Related
yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!
From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?
I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?
Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA
bt on the qtek smells
Grill! Wake up and give us a clue,please!
I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great
so what did you do?
imate rom on a qtek???
i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!
nice we have to get around that.
Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB
Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...
thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,
I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.
Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.
:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.
Here's a PRODUCTION 'T-Mobile Wing' WM6 OS dump in it's imgfs_raw_data form.
I recommend using ImgfsTools2rc2b to reconstruct the NB, which you may then be able to flash on a P4350 using the awizard tools... until such time as someone produces a Hermes / Trinity style custom bootloader / RUU.
I don't have a P4350 here to test unfortunately.
Rapidshare link:
http://rapidshare.com/files/32502333/imgfs_raw_data.zip.html
Hey,
This is really cool that we've finally got some progress on the wm6 scene for the herald. Anyways i own an HTC P4350 (herald) so could you like tell me how to flash this onto my device by converting your data to OS.nb etc etc.
Thanks
ImgfsTools2rc2b:
- http://forum.xda-developers.com/showthread.php?t=298327
How to create the NB:
- Get a regular P4350 RUU, extract using WinRAR, find RUU-signed.nbh
- Use NBHextract to get the OS NB file
- Use NBsplit to split this file
- Use IMGFStoNB to create the new payload file
- Use NBmerge to create the new NB
How to flash a NB to the P4350 using awizard:
- http://forum.xda-developers.com/showpost.php?p=1111175&postcount=9
YOU DO THIS AT YOUR OWN RISK. It might work, it might not. You should be able to flash the regular P4350 RUU back on if all else fails (hopefully).
i havent got an exam for 3 weeks now so i'll cook you guys up a ROM
anyone here wanna test? ill need baout 5 people who know what they are doing and dont mind (possibly) bricking thier phone
I can cook a NB, no problem, but is there a way to flash unsigned files on the Herald?
Since only the OS partition is being flashed, there shouldn't be a bricking danger.
I am prepared to be a tester, i dont know much about ROM cooking though but I know enough to test....
When cooking the ROM will you be using the extRom from T-mobile or just the OS?
Presumably you will not include any IPL or SPL?
Also worth noting is I have 5.04.0001 IPL and 5.04.0000 SPL from the latest ROM.
What is the IPL & SPL of the Wing?
Nice to hear the Herald is finally getting some love. Best of luck!
sorry, just downloaded the zip, what is in there is only a part of what you need for wm6 to boot.
the imgfs partition (which is there) contains all the files and registry etc
the XIP partition (which is missing) contains the kernel and information on how to boot to the OS.
whithout the XIP (found in .nb and .nbh's) this thing will never boot.
and no the WM5 xip wont work.
Ah crap, my bad, leave it with me.
nevermind....
Flashing an unsigned ROM / Backup didn´t work for my German P4350.
Mine is stuck at the Bootloader for now, so please be sure of how you get things done. I Don´t want anyone to be in that **itty situaton of having to wait for the official Romupdate. ( There is no published German one by now )
Maybe this is different with WWE roms ? I dont know exactly...
Where to take WWE Rom?
ImgFS Tools Version 2
In my edition:
In my edition ASerg-Write-OS-ExtRom-Herald.Zip
do you think I could flash this to my wizard?
not a chance
Guys, don't you need the XIP section ? ...
If you do, please upload a wm6 OS.nb and i will give it to you.
stucked at the Bootloader too
anichillus said:
Guys, don't you need the XIP section ? ...
If you do, please upload a wm6 OS.nb and i will give it to you.
Click to expand...
Click to collapse
if they had an .nb then it allready has an XIP, the problem is that they have the imgfs.bin but not he nb so no XIP part
Here are two dumps of teh XDA terra (german)
1.: taken by awizard = 57MB
2.: taken by pdocread = 62MB (pdocread -l = real size of sectors 0x3e00000 = 62MB)
1.: http://rapidshare.com/files/29976175/teraa_awizard.rar
2.: http://rapidshare.com/files/32745275/os62.nb
Good luck
can any one explainme how can i get the ipl/spl, gsm, os, splash screen, htc logo of a rom with tool i need to use and when i get the items how to join it and make a rom ??
thx in advance
try this post here
http://forum.xda-developers.com/showthread.php?t=269583
well thx but that is only for make a ext rom not for a extract items of a rom but thx as well
any suggest
Try the core professional kitchen, it has extraction tools that will let you extract all the different parts of a rom in to their seperate components.
londere said:
can any one explainme how can i get the ipl/spl, gsm, os, splash screen, htc logo of a rom with tool i need to use and when i get the items how to join it and make a rom ??
thx in advance
Click to expand...
