My tilt started flashing/blinking at times. I dont remember i have dropped it or exposed it to water/magnet or anything. i think i have installed some applications (incluing flash themes) and after that this problem is happening.
Now i disabled flash themes and still the problem happens. Power charge is proper (i tried different battery also). it flashes for a second and sits idle and this happens randomly like once in 10 mins or 15 mins or so.
Anybody faced similar problem or know solution for this? i tried soft reset also. nothing works.
I am using default ROM when i bought in US with ATT (3.57.502.2 WWE)
any help is appreciated.
Hard-Reset if not sure how the WIKI will tell you
Related
I've got big problems with my Kaiser,
Almost everytime it falls in Standby mode, i can't reactivate it with the On/Off button. But the green LED is still blinking.
i've got the original HTC ROM 1.56.407.3
Does anybody have same problems? Or has anybody a solution for that problem.
It really bugs to restart it 20 times a day...
change to a different rom
and which one?
Any one...
I know it doesn't help and not very informative, but any of them sounds like it'd be better than what you have now.
I'm quite new here and have no idea which rom is good and stable.
Are there newer original ROMs from HTC?
Or which one would you propose?
I wood prefer one in German
skyrysers said:
I've got big problems with my Kaiser,
Almost everytime it falls in Standby mode, i can't reactivate it with the On/Off button. But the green LED is still blinking.
i've got the original HTC ROM 1.56.407.3
Does anybody have same problems? Or has anybody a solution for that problem.
It really bugs to restart it 20 times a day...
Click to expand...
Click to collapse
if you want a stable rom try Sleuth's v1.1
is it in german?
Same happened to me some days ago... but I solved it with a hard reset. Now it works perfectly again.
Take a look at those 2 threads, maybe they help....
http://forum.xda-developers.com/showthread.php?t=339792&highlight=of+death
http://forum.xda-developers.com/showthread.php?t=332088&highlight=of+death
Soft Resets
Had the same problem, tried new ROM's, hard resets...etc..etc. Problem fixed by changing SIM card from a three (or four) year old sim to the latest available. Everything running perfectly now!
I'd agree, it's not the ROM. I'm using it since day 1 and haven't even needed a hard reset yet. I want to try Sleuth's but the stock is so stable I'm not feeling the need to jump. I'd check your SIM as mentioned and them maybe a hard reset and a carefull watch of what you install back on the phone to see if it's a rogue application.
Hey everyone, I had a recent issue (not sure if it's still there) and was wondering if anyone could shed some light on what's going on. Anyway here's what happened:
I have had my Diamond for almost 2 months, I flashed a new ROM cause the one I was using (Franlov V3) was running a bit slow, I used DIBB v1.33, flashed, hard-reset and it was working ok but then it froze (or was really sluggish) so I reseted, and the phone took the reset as a hardreset, weird stuff, when it booted it was incredibly sluggish, so I turned it off, when I turned it on, bam, another hardreset. And well it pretty much entered a hardreset cycle.
I thought it was a problem with DIBB's ROM so I changed to another ROM and whenever I reseted ,the phone hardreseted. And this has been going on with multiple ROMs.
I searched and found a possible solution: leave the phone overnight without battery then reflash HardSPL, Radio and ROM, I did that yesterday...and had the same issue, till I flashed Dutty's 3.6, the only problem now is that drop-down lists, don't drop down. Any help (so it doesn't happen again) would be really appreciated.
I have the same problem
¿Did you solve it?
aemilius said:
¿Did you solve it?
Click to expand...
Click to collapse
...I hope, he's found the solution --> http://forum.xda-developers.com/showthread.php?t=490182&highlight=strange+problem+solved&page=3
post#22
CU
Hi Guys,
I am facing a strange problem since a few weeks. My Blackstone sometime does not switch back on again when I press the Power Button after it was suspended(=NOT switched off).
The only way the get it running again is removing the battery and putting it in again. After that the device takes a really long time to boot. Stays at the Smart Device Screen (with ROM info displayed) for about 30 - 40 seconds.
This happened about 4 times the last 6 weeks.
All ROMs used were from LEO - all kind of different versions. It also happen with the newest one 3.2
SPLs: HSPL, HSPL 1.56, SPL 1.56
Did anyone else notice such a behavior? Do you think this is a sign of a Hardware problem, or could it be software related?
Greetings,
Tommi
got that often when i do something stupid with it ie installing some software wrongly.
ive had to hard reset it each time, but luckily i had sprite backup before that at some point. and it works then
posted twice
I believe my battery ran dead and i didnt notice, now my when you press the power button the blue o2 loading screen comes on then about 2 seconds later the device restarts and same thing over and over.
