my topaz needs a service and i restored the original and rom. when i used the relocker that is provided by olinex, my device is not booting. i need help please. my device shows that its running stock spl 1.33.0000. when i come to flash another rom (sock rom) it will not allow me to do so.it says not allowed please help me.im begging
Hey. If I am not wrong, you need to load the stock rom before lock it with SPL again.
So what I would do is try to HSPL again, load the stock rom and then lock it with the SPL.
Hope it works. There are a few threads that shows you how to load the stock rom back in order to send it to HTC warranty service.
Cheers.
it wont let me load hspl. it will say not allowed for some reason
please tell us exactly your steps ...
never mind. i was getting errors because i was trying to install a rom that was not meant for my phone after i put the stock spl and i didnt know that europe had more than one wwe version
Related
Hi,
I have upgraded my Orange SPV M700 (UK) shipped roms to the following:
SPL-1.30.Olipro
AX3L_OS v2.0.8.2
I may have mis-understood from the readme but I thought the updated radio was part of AX3L's rom update as when it completed everything was updated except the radio version (this still showed 1.30.00.01 in device info. the ROM shows 2.0.8.2).
So I updated just the Radio to version 1.46.00.11 and the flash process completed ok, however still it shows 1.30.00.01 in device information.....any idea how to fix this?
I followed the guides on
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Apart from the radio not showing the correct version everything else is fine, GPS, etc. does work but I did notice it seemed to get very warm at the back of the handset (can't remember it doing this before the upgrades).
Thanks for any help.
hrdspl 1.30 desn't upgrae radio. Get flash witouth go in bootloader
So, are you saying start the radio rom upgrade without going into bootloader? Just want to confirm as the guides state otherwise...
http://forum.xda-developers.com/showthread.php?t=316274 I download the radio here and upgraded only the radio. I got error text the first time i tried to flash but when phone go to bootloader flash,it again, works perfect!
here you find the 1.46.30.11 radio too
ketma said:
So, are you saying start the radio rom upgrade without going into bootloader? Just want to confirm as the guides state otherwise...
Click to expand...
Click to collapse
Yes. In that way you flash with sspl.
Thanks for both your replies, flashed ok and now updated with 1.46.30.11.
Cheers.
can i just re-emphasize that it's quite dangerous to flash radios without hard-spl, and not the kind of advice you want to be giving out on this forum. If you're so convinced it's the Hard-SPL, load a different hard-spl before you flash the radio.. SSPL isn't a good alternative as all it does it bypass CID check, not protect your device in case of a bad flash
Switch back to SPL-1.20.Olipro and you can flash radio roms.
yes, please follow the guides on the site, which now reflect the option of going back to old hard spl if 1.30 doesn't seem to be working.
it is not good advice to be handing out in the forum that people should flash radio without hard-spl. You guys are going to wind up responsible for a lot of noob bricks, and you're lucky you don't have one yourself
Hi. I was trying to upgrade my phone with a custom ROM (i had no idea what i was doing) I was following this link
http://www.pocketpcaddict.com/forums/software/21202-wm6-touchflo-8125-g3-now-g4.html
all goes well until I click on update. as soon as i click on update my phone turns off and the update process cannot continue. It does not even get a chance to update. can anyone help me. I have NO idea what I am doing and i have NO idea what i am doing wrong. Can anyone tell me what RUU to put on the phone. i have the WWE stock 2.25.11.1. I really need to get my phone fixed.
Please help.
Err.....imma try that rom you posted, and see what happens
edit: It worked for me, i think you probably either didn't unlock your phone or you didn't upgrade to the tmobile 2.26 version first. Or it's either
yeah i got the same problem i happen to me today?>!
the link has a password on it. Mine did this as well
what do u mean by passowrd/ but all i need to do is get both ipl and spl numbers the sam/ i have the ipl but not the spl the same number as the ipl please help/ and my phone wont update the second time i go through button rom thanks
unlocking
If your IPL and SPL nos. don't match u need to downgrade ROM and upgrade all over again.
I have try'd to update my wizard, I have downloaded the roms, for wm6 here on this forum, everytime I update the Phone he stuks at 99% then nothing happens anymore I have to reset the phone then comes the sreen with the colors and the radio version, and then I can load the original T-Mobile rom, please help me I want to upgrade the phone to WM6
acovision said:
I have try'd to update my wizard, I have downloaded the roms, for wm6 here on this forum, everytime I update the Phone he stuks at 99% then nothing happens anymore I have to reset the phone then comes the sreen with the colors and the radio version, and then I can load the original T-Mobile rom, please help me I want to upgrade the phone to WM6
Click to expand...
