hi all,my diamond screen don´t start and no light nothing,but my pc connect,i changed the rom but nothing happen,it´s my screen dead or what
ths
the problem is the flex connector at the back of the display
give it to htc support, they'll fix it
it shouldn't be very costly
ths
ths ,i will try t change the display,it´s on the road to madrid
ths anyway
the lcd is fine!
its just the connector thats loose
Related
i just confused , my BA all function normal .
any problem in lcd. every myBA i shake screen like green light vibration or grainy on menu panel and color red is domination in center. but if BA freeze is nothing happen
how to fix this problem?
sory my english
Probably the phone flex cable or the LCD's flex cable.. (can be any other thing)
Mine got flicker when I slide the screen up(upper part of the phone), and going normal when put it back to Slide down. already change the flex cable (phone flex cable) and nothing changed, not change the lcd flex cable yet, seems the lcd flex cable fixed with the lcd..
Hey guys
a friend bought me xperia x1 phone from dubai (cuz it's cheaper there)
with no warranty but all attachments are included and x1 support card
whatever
the problem is
THE FLICKERING SCREEEEEEEN!!!
I barely notice these flickers in auto backlight adjustment enabled
but when i turn the backlight to 100% it's noticed more
some times when i open my mobile from shut down it flickers strongly and decreases till it reaches a small but noticable flickerss
it's annoying!!!!
what can i do???
is it a common) case???
when i googled for this problem i found that there's a lot of mobile phones with flickering screen,,,
am afraid that this screen is replica
i want to check the screen connector but i dont know how???
can any body help me with that issue
and if i opened my phone to check the connector will the warranty service center will notice that i opened this phone
thx
sorry for my english
Screen flicker??I don't know it..
I say you bought a fake phone. Never had the flicker and connector has nothing to do with it. Besides, if you have to ask how to check - don't.
my brother gave me the xperia,and he said its broken.the thing is,the phone actually works,but when i slide the keyboard out,my screen goes black.i would like to fix it.the phone works whitout problems,but sometimes i accidentaly slide it,and it goes black,and wifi loads again,blah,blah...so can anyone hhelp me??
if u slide the keyboard than the screen goes blank.. maybe the problem was on the cable flexible... just googling and serching how to reassamble the X1 than se the cable flexible maybe its lax... or if its broken just by the cable flexible and replace the old ones with the new ones.. hope this will help...
yes, sounds like a ribbon issue
read this for starters and follow the advice to search for some more details
gl
Hello ,
I am having a problem with my Sony Ericsson X1 , my screen the last days is black and i need to press many times the turn off button so i can turn on / off the backlight and work , but today its not working anymore this trick .... ! i took the battery off i put it after a bit time and still the same . Also i had a problem with my keyboard and screen when i put the keyboard down my screen wasnt going down also and was stacking in the normal way like having it close... !
Any1 could give me a hand , maybe any1 knows how much the screen problem will cost?
Thanks a lot.
It's a problem where the ribbon cable that connects the phone (in the keyboard bit) to the screen is worn and then it starts to have problems with the screen. In the end, for me at least, the screen wouldn't turn on at all. I just sent it to sony for a fix, and they said it was free.
That's what your problem sounds like considering the keyboard seems to be related to the screen
Hello!
I have a LG Optimus Black , and the touch function of the screen is not working anymore but the display shows a normally image at startup and I don't know what can I do except flashing it's firmware.
Can you give me some options to repair the device? The screen isn't broken, when I taked up from the computer's table, doesn't react anymore ( and I found the battery discharged )
Thank you!
Even after a reboot(battery pull) it doesn't respond?
You should take it to a service center.
FDN
Maybe there is a problem with the ribbon cable connecting the digitizer to the mainboard. I once saw this on my former Galaxy Ace. Since this is very tiny I would also advise you to take it to repair center - I broke my Ace when I tried to fix it myself...
I had had this problem too and I took my phone to service center,
they replaced the screen.
It appeared on my phone without reason , it's really a strange problem.