get abort error or status 7.
I didnt try to format the cards though... I'll try in the coming days that have another go and do what you're saying.
(as of now i spend 6hours trying to fix my ace... i guess i'm almost giving up... and going to buy a new phone... what is a stupid thing but the phone isnt helping... and i tryed everything from the book )
Thanks. I'll report soon.
After doing the 3 usual wipes in CWM recovery
Go to Mount and storage and see if there is anything mounted like cache or sd-ext (if yes, unmount it then try flashing the ROM)
If that doesn't work try a different ROM.
Additionally, reflash CWM5 and restore your old Nandroid Backup
Report back.
Good luck...
Ashish Goyal said:
After doing the 3 usual wipes in CWM recovery
Go to Mount and storage and see if there is anything mounted like cache or sd-ext (if yes, unmount it then try flashing the ROM)
If that doesn't work try a different ROM.
Additionally, reflash CWM5 and restore your old Nandroid Backup
Report back.
Good luck...
Click to expand...
Click to collapse
So i just got back from another attempt at the restoration of my phone. Correction a friend of mine tryed to do. So he manage to put the orignial rom unrooted on the phone. But i really dont know if its working because the phone didnt leave the brick mode... :s like "what?"
So in short. The phone is unrooted and with fabric settings but is still in brick mode. But now it shows the samsung logo!!!!
kirloi said:
So i just got back from another attempt at the restoration of my phone. Correction a friend of mine tryed to do. So he manage to put the orignial rom unrooted on the phone. But i really dont know if its working because the phone didnt leave the brick mode... :s like "what?"
So in short. The phone is unrooted and with fabric settings but is still in brick mode. But now it shows the samsung logo!!!!
Click to expand...
Click to collapse
Can you boot into stock recovery mode?
Do data/factory reset and wipe cache partition then reboot your phone
reflash cwm 5
kirloi said:
Hello guys,
Having a real problem....
Status 7 error. I tried everything....
Latest CWM (v6)
Every latest rom's: 10.1.4 /.1 /.6
Tryed to erase first lines of binary-script (until "mount") and nothing (it doesnt even install, with the above it would instal until give the status 7).
For what i see i donne every solution available but nothing so far. Any tips?
(srry if im doing anything wrong with the threat. i think im in the right place.)
Click to expand...
Click to collapse
flash cwm5
Viper The Ripper said:
Can you boot into stock recovery mode?
Do data/factory reset and wipe cache partition then reboot your phone
Click to expand...
Click to collapse
I've donne that already... no use...
I'm gonna try to root the phone again and put the Cmod again.
*ill report after.