If i plug a an ac adpater in (i've tried 2 and an incar charger) the light ring goes up twice then then phone triggers a start up and gets stuck in the loop. I've tried leaving it in this loop for 10mins see if it would charge the battery but no luck.
I have tried doing a hard-reset 3 times now it says its done ok soon as i press vol up to boot it goes into the loop.
Is there anyway i can charge the battery if this is the case or is there another problem thats causing this?
Any help would be appreciated.
Are you sure the battery is dead?
If you left it in the loop for 10 mins I would have thought that it would flatten it such that it doesn't light up at all.
I know the battery was very low before it started doing this and i hadnt installed anything new in months.
Usualy on the o2 screen it shows red writing at the top and bottom, its not showing that right now if that means anything.
Its a stock o2 uk rom with no changes to the radio and official battery.
I've just installed the latest rom from the o2 website (keeping it stock incase i need to send it off to them) and still doing the reboot on startup thing.
Contacted o2 see what they say but if anyone else has any ideas im open to suggestions
i've got the same issue and the battery won't charge ...i suppose it could be a battery issue, but i'd be sure about it prior to buy a new battery..
Battery was fine, i sent the phone to the o2 repair centre got it back week later fixed
SMeK said:
Battery was fine, i sent the phone to the o2 repair centre got it back week later fixed
Click to expand...
Click to collapse
did you use a modified rom? ..i was told htc repairs only unmodified products, could you gimme more information about it?
No it was not a modified rom, default o2 xda ignito rom.
Me too!
I had the same issue. I tried soft-resets, hard-reset, swapping batteries with another phone (even tried warming the battery in my hands which was suggested somewhere!), reflashing a couple of different ROM's, including Shaks 4.30 and the latest Telstra ROM (2.07.841.2 WWE). I tried using MTTY to reflash the ROM, and reflashing using the DiamonCustomRUU.exe from the PC. (OliNex 1.40 SPL). All of the reflashes were in Bootloader mode (hold pwr and vol down) because I couldn't get it to the point of ActiveSync connection.
Nothing would work.
The winning step that bought me the joy (and relief) I was looking for was downgrading the radio from 1.09.25.23 to 1.00.25.05.
Also, I'm not sure if it is related, but I think the reset button under the stylus is stuffed because pressing it doesn't do anything.
Now I've escaped the reboot loop from hell, I'll run it for a few days before giving it back to my boss! If anyone's interested, I'll update you in a few days.
HD.
could you please tell me how you installed the radio, because when I use diamoncotumruu it stays at 0% and the finaly gives an error
yves_the_man said:
could you please tell me how you installed the radio, because when I use diamoncotumruu it stays at 0% and the finaly gives an error
Click to expand...
Click to collapse
I had to install the radio in Bootloader mode (hold pwr and vol down), but there was no issue with the install after doing this. Have you checked this thread? I don't know if that thread will help you fix your issue but it might be worth a look.
What exactly was the error message? Perhaps a search on that error message will help you.
HD.
I've tried it in bootloader mode, but it won't install...
the error number is 262. but that should be an active sync problem but I can't sync so I don't know what the problemm is
Not really on topic, but...
yves_the_man said:
I've tried it in bootloader mode, but it won't install...
the error number is 262. but that should be an active sync problem but I can't sync so I don't know what the problemm is
Click to expand...
Click to collapse
262 isn't an necessarily an ActiveSync problem, more of a connection problem. Try post 9 here. Or try uninstalling Active Sync altogether and installing radio and ROM via MTTY. Since it is a connection problem, you could even try a different USB cable.
But I suggest you post 262 queries here, here, here or here.
BTW, Are you using XP?
HD.
I'm not sure if it a freezing problem or it just won't accept any input
Basically after my Kaiser has been on charge overnight I will get around to using it and can't. What will happen is the screen & buttons will not work, although they can be used for a split second every 3 seconds.
After a reset everything is back to normal, so I'm not sure what the problem is, I don't have a lot of programs installed and only 1 has been install in the past month which is A2DP Today Toggle, so far I've un-installed it and left it again but I still have the problem.
Thanks for any help
I have a similar problem. In the morning i have to soft rest the phone for it to work. Issues started after 6.5 upgrade. There must a solution somewhere in here..........
Does a hard reset fix the problem? Does this happen with every ROM you've tried?
I have only stuck with the official rom, I bought it on 6.0 and then updated to 6.1 after it's release. A hard reset does fix it but some time after it will return, bear in mind this has never done it previously just about a month ago.
I guess it might be a issue with some program that is being installed