Related
I really enjoy this forum since it helps me a lot to increase the productivity with my HTC Touch Pro. I found many useful applications. Unfortunately, after installing a large number of them, I run into the infamous 32 processes limit of Windows Mobile. So I decided to write my own app that combines all the features that I find useful. It is implemented as a Pocket PC service, so it does not require an own process.
Here are the features:
- Better vibration for incoming calls. I found the built-in vibration function very annoying as it vibrates permanently during an incoming call. This extensions vibrates in pulses of 300 ms with a pause of one second when a call is incoming
- SIP changer depending on stylus state. If stylus is out, another soft input panel is selected as if stylus is in. Can be changed via the registry keys StylusInSIP and StylusOutSIP.
- Stroke Launcher. If the finger is stroked from one button to another, an application is launched.Four directions are possible: From home button to accept phone call button and vice versa as well as from back button to reject phone call button and vice versa. The applications can be configured via the RightUpApp, RightDownApp, LeftUpApp and LeftDownApp registry keys. The required length of the stroke can be configured via the GestureMinLen registry key. Unfortunately, the program has to poll HTC's NAV sensor directly in order to not disturb the functionality of the wheel sensor. The sleep time between two polls can be configured with the GesturePollingDelay (in ms). If you use very fast strokes and the device does not react, try to decrease this value.
- Key lock if device is face down. The key lock is activated and the device is powered off if it is turned face down. The key locked is acknowledged by two short vibrations. Key lock can be disabled depending on the foreground window or active process list. Exclude list can be specified via the ExcludedProcesses and ExcludedWindows registry keys. The tolerance for the face down detection can be configured via the FacedownTolerance registry key.
The registry settings for Buttler are stored in HKLM\Software\Butler. Each extension described above can be switched of by setting the EnableFeature registry key to 0.
As I have not much time to react on bugs or feature requests, I have also attached the source code. Fell free to modify my Butler but please publish it here so that we all can benefit from it.
The Butler service is started with the program "StartButler.exe" located in the Windows directory. I call it from a MortScript during device boot. It is important that HTC Touch Flo 3D is already loaded. For some reason, the gsensors can not be initialized if Touch Flo 3D is not loaded. Here is the code I use:
# Wait for TouchFlo3D
While(ProcExists("manila.exe")=0)
Sleep(1000)
EndWhile
# Start the butler
Run("\Windows\StartButler.exe")
Have fun!
Siggie
Change log:
V1.0:
- Initial release
V1.1:
- Reading of the NAV sensor completely rewritten. The sensor is now directly polled. This does not interfere with other programs, so the wheel sensor and the camera is working again.
- EnableFeature registry keys added for switching off each extension individually.
linuxis said:
New thread For Keyboard Slide Out Support:
http://forum.xda-developers.com/showthread.php?p=3305730#post3305730
Updated CAB is there. Happy using.
Click to expand...
Click to collapse
sounds like an excellent program, I'll try it
man, great app. it is totally replacing hbutton, and lets me start using voice commander again. two questions....can you list the other sip layout entries? i really want to use the full qwerty when the stylus is out and in. secondly, is there a way to define a diff lock such as s2u2 and then shut down. either way, the function is fine as is and really, thanks for sharing
I'm interest in Stroke Launcher more than the other apps. is there a chance you can provide a cab for just that portion of your application> I know it's contrary to your original intent (of combining apps) but that's the only one of those apps I really would want so I have the opposite- no desire to install any extra apps even if it's a single process Thanks.
about to give it a shot, sounds great
but i second the request to have s2u2 when put face down
noticed that if you delete the entries for sip, keeping the actual keys though. butler wont start. guess it still needs to check those values i was trying to get it to do nothing to my sip's and just keep full qwerty.
edit** here is the key for full qwerty {36BC8FF6-8241-4c36-ABDE-204885471FEE} and the other keys are all listed under HKCR/CLSID and look like this:
(HTC SIPs)
{198D503A-...} = Phone Keypad
{36BC8FF6-...} = Full QWERTY
{62B00599-...} = Compact QWERTY
(MS Default SIPs)
{42429667-...} = Keyboard
{42429690-...} = Letter Recognizer
{42429691-...} = Block Recognizer
{F0034DD0-...} = Transcriber
Maybe it would be easier to be able to just input the name
Sound great, I'll give it a try as well.
can you make it so that when it face down, the light turn off?
ok i figured out how to change what sip came when
and i turned off "facedown"
only problem is that the smart scroll such as zooming in opera and pics no longer works or autofocus in camera
Great app cannot go unrecognized!
so i downloaded and installed and forgot to make shortcut. A day after i just luanch it using fileexplorer with copy on storage card. Sounds like alot but considering i only reset once a week maybe... its not so bad.