Click to collapse
You can use WST to easily extract all files from an nk.nbf file, however, to join/pack them you must use nb2nbf.exe or similar (not sure now)
thx a lot mestrinni also a quick question do you had recive the key index of my device ?
now i had another question in the nb2nbf wich is the adreess and the image name of the htc logo??
Please don't flame. I've tried using the search feature to answer my questions, but I can't find the information that I'm looking for.
I'm trying to flash: Touch-IT wm6.1 19199.1.0.0 - ITsBlack to my TMo Wing. I'm following the directions here: http://forum.xda-developers.com/showthread.php?t=358615. Only I'm stuck and confused. The guide says:
Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Click to expand...
Click to collapse
What the heck is an NBH file and where do I find it?
The guide then says:
Step 4. Place your phone into flightmode.
Click to expand...
Click to collapse
. What is flightmode?
Any help would be greatly appreciated. Sorry, I'm a total noob at this, but I swear I tried using the search feature for about 30 mins to find the answer.
1) An NBH file is a flash file. It contains a portion, or all of a ROM. Meaning, it may include a radio rom and a system rom; or one or the other. You use it with the RUU (ROM Update Utility). The NBH is the ROM itself, the RUU is the Windows program used to load the ROM to the device.
2) Flight mode is simply all radio off mode aka airplane mode. Meaning your cellular radio, your wifi radio, your gps (if builtin), etc are all off.
This sub-forum is for the HTC Wings, not the Tmobile Wing. Please refer to that forum, or the Upgrading, Modifying, and Unlocking subforum with further questions.
P.S.
Unless it's been tested, I'd be hesitant to flash a Touch image to a T-Mobile Wing, since it's not an HTC Touch, unless you've heard it works or have an official RUU package (official NBH) to flash back to, and have run the HardSPL build for the T-Mobile Wing (so that your boot doesn't get screwed).
http://wiki.xda-developers.com/index.php?pagename=FAQ#techicalJargon
http://wiki.xda-developers.com/index.php?pagename=Acronyms
http://wiki.xda-developers.com/index.php?pagename=Flashing Guide
I take no responsability in any damage on your device. If you're not sure what you're doing, take time to learn some basics from wiki.
This is the process to restore your Rhodium (TP2) back to the stock ROM and SPL. This should be enough for you to warranty return your device.
I have "borrowed" all of the examples from various sources on xda. Many thanks must goto jcespi2005 and JugglerLKR who created the guide and packages for the Raphael from which the majority of this is taken. The SPL "relock" procedure was taken from the Hard SPL thread. Credit to cmonex .
Prerequisites
The Rhodium Kitchen version 0.1 (Open the Zip File and read the password from the !!!readmefirst!!!.txt)
WinRAR or 7zip
RhodiumSPLRelocker_079SPL.zip
nbImg v1.1
Warning
avast! home detects buildOS as a virus, I've personally used it on my machine with AV off, and am not infected, but it's up to you.
Overview
You must follow these instructions in the order given. Once you have the Stock SPL you cannot flash any ROM's except the ones that are signed by HTC. For that reason you must restore the ROM first, then the SPL.
Step 1 - Get your Orginal ROM.
If you can find your Carrier's / Supplier's ROM on this wiki page or on their website. Please jump ahead to Step 4 - Flashing back to Shipped Stock ROM.
If you cannot find your ROM on the wiki then download this ROM : RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3.44.25.27_Signed_Ship.exe and proceed to Step 2 - Dumping your phones ROM.
Step 2 - Dumping your phones ROM
First you need to Dump the ROM from your Phone. Follow the instructions in this thread [TUT] Dumping an Rhodium ROM / SPL to obtain 4 *.raw files.
N.B: Although it might seem obvious to senior members, you must dump the ROM from your device before you flash it. If you have flashed another ROM to your device, then your orginal stock ROM is lost. You have 2 options, wait and see if your carrier will release one, or beg someone else with the same device to dump their ROM and share the *.raw files.
Step 3 - Reconstructing the ROM
-3.1: Extract the Kitchen to a Folder on the root of your PC (C:\, D:\, etc).
-3.2: Open the RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3.44.25.27_Signed_Ship.exe file with WinRAR or 7Zip and extract the ruu_signed.nbh file and place it in the BaseROM folder of the Kitchen.
-3.3: Place the Part01.raw (XIP) and Part02.RAW (IMGFS) in the BaseROM folder of the Kitchen.
-3.4: Run RhodiumKitchen.cmd in the Kitchen.
-3.5: Enter the following options into the Kitchen:
-3.6: e, b (for Dumped ROM). Press [Space] once complete.
-3.7: c, a (for Cooking a ROM).
-3.8: Press the "Play" button in BuildOS and wait for it to complete.
-3.9: Close BuildOS, Close PagePool Changer and Press [Space] to goto the main menu.
