Database Develop

Trying to learn ADB functions! Need some help!

I am trying to learn how to use ADB, so I can find the cause of a problem I am having on every 2.xx Rom I have tried, and I have tried them all!
So take a look at the screen shot, and you can see it finds my phone. For some reason thats as far as I have gotten, been screwing with it for 2 days but alas I have to ask!
Thanks for any help you can be!
Roman

OK, at a quick glance....
Instead of just typing "logcat", try "adb logcat". I think you'll have better luck.
Still looking through the rest, will edit in a few minutes.
EDIT 1: Don't actually put the "#" or the "$" on your command line. Those are prompts that the shell presents to you, not something you're supposed to type.
EDIT 2: Add the sdk\tools directory to your path. It will make your life much easier. You can get away with just doing a "cd" to that directory, but in the long run things will be much easier if you just put it in your path.
EDIT 3: "Operation not permitted"????? That command should have worked. Have you rooted your phone yet?

do adb "insert command here" logcat push pull install etc...

Cool thanks for the help subliminalurge, I think I got it now!
Now to start my bluetooth headphones with 1.5 and grab a log, then load up 2.1 and grab a log and see what the HELL is wrong!
Thanks again!

One last question, is it possible to save a whole string from CMD!
Also how do you do a dalvik wipe?
These are the 2 commands I have! Not sure if either one work or not!
DALVIK WIPE:
adb remount
adb shell
# cd /system/sd/dalvik-cache
# rm *
adb reboot recovery
adb shell mount /data
adb shell rm -r /data/dalvik-cache

I havent used adb since rooting my g1, since the release of the flashrec method.
Heres my noob question
Can terminal emulator do the same things as adb?
The only thing id ever use adb for is to push/pull, and i just use root explorer for that.
Jesus, youd think i became a senior just by spamming...

Terminal Emulator can not do the same thing as ADB. ADB is Android Developer Bridge (bridge as in computer to phone connection). Terminal Emulator, if you know Linux terms, emulates a Linux terminal on the phone... so, if you do "adb shell", you'll have the same commands as you would in terminal emulator... sorry I'm confusing

mrinehart93 said:
Terminal Emulator can not do the same thing as ADB. ADB is Android Developer Bridge (bridge as in computer to phone connection). Terminal Emulator, if you know Linux terms, emulates a Linux terminal on the phone... so, if you do "adb shell", you'll have the same commands as you would in terminal emulator... sorry I'm confusing
Click to expand...
Click to collapse
Lol i see what you mean.
You need adb to theme, dont you?
Windows man, through and through
(oh the irony, of being such an android patron...)

Terminal Emulator??? Access "adb shell"???

how do i use the terminal emulator app to access adb shell?

adb shell is only used when you're on a computer, like when using android sdk tools. When you use the terminal emulator you use different commands try This Link for some help using the terminal emulator, they're basically the same as linux commands.
also this should be in the Q&A section

lol the terminal is the 'shell'
if you're running a terminal right on the phone, then consider yourself already @root when you're typing in commands.

foil said:
lol the terminal is the 'shell'
if you're running a terminal right on the phone, then consider yourself already @root when you're typing in commands.
Click to expand...
Click to collapse
Sort of. You are a user, but not "root". To become superuser you have to use the SU command.
/ $ su
~ # |
Click to expand...
Click to collapse
I'm sorry if I'm nitpicking here. Your original point remains true. You don't have to use ADB at that point to run commands. You run the command without ADB right in the terminal.

subcypher said:
Sort of. You are a user, but not "root". To become superuser you have to use the SU command.
I'm sorry if I'm nitpicking here. Your original point remains true. You don't have to use ADB at that point to run commands. You run the command without ADB right in the terminal.
Click to expand...
Click to collapse
No, you're fine. I was just assuming that he was already rooted, but you're right - it's a regular user account unless you change to superuser.

in order to do what you probably want you will have to type su. It should then ask for SU permission and then you should gey
Code:
#
.

hello everyone, idk if im in the wrong place, but im trying to connect my non rooted phone to my rooted tablet with terminal emulator.Is there a way for me to use adb because it worked with my previous phone...its not working and isn't showing any device when i input "adb devices"...Can anyone help me please, help would be greatly appreciated ?(btw usb debugging is enabled on my phone)

[Q] How did I screw up the "ls" command in adb shell?