After using it for a half day. I have to admit i was waiting for a way to use shortcuts with out using manilla. I am a RLtoday fan and i dont really use all of manilla features. I LOVE IT. I am considering removing Manilla all together. This has great potential for those of use that want alternatives to manilla.
This should really be placed in essentials.
Thank you.
**BTW cant get screen lock disabled, anyone have more detailed instructions for disabling face down lock?
to disable the lock i set the sensor threshold to 0
in the registry path that was said earlier in the thread
V1.1 available
I have added a new version that fixes the wheel sensor and camera problem. There are also now registry keys available to switch off each feature individually.
ok I dont know what happend but i installed this app and after a restart the keyboard pops up on the splash screen and the phone freezes.. I need a resolution fast. I really dotn want to hard reset. I have a lot of stuff i need back up.... Please help!!!
fuk it. had to hard reset.
any chance on just releasing stroke launcher as a standalone app so we don't need to install all and then disable them? Thanks
Exclude S2U2
How can I disable stroke launcher, when s2u2 is active? I tried to add S2U2(name of DWORD value=0) to ExcludedWindows and s2u2.exe to ExcludedProcesses, but stroke launcher is still active, any ideas?
Great App siggie1970,
Thanks .. I Think The most important thing to do now is to add a User Interface for the configuration..as it kinda hard to do it through the registry
thanks
Wow amazing programs are being released and 09 just started. Great name btw How are resources being used with this program? Since your combining apps perhaps you could work with the guy to incorporate his new alternative to gyrator/ screen tilt app.
bugsykoosh said:
any chance on just releasing stroke launcher as a standalone app so we don't need to install all and then disable them? Thanks
Click to expand...
Click to collapse
that is not the purpose of the program
would it be possible to turn one of the sides into scrolling up and down?
like leave the left up and down for app launching but right side scrolling that would make it pretty much perfect for me
then of course a configurator, although i got it setup but no fun having to change on each new install
It sounds like a great program, thanks! Stroke Launcher, I like that one LOL
Mobile Shell is great product but still it is clear that many things i can get on my regular today screen i can't get with MShell.
1. RSS news *there are no widget, only i can do is to put shortcut to external RSS viewer. Today screen allow me to put "live" RSS feed
2. Calendar is very simple and i would like to see more lines (appointments) in it
3. Photo widget with right/left arrows like windows media player widget
4. Possibility to move widgets without going to editing menu *ok, maybe with one press of some button
5. Maybe some Notes widget
Mobile Shell must keep Wm professional and oriented to business users, also.
It would be awesome if it would replace the standard dialer when you hit the green (call) button.
And it would nice to have a Widget API.
i agree with keekle!
Definately agree with kekkle, but it should not only be used for outgoing calls but also for incoming calls too
If it only showed a contacts thumbnail and maybe a 'slide to answer' bar?
there are a few call managers that already do this but none of them integrate with SPB:MS design
you should post it at spb's forum.not here.
spbclub.com
FEWidget
You can try the FEWidget, it looks like the Samsung Widgets in Omnias
Or the Samsung WidgetPlus that come with the OmniaPRO B7610 (not Omnia II i8000)
http://forum.xda-developers.com/showthread.php?p=4275422
I have spent a long time over on the throttle launcher forums learning how to code themes and am now ready to release my first full theme TLCARS.
For those that don't know it is based on the LCARS computer system from the Star Trek Universe.
Screenshots of both versions are available here.
Dowloads are available from the throttle launcher site theme section
(Q)VGA http://www.throttlelauncher.com/por...9/catid,5/sobi2Id,653/sobi2Task,sobi2Details/
W(Q)VGA http://www.throttlelauncher.com/por...9/catid,5/sobi2Id,652/sobi2Task,sobi2Details/
Full details of theme functions are below
01 homescreen
+ clicking on the time will open the clock settings page
+ clicking on the seconds will open the task manager specified in the task manager action under subsystems / tlcars settings / footer
+ clicking on the stardate will open the widget manager page to add additional widget pages to the homescreen.