-3.10: You will now have a Flashable NBH file. Press f to Flash.
Now goto Step 5 - Removing Security Unlock
Step 4 - Flashing back to Shipped Stock ROM
If you were lucky enough to find a shipped ROM on the wiki or your carrier's / supplier's website, then just run the "ship exe" and follow the on screen instructions.
Step 5 - Removing Security Unlock
If you have purchased the SIM/CID/Security unlocker by Olipro, you can re-lock your device using the following tool : http://hpcmonex.net/htc/secrelock.zip
Step 6 - Restoring the Splash Screen
This is only needed if you couldn't find your Shipped Exe. If you have your Shipped Exe, you get the splash with it.
You're best creating a seperate folder out side the kitchen for this.
-6.1: Find a shipped exe from another WVGA device (HD or TD2).
-6.2: Extract the ruu_signed.nbh from the Shipped Exe using WinRAR or 7Zip.
-6.3: Use NBH Extract (in the Kitchen\Tools Folder) on ruu_signed.nbh
-6.4: Delete all files, except 01_MainSplash.nb.
-6.5: Use nbImg.exe as follows: nbimg.exe -F 01_MainSplash.nb -w 480 -h 800
-6.6: Delete 01_MainSplash.nb.
-6.7: Use nbImg.exe as follows: nbimg.exe -F 01_MainSplash.nb.bmp
-6.8: Use HTCRT in the Kitchen\Tools to make a NBH file from the 01_MainSplash.nb.bmp.nb file.
-6.9: Put the new NBH file and copy RhodiumCustomRUU from Kitchen\Tools into an empty Folder.
-6.10: Run the RhodiumCustomRUU.exe to Flash the Splash.
Step 7 - Flashing back to Stock SPL
-7.1: Ensure you already flashed stock ROM and Radio, because stock SPL flash is always the last step before sending the device in.
-7.2: Extract the relocker zip and run the EXE on your PC.
-7.3: If you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). The included one is the 0.79.0000 stock SPL.
-7.4: Flash the Stock SPL
-7.5: Verify if it flashed by checking version in bootloader screen, it should say 0.79.0000, not 0.85.OliNex.
Credits:
-jcespi2005 and JugglerLKR for the Kaiser and Raph Kitchens
-Olipro and cmonex for Hard SPL and Security Unlocking
-pof for nbImg
-Everyone in the Readme.
Reserved
(P.S. I've been writing this in another forum for a few days, hence the Thread Date of the 15th - so this is a bump )
Dave
Did the same thing
Used the Ralphael Kitchen, changed the settings to Rhodium added some settings for Rhodium. used a signed Tmobile US Rom.
Nice Tutorial
Sorry, Dumb Question...
-MOD EDIT: Removed Full Quote
I have found my stock ROM, so I can continue with flashing back to stock, but where do I find the stock SPL?
D_monie3 said:
-MOD EDIT: Removed Full Quote
I have found my stock ROM, so I can continue with flashing back to stock, but where do I find the stock SPL?
Click to expand...
Click to collapse
It's the RhodiumSPLRelocker in the Prerequisites or download it from the Hard SPL thread.
Ta
Dave
First, thanks for this. I write a fair amount of documentation of my work as a network admin so I know how time consuming this is.
cdguider has been kind enough to dump and reconstruct the TMoUS ROM so I don't actually need to do this (although I may just for the exercise) but I do want to start learning how to modify this ROM to suit my own needs. Is there a guide up that will get us newbies started on using the kitchen? Hopefully one that explains in detail what each of the kitchen tools are and what they do as well as how the Rhodium ROM is constructed. I prefer to understand what I am doing versus following recipe steps. For example, My Hermes ROM was partitioned into the ROM and an extended ROM where carriers could put their installers. Does the Rhodium have an ExtROM?
OK, back to the search tool.
S
sleonard said:
First, thanks for this. I write a fair amount of documentation of my work as a network admin so I know how time consuming this is.
cdguider has been kind enough to dump and reconstruct the TMoUS ROM so I don't actually need to do this (although I may just for the exercise) but I do want to start learning how to modify this ROM to suit my own needs. Is there a guide up that will get us newbies started on using the kitchen? Hopefully one that explains in detail what each of the kitchen tools are and what they do as well as how the Rhodium ROM is constructed. I prefer to understand what I am doing versus following recipe steps. For example, My Hermes ROM was partitioned into the ROM and an extended ROM where carriers could put their installers. Does the Rhodium have an ExtROM?
OK, back to the search tool.
S
Click to expand...
Click to collapse
No it doesn't.
For help with this Kitchen, see _Alex_'s cooking guides on the wiki for the Kaiser. That's where I started reading and then I just kept going, download kitchens published by other chefs and see how they put stuff together. There are two main types buildOS (like this one) and PRB that uses bepe's platform rebuilder - ervius's visual kitchen is based on it.
