Database Develop

This can't be happening... [SOLVED]

So today i finally get the gusto mod my phone Android Dev 1. After downloading all the files and following the instructions here i can't get past the black g1 screen (#8). note i can also get the the rgb screen. thats it, but with so many different posts with similar issues, my brain is pounding. At this point if i can get beack to factory, ill live. what i'll hate is the fact that bricked my phone. i'll most likely get screamed on for not searching, but i think i may be searched out. any help would be appreciated.
thanks.
docfu.

first of all dont freak out lol. Download the dreaming.nbh or w/e file from the rooting instructions and place it at the root of the sdcard. Then get into the rgb screen (Camera + Power) and flash it. That should get you back to factory settings. If not, download the update.zip for w/e region you are in place it on your sd card. Enter recovery (Home + Power) and flash the update.

ok...so i tried the DREAMING file and it kept turning up no image found, alternatively i'm not sure what you mean by w/e region update. i ihavent come across that in my searches.

ok dreaming file did infact work. i feel better knowing that the phone isnt bricked. however after running the update when it prompts for action, i hit the trackball and i'm right back at the rgb screen..AGGGHHHH! sorry. i've been at this since 3pm this afternoon.

Chill. Don't freak. You can't just jump in and do something as soon as your read it. Read the whole thing and if you don't have the patients for this work on that before you work on this. bbreath.

I must say start by saying thanks guys. i stepped back, and actually took my [email protected]@ to bed. Rest does wonders. That said. I've accomplished the factory reset. so i back to a stock g1, and boy does it suck. As stated my phone WAS a dev 1. i've already started the upgrade process, my question at this point is where do you recommend i go from here. back to dev 1 or try one of the other roms. i've already installed the spl, and right now im stuck at the telnetd part of the root process. and this too may have me screaming by the end of the day...
any thoughts would be appreciated.

After the recovery image is installed you need to update the radio if you want to install a cupcake 1.5 ROM. You can get it here, rename 'update.zip', place on the SD card and boot in to recovery and flash. Then flash a ROM of your choice. You should be able to do that on RC 30, but I'm not sure if you need to install a rooted image first, so I'd wait for someone else's input before trying that.

I played it extra safe and used the rc29. as far as i know the proper radio is installed. i'll wait around before i do something stupid. thanks for the input tho. i'm trying to learn everything.

ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.

Future reference ^-^
In case you encounter this problem in the future, cause it can happen with flashing new roms if you skip a step:
You're only bricked if you are stuck at the G1 boot screen but can't get into recovery or fastboot, adb or anything. In cases where you can still get to other phone options to start over, rest assured your phone does still work, just need to step back and figure it out, which you did in this case with a little help ^-^ First few times doing anything to my phone, I went into panic mode a couple of times thinking I bricked until I read around and found out otherwise.
Just in case you didn't know these things, if you did, well, hope it was a nice read? ^-^

