Related
Hey everyone!
Read lots of threads here on the xda-developers forum, many questions, many answers, lots of "good guys" who are willing and able to help (many have helped me, thank you goes to them and all the others).
The bottom line:
Saw many many questions concerning flashing, bad flashes, error messages and so on.
I really don't know WHY people won't go for the easy way?
Flashing from a PC involves a USB connection through Activesync/WMDC, an application, we all know the procedure thanks to racerx_ (http://trinityguides.info). There are so many things that can go wrong: think about it, from unplugging the device, app error, comm error, power drop, connection drop, system hang and so on.
I don't know about the rest of you but I have done it the hard way but also learned to do it the easy/safe way. There's nothing more to the story than flashing from SD card. Procedure is well described in the Wiki (http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing).
I mean, all you have to do is press three buttons and wait for the flash, no risky connection drops, error messages, driver incompatibilites (see Vista problems), no app hangs.
I have tried many ROMs from over here and except for my first two flashes (first was Des' Crash Proof SPL, second was a cooked ROM) I've made them all using the SD card method and never got an error nor a situation with it.
So here's the question: why won't people flash the easy way?
well, have you actualy tried this procedure before posting this?
banesi said:
well, have you actualy tried this procedure before posting this?
Click to expand...
Click to collapse
Read my post once again, carefully.
hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.
banesi said:
hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.
Click to expand...
Click to collapse
Follow the steps carefully.
1. SD card with FAT32 and no label (it can contain other files, no need to wipe it)
2. Renamed nbh file to TRINIMG.nbh placed on SD card root
3. Power+Camera+Reset
4. Follow instructions on screen (Power button to brgin flash and Soft reset when prompted at the end).
It don't get any easier!
It SHOULD work.
Totally agree, I don't understand why ppl persist with the multitude of errors that crop up from flashing via active sync.
Using the SD card you can chuck a few ROMs on board to test and just rename each in turn to TRINIMG.nbh, move it to the SD root and enter boot loader.
Before I test a new ROM I make a static settings image with SPB Backup so I can flash back to the old ROM and restore back to how it was in a jiffy.
Just to point out for some ppl, some of the ROMs here are packaged into EXEs, you will need to extract the contents and only use the file named RUU_signed.nbh.
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Good thread
P3600i saga continues
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?
remofo said:
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?
Click to expand...
Click to collapse
No, sorry, it's not the way.
Flashing from SD card is not a workaround for bypassing SPL.
You still have to have some kind of a Hard SPL installed.
Please check the Wiki.
evojulz said:
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Click to expand...
Click to collapse
...and also bootscreens.
In other words, this method can flash any nbh file which could be flashed through the update utility method.
Easy and reliable
Fully agree with you tnyynt!
I always flash using the SD method.
Sometimes I even download the new nbh and keep it on the SD and upgrade later on when having time, not connected to a Pc... (I also have all the cab I need on my SD card).
Quick, easy and reliable (done many times).
Would be fine if the nbh would be released on this forum (rather than the .exe package).
Would allow to download them directly from the Trinity. i.e.: no more need for a Pc !!!
I always use this method, it is the only one that works for me and it's the most convenient I think.
I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(
Speed
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)
Sure SD is faster
g77 said:
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)
Click to expand...
Click to collapse
I flashed recently FinixNOver 3.0.2 (BTW - superb ROM) - only OS + splashscreens and it took 2.5 mins in SD (regular 2GB miniSD SANDISK). I think it is fast enough...
Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?
jukkus said:
I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(
Click to expand...
Click to collapse
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.
manos_23 said:
Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?
Click to expand...
Click to collapse
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..
racerx_ said:
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..
Click to expand...
Click to collapse
Ok, and thank's you very much!
ctrlaltdel said:
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.
Click to expand...
Click to collapse
Interesting, I'm sure someone will shoot me down but I'm not convinced it works with all SDHC cards... is your 4GB SDHC?
I can't get it to recognise the NBH from my 8GB but I have flashed many times successfully from my 2GB. Not to bothered, as long as it works
Nope, I'm using 2Gb normal sd-card. Also tried 512Mb card.
DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!
Anyone can please help?
Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave
ok im going to start off by saying...im young at this thing...anyway the other day i wantd 6.5 on my htc8900...i got the rom onthe sdcard but im stuck at the screen?!?!?! n i really really just want to figure this out...some1 please!!!
ok so what all did you do, we need more info then you provided.
basically i was searching how to get this beta on my tilt...so i came across this 1 guy from here and he gave me a list of links to follow..."FIRST READ THE
WIKI
HARD SPL
SUPER CID
THEN FLASH via sd card or usb"
exact words....then i did all those things...n everytime i do that bootloader reset it states "KAIS1*0
SPL-3.56.0000
CPLD-8"<---red bar
nothing in green...and nothing in blue, and @ the bottom it say serial.
AND it stays there forever...i can softreset and go back to my normal state but i want beta please help me seniors
just need step-by-step for 6.5 email->[email protected]
6.5 is no different then 6.0 or 6.1, it's what you use that matters.
Which 6.5 ROM are you using, there are several out there already?
Is this not setp by step enough for you?
http://forum.xda-developers.com/showthread.php?t=433835
ok i did read that... and did it but im tryin to put this on my htc http://anryl.freeforums.org/21232-public-releases-links-requests-t29.html#p261
but what?
Follow the instructions and it will be done.
From Mskips post
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Kaiser Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to KAISIMG.nbh
4. Copy the KAISIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
7. You will first see a tri-color screen with the phone and SPL Information at the top
8. A message will then pop up asking you to press the Power button to start the update
9. Press power button to start flashing
10. Once phone finishes flashing and says Update Complete, reset with the stylus
11. When it gets to the screen where it configures the stylus, HARD RESET
(press left and right softkey buttons on the front and hold in reset with stylus until message appears)
12. When prompted, Press "Send Button" (Green Call Button on Front) to Clear Data
13. When prompted, Press "Send Button" (Green Call Button on Front) to Restart Phone
14. Follow onscreen instructions to set up your New Rom
Click to expand...
Click to collapse
IBTiltin325 said:
basically i was searching how to get this beta on my tilt...so i came across this 1 guy from here and he gave me a list of links to follow..."FIRST READ THE
WIKI
HARD SPL
SUPER CID
THEN FLASH via sd card or usb"
exact words....then i did all those things...n everytime i do that bootloader reset it states "KAIS1*0
SPL-3.56.0000
CPLD-8"<---red bar
nothing in green...and nothing in blue, and @ the bottom it say serial.
AND it stays there forever...i can softreset and go back to my normal state but i want beta please help me seniors
Click to expand...
Click to collapse
You still have the stock AT$T spl on your phone. So obviously you did not follow the steps in the guide. If you followed all of mskips steps, you would have Hardspl on your phone.
Re-read and follow all the steps carefully in mskips guide. Do not mess around with things that you do not understand or you will have a very expensive door stop on your hands.
@Chumley, is that a custom rom I see on your phone ? I thought you were the last bastion of the stock rom. What happened ? And 6.5 no less.
Oh no, I flashed this baby the first week I had it. I ran duttys last rom for about a year though.
haha look everyone...after i opened my eyes n started to read then i got it....THANKS TO ALL SENIORS...4real what ya do is something sick...and ya good at it...ohhh last question though...is there any other 65 roms like recent?
thanxs again...
IBTiltin325 said:
haha look everyone...after i opened my eyes n started to read then i got it....THANKS TO ALL SENIORS...4real what ya do is something sick...and ya good at it...ohhh last question though...is there any other 65 roms like recent?
thanxs again...
Click to expand...
Click to collapse
Go in to rom development and look around, even though I don't care for 6.5 , I have flashed 6.5 roms by Josh , anyrl, abusalza, and support. Chumley is currently using one by chinhe. They are all great, try each one and keep the one you like best.
im guessing....7 is out of the question...or im too early for class?
IBTiltin325 said:
im guessing....7 is out of the question...or im too early for class?
Click to expand...
Click to collapse
LOL ....too early for class, come back @ spring 2010
Hello,
Today I reflash my HTC Touch HD (the first official ROM from December 2008). First I made HardSPL unlock and then changed the ROM (http://forum.xda-developers.com/showthread.php?t=555137).
Since then, the words smart mobility on the first screen changes color after 10 seconds (maybe one color from RGB disappears). But if I press the buttom on the top twice, the color is ok. In this state the text and images are absolutely unreadable. In fact, I would not mind this flaw, but it makes another mistake. When I tap on something, so very often happens that stops working touch layer. I recognised that, because hardware buttom volume up/down works, display indicate loudness, but taping on screen doesn't work. Sometimes after a few tens of seconds it makes better, sometimes helps only software restart.
