I've read several threads on this but the results still arent clear. Some say it works, but only with mic, some say it breaks GPS, some say it doesnt work on WM6.5.
My question is:
Is there any tool available to connect my Raphael WM6.5 using WIFI to a SIP provider (not skype!), and also use the buildin audio / microphone like a regular phone, without breaking any stuff?
I'm willing to pay for this software!
WM6.5 Raphael
ROM: 5.11.502.2 WWE
Rom date: 10/25/09
Radio: 1.11.25.01
Model No: HTC Touch Pro t7272
ce os 5.2.23081 build: 23081.5.3.0)
CPU: QUALCOMM(R) 7201A 528 mhz
RAM: 288MB
I've used Fring to do just that and it worked fine. There's a setting to use the regular earpeice. If it matters, the last time I installed/used Fring was a few versions of the Energy ROM ago - but it did work fine for me and didn't break anything.
you can use Audio Router application to forward the audio to your ear piece ( not the loud speaker ) or bluetooth hand free if available .
for the SIP application, you can use old SIP dialers like X-PDA, Fring or ..... . there are many sip dialers that u can find if u do the search.
Another program for transferring the audio to the earpiece is Audioswitch and you can use it with mortscript to make the process automatic when ever u run your app.
Search in the forum , there are many threats about this.
Tnx
Thunder
Thanks a lot guys! How does this work with Fring? Because after i install it i need to provide a fring username and password instead of my office sip server address and username / password..
Found the answer, there's some hidden tabs there when u use wm6.5 on raphael.
Its not very stable though Sound quality is bad even when i'm on top of my 108mbit wifi router.
Related
Couple of questions about voice-dialing in WM5.
I purchased MS Voice Command 1.5 and loved it on 2003SE, but:
1) Does it work with the latest WM5 ROMs?
2) Is there a way to initiate a command from a BT headset?
Not concerning MS VC:
3) What other options are available, and what are the best?
Thanks!
1. At the moment MS Voice Command 1.5 does not work in the new WM5 AKU ROMs (at least it didn't last time I tried!!)
Once you install the app it runs once then states there's been an error and refuses to run again!
2. Within WM2003SE if you have the A2DP profile set with your headset (assuming it's stereo?) then you can initiate a call/command via BT, I used it quite a bit...
3. Alternatives are the following:
Cyberon Voice Dialler (I don't like this as you have to record all the voice tags as there is no speech recognition engine.
VITO Voice2Go/VITO VoiceDialler (I liked this in its previous incarnation but haven't tried the new version with 2K3 or WM5)
If you search the forum for Voice Command you'll find plenty of threads about getting these apps working, and working with BT...
Thanks for the response. I'll search the forums and see if there is anything else that I can find.
FYI, I just have a headset that supports handsfree (Jabra JX 10).
I love cyberion voice commander just becaues it doesn't make all the voicetags itself. I think this is why the device is called a pda with the P for Personal, everyone his/her own opinion.
Since english is not my native language and voicecommander always want to make it sound as english it's not good for me.
And suggsjc i love your signature "If the world didn't suck, we would all fall off..." . I borrowed it several times now to friends of mine, interpreting it as a positive thought
Well I guess to each their own. I (P)ersonally liked it having all of the tags created for me. I could find a contact that I rarely used (and wouldn't have created a tag for) with just using voice commands. But having the choice is a good thing.
Despite the glitches with some software in WM5, overall I am very pleased. Much nicer and more refined than 2003SE.
Glad to hear that my sig is popular
I thought I would start a new thread as I could not find any links to using VOIP on the wing with PdaViet ROM. The ROM is considerably faster compared to original TMbobile and I am wondering if VOIP would work. I am also wondering if it would work with the new Tmobile VOIP service....it may be cheaper to use another VOIP provider....
After some reading came across two files that need to be installed - both are attached. One is WM6VOIP.cab for installing the reqd voip files in \windows directory (omitted in the ROM). The other is the setupvoip.cab (Schap) which then makes it easy for you to input your VOIP provider SIP settings. I was able to install both successfully. The today screen will show you Internet Calling as Available....
For some reason I am unable to dial out using the dialer provided in the PDAViet ROM. Is there a special dialer required? Will be nice if anybody else with a Herald / PDAViet can also attempt this.... Based on what I see both programs are uninstalled easily.
All,
I was wondering if the built in WM6 Voip client can be activated or be put in if it does not yet exist in the WM6 builds.....
Currently I use Fring for my Voip calls, but I would really like to use the built in client for better native support.
Other WM Voip clients are also welcome....