+ there are 5 additional blank buttons in the current version which can be used to add additional pages to the theme
* it is my intention to offer to recode any existing widget as a page for a small donation via paypal - please PM me requests
02 functions
+ this displays a list of installed programs
+ favourites can be added to the top section and removed using the + and - buttons
03 subsystems
+ access to all major control panel settings including the tlcars settings page for configuring the theme and hailing frequencies for controlling the various radios
04 away missions
+ use left right up and down swipes to change month and year and click to open your calendar application
* widescreen version only has additional next appointment information below the calendar
05 holo suite
+ access to the audio library and image library
06 climate
+ shows a three day text only forcast for the city specified under subsystems / tlcars settings / weather
07 contacts
+ lists contacts in favourites first followed by a third page will all contacts
+ swipe right to move through favourites
+ press add or remove to manage favourites
+ swipe right again to reach all contacts and then up or down to scroll
+ swipe left to return to favourites
08 call / sms / emails
+ shows the number of missed calls, unread sms and emails on the right hand side
+ pressing will open the default winmo application for each
09 dialer
+ opens the default dialer specified under subsystems / tlcars settings / footer
10 audio library
+ click on the right hand disc image to open the library and start your default player specified under subsystems / tlcars settings / music
+ use the buttons on left hand side to play / pause / skip tracks forward and back / increase and decrease volume
11 image library
+ displays images from a single specified location set in subsystems / tlcars settings / images
INSTALL NOTES
+ inside the setup folder for the theme there is a lcars.ttf file - in order to get the theme to display correctly copy this to your \windows\fonts folder
Reserved for updates
Will this theme work with the newest 1.19 version of TL?
i'm running it on 1.1.10
alecoddlyiv said:
i'm running it on 1.1.10
Click to expand...
Click to collapse
Ok i will try it with 1.1.19 and report if it works.
Ok, first report:
The taskbar looks not very good, see screen shot of the home page.
The programs page is very hard to scroll, it overshoots always and one has to scroll up and down to get to the program. One can only scroll over the program tabs and also to stop scrolling, so it is very often the case that a program is unwanted launched. It would be better if there was the possibility to scroll on the side of the program tabs.
On the other pages the regular windows taskbar is shown.
That is all for the moment... i am still playing with it. I love the look of this theme, really. Thanks for this.
thanks for the fb - the artifacts could be a result of the rom you are using. i have had that appear once or twice since upgrading to 6.5 but it does tend to disappear?
alecoddlyiv said:
thanks for the fb - the artifacts could be a result of the rom you are using. i have had that appear once or twice since upgrading to 6.5 but it does tend to disappear?
Click to expand...
Click to collapse
Yes you were right, it has disappeared now.
I sense a bigger battery drain, but i am not sure if it is due to TL itself.
Also i think the sliding from one page to the next or the opening of a page through the buttons could be a bit faster.
Otherwise this theme just rocks.
Are you DaceC?
This theme is amazing and your best work, I tested on my Imagio and it works very good.
I always recommend to use Standalone mode with TL instead of plugin today, it works better.
congratulations!!
Yes I am DaveC ironically I hadn't intended to get so involved with TL when I registered so decided to use mix up my name. Now im stuck with two names.
I have never actually tried standalone mode - will have to give it a go.
While I am not personally a fan of the theme style, I must say that I am impressed. Very good job sir. Keep it up!
background
How can I get the black background so it look slike the pic in the post?
nvr mind fixed..
new question.. how do i off the sound??
rkmoray said:
How can I get the black background so it look slike the pic in the post?
Click to expand...
Click to collapse
If you are using stanalone mode, just delete the "Background" path if you have one.
darkworldz said:
nvr mind fixed..
new question.. how do i off the sound??
Click to expand...
Click to collapse
you have to go into the subsystems and hailing freqencies and set to vibrate or sound off at the moment.
i could probably add a switch to the config file that will mute the theme sounds but not the phone sounds for 1.1
Fireslave said:
If you are using stanalone mode, just delete the "Background" path if you have one.
Click to expand...
Click to collapse
Newbie question sorry, but where do I delete the background path?
rkmoray said:
Newbie question sorry, but where do I delete the background path?