Before I recognised, that the problem is probably permanent, so I reflash ROM http://forum.xda-developers.com/showthread.php?t=542104 and then http://forum.xda-developers.com/showthread.php?t=547278
Then I tried to save my device by official ROM (_HTC Touch HD_MR_2009_RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe), from this site: http://www.htc.com/europe/SupportDownload.aspx?p_id=179&cat=2&dl_id=533 and using this code HT849KD07000
Finally, I did SPL Stock.
But the problem is worse and dosn't work gsm module.
Once it shows this message: A problem has occurred with gwes.exe. and if I want to send to microsoft ...
Please hepl me. :-(
Thanks a lot.
I had the same problem
First flash HSPL 1.56 and your colours will still look funny
then flash a new ROM and your colours and everything else will be fine
welcome to the club
USPL the Best flashing tool
Si1m said:
Hello,
Today I reflash my HTC Touch HD (the first official ROM from December 2008). First I made HardSPL unlock and then changed the ROM (http://forum.xda-developers.com/showthread.php?t=555137).
Since then, the words smart mobility on the first screen changes color after 10 seconds (maybe one color from RGB disappears). But if I press the buttom on the top twice, the color is ok. In this state the text and images are absolutely unreadable. In fact, I would not mind this flaw, but it makes another mistake. When I tap on something, so very often happens that stops working touch layer. I recognised that, because hardware buttom volume up/down works, display indicate loudness, but taping on screen doesn't work. Sometimes after a few tens of seconds it makes better, sometimes helps only software restart.
Before I recognised, that the problem is probably permanent, so I reflash ROM http://forum.xda-developers.com/showthread.php?t=542104 and then http://forum.xda-developers.com/showthread.php?t=547278
Then I tried to save my device by official ROM (_HTC Touch HD_MR_2009_RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe), from this site: http://www.htc.com/europe/SupportDownload.aspx?p_id=179&cat=2&dl_id=533 and using this code HT849KD07000
Finally, I did SPL Stock.
But the problem is worse and dosn't work gsm module.
Once it shows this message: A problem has occurred with gwes.exe. and if I want to send to microsoft ...
Please hepl me. :-(
Thanks a lot.
Click to expand...
Click to collapse
Lyptherion said:
First flash HSPL 1.56 and your colours will still look funny
then flash a new ROM and your colours and everything else will be fine
welcome to the club
Click to expand...
Click to collapse
i highly recommend you use USPL : I still yet have to see someone who had a problem after using USPL. This is even endorsed by Dutty Throy - Moderator ROM Cooker par excellence!
look here
http://forum.xda-developers.com/showthread.php?t=505377
and here
http://forum.xda-developers.com/showthread.php?t=462347
format your sd card using fat32 (full format) (if you are a frequent flasher I suggest you get a small capacity sd card – 1Gb - and devote this only for flashing)
rename the RUU_signed.nbh to BLACIMG.nbh and pair this with ROMUpdateUtility -(application file). copy this two files in you formatted sd card.
then using Digital Outcast's USPL GUI: look here
http://forum.xda-developers.com/showthread.php?t=508361
flash the ROM.
please let me know once you've done this succesfully, i wish you the best of luck!
Lyptherion said:
First flash HSPL 1.56 and your colours will still look funny
then flash a new ROM and your colours and everything else will be fine
welcome to the club
Click to expand...
Click to collapse
Thanks a lot, it works and finaly I din't have to reflash a ROM.
jigners said:
i highly recommend you use USPL : I still yet have to see someone who had a problem after using USPL. This is even endorsed by Dutty Throy - Moderator ROM Cooker par excellence!
look here
http://forum.xda-developers.com/showthread.php?t=505377
and here
http://forum.xda-developers.com/showthread.php?t=462347
format your sd card using fat32 (full format) (if you are a frequent flasher I suggest you get a small capacity sd card – 1Gb - and devote this only for flashing)
rename the RUU_signed.nbh to BLACIMG.nbh and pair this with ROMUpdateUtility -(application file). copy this two files in you formatted sd card.
then using Digital Outcast's USPL GUI: look here
http://forum.xda-developers.com/showthread.php?t=508361
flash the ROM.
please let me know once you've done this succesfully, i wish you the best of luck!
Click to expand...
Click to collapse
Sorry, but I am not sure if I twigged your post. (I dont speak english well) But never mind, the solution of Lyptherion works.
I believe what jigners was suggesting was for you to use USPL instead of HSPL. Both work just as good as each other, though USPL is temporary and would not void warranty should something happen to your device. HSPL is referred to as permanent as it stays on device unless you remove it so would void warranty if something happened to device while it was still on.
But I'm glad you have solved your issue.
Thread closed
This is my first post
Ok i want to flash my phone for the first time and want to know if all my info is correct.
I want to flash my phone from the stock rom to the WM6.5 pure rom because my battery sucks and so does my signal, any idea if this will work for me???
heres the info i have:
" *** Flash X1 without PC - Micro SD Method ***
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
This method works for any 6.1 and 6.5, and even radio rom.
*** Some Kingston brand may have problem to use SD method, no solution other than use RUU method ***
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd,
and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right,
and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction
-------------------------------------------------------------------------------------------------------------------
WM 6.5 ---> http://aerohornet.com/xperia/SEX1-R5.04_PURE.rar
BUG FIXING SUPPORT
*Voice Command is included, but disabled by default. To enable it, download and install
THIS CAB (ROM SEX1 R5.07 VoiceCommand).
This will enable the bluetooth audio gateway too (thanks to a1234567 for posting the registry settings)
*Common WM6.5 glitches: a) Tapping taskbar battery icon does nothing b) scrolling dialer with keypad hidden
causes display corruption
add ons ----> http://forum.xda-developers.com/showpost.php?p=3701695&postcount=2 "
Am i on the right track and is it recommendend i do this ?
First of all, update to official R3-rom via SE update service.
There you will get a new radio (signal strength).
After that, Hard-SPL your phone.
When that's done, yes, you can use the Micro SD method.
thanks a milllion so if u upgrade to this rom first like this is it ok ???
"1. download this: http://rapidshare.com/files/238466530/APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.exe then
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd,
and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right,
and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction"
because that is the R3 rom right ?
Just follow your instructions and flash to gtrab ROM first. then if your reception or battery doesnt increase, you can flash to a different radio version. The way to flash to a different radio version is the same method as ROM but u need to find the radio file. The radio file is also in the ROM developement section, all you need to do is search. I think the lastest radio file is 1.16 or 1.17. Good luck. Just post any questions and people will gladly help you.
PS: Once u start to flash different rom, it is addicting to try to different rom. Dont ask which rom is the best, every ROM has it positive and negative. YOu just got to try them all to see which one fit you the best.
so i downloaded the 1.16 radio and...
"Just extracted from new Korean R3BA015 Rom
http://rapidshare.com/files/25077333...1_16_25_48.zip"
did it this method!
"1. just copy the file *.nbh into the root directory of SD card and rename into kovsimg.nbh
2. Do the ordinary flashing (hold the bottom volume button and the power button until the flash screen appear)
3. Follow the next instruction"
its saying loading for 5 mins now , is this normal???
ok i never hard spl it first i think that might be the problem
im having a huge problem hard spl my phone can someone please guide me step by step thanks
1. State problem
2. Follow this for HardSPL'ing http://forum.xda-developers.com/showthread.php?t=431218
dogans said:
First of all, update to official R3-rom via SE update service.
There you will get a new radio (signal strength).
After that, Hard-SPL your phone.
When that's done, yes, you can use the Micro SD method.
Click to expand...
Click to collapse
Havent you read the posts???He clearly mentioned you to Hard SPL first...It is the most important step in ROM flashing...You can even brick your phone if you dont do this step...
Contact me if you want assistance: Y!MSgr id: [email protected]
oh yes it did it this things tricky cos it gave me connection errors like 10 times before it worked now to install the radio n then the 6.5 pure rom i will install tomorrow thanks a million guys will let u know if i get stuck again lol
thanks a million my radio rom works 100% will be back tomorrow btw did anyone experience a rom with great battery life if you have please post the link
this is also a great rom with no hick ups.
borg28 said:
this is also a great rom with no hick ups.
Click to expand...
Click to collapse
which rom are u refering to and please provide a link thanks
SEX1-R5.04_PURE is working 100% and its gr8 , i wanna thank everyone for helpine me n if u even need application recommendations please let me know i am also here to help and now so can i help with flashing THANKS A MILLION
i cant c my sms's on SEX1-R5.04_PURE and it has no fixes help someone
seems like it was a unfixed bug in the roms of most 6.5's so i then flashed to the UnOff rom n it seems to be working gr8 so far thanks everyone!