doctorfugazi said:
ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.
Click to expand...
Click to collapse
Well... if you actually purchased a dev phone it should not be sim locked.
Technically... after the rooting process, we all have dev phones with the exception of the sim lock.
So... what SPL are you using?
What ROM are you trying to install? Some roms you should consider partitioning your sdcard.
What radio do you have?
First thing is first.
Get the 1.4 recovery if you haven't done so already. 1.4 Recovery
Because this allows you to select any .zip file without having to rename it to update.zip. This saves on confusion so you don't try flashing a spl (like danger spl )before a radio (could brick your phone).
Second
You need the 1.5 radio to use cupcake. 2.22.19.26I
Third
Consider an spl. You have 4 choices. HARDSPL (Recommended), Eng SPL (what the dev phone defaults with.. skateboarding androids), the standard spl (nondev) and Danger SPL (risk bricking but worth it because you have more memory for your ROMs and can try HERO builds).
Fouth
Find your rom. NOTE: Read each post carefully! If it says you need a specific spl then get it! Otherwise it won't work. Some require the Danger SPL. If you chose a JF rom then you should be alright and don't even need to partition your card and it will work just like the OTA release. Some (such as Cyanogens 3.9.7) are experiemental and are not recommended for noobs.
Fifth (and probably the most important)
ALWAYS BACKUP WITH NANDROID!!!
In the event that you think that you've bricked your phone. I would say that there is a 90% chance that you didn't. As long as you have a nandroid backup and can get to the bootloader then you still have a phone. Just make sure the fastboot.exe file is in your sytem32 directory of your computer. Open CMD and cd to your fastboot backups saved on your computer. Simply
fastboot flash boot boot.img <enter>,
fastboot flash system system.img <enter>,
fastboot flash userdata data.img <enter>
fastboot reboot <enter>
and you should be back to where you were immediately after the point you backed up. Think of it as a system restore for Windows. It couldn't hurt to have a few backups stored.
If you have any questions or problems include information for us to read in a single post and edit as necessary.
Example:
AT&T
Cyanogen 3.9.7 Rom
Recovery 1.4
HARD SPL
Radio 2.22.19.26l
8GB class 4 sd card (7gb fat32/900mb ext3/100mb swap)
Theme version if any.
That way we know what we are working with.
Happy flashing.

rest assured i was in panic mode yesterday. but honestly the only thing i could really do was just step back for a while, meaning get some rest tackle it with a clean head. its frustrating for sure. this one guy tho who posted in the brick think tank thread...just cuz he couldnt figure things out in an hour he got pissed and started screaming waste of time this that and the other. total BI$CH! I was like whoa. I was at that point too. but Im not tryna be that guy.
Now, if could just figure out if i have to start from scratch, i just might be able to get my phone working again in time fro me to go to work tmrw morning.

So... what SPL are you using?
the hard SPL found here
What ROM are you trying to install?
Well i was trying to follow suggestion on something simple, like one of the early jesusfreke's. if i can step it up sure why not. but i'll pass on the partitioned sdcard setup for now.
actually I'll run with JesusFreke JFv1.51 US CRB43
What radio do you have?
radio number listed in my previous post.
Hey thanks by the way for taking the time out of your day to respond to this. i know u guys get your fair share of spazmiesters, so i appreciate it totally.

after doing research it seems that all the current roms require partitioning. or is that optional just for running apps to sd?

partitioning is optional of apps2sd for preformance. some like myself have three partitions, the third being for a linux swap

Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)

doctorfugazi said:
Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)
Click to expand...
Click to collapse
Okay... you have the recommended recovery and spl.
So all you need to do is get your rom and radio and store the zip files to the root of your sdcard. You don't need to rename them.
Just boot in recovery (power+home) and scroll down to:
[Alt+A] apply any zip from sd
And then you should see the zip files.
Upgrade your radio first.
Then your rom.
Another note... make sure you have a data plan once you've installed your rom. Depending on your rom version, you may not be able to sign in without one. If you can't sign in, you can't use your phone which is why most would recommend a custom rom or an adp rom.
Now... if I'm not mistaken... you do NOT have to partition your sdcard to install a rom (unless it's a HERO rom).
You may want to consider doing so however.
The advantages are that you can have virtually unlimited storage for apps and it's much easier to restore them after a wipe because they are still on your sdcard. Some apps will recognize the partitioned sdcard and automatically do all the apps2sd work for you by default. It is also recommended that you use at least a 2gb class4 card at MINIMUM. Any slower then a class 4 may result in system crashes and errors. Any less then a 2gb card is almost not worth all the effort since you'll likely be using at least a quarter of it for the apps2sd. I would suggest buying at least a 8gb class 6 card for less then $50 online. It's both fast and plenty of storage. With apps to sd, if you do need to wipe you still have all of your apps installed. A great advantage of having apps2sd.
Also... try different roms! There are DOZENS out there! Some have the htc music installed, some have myfaves, some have special cameras, etc. Don't be afraid to experiment. As long as you have a backup and can get to the bootloader (skateboarding androids) and a pc, you can't go wrong! If fact... with the 1.4 recovery you can store several different roms on your sdcard, backup your current rom, wipe, flash a new rom to try it, wipe, flash a different rom to try that one, etc. If you decide that you didn't like any of those... just restore back to your previous backup. Simple as that. No pc needed. However having a pc is handy to get logcat information if it's not booting for some reason.
Speaking of roms not booting... while your experimenting with various roms... you MUST have patience. Sometimes (based on my personal experience with about 10+ different roms) they can take up to 15 minutes to boot up. You can literally be staring at the ANDROID or HTC logo this entire time. Unless you are using ddms.bat or adb shell logcat, you will be clueless of whats going on. DO NOT do anything unless you get the infamous "boot loop". This will be obvious. It will stick at the ANDROID or HTC screen for a while and then blink and go back to the logo. If you see it blink and go back to the logo then try pressing power + talk + menu to restart it and then immediately press the home button to bo back to recovery. Wipe... try again. This time it should work. If it doesn't then restore your backup while you research on that partitcular rom. You may have skipped a step or not have the proper requirements (partitioned card, spl, etc).
With all of that said... good luck and you'll be posting help to other users like yourself before you know it.