Click to expand...
Click to collapse
Go to ThrottleConfig then click on "theme-standalone-Background" be sure is empty if not click on the text and leave it in blank.
claus1953 said:
The programs page is very hard to scroll, it overshoots always and one has to scroll up and down to get to the program.
Click to expand...
Click to collapse
If you are running as a today page try in standalone.
What device resolution are you using? i think for thr W version I could space the icons out a little more but in the mean time you can press and hold to scroll up or down in blocks without it actually selecting the item you have pressed.
alecoddlyiv said:
If you are running as a today page try in standalone.
What device resolution are you using? i think for thr W version I could space the icons out a little more but in the mean time you can press and hold to scroll up or down in blocks without it actually selecting the item you have pressed.
Click to expand...
Click to collapse
I have the same device as you Omnia i900, WQVGA.
Ok scrolling like that works better.
I have seen that sometimes i have to restart TL as it becomes sluggish and unresponsive.
Will try to use as standalone, i only need to see how to exit TL programatically, as i use a switcher to switch between Titanium, TouchFLO, MobileShell and TL.
that must make for a huge memory overhead
WinStart V2.4
Features
Task manager (close/view background apps)
Icon's image and name can be changed
Icons can be moved
Background image can be easily changed
Text color of icon can be changed
Lock feature
Quick list of recent programs
Possibility to order icons by name and type
Icon's name can be hidden
What's new?
WinStart can be assigned to any key
Long press on top icons are now working
Square background image possibility
New animation
Possibility to disable the background image (for old devices, the speed gain is real)
Scrolling function rewrited (I hope you will tell me if it's better or worse!)
Various bugs fixed (folder with dots are correctly printed, quick links and background windows are now correctly handled, landscape correctly handled, no more gap between icons...)
Download explications
Please go to my website !
Cant open file
Sent from my X10i using XDA App
You're right, wrong cab...
I edited the first post, you should be able to test now !
Performance on Rhodium
[EDIT]
I am using the full version now, which shas an option to disable the original start menu, which saves alot of memory.
Performance is great on the Rhodium
[/EDIT]
I wanted to try it on the Tilt 2, because it is a memory starved device.
There is no memory advantage to using this over the normal start menu.
It looks nice, and the recent program list is great.
But for the Rhhodium, memory is critical, so I will go back to using the Panel Stat menu cooked into Energy ROMs.
It would be nice if the free version would have had the graphic transitions when opening folders. It looked cool on the demo that was done on an HD2, but, other devices, such as my Tilt 2 or my Fuze, are slower.
I would want to see that performance before purchasing. If I could see that I would consider purchasing it for my Fuze.
But, as far as the memory usage. I can't use it with my Tilt 2. It consumes more memory than having the original start menu.
The full version can disable the original start menu, so you can spare approx 30 Mo in RAM.
The demo was done on an HD (older than Tilt2) and no problems. I think it will be smooth for both (Tilt2 and Fuze), but I'm not sure of that!
I can't create a demo version with graphic transitions, too much work...
As you are a "productive and contributing member", I can give you a serial... Send me a PM if you are interested!
petititi said:
The full version can disable the original start menu, so you can spare approx 30 Mo in RAM.
The demo was done on an HD (older than Tilt2) and no problems. I think it will be smooth for both (Tilt2 and Fuze), but I'm not sure of that!
I can't create a demo version with graphic transitions, too much work...
As you are a "productive and contributing member", I can give you a serial... Send me a PM if you are interested!
Click to expand...
Click to collapse
Thanks.
While testing the full paid version, I am very impressed.
I have more memory available than before, when I was using the Panel Start menu available in Energy Roms.
This start menu is great.
Starts faster.
More responsive.
Better transitioning graphics.
Graphics are very smooth on my Tilt 2.
And the most recent program feature is really nice to have.
This is definitely worth the money.
Thanks for this feedback
WinStart with CHT Softkeys
First of all very nice!!
I purchased the full version at your referenced site.
I am having a problem. I use CHT 2.0 on my NRGZ28 ROM, and I use the CHT Softkeys. I cannot get WinStart to pull up the start menu using the "StartMenu" CHT softkey. If I disable the CHT softkeys, the the normal StartMenu icon works fine.