Cheers,
HJ
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi Mrabie,
Are you still using VOIP? Please confirm if it used the standard dial pad and if it also uses the front speaker?
Cheers!
There's nothing for the Kaiser that uses the front speaker yet.
Do we know what this is? I assume you mean Voice Over IP (WM6 Built in) currently uses the loud speaker.
One would assume the normal phone speaker could be used (since my old Hermes could).
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Same here, works excellent!
has anyone managed to get the native voip client to work on the kaiser?
I can receive a call but not make one.
when trying to make a call ; I get the error "Network service is not available. Try again later."
sometimes it has worked....
Was working perfectly fine on my hermes (imate jasjam)
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Great!
I have loaded the 2 cabs and have made some minor progress.
If i reboot the Tytn II is says connected for a moment then it goes to 'searching'. This is over the home wifi network.
When i first loaded the cabs and tried to initiate a call, it did show my voip provider in the dial pad, but now i cant replicate that to test it actually works.
What should i do?
Cheers
Edit: it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
GLO said:
it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
Click to expand...
Click to collapse
tap on the name , it needs to show as "selected".
let us know if it works for you.
I can only receive calls.
interestingly, nothing ever arrive on the voip server when i try to make a call; i run my own voip server (asterisk) , and no packet ever make it to the server from the windows mobile device...
warning, numbers must be numeric only, no + or # etc...
Do you mean to select it from the 'Today screen'
If that is what you mean, then when i click on it it takes me to the phone settings tab for internet calling.
Mind you, in that tab it states:
Internet Calling
To set the calling network for your next call, select BBPglobal (my Voip account) on the Today screen.
options: whenever available
Only if cellular is not available
Never
I have it set to whenever available and have also enabled GRS/GSM calls as per SIP config 2.01.
Whilst it now always shows that it is available, i dont see how else i can select it.
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
jyavenard said:
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
Click to expand...
Click to collapse
I move the today screen curser to highlight the voip plugin, but nothing happens when i hit OK or press the big silver button in the middle.
Regarding the SIP server sip2.BBPglobal.com does support g711. Well i was thinking that the phone simply makes a connection to the wireless router (Asus WL500gP running DD-WRT v23sp2) and that would be it. I could be wrong but i think this way simply because i replicated the SIP settings from my ATA (Linksys SPA2102).
Plus i would imaging that when using the VOIP over 3G that it connects with the same settings from the SipConfigTool1.02
Have i missed the boat somehow?
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Would be also interresting for me.
I've tested 3 Types of VOIP software.
- Fring => Comes out of the loudspeaker
- Pocket Talk => Comes out of the loudspeaker
- Prop. WM6 => Could not connect.
Kind Regards
Seppl
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi,
the first link is about Hermes?! I tried it, but it creates two today plugin...why?!
Is it possible that on the latest Kaiser native ROM some parts of WM&VoIP.CAP is already installed even if there is no Internet Tab under Pgone Settings?
Second: I had universal befor and a cooked rom, and when I clicked on the today plugin I could select or unselect voip for calling. With this cab instead, if I click on the today plugin, I enter into Start->Settings->Phone->Internet.
Third: I looked at ftp://ftp.xda-developers.com/Kaiser/VoIP/ and there is a SleuthKaiserVoIP.cab...what is it?? Maybe the WM6VoIP.cab versio for Kaiser?
monakh said:
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
Click to expand...
Click to collapse
I get the same problem using PocketTalk!
Stefano
snyfer said:
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Click to expand...
Click to collapse
How many versions are there?
Codec ???
What codecs are supported by the built in VOIP? Maybe the issue of not able to make a call could be codec related like in any other VOIP softwares.
- TKN
Hy Guys,
I used a GPS Software for Smartphone name NAVIGON Mob. Nav. 6.5 on my HTC S620 => it works without problems
This GPS Software is ok with HTC S710 but not yet with S730 (as this device is brand new)..
I've tryed the combination (HTCS730 - MN 6.5) : it works for fast research (proximities like gas pump or restaurant) but its goes down with classical researchs (too long) => the program stop !
My problem is with memory on this device HTC S730
I've maximum 17 000 to 18 000 Kb free at the best moments.. and I've installed no other software..
I've done a advanced test of my RAM thats shows that some files (hidden files) took much memory.. (like video telephony, listening ports) but I don't want to use it.. (I would prefer to hide them in order to make my GPS soft work )
So who can tell me how to dismantle some WM6 files/process in order to win some KB for my GPS ?
Thanks in advance for your help
Jeff from Belgium
HTC S730
Navigon Mobile Navigator 6.5. (for Smartphones)
External GPS Module LEADTEK Bluetooth
Carkit Parrot Minikit 3.1
there is a wiki on that. go read it man
ok. Thanks for that answer. The second question would be, where to find this wiki?
SamuelTee said:
ok. Thanks for that answer. The second question would be, where to find this wiki?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Windows_Mobile_6_Standard
I am looking for Mobile navigator 6.5 for Smartphone all over the internet. I have latest maps, but I can't find software for my S710. Could you share?
thanks
Hello again,
As I mentioned in a previous thread, I’m due to upgrade my handset in the coming weeks from an N95 to the Touch Diamond (MDA Compact 4)... I have some really good apps on the N95 which I rely on a lot. I was wondering if anyone knew of any WM6.1 alternatives to the following apps...
Nokia Internet Radio
http://europe.nokia.com/A4668051
Hundreds of streaming radio stations over WiFi or HSDPA
Shazam ID
http://www.shazam.com/music/portal/page/default/template/pages/p/shazam_id.html
Music track identification - the app records a sample of the track and tells you the name and artist via data connection WiFi or HSDPA.
Nokia Sports Tracker
http://www.nokia.com/A4388200
GPS Tracking of my sports activity (running / cycling etc) routes viewable in google earth via KML file.
Nokia Conversation
http://www.nokia.com/A4568203
View text messages listed by contact as opposed to going to inbox and sent items separately
I've already checked my other key apps:
Shozu
JoikuSpot
Route 66
And they all appear to support HTC devices such as the Cruise and the Kaiser etc, so I should be ok there.
Any help on this would be greatly appreciated - not sure if i should of used a different forum for this really.... if a mod feels ti should be moved please go ahead
Garry
1) the original wm 6.1 text messaging shows you both the send and received at the same time and you can also see them while you r typing so you could reply back to the received questions
2) there is also a program for internet radio on the htc, i have used it and it is perfect. it think it is spb radio. check it out
Excellent, thats a good start Thanks!
Anyone have any alternatives to Shazam and Sports Tracker?
Alternative for sportstracker is RUNGPS
Ah sweet! Thanks lappie!!
after some searching i found tthese....theres probably better ones but the results looked promising:
http://www.mobilemarketingmagazine.co.uk/2006/04/shazam_for_wind.html
http://www.getjar.com/products/12049/InetToolsTrackID
http://thinkabdul.com/2007/06/17/fr...t-album-info-of-recorded-music-clipsongsound/
Another nice Symbian application is Nokia's Lifeblog, overall due to its ability to get synchronised with the PC client... Is there any equivalent in the PPC world?
billybobjones said:
after some searching i found tthese....theres probably better ones but the results looked promising:
http://www.mobilemarketingmagazine.co.uk/2006/04/shazam_for_wind.html
http://www.getjar.com/products/12049/InetToolsTrackID
http://thinkabdul.com/2007/06/17/fr...t-album-info-of-recorded-music-clipsongsound/
Click to expand...
Click to collapse
Thats brilliant, thank you very much
Ya truly something like Nokia Lifeblog in PPC will be truely appriciated..
New here and also looking into moving off Symbian and over to WM... scary stuff ;-)
We do a lot of geocaching and having Geocache Navigator installed on the N95 is great (when a phone signal is present of course) to find cache's close by or check on cache details without having to take printed pages along. It will also guide you via a compass and bearing to the Lat Long location of the cache...
Any apps specifically for geocacher's that will interact with the geocahce web site / data base ?
cheers
Shazam ID works on Diamond
I have Shazam ID working on the Diamond. One problem.... I have to reset the Diamond each time I use the program. For some reason it will not shutdown properly because it is not made for a touch phone. Maybe someone knows how to use it better???
[email protected] said:
I have Shazam ID working on the Diamond. One problem.... I have to reset the Diamond each time I use the program. For some reason it will not shutdown properly because it is not made for a touch phone. Maybe someone knows how to use it better???
Click to expand...
Click to collapse
the version you are using (musidid) looks like absolute crap on the VGA screen. very distorted. Its so sad there is no decent version of shazam on windows mobile - I used to use it all the time.
gazzrenn said:
Hello again,
Nokia Internet Radio
http://europe.nokia.com/A4668051
Hundreds of streaming radio stations over WiFi or HSDPA
Click to expand...
Click to collapse
I'm developing the Media Connect which recense the differents stream per country. The French is already released. The Dutch version will come soon (today maybe).
darthbane2k said:
the version you are using (musidid) looks like absolute crap on the VGA screen. very distorted. Its so sad there is no decent version of shazam on windows mobile - I used to use it all the time.
Click to expand...
Click to collapse
Tried with ForceHires?