Hey Doc, if I'm not mistaken (other guys correct me if I'm wrong), if all, and I mean ALL you have is a boot loader (AKA SPL. ie// skating androids or colored bars) you need to reflash dreaimg.nbh to get a system back.
This ALSO flashes your SPL and RADIO back to default so reflash your radio and SPL afterward. (IN THAT ORDER I HOPE)

Binary100100 is a gentleman and a scholar
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.

innerspace said:
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.
Click to expand...
Click to collapse
Thank you! I do what I can.

help!!!! i searched for hours and cant fix it

my phone is stuck in a reload state i put jac xreroskiv rom or what ever its called and its stuck it starts up but keep saying hero over and over any ideas. help please thanks in advance i had already installed hero and such was just trying this new rom. i tried other roms too but no dice. even the original hero rom i originally put on here.

You should probably make a post for help in the rom's forum that you're having problems with.
Also, it would help if you told them which G1 device you had, what radio/spl and stuff like that.
But with really no info from your post the only things I can think of is that you need to do wipe or reformat your sd card.

Most likely you just have to repart your ext partition. But more info would help.

i have radio-2.22.19.261 hboot-1.33.2005 dream32b i was able to restore it but now i cant install the rom . i tried again and got the same problem so i probably got the wrong radio for the rom i want which is this one http://forum.xda-developers.com/showthread.php?t=534479\

You have the right radio. Really there is only one radio. There's the 26I that we use and the old radio that is not used anymore. Do not flash the hero radio or you will brick your phone. Did you repartion your sd card so it's fresh?

yeah i used the home and end button and did the partition using the boot loader thingy. i ended the loop but now its like i bough the phone new with root make sense?

mad82109 said:
yeah i used the home and end button and did the partition using the boot loader thingy. i ended the loop but now its like i bough the phone new with root make sense?
Click to expand...
Click to collapse
Not the least amount of sense to me, but if your phone is working ,then good. You had a bootloop which is usually solved by wiping your ext3 and phone.

maybe i have the wrong build? i had some ra build cant remember what it was called i reflashed to cyanogen 1.4 gonna try it when i get home

mad82109 said:
maybe i have the wrong build? i had some ra build cant remember what it was called i reflashed to cyanogen 1.4 gonna try it when i get home
Click to expand...
Click to collapse
all you had to do was wipe ext3, you should do this when changing any hero build unless otherwise noted. be sure you are wiping the intern. memory as well ALT+W in ReCon. also, repair ext filesystems and flash again, hero roms take a while to boot so make sure you are patient.

okay ill try when i get off work. i have 1.33.2005
2.22.19.26I my build is cyanogen + jf 1.4 can i install the rom i discussed earlier using the method u talked about? it was slow when i installed it earlier anyway of making it faster kept loading.

i fixed it dont know how lol but i did. i think i just had the wrong build. close thread plz. thanks for all the help people.

mad82109 said:
i fixed it dont know how lol but i did. i think i just had the wrong build. close thread plz. thanks for all the help people.
Click to expand...
Click to collapse
I kept seeing you say you were trying to flash the cyanogen build 1.4. That is not a rom but the recovery. But glad its working now. Put [SOLVED] on your thread title.