Within CHT SoftKeys, there are ways to set key assignments:
"Run path" which prompts me to enter an application to run. WinStart is not a listed application.
"Command Line" which prompts me to "enter command line parameters". I don't know what to do here?
Is there a way you can get this to work with the CHT SoftKeys?
I have CHT2.0 too, but I never used the SoftKeys...
I take a look and come back to tell you how do this.
WinStart with XDA_UC
Thank you...while waiting...I'll ask another question.
I flash ROM's a lot when new versions come out. I use XDA_UC to install my various apps that I use. WinStart will DEFINITELY be one.
My question: On a fresh install with a new ROM, is there a registry key or something that I should install along with the cab to get the initial "fresh-install" parameters - username/password information - automatically applied?
OK, so it's not as easy as I thought... I try something but it work only the first time... What I do :
In HKCU\Software\HTC\Manila
>Set CHT.Softkeys.KeyCustom1.Path to: \Program Files\winstart\winstart.exe (no quotes or anything else)
In CHT editor, set icon1 to custom1... But as said before this will work only the first time.
I work on this and in a few days (I hope 24h), I will post a new version.
For the second question, you will have to save these two values :
HKLM/Software/Manila_WinStart/licenceKey and HKLM/Software/Manila_WinStart/password.
You can also export the entire HKLM/Software/Manila_WinStart/ key to save your settings too... If this is not an option for you, tell me via PM, I will send you a patcher...
Winstart / Softkeys
petititi said:
OK, so it's not as easy as I thought... I try something but it work only the first time... What I do :
In HKCU\Software\HTC\Manila
>Set CHT.Softkeys.KeyCustom1.Path to: \Program Files\winstart\winstart.exe (no quotes or anything else)
In CHT editor, set icon1 to custom1... But as said before this will work only the first time.
I work on this and in a few days (I hope 24h), I will post a new version.
For the second question, you will have to save these two values :
HKLM/Software/Manila_WinStart/licenceKey and HKLM/Software/Manila_WinStart/password.
You can also export the entire HKLM/Software/Manila_WinStart/ key to save your settings too... If this is not an option for you, tell me via PM, I will send you a patcher...
Click to expand...
Click to collapse
Hello - I appear to have the same issue as WMG316. After installation and reboot. I can go to \Program Files\WinStart\ and run ConfigWinstart.exe. I select DEBUG, Stop Service, and then Start Service, Back, Save. At this point the Hard and Softkeys work properly until the next reboot. I have not put any WinStart in my Startup folder.
I hope this helps get closer to a long-term solution. I really like this app and it is still worth the money.
petititi said:
OK, so it's not as easy as I thought... I try something but it work only the first time... What I do :
In HKCU\Software\HTC\Manila
>Set CHT.Softkeys.KeyCustom1.Path to: \Program Files\winstart\winstart.exe (no quotes or anything else)
In CHT editor, set icon1 to custom1... But as said before this will work only the first time.
I work on this and in a few days (I hope 24h), I will post a new version.
snip...
Click to expand...
Click to collapse
Thanks...I had tried that and came to same conclusion...only works on the first try!
Hopefully you'll get that worked out so CHT SoftKeys can be used!!
I look forward to the update.
How to Backup "Renamed Icons"
Another question. I have renamed a few of the icons in the start menu. I cannot locate where these changes are saved. Is there a way to backup these settings for subsequent ROM flashes?
wmg316, you can export registry key HKLM-Security-Shell-Startinfo-Start , which contains data about all links: their position, icon, name & visibility..
Start Menu Hardware Key on Rhodium
Maybe a bug?
Since disabling the CHT SoftKeys I have had no problem initiating the Start Menu with the default soft key. I am still in hopes that you will fix that issue though!
My problem...when I try to use the hardware key start menu on the Tilt 2 (Rhodium) it does not work.
I can get it to work by following these steps:
Use Start Menu soft key to go to Start Menu
Select Menu, Options
At this point the option to "Hook the windows hardware key" is checked...I uncheck this...then check it again and select save
After this process, the hardware key works.
After a soft reset, the hardware key does not work and I have to go through the aforementioned steps to get it to work again.
Yes,I think this problem is the same as CHT softkey (they emulate an hardware keydown).
So I think in a few hours these two bugs will be corrected !
The problem is now solved...