I don't know how I did it. I don't even know if it's a windows 7 thing, or a adb shell thing. But...
When I open adb shell and enter the "ls" or "ls -l" command, it returns the name of the file/dir in a strange format. Instead of just the name like "sdcard" I get:
<-[1;34msdcard<-[0m
I'm pretty sure it didn't always do this, so I must have enabled a switch somewhere (or I'm misusing the "ls" command). I do not have this problem with Terminal Emulator on the Captivate itself... just when using ADB shell on a Windows 7 machine. How do I turn this off? Any help would be greatly appreciated.
Thanks!

dc41 said:
I don't know how I did it. I don't even know if it's a windows 7 thing, or a adb shell thing. But...
When I open adb shell and enter the "ls" or "ls -l" command, it returns the name of the file/dir in a strange format. Instead of just the name like "sdcard" I get:
<-[1;34msdcard<-[0m
I'm pretty sure it didn't always do this, so I must have enabled a switch somewhere (or I'm misusing the "ls" command). I do not have this problem with Terminal Emulator on the Captivate itself... just when using ADB shell on a Windows 7 machine. How do I turn this off? Any help would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
ugh, this isn't garbage information or a mistake. this is windows command prompt (which isn't a proper terminal emulator) not being able to deciper the color coding techniques used in *NIX shells.
all these odd numbers are are simply color coding to "prettify" the shell if you're using a *NIX shell

Kaik541 said:
ugh, this isn't garbage information or a mistake. this is windows command prompt (which isn't a proper terminal emulator) not being able to deciper the color coding techniques used in *NIX shells.
all these odd numbers are are simply color coding to "prettify" the shell if you're using a *NIX shell
Click to expand...
Click to collapse
Thanks for the info! Now that I know what's going on, I should be able to find solution on the web.
Thanks!

dc41 said:
I don't know how I did it. I don't even know if it's a windows 7 thing, or a adb shell thing. But...
When I open adb shell and enter the "ls" or "ls -l" command, it returns the name of the file/dir in a strange format. Instead of just the name like "sdcard" I get:
<-[1;34msdcard<-[0m
I'm pretty sure it didn't always do this, so I must have enabled a switch somewhere (or I'm misusing the "ls" command). I do not have this problem with Terminal Emulator on the Captivate itself... just when using ADB shell on a Windows 7 machine. How do I turn this off? Any help would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
I've never had this happen when I use the adb shell on my Win7 machine. Which distro are you using? I have Home Premium x64.

miztaken1312 said:
I've never had this happen when I use the adb shell on my Win7 machine. Which distro are you using? I have Home Premium x64.
Click to expand...
Click to collapse
Ultimate 64, but like I said, it wasn't always like this. Some point in the lady week I must have changed a setting or something. Now I just have to figure out what I did and how to undo it.

I am guessing you switched ROMs? Seems to be the color setting in some of the ROMs on the LS command. It is not a windows bug, any terminal/shell that doesn't support colored directory/file names will give you this behavior.
See this thread for a fix:
http://forum.xda-developers.com/showthread.php?p=7714491

I have been having this issue since I upgraded to JH3 and SRE 1.2.1a (which included a new busybox 1.17.1 and proper symbolic links). SRE 1.2.1a also remove the stock ls command. I did not start looking into fixing it until tonight. Setting an alias for every adb shell session is annoying. Android does not include any of the profile start scripts like linux does or we would be able to stick an alias in some place like a .bashrc or /etc/bashrc.
Here is a permanent solution. I normally have a permanent alias setup on my linux machines with the switches below, you can modify the switches to your liking.
create a file in notepad with the following:
"ls -alh --color=never [email protected]" do not include the quotes.
Note the switches I am using:
a = show all files including hidden (the ones that start with a "." as a prefix on the name)
l = show files in long listing format/layout
h = show file size in human readable format eg and 1k instead of 1000.
Save the file as "ll" without an extension. You can use another name if you wish.
Use adb to push the file into /sdcard then adb shell to copy it to /system/xbin or copy via root explorer.
#assuming ll is in your SDK tools folder - move to sdcard
adb push ll /sdcard
#move to xbin folder
adb shell
su
mv /sdcard/ll /system/xbin/ll
I didn't touch the permissions (its working with -rw-rwxr-x) but just in case you can set permissions on the file.
chmod 755 ll
I rebooted my phone and I was still good to go using "ll" from adb shell.
adb shell ll
or adb shell
$ll
enjoy.