Need help with installing rom coming from root

I just rooted my g1 and i'm having problems trying to install cms rom.
some info;
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-2.22.19.26I
Oct 20 2008
I installed cm's recover 1.4 img and have access to the recovery screen no problem.
Tired installing AP1.6 but can't confirm it got installed.
I did this..
wipe
flashed signed-dream_devphone_userdebug-ota-14721
wipe
flashed cm 4.2.7.1
goes to the T-mobile screen, then it loads up cm's boot screen then after where it should take me to the setup screen, it turns gray/black and stays there.
please give me some imput on what i'm doing wrong.
Thanks!

You wipe, then you flash the ota update. Reboot and it will go back into recovery by itself. from there you install cm, without wiping. Reboot and you are good.

Ok i've done just that.
wiped
flashed ota, it goes back to recovery image
i flash cm 4.2.7.1
reboot and it does the same thing.
t-mo logo loads up. then cm's android bootscreen loads up.
then it goes gray/black and stays there.
i know im doing something wrong but not sure what... should i install a older cm rom first? since i'm coming from a fresh rooted g1? i was coming from rc29

RegulatorG1 said:
Ok i've done just that.
wiped
flashed ota, it goes back to recovery image
i flash cm 4.2.7.1
reboot and it does the same thing.
t-mo logo loads up. then cm's android bootscreen loads up.
then it goes gray/black and stays there.
i know im doing something wrong but not sure what... should i install a older cm rom first? since i'm coming from a fresh rooted g1? i was coming from rc29
Click to expand...
Click to collapse
it shouldn't make a difference. how much time did you wait? It could take up to 15 minutes for the first initial boot.

i've waited about 10mins. but even if it goes to the gray/black screen i should wait for it longer?
gonna redo this again and wait for a longer time. 20mins max and see where it goes from there.

Upgrade to amon_ra recovery 1.5
Then do this
Wipe
install ADP 1.6
flash cm rom right after flashing ADP without reboot
now reboot and it will go back to recovery mode
now reboot once again and wait my friend

I'm still waiting for about 20mins to see if it reboots good.
If not then i'll be doing the new amon_ra recovery 1.5 way.
should i install a older cm rom if coming from bare root?
or it doesn't matter if i'm flashing 1.6?

you might want to consider upgrading your spl while you're at it. Just a thought. I don't think it's necessary for running Cyanogen, but it'd be nice to have in case you ever want to run a hero rom to upgrade to the danger spl

where can i get the spl? I dont wanna install the danger one since I wont be installing hero on it. I just wanna run cm roms.

no luck still. but have another dumb question for you folks.
the spl i have is this. .. HSPL10.95.3000
is this ok to run cm or should i upgrade it? i know that there is a spl that is used to run hero roms but i'm not gonna be doing that so I thought that maybe there might be another spl out there that is a upgrade from the one i have?
gonna go search the forums for this btw. I dont wanna be a pain about this.