I work on an option to save/restore the settings so I will change the version number of first post when finished.
For now you can install the attached file which correct the bug but don't include the option to save/restore settings...
petititi said:
The problem is now solved...
I work on an option to save/restore the settings so I will change the version number of first post when finished.
For now you can install the attached file which correct the bug but don't include the option to save/restore settings...
Click to expand...
Click to collapse
Confirmed to work:
I uninstalled v2.1 and soft reset
I installed v2.2
Turned on CHT Softkeys
Tested CHT Softkey start menu - worked
Tested hardware key start menu - worked
Soft reset
Tested CHT Softkey and hardware start menus again - worked
Thank you!!
You guys work fast! The issue with the hardware and CHT Softbar starting was my only real issue with this. I bought the paid version and love it. Thank you.
The only other minor cosmetic thing I have noticed is that when you first open the program, it leaves some odd artifacts on the screen as you run it the first time. For example, after a soft reset, the first time I open the menu, I can't see my task bar on top, I see a part of my CHT hometab. Once I close it, it works great for all other openings.
Also, when you click on a program, the animation works fines to zoom the icon at me, but once it is done, the screen briefly jumps back to the start menu background showing me just the icon I clicked on until the program actually opens.
Like I said, purely cosmetic, but I figured I would mention them. Again, thanks a ton for the program, it is by far and away the best start menu I have tried. Light years ahead of even the default WM one.
Can someone kindly repost the APK of ReLaunch 1.4?
The links on the original post are dead now.
Thanks!
marcoNST said:
Can someone kindly repost the APK of ReLaunch 1.4?
The links on the original post are dead now.
Thanks!
Click to expand...
Click to collapse
There seem to be at least 3 ReLaunch forks. The original ends at 1.3.8 (the easiest one to find--Google is your friend). There is then the sequence you are asking about, moving from 1.4 to now 1.4.8. I've attached 1.4.8 below. Don't know anything about it. The source is the Russian The-eBook.org forum and the original ReLaunch thread. Going back from the end of the thread, all earlier versions (all dropbox links) seem to not be available, just like 1.4.
Then there is ReLaunchX which supposedly takes up where the original 1.3.8 left off and renumbers the newer versions starting again with 1.0 (now at 2.x). The GitHub for ReLaunchX is here: https://github.com/Leszek111/ReLaunchX and the app is available on F-Droid: https://f-droid.org/en/packages/com.gacode.relaunchx/
You have many choices!
Edit: one more choice. Member @digixmax offers 1.4.3 here: https://forum.xda-developers.com/showpost.php?p=72246935&postcount=42
Thank you so much @nmyshkin !
You are a star
nmyshkin said:
There seem to be at least 3 ReLaunch forks. The original ends at 1.3.8 (the easiest one to find--Google is your friend). There is then the sequence you are asking about, moving from 1.4 to now 1.4.8. I've attached 1.4.8 below. Don't know anything about it. The source is the Russian The-eBook.org forum and the original ReLaunch thread. Going back from the end of the thread, all earlier versions (all dropbox links) seem to not be available, just like 1.4.
Then there is ReLaunchX which supposedly takes up where the original 1.3.8 left off and renumbers the newer versions starting again with 1.0 (now at 2.x). The GitHub for ReLaunchX is here: https://github.com/Leszek111/ReLaunchX and the app is available on F-Droid: https://f-droid.org/en/packages/com.gacode.relaunchx/
You have many choices!
Edit: one more choice. Member @digixmax offers 1.4.3 here: https://forum.xda-developers.com/showpost.php?p=72246935&postcount=42
Click to expand...
Click to collapse
marcoNST said:
Thank you so much @nmyshkin !
You are a star
Click to expand...
Click to collapse
I just rooted using NM and I am using the default system. ReLaunch seems to have a very barebones interface, and I wish I could do certain things (the two main ones is to toggle visibility of the statusbar at will (making any application full screen) using some button or button combination, and the other is to change orientation.
What benefits are there to using a new version?
Thanks!
Winston S. said:
I just rooted using NM and I am using the default system. ReLaunch seems to have a very barebones interface, and I wish I could do certain things (the two main ones is to toggle visibility of the statusbar at will (making any application full screen) using some button or button combination, and the other is to change orientation.
Thanks!
Click to expand...