Click to collapse
Your phone might be CID locked...when it is done with 99% and you reset the phone, does it load the original ROM back again? if so, then you need to CID unlock the phone.
can anyone give me a step by step on how to flash my ROM back to STOCK?
if you want it for warranty reasons then you will need to flash the SPL also to stock. you can just download the latest ROM from HTC website and flash it. it will give you the stock ROM on the existing SPL.
End of the post http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1.
Remember you will also need to go back to stock spl if for warranty purposes.
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
7896zx said:
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
Click to expand...
Click to collapse
nevermind what i said there, for sum reason it works again now
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
accountabc said:
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
Click to expand...
Click to collapse
That depends. What was your original rom and spl? Are you entitled (via location) to use the new EU rom, eg if you live in America then this may not be acceptable to HTC.
When you boot up the new rom, are the screen colours ok as this will tell you if you have the right spl for your rom? If you have the latest EU rom, I doubt that 1.14 spl would be the right one, but it could be I guess. With the stock rom, you should also get the stock radio. So provided you have the stock rom available to your area, with the correct matching spl and the radio, there is no way to tell of your exploits
Thanks for your reply
The problem is that the screen of my device won't turn on anymore (Device powers on, I can connect with activesync, digitizer works fine) so i have no way of checking if I have the right SPL or not...
I also have no idea what my stock rom/spl/radio version was.. I live in the Netherlands, and through the official HTC site i flashed the latest rom, which included a radio (a radio version was part of the filename). What I'm trying to find out is:
Could 1.14 have been my stock SPL, or was that version never used on any Dutch Blackstone?
If the spl doesn't match the rom (wrong colours) that isn't much of a problem; I can tell them I tried to update my rom because I thought maybe my screen would work again after I installed the latest ROM... But if I have a SPL that was never even used I don't think they will buy that
According to the wiki there are 2 Dutch roms - one would require a 1.14.0000 spl and the other a 1.54.0000 spl. So I guess either of those would do.
When you flashed the rom from the website, where you still using hspl or uspl? Depending on the rom you flashed you will need to flash the matching spl. Do you have the full notation/naming of the rom you flashed. This should give an indication of which spl you will need.
As much as I appreciate ClydeB1 for assisting you, I fail to see a reason for this thread. A thread already exists for flashing advice, i.e. the dummies guide. Also the HardSPL thread exists and has advice on how to flash back to stock. So depending on your query post in either of these.
The initial query and reason this thread was created has been answered, so no need for this thread to remain open. Thread closed
I have a Bell Mobility HD7 but it's stuck thinking it's a Telstra HD7 T9296 rather than a Bell HD7 T9295...
Because of this, I believe, I haven't received an update from Bell for the "disappearing keyboard" thing.
Any idea how I can make it a "fully bell" rom? Do I need to do the "GoldCard" method?
sounds like you are running a custom rom. Is the spl an hspl or original spl (the tricolor screen seen when booting with vol-and power at the same time)? It should say the SPL v1.x.x or whatever version of it is the ospl, meaning the rom is stock and can only be flashed with another stock (i.e. Signed) rom, although for this you shouldn't need gold card, any rom updater should be able to flash provided it is a signed rom you try to flash. You will need to find the rom that came with your device originally, and the rom update package, should be easily available here though. If your SPL screen says HSPL Cortulla then you have a custom spl and can flash any rom you like if it is compatible, i.e. custom roms. That is as much as i can help you there, all the info is in the q&a stickies
Good luck with the hd7, i found it a pain in my butt..lol
(just stay away from the schudiag.img utility!)
Yeah, it's actually a legitimate signed ROM. If I try to flash a BellMo RUU it fails. One of Ansar's ROMs changed my device id and whatnot. So strange.
For some reason, some ROMs flash over others better..when I half-bricked my HD7 into a USB host bootloop, the only ROM that would take it out was an O2 UK signed ROM, and the phone is TMOBUS all the way..once I got 02 to work, then it seemed the ROMs that were failing previously suddenly worked..strange, I didn't investigate to determine a cause or way of deciding which one goes on top of which- I just flashed with trial and error since my phone was already half-bricked and useless already
By the way did you try to install a HSPL via the DFT XSPL installer? I would try and see if it would install the HSPL then try to flash another signed (or custom) ROM on top, that should fix the problem..