RegulatorG1 said:
no luck still. but have another dumb question for you folks.
the spl i have is this. .. HSPL10.95.3000
is this ok to run cm or should i upgrade it? i know that there is a spl that is used to run hero roms but i'm not gonna be doing that so I thought that maybe there might be another spl out there that is a upgrade from the one i have?
gonna go search the forums for this btw. I dont wanna be a pain about this.
Click to expand...
Click to collapse
I was wondering if it was your spl that could be preventing the rom to boot up. If you don't want to flash the danger spl, you can flash another one, like the HardSPL. I'm sure if you look in one of the sticky's or locked threads at the top of the forums in development you will probably be able to find a download link. It's worth a shot. Since you already have the latest radio, there is no reason to worry about upgrading the radio.

i was checking the forums and i have the hard spl.
or at least this says is the hard one. goes something like this..
hardspl =VER: HSPL10.95.3000
then
Engineering SPL=VER: HBOOT-0.95.3000
and last
G1 Original SPL=VER: HBOOT-0.95.0000
still no luck with installing cm's rom.. gonna look some more.
thanks for all the help guys! please if you think of something else let me know.

ok can't figure this crap out. gonna go bald lol
did a restore on my recovery and i'm back to this.
Model number: Android Dev Phone 1
Firmware version: 1.6
Baseband version: 62.50s.20.1H_2.22.19.26I
Kerner version: 2.6.29-00479-g3c7df37
[email protected] #19
Build number: dream_devphone-userdebug 1.6 DRC83 14721 test-keys
It does show the 1.6ADP
but what the hell lmao. I can't install cm though.
Not gonna touch the g1 right now till hopefully some of you can tell me how or what to do to upgrade my rom to hopefully cm4.2.7.1.
Again i'm really sorry for being soo needy.

oh crap. I think i lost root access again >_< crap
what's the best way to check to see if i still have root?
turned off phone and tried going into recovery but now it just shows the triangle ! and the phone pic. guess root is gone???

The newer Spl rearranges how mem is allocated so more is given to system partition on phone which allows larger roms to be installed(heros).Any SpL is fine for cyanogen/enom/dwang roms.

RegulatorG1 said:
oh crap. I think i lost root access again >_< crap
what's the best way to check to see if i still have root?
turned off phone and tried going into recovery but now it just shows the triangle ! and the phone pic. guess root is gone???
Click to expand...
Click to collapse
The triangle means root is no longer with you,young one.

ok, gonna root it again. i can get it to rc29 no problem but that's where the entire thing went wrong. will post later. wish me luck

ok rooted my g1 once again. gonna install the 1.4 recovery image now.
ok installed 1.4 recovery, now performing a backup for this point.
I think I have a old cm rom around somewhere.. .. its a 3.9.5cm should i update radio first then install this or visa versa?
+ok, installed 1.4 and flashed new radio. now gonna do what your saying and see where it goes. performing backups at each point >< lol
-ok i went to recovery and flashed the new radio and it's still formating cache... its been like 5mins already. should i reboot or wait longer?
i'm still needing to install the 1.6ADP and the rom still.

Don't reboot between the 2 zip files.
Boot to recovery
do a wipe
wipe it again for good measure
install from zip signed dev dream zip
install from zip Cyanogenmod 4.2.7.1
reboot
It will tell you it is writing radio then actually reboot
It will reboot to recovery mode
where it will tell you its writing cache...
wait till it offers reboot option again
Reboot
you shoul dget the G1 screen, than the cyanogen screen...
yes it might take a while on the second screen...I have never had it hang more than about 8 minutes.
Then you should be operational.
I do have a reoccuring issue with poor response after the initial boot to the desktop.
I usually just wait for it to stop all the background shuffling and then it smooths out.
YMMV

ok this is where i am so far...
have root
have hardspl
have recovery 1.4
have Radio Update 2.2.19.26I
now i'm gonna perform backup and do what you just said. hopefully since i did everything brand new there will be no issues.

Stuck at G1 Screening

Ok so lets start out by saying i know i am not bricked because i am able to get into fastboot as well as recovery. So this all started when i tried to move to CyanogenMod v4.2.13 . At 1st i was on Cyanongen 4.2.10 which i was having some problems on so i wanted to move to a new rom. I then went to flash xROM Eclair-v1.0 which went ok but then i started to get FCs and wanted to go back to Cyanogen roms. I then flashed the 4.2.13 rom and i am where i am not. Every time i have tried to re flash the the rom i have done a full wipe of both the phone and the EXT, but i get stuck on the G1 screen every time no matter what. I have let it seat there for 30 mins with no luck at all. Not sure what to try now. Any ideas would be great.
Here is what i am running right now.
Fastboot reads
Dream PVT 32B ENG S-Off
Hboot-1.33.2005
Radio-2.22.19.26I
I am running the RA recovery RA-Dream-v1.5.1
Any help would be great thanks.