Mine does the same, looks nice when I am using on Ubuntu. I had flashed JH3 + SRE 1.2.1a also.
Did you try using the "dir" command? I think it comes with busybox 1.7.1. That one outputs fine for me when I am using the cmd prompt. Only little quirk is that I have to remember not to use ls when logged on Win7.

color codes were removed in SRE 1.2.2a: http://forum.xda-developers.com/showthread.php?t=751934

tikidroid said:
I have been having this issue since I upgraded to JH3 and SRE 1.2.1a (which included a new busybox 1.17.1 and proper symbolic links). SRE
Click to expand...
Click to collapse
Your fix worked perfectly for me!
Thanks!

tikidroid said:
Here is a permanent solution. I normally have a permanent alias setup on my linux machines with the switches below, you can modify the switches to your liking.
create a file in notepad with the following:
"ls -alh --color=never [email protected]" do not include the quotes.
Click to expand...
Click to collapse
Ahhh.... thank you so much for this post. This has been driving me crazy for a few hours, and I almost considered putting an alias to ll in init.rc (but I much prefer this less invasive method)

Useful workaround, thanks. Still needed, some two years later!

[Q] Please help me use adb to root JI6 on a mac!!

I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!

Ok, so if you can see your phone through adb, then you are definitely on the right track. Unfortunately, I'm not really familiar with OS X anymore so I'm not quite sure how to do it. Just sit tight for now until someone who does use a Mac, or has more of a clue then I do can help you out.
But seriously, don't pull your hair out. It won't stay on your head forever ya know...

Edit: oops, just saw this is JI6 (Froyo) not JF6, so I can't help you, but here is a general overview:
from terminal inside Android sdk main directory:
tools/adb devices -> list all devices connected that ADB can see
tools/adb shell -> gets a normal user shell on your phone
tools/adb reboot recovery -> reboots into recovery mode, suitable for update.zip root method
--------------------------------
Place the root update.zip on internal sdcard.
from terminal inside Android sdk directory:
tools/adb reboot recovery
Select the update software option, and you will be done.

laxwillsch said:
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Click to expand...
Click to collapse
Start simple:
If you open a terminal on the mac, and go to your android SDK tools folder; what happens when you type ADB shell?
Or if you type any of the ADB push commands?
You need to give more detail around what you are seeing for us to help you.

Ok so if I am in terminal and i type in my /android-sdk-mac_x86/tools nothing happens and it just says /android-sdk-mac_x86/tools is a directory. But if I type the same but with /tools/abd it opens the abd command lines, like how to write code. Then when I try to "adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin"
it says "-bash: adb: command not found"
however when I type laxwillsch$ /android-sdk-mac_x86/tools/adb shell
it does give me the drop down $
but when I then try to write the next line of code "chmod 0755 rageagainstthecage-arm5.bin"
it says "chmod: rageagainstthecage-arm5.bin: No such file or directory"
I am stumped I am beginning to think i need to buy a pc as I am very interested in android development and want to learn more, but it seems all the tutorials are run assuming you are on a PC
EDIT** I have downloaded the android SDK started pack, and the 2.2 root pack and they are all in my /android-sdk-mac_x86/tools folder that is directly on my Macintosh HD for simplicity