Click to collapse
I don't think you can exercise much control over the visibility of the status bar--at least not in Android 2.1. App developers either choose full-screen as the default display mode or give a programmed option which regulates the size of the window in which the app is viewed (essentially covering the status bar). I'd like to be wrong about that and I'll keep looking around a little, but I am not hopeful.
Screen orientation is easily regulated with an app. Probably the best one for the NST is Rotation Locker (there's a copy attached to this post: https://forum.xda-developers.com/nook-touch/themes-apps/app-reading-button-menu-t3815212).
You could theoretically assign a hardware button to the app. All it does is bring up a small menu (Portrait, Landscape, Auto). A simple tap on your choice makes the change, but a long-press sets up a background service that forces the change, even when apps want to resist. You'll see a notification that the service is running. You really need this for the NST because it does not much care for being in landscape mode and many apps will try to escape back into portrait with only a single tap on landscape.
Unfortunately the app suffers from a problem common to many in that it was not designed with e-ink devices in mind. Colors were used in the menu system and they are such that you don't see anything but the menu boxes! I've given you the correct order above, from top to bottom in the menu. A better and more general solution is to slightly darken the background color on all NST menus. This makes most of the offending "invisible" menu choices at least somewhat visible. The change is effected by replacing about 30 images in framework-res.apk. Two sets of images were prepared by someone on the Russian e-book forum. One is lighter and the other darker, but both are darker than the originals. I use the lighter ones.
Alternatively, if you don't expect to be running a lot of apps with potentially unreadable settings or menus but you would like a simple orientation toggle to assign to a hardware button, I could probably just extract that portion from my Reading Now menu app and assemble it as a stand-alone. It still relies on the Rotation Locker app, but you'd never see or interact with the menu, just press a hardware button.
nmyshkin said:
I don't think you can exercise much control over the visibility of the status bar--at least not in Android 2.1. App developers either choose full-screen as the default display mode or give a programmed option which regulates the size of the window in which the app is viewed (essentially covering the status bar). I'd like to be wrong about that and I'll keep looking around a little, but I am not hopeful.
Screen orientation is easily regulated with an app. Probably the best one for the NST is Rotation Locker (there's a copy attached to this post: https://forum.xda-developers.com/nook-touch/themes-apps/app-reading-button-menu-t3815212).
You could theoretically assign a hardware button to the app. All it does is bring up a small menu (Portrait, Landscape, Auto). A simple tap on your choice makes the change, but a long-press sets up a background service that forces the change, even when apps want to resist. You'll see a notification that the service is running. You really need this for the NST because it does not much care for being in landscape mode and many apps will try to escape back into portrait with only a single tap on landscape.
Unfortunately the app suffers from a problem common to many in that it was not designed with e-ink devices in mind. Colors were used in the menu system and they are such that you don't see anything but the menu boxes! I've given you the correct order above, from top to bottom in the menu. A better and more general solution is to slightly darken the background color on all NST menus. This makes most of the offending "invisible" menu choices at least somewhat visible. The change is effected by replacing about 30 images in framework-res.apk. Two sets of images were prepared by someone on the Russian e-book forum. One is lighter and the other darker, but both are darker than the originals. I use the lighter ones.
Alternatively, if you don't expect to be running a lot of apps with potentially unreadable settings or menus but you would like a simple orientation toggle to assign to a hardware button, I could probably just extract that portion from my Reading Now menu app and assemble it as a stand-alone. It still relies on the Rotation Locker app, but you'd never see or interact with the menu, just press a hardware button.
Click to expand...
Click to collapse
You are correct about the status bar visibility, I think there is nothing you can do about it if any specific app forces that setting. There is a configuration setting for ReLaunch to not show the status bar, but even then PocketBook Reader will display it.
For the orientation right now I am resorting to starting APV PDF Viewer (which I have set to landscape,) and then starting PocketBook Reader. Because PocketBook doesn't force a specific setting, it will continue on Landscape until I go out and something else changes orientation to Portrait. Rotation Locker seems like the perfect solution to somewhat streamline orientation selection a bit more. Also, I think I'll manage by knowing which selection to press and not care about the lack of visibility of its menu.
Thank you for your kind offer to assemble that menu app with the toggle built in, but I'd hate you to spend time doing that. Instead, I'll investigate more and go through all the posts you have already provided! :good: