upgrade from spl 0.18 - Palm Treo 750 ROM Development

I just acquired a treo 750v.
I have read carefully the posts about hardspl and win 6.5 upgrade.
first, I need to upgrade my spl from 0.18 to 1.11 so that cheetah unlocker can run on my device. I did not find any tool about spl upgrade.
Where should i start looking ?
thx

lenzai said:
I just acquired a treo 750v.
I have read carefully the posts about hardspl and win 6.5 upgrade.
first, I need to upgrade my spl from 0.18 to 1.11 so that cheetah unlocker can run on my device. I did not find any tool about spl upgrade.
Where should i start looking ?
thx
Click to expand...
Click to collapse
Yea i have the same problem , if anyone could help us cuz i cannot start/update my OS on my Palm ... need a link & guide 4 this problem plz help

Do you guys mean to say the Hard-SPL sticky topic does not work for you? The file in that topic can still be downloaded (just tested it via Opera Mini), but if running that file does not work, reply here.

Related

Upgrading to Windows Mobile 6

I've currently got WM5 and want to upgrade to WM6.
I've read the ROM upgrade threads and have the latest versions already in my K-JAM.
Is it as simple now as installing WM6 or is there anything additional to do?
Thanks,
Dave
horrgakx said:
I've currently got WM5 and want to upgrade to WM6.
I've read the ROM upgrade threads and have the latest versions already in my K-JAM.
Is it as simple now as installing WM6 or is there anything additional to do?
Thanks,
Dave
Click to expand...
Click to collapse
Helloo
is a G3 or G4 ?
is CID locked ?
find the answers for this questions...., you can brick your device otherwise..
Thanks for the reply. Reading the Wiki I've found out that its a G3. The rest of the versions follow according to the startup screen. Apologies, I should have posted these originally (I intended to but got distracted).
IPC 2.16
SPC 2.16
GSM 2.07.10
OS 2.16.9.1
I'm unsure about the CID.
I've found this thread though and will have a good look at it;
http://forum.xda-developers.com/showthread.php?t=298613
Dave
I think you may want to read this one....its the one I used to SIM/CID unlock my G3
http://forum.xda-developers.com/showthread.php?t=285435
Good luck...its not too difficult to do....its so easy "even a caveman can do it"
And then read this:
http://forum.xda-developers.com/showthread.php?t=297762
Thanks. I've decided to leave it well alone.
Dave

didnt find any solutions for this problem in any thread

aaammmm
i have a wizard but till now i couldnt upgrade my phone using any of ROMs available here for WM 2006
my IPL & SPL are 2.16
i unlocked the CID with no problems
but when i start the upgrading it till me : u need newer NPF file
plzzz help me i really wanna upgrade 2006 looks soo beautifull
thanks in advance
First -- which WM6 ROM are you having trouble installing??
If you'll read the Wizard Mobile 6 forums, just about all the threads will advise you to flash the T-Mobile 2.26 for a strong 2.26 base before flashing to a WM6 ROM.
ok first things first
here is my device full information
ROM version 2.16.9.1 WWE
ROM date 2/6/06
radio version 02.07.1
protocol version 413.1.03
extROM version 2.16.9.102
model No WIZA200
microsoft windows mobile version 5 OS 5.1.195 build 14847.2.0.0
IPL 2.26
SPL 2.26
GSM 02.07.10
anything u want to know more just ask
------------------------------------------
for ur Q i have tried to flash faria the real thing & the new pandora
im not sure of what u mean by t-mobile but tell me how i can flash to a stronger base as u said & i'll try
thnx for the replies
From your last post, it looks like you already have a IPL/SPL of 2.26. Your initial post reported it to be 2.16. It also appears that you have a G3 chip, so there shouldn't be any problems in flashing any of the WM6 ROMs.
Try maybe a different ROM. I'm using the X-Plore 1.1 by anchillus and have been using it on my 8125 longer than any other one I've tried. In fact, my Wizard is starting to feel neglected. . .
From all the information you've given, you should be good to go with ANY ROM.
will what supposed to be inst happening
inst there anyone else that can suggest other things
also can anyone explain what is this NBF file & where can i get a newer one as the update tool is asking
thanx newbie2 for ur replies
i ask the other pro members to help me too
ok new update regarding my situation
i tried x-plore 1.1 as what newbie2 advised & it accepted the update
after its done there was no change it was still 2005
but i noticed that the when it started up the 2006 flash screen was there
i know that when this happened it mean that i didnt unlock the device but i would say that i did twice & in both of them the wizard started on its own
is there a signal that can make me be more sure that it was unlocked
still waiting for advise ppl
thnx for this forum again for every thing they do for us members
doomerxx said:
after its done there was no change it was still 2005
Click to expand...
Click to collapse
Yes I know the answer you're.... this is always the case when you're.... I'm certain you're.... CID-Locked.
You can only succesfully CID-unlock you're device from buttons 1.x rom! Lokiwiz can tell you it unlocked succesfully, but it didn't! Make sure you're not confusing CID from SIM-unlock. Follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=298613
Make sure you're not confusing CID from SIM-unlock.
Click to expand...
Click to collapse
im not but i tried the old unlock thread i didnt know it was updated
now i was able to uprade
thank u all