Have you tried to downgrade with dream.nhg and reroot ? I'm sure therebis better method then this too I'm jus throwing idea out there would wait for this and some one with more experince to help out.
Also did you flash the 1.6 ota before cyan rom, just trying make it clear for future questions.. Also try a different rom suggest trying superd 1.2 it's super fast and very stable

No don't downgrade using dream.nbh it will downgrade the radio and kill your phone!
You already have the DangerSPL installed, so you can't downgrade the radio anymore.
Just try to flash a ROM which was made for the DangerSPL (also called DeathSPL, HaykuroSPL etc.)

Same problem-FREAKING OUT
Hi,
I think I have the same problem and I think my phone is bricked. A long time ago I changed the two splash screen pictures and not I can't event get past the first 1. I'm stuck at the first splash screen.
I just learned that everytime you want to flash cyan, you have to flash the radio 1.6, wipe then falsh the cyan rom. I think I did some mis steps and effed it up. PLEASE HELP.
I think I have the Danger SPL that sats Dream PVT 32B ENG S-Off, HBOOT 1.33.2005 (DREA10000), CPLD_4, Radio 2.22.19.26I, Apr 20 2009,15:30:43. I have JF 1.42 recovery and been trying to update to Cm recovery1.4 but have had no luck because of these problems.
How do you flash a rom from the SPL screen with the three android on skateboards. I just need to figure this out please.
IS MY PHONE DEAD?

hbguy said:
Hi,
I think I have the same problem and I think my phone is bricked. A long time ago I changed the two splash screen pictures and not I can't event get past the first 1. I'm stuck at the first splash screen.
I just learned that everytime you want to flash cyan, you have to flash the radio 1.6, wipe then falsh the cyan rom. I think I did some mis steps and effed it up. PLEASE HELP.
Click to expand...
Click to collapse
Where did you read that... It's not true.
And no - your phone is most likely not "dead."

oh phew! what should I do now tho? I just hit camera and power and then hit back and reset the device by pushing send and that worked but now it won't start again.
Should I wipe and try the same spl thing again?

x2phantom said:
No don't downgrade using dream.nbh it will downgrade the radio and kill your phone!
You already have the DangerSPL installed, so you can't downgrade the radio anymore.
Just try to flash a ROM which was made for the DangerSPL (also called DeathSPL, HaykuroSPL etc.)
Click to expand...
Click to collapse
Wow thanks for saying thatt I did not see that danger spl was flashed! Good catch! So yes don't downgrade! I'm sure you can flash orinial spl again too..
What you can try is super d 1.6 that requires "danger spl"

how do we go about getting a super d 1.6? what is that?

hbguy said:
oh phew! what should I do now tho? I just hit camera and power and then hit back and reset the device by pushing send and that worked but now it won't start again.
Should I wipe and try the same spl thing again?
Click to expand...
Click to collapse
To access recovery, hold Home + Power.
If you have a ROM on your SD card (the root), flash it (ALT + S i think it is.) If your ROM requires a wipe, ALT + W wipes.
Make sure you have the right Radio + SPL for whatever ROM you run.