Thanks
Dave
i reconstructed the uk orange stk rom all ok very good guide thank you!
i had to do this because i lots the hard reset it just flashes up no immage then back to boot loader i though stock rom would resolve this i rebooted it and still have no hard reset still says no immage boo boo whats going on is it due to the ruu i am using i thried the rhodium one and the v1.1 one what ever it is i also tried dave's wrapper and a kaiser on out the kitchen tools all same results so i guess not any ideas ppl!?
matttytn2 said:
i reconstructed the uk orange stk rom all ok very good guide thank you!
i had to do this because i lots the hard reset it just flashes up no immage then back to boot loader i though stock rom would resolve this i rebooted it and still have no hard reset still says no immage boo boo whats going on is it due to the ruu i am using i thried the rhodium one and the v1.1 one what ever it is i also tried dave's wrapper and a kaiser on out the kitchen tools all same results so i guess not any ideas ppl!?
Click to expand...
Click to collapse
So you are stuck in the bootloader?
What does it say in the bootloader?
Ta
Dave
Sorted it i am such a fool i was doing the wrong button combo!!!!!!
This is fantastic i am now going to have a play at cooking up my own i know i can do this now i will get my head down and work this stuff out i mite have my first rom by xmas
question about step 3.9
"Close BuildOS, Close PagePool Changer and Press [Space] to goto the ."
how can i close PagePool Changer ? it doesnt work.....
and ,which "main menu" i can goto?
leeneo said:
question about step 3.9
"Close BuildOS, Close PagePool Changer and Press [Space] to goto the ."
how can i close PagePool Changer ? it doesnt work.....
and ,which "main menu" i can goto?
Click to expand...
Click to collapse
Just click the [X] in the top right.
Pressing space will take you to the first set of options that the batch file offered you.
Thanks
Dave
leeneo said:
:12
:12.PagePool.Changer.bat
tools\xvi32\xvi32.exe RUU_signed.nbh
GOTO :EOFQUOTE]
this code in RhodiumKitchen.CMD
but , i cant find PagePool.Changer.bat ........
Click to expand...
Click to collapse
leeneo said:
leeneo said:
:12
:12.PagePool.Changer.bat
tools\xvi32\xvi32.exe RUU_signed.nbh
GOTO :EOFQUOTE]
this code in RhodiumKitchen.CMD
but , i cant find PagePool.Changer.bat ........
Click to expand...
Click to collapse
That's a label in the batch file .
Search for it in the RhodiumKitchen.CMD and see what's called from there.
P.S. I don't have this kitchen on this computer so a lot of guess work and memory on my part.
Dave
Click to expand...
Click to collapse
DaveShaw said:
leeneo said:
That's a label in the batch file .
Search for it in the RhodiumKitchen.CMD and see what's called from there.
P.S. I don't have this kitchen on this computer so a lot of guess work and memory on my part.
Dave
Click to expand...
Click to collapse
ok , i see ..
you kind-hearted ! thx
Click to expand...
Click to collapse
yea thanks for the thread dave, When i use these tools to do up my own splash it chops off at the bottom... is there a patcher out yet to fix this?
thx for the tutorial , how can i take new xip/sys and replace the existing?and how can i remove and add prgorams?
joshkoss said:
yea thanks for the thread dave, When i use these tools to do up my own splash it chops off at the bottom... is there a patcher out yet to fix this?
Click to expand...
Click to collapse
Yes, but I can't recall where I saw it . It's not for the TP2 though, maybe HD or TP.
saymyname said:
thx for the tutorial , how can i take new xip/sys and replace the existing?and how can i remove and add prgorams?
Click to expand...
Click to collapse
Porting isn't simple, have a look for some tutorials on using BuildOS and porting.
Adding and removing programs, to add, just create OEM packages, to remove, just remove them.
Have a look at _Alex_'s cooking tutorials on the Kaiser Wiki.
Dave
DaveShaw said:
Yes, but I can't recall where I saw it . It's not for the TP2 though, maybe HD or TP.
Dave
Click to expand...
Click to collapse
yep the tp one has no affect on our splash unfortunatly. i've already posted in theyre thread askign they make it compatible. but just wonderin if you came across anything about this is in your many travels.
Question
Hi everyone ...
First of all Thanks alot for this Tut Dave awesome work.
I dumped my Stock Rom from a unbranded O2 TP2 and rebuild it.
For Cooking i used the signed_ruu from RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3. 44.25.27_Signed_Ship.exe
It did everything like described and i've got a
signed_ruu.nbh (1.19.207.1) newest o2 Stock Rom.
Should be fine right?
Do i also need to do Step 6 so creating a splash screen?
If anyone needs this rom drop me a message ...