Help!How can I upgrad WM6 from WM2003?

How can I upgrad WM6 from WM2003 use ROM Kitchen Utilities? thanks
Some one tell me that's no way
My device is XV6600
im afraid there's no WM6 for BlueAngel yet...
if you wish to upgrade your system to WM5 - please read wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
michaldu said:
im afraid there's no WM6 for BlueAngel yet...
if you wish to upgrade your system to WM5 - please read wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
Click to expand...
Click to collapse
Thank you michaldu
I am using XV6600 (CDMA version) too. Is there any ROM of WM5 whichi can make it work (both PPC and PHONE)?
well you have to stop asking the same question all over the forums and read a bit

i want to upgrade from WM 5 to WM 6

Hi,
I got a unlock T-mobile MDA Vario with a WM5 i wanted to upgrade it to WM6 in Dutch version, with the newest Rom etc etc..
This is the Extended Image version that i use now: 2.21.2.108
Where can i find the Dutch T-mobile version WM6 ?
And how can i upgrade it?
wiki......
Already Fixed !!
OK
Onderbroekie said:
Already Fixed !!
Click to expand...
Click to collapse
ok lets see, with your info updated on your signature we can make too much...
On this forum... enter on a thread called "a little tutorial" download everything you need ... Button ROM, wizard Love, lokywiz, your Rom in DUTCH and so important... an original ROM like tmo 2.26 or Tmo 3.08 and the radio of your wish ok?
You have a G3 wizard so the process will be in that thread... if you dont have or understand something ask there or here, dont do anything untill you get all the info and tools ok? read a lot and ask so much more...
to Dutch I recomend you the New Wizard ROM wm6.1 by GULLUM diamond with throttlelauncher in 13 languajes... we will keep in touch see you soon.

[q] pls both mods and kaiser pro's should help to solve this problem

Pls help me guys. I have pof's hardspl v1 installed on my htc tytn ii with windows mobile 6.1, in pof's thread i read that overwriting the hardspl requires sspl but the link he posted for sspl is not walking. Pls how do i upgrade to hardspl v3.x cos most of these wm 6.1 new roms support only hardspl v3.x. Pls mods dont delete my thread.
sheyhu said:
Pls help me guys. I have pof's hardspl v1 installed on my htc tytn ii with windows mobile 6.1, in pof's thread i read that overwriting the hardspl requires sspl but the link he posted for sspl is not walking. Pls how do i upgrade to hardspl v3.x cos most of these wm 6.1 new roms support only hardspl v3.x. Pls mods dont delete my thread.
Click to expand...
Click to collapse
You created 2 threads, why shouldn't we delete?
Your other thread has been deleted.

Categories

Resources