JGo to the develop forums and look for super d 1.6 rom.. and flash it like any other rom.. wipe factory reset then flash any zip it requires danger spl so should for those that have it.. like said its really good and pretty well stable and blazing fast
http://forum.xda-developers.com/showthread.php?t=613809

Oh i had a question,
when i take my sd card out and then go to the spl and reset the device, it worked. does that mean that there is something wrong with my sd card? If so do you know where there are instructions to reformat it?

hbguy said:
Oh i had a question,
when i take my sd card out and then go to the spl and reset the device, it worked. does that mean that there is something wrong with my sd card? If so do you know where there are instructions to reformat it?
Click to expand...
Click to collapse
So you get passed the G1 screen? If you have a extra sd card that's not partation use that to flash your rom(make sure it'd formated to fat32) then when you get into a rom put your partation sd back in then go to settings and format sd card there then go into recovery Amon ra and repartation sd.. Jus a suggestion too you can reformat within recovery too I jus don't kno the commands

Well what i have been trying is to get 4.2.8 back since that has been the best rom i think Cyanogen has had out, but that doesn't even work when it has always been my backup rom. Well I am about to try Super D 1.6 will report back after it.
Edit: Well SuperD 1.6 flashed good and is running but why is it that no mater how many times i try i can't get CyanogenMod to flash ok when i was able to do it before.

Ooo I liked cyan roms but notice some lags after awhile use superd is great and well worth trying it

I figured it OUT! I think my sd card was courrupted or something because it wouldn't boot with the card in but when I took it out and booted using the Danger SPL like I described a few posts back, it worked and got past the first boot screen.
Then I flash cm_recovery_1.4.img but leaving it on the sd and reinserting the sd card when the phone booted. (Oh and I flashed cm 4.2.9.1 because I heard its the most stable)
Next I reformated my sdcard and then partitioned it using the following instructions from this thread: http://forum.xda-developers.com/showthread.php?t=534714&highlight=partition+sd
Hope this helps anyone who has same problem. THANK YOU ILOST! Is yours working now too?

Forget the thread all is well again with Cyanogen Roms working. Turns out my SD card needed to be repartitioned but since i was at school all day. I wasn't able to get on a PC and download the ROM. Wonder why the card needed to be repartitioned, but whatever it works now thanks for taking the time to read the thread.

just flash the base rom then flash cyanogen!!!! or flash dwang!!!!!

Nice to hear PROD, I think you had the same problem that I had.
OKAY, now since I've been reflashing like crazy and lost ALL my old apps and imformation since I was using JF 1.5 before.
However, I backed up on nandroid before all this craze, does anyone know how to replace certain files like password safe or shipping list apps and daat on a new nandroid backup so then essentially all my old information can be on this new platform???

Well glad to see both you got working again! Congrats! Hope all will stat well I had this same problem continously. And I believe it's due to cheap / low class sdcards.. Usually when I flash from a different rom and I need to wipe, usually backup what's on sd and apps using titanium backup then format sdcard within phone the flash new rom after I repart it

Congrats to you ilost, you got this thread going well.
I used my backup but when I use that or nandroid then it replaces my recovery back to the old JF recovery and then I'm back at square one so I'm looking for a way to replace or insert certain old nandroid files into a new nandroid file.

[Q] Stuck on G1 screen no matter what rom. Im not a noob so this shouldnt happen!

So Im trying to root my grandpas G1 and everything went well I got it rooted and unlocked without a sim card and then I flashed ra 1.7.0 and no matter what rom I flash it just gets stuck at the G1 screen and stays there forever... Its almost like it doesnt really have root and isnt flashing right. Any ideas?

mindstormmaster1 said:
So Im trying to root my grandpas G1 and everything went well I got it rooted and unlocked without a sim card and then I flashed ra 1.7.0 and no matter what rom I flash it just gets stuck at the G1 screen and stays there forever... Its almost like it doesnt really have root and isnt flashing right. Any ideas?
Click to expand...
Click to collapse
follow the cyanogen's root guides (if u r not sure either it's rooted OR not)
try some neutral (sort of) ROM which don't have requirements of OLD/NEW radio SPL etc, i.e. FroyoForTrout (F4T), if you get it running then you're good otherwise go back to Fresh thing (Android 1.0) & Telnet & commands & fresh HOT rom
Best of luck