Do you know how to change directories (cd command)?
The problem is that you are trying to work in one directory, but all your tools are in another.
So change directories to the tools directory:
cd /android-sdk-mac_x86/tools/
now run your adb commands - you may have to type ./adb to tell your mac to look in the current directory for the adb command (that is what ./ means "start here")
Also, try to understand what is happening so you can more easily troubleshoot: chmod is a command to change permissions, and you are running it on the phone. If you can't push the file to the phone, then you can change it's permisssions. I guess you never got rageagainstthecage on the phone, so there is no way to chmod it.
If you can't do this on a mac, a PC is not easier. I use both, and like both, but you need to learn basic commands first - they apply to the mac terminal and the windows cmd prompt.
Getting root means moving in and out of the phone - adb shell - puts you in a terminal on the phone. So you really need to understand cd (change directory); pwd (present working directory - shows you where you are); cp (copy); and know your current path - what the ./ does.
I hope this helps, not trying to sound condescending - maybe practice a linux terminal tutorial would help

Thanks so much, I am at school right now and cant test out all that but you are really helping me understand all this! I will post tonight and let you know how it goes. again thank you

ok so i dont have my usb cable with me but I was playing around with the commands that you suggested and ureka! i finally got to a point where it says "h70-33-65-19:tools laxwillsch$" thats a first! and when i type pwd it shows "/android-sdk-mac_x86/tools" so that means I am working out of the right directory right? and from here I enable usb debugging connect my phone then just copy and paste the codes from the thread correct?

yes, it sounds like you are on the right track. But take it nice and slow when you follow the steps. It is very important that the commands are entered exactly as you see them.
Also, one step tells you to wait for something to run and kick you out of ADB - wait just like it says - takes about 45 seconds but feels like forever.
If you are in the tools directory - just by typing "adb" no quotes will give you whole page of adb commands - if you get a "command not found", then you need to add the ./ and make it ./adb
Hope this helps and again, read the commands step by step a couple times first so you understand what is happening.
In a nutsell, you push the rage file;
change its permissions, run it;
get kicked out of ADB and then open a new ADB shell;
you are now root;
remount the system partition to give you write access when it reboots;
reboot;
push over some files;
change permissions on files you pushed;
reboot;
Some things to know - SU is a command for gaining root access; when you use SU your prompt changes (in adb shell) from $ to #
If you are succesful you should see the SuperUser app listed in your apps.

Done and Done just rooted successfully couldnt have done it without you! thanks so much

[Q] output of 'adb devices'

All,
I follow the http://forum.xda-developers.com/showthread.php?t=532719 to setup the adb. Here is my output:
D:\>cd D:\Program Files\Android\android-sdk-windows
D:\Program Files\Android\android-sdk-windows>cd platform-tools
D:\Program Files\Android\android-sdk-windows\platform-tools>adb devices
List of devices attached
I89613ba062a device
D:\Program Files\Android\android-sdk-windows\platform-tools>adb shell
$
Does the output look correct to you? Note that I got '$' instead of '#' prompt, is that ok?
My PC assign two drive letters for the phone's SDs. The phone is a Samsung I896(from Rogers)
I have installed the latest JDK 6 and the latest Android SDK from the respective main site.
thanks,

That looks to be correct. The $ sign means you are running the standard shell. The get to the #, you need to typ 'su' without ticks. Then make sure you allow that on your phone for superuser priviledges. Now you will be the root and you will see the # prompt.
My comptuer also gives two drive letters. One for the internal, the other for the external SD card. However in shell when you cd /sdcard, I believe it goes to the internal card.

Cappy is found by adb and yes the $ is what you should see - so looks good

trekie86 said:
... The $ sign means you are running the standard shell. The get to the #, you need to typ 'su' without ticks. Then make sure you allow that on your phone for superuser priviledges. Now you will be the root and you will see the # prompt...
Click to expand...
Click to collapse
A followup question, I type the su and got the following:
su: not found
does this mean that I need to 'root' the unit first before getting the '#' prompt?
sorry for the noob question

cheve said:
A followup question, I type the su and got the following:
su: not found
does this mean that I need to 'root' the unit first before getting the '#' prompt?
sorry for the noob question
Click to expand...
Click to collapse
No, that's a very good question. I'm still new to this as well. The reason you can access su is because you need to install busybox. Sorry I don't have the market place link. There are plenty of posts about it around here. So you need to install busy box, run it's utility, then you will have options like su available. The shell through adb is a very stripped down unix shell. Hope that helps.
Oh, and yes. You would have to root the unit to get su permissions. If you aren't doing anything that requires elevated permissions, you can still use adb for push/pull of data.