Related
The touch 3D works great for me, BUT it removes all my other today plugins, which I most definitely need.
Is there any way to combine the touch 3D, and still having access to the std today plugins?
Amir.
I have the same question- does anyone have any answers to this ? For example , I want to have the RSS feeds in my home screen along with TFLO3D ? is it possible?
use ultimate launch to place touchflo3d on first page and the other plugins on the next page. you can size one page to fit the whole screen so that you can switch between whole pages with your thumb or with a click, like you want
greets, pucki
ps: if you prefer freeware you can use battery status, it can include today plugins as well but you have to create a personal theme on a xml-base. i made it for nike and elf, it should work on diamond also. i'm going to use batterystatus too on the diamond, but we germans has to wait until t-mobile sells the device on july 14th. if you can wait so long i will give you my theme
Can't get ultimate launch to work. When I activate the first screen, my todayscreen stays blanc.
The Ultimate launch is than removed from the todayscreen.
Can you explain what I have to do to make my own xml file fot batterystatus?
Thanx
look here http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_ext_cust_im_cs.htm
Puckmeister said:
use ultimate launch to place touchflo3d on first page and the other plugins on the next page. you can size one page to fit the whole screen so that you can switch between whole pages with your thumb or with a click, like you want
greets, pucki
ps: if you prefer freeware you can use battery status, it can include today plugins as well but you have to create a personal theme on a xml-base. i made it for nike and elf, it should work on diamond also. i'm going to use batterystatus too on the diamond, but we germans has to wait until t-mobile sells the device on july 14th. if you can wait so long i will give you my theme
Click to expand...
Click to collapse
offtopic ...
you don't have to wait if you are o2 customer
johnkorver said:
Can't get ultimate launch to work. When I activate the first screen, my todayscreen stays blanc.
The Ultimate launch is than removed from the todayscreen.
Can you explain what I have to do to make my own xml file fot batterystatus?
Thanx
Click to expand...
Click to collapse
just had the same idea, ul didn't work at all
hopefully there will be a new ul version with diamond support
tf3d is so nice, i wish i could remove the internet tab and replace it with batterystatus instead!
Guys try this program http://www.chi-tai.info/download/SecondToday.zip and do this:
Copy SecondToday.exe to your desired location, e.g. \Program Files\SecondTody\SecondToday.exe and start the application
and then just copy the program again to windows start menu, and then add it to program list in the htc touch flo. then when ever you want it just click it.
Until now this is the best way to fix it
I went to their site I didn't understand anything. What does SecondToday do? I can get something from its name, but how does it actually work?
Direct download is impossible: go here: http://www.chi-tai.info/cs_wm_tools_im_cs.htm
basically what it does is that it is a program that opens the today screen without touch flo
fataldeath44 said:
basically what it does is that it is a program that opens the today screen without touch flo
Click to expand...
Click to collapse
Thank you for making that clear. Can you return to TouchFlo afterwards?
is it possible to run this second today - thing in autostart without interfering with touch3d?sometimes it does not open when i execute it...
i need to keep an eye on my calltimes and umts-data because both is limited due my contract and the only tool that handles both is (as far as i know) battery status...correct me if i'm wrong. gprs counter is bundled with my diamond but it isn't able to count call times...
edit: just tested it and second today always gets closed (or crashes) when touchflo3d is enabled...i can add plugins to 2nd today but when i switch back to touchflo3d second today not listed in taskmanager anymore after a couple of seconds.
Hi,
did anyone find a solution to make BatteryStatus run in Background in combination with TF3D or TF2D??
I also need that app but just for the dynamically OC-Freature....
Regards
touch-it said:
Hi,
did anyone find a solution to make BatteryStatus run in Background in combination with TF3D or TF2D??
I also need that app but just for the dynamically OC-Freature....
Regards
Click to expand...
Click to collapse
I use a program called Ariel Battery and disabled the default battery icon. Put Ariel Battery in your startup folder, you can modify color schemes, it's small and even shows you the %.
amir77a said:
The touch 3D works great for me, BUT it removes all my other today plugins, which I most definitely need.
Is there any way to combine the touch 3D, and still having access to the std today plugins?
Amir.
Click to expand...
Click to collapse
You will find the answer in that thread: http://forum.xda-developers.com/showthread.php?t=401907
I've been seeing all of these roms with touchflo integrated into them but I don't want to flash my Wizard again to a different rom just for TouchFlo, seeing as I'm perfectly happy with my current ROM, basically I am just wondering where I can find the latest version of touchflo, I've searched but all of the posts I find with it are from last year.
I think this is what your looking for. Give it a try.
cabayboy831 said:
I think this is what your looking for. Give it a try.
Click to expand...
Click to collapse
What exactly does this do?
idbl_fanatic said:
What exactly does this do?
Click to expand...
Click to collapse
That's the commercial version of TouchFlo: FtouchSL. Just search this forum and it'll be one of the first results.
kareem9nba said:
That's the commercial version of TouchFlo: FtouchSL. Just search this forum and it'll be one of the first results.
Click to expand...
Click to collapse
I guess I should have asked a better question..........right now I am running SPB Mobile shell.........what would be the difference if I added this?
Thanks, this is ALL new to me
If you're using SPB Mobile Shell, there isn't much use for it. Touchflo just lets you scroll (like in File Explorer) through the items using your fingers. You can also see demos of it on Youtube if you search for it.
need help
i have downloaded the touch flo pro. the u have atatshed and insteulled it in my k-jam but i don't know how to use it
fat_halla said:
i have downloaded the touch flo pro. the u have atatshed and insteulled it in my k-jam but i don't know how to use it
Click to expand...
Click to collapse
I installed it as well, you need to go into programs, and enable it. The only thing that I noticed was that it allowed me to do as stated above, let me scroll through things, it conflicted with my SPB Mobile shell though, so I uninstalled it.
thnx
thnx for u but i have onther qus. the windos that i have flashed is the tnt 20273 with touch flo for free but i don't know how 2 configer it
fat_halla said:
thnx for u but i have onther qus. the windos that i have flashed is the tnt 20273 with touch flo for free but i don't know how 2 configer it
Click to expand...
Click to collapse
I can't see how to turn it on myself.
look at this...
itsmebryan said:
I can't see how to turn it on myself.
Click to expand...
Click to collapse
TNT 20273 doesn't have touchflo so install the file ASerg HTC scroling atached right down.
it lets you scroll with sound... then instal the cube fully works vista skin it enables the cube...
You dont need to enable it men, just in Advanced config enable sound and touch flo enable all of this options.
good luck.
the cube Fully works
sorry it is so heavy to upload so just search in forum search tool " poorlyduck vista cube" download and install it.
TF3D HD version as been ported from the blackstone to the sony X1
http://forum.xda-developers.com/showthread.php?t=442154
bc it has been sucessfully stripped and placed in cab form is there any hope for getting this running on our kaisers?
tf3d has already been ported to kaisers and other qvga devices...heres the cab silly
http://www.4shared.com/file/71379443/4e985d8e/TF3D-QVGA.html
pazookie said:
tf3d has already been ported to kaisers and other qvga devices...heres the cab silly
http://www.4shared.com/file/71379443/4e985d8e/TF3D-QVGA.html
Click to expand...
Click to collapse
lol correct me if im wrong but isnt this version not practical? ie cant turn off phone while enabled?
I will try it out ether way, but the version i listed as advantages over the version currently ported, new tables n stuff.
jug6ernaut said:
lol correct me if im wrong but isnt this version not practical? ie cant turn off phone while enabled?
I will try it out ether way, but the version i listed as advantages over the version currently ported, new tables n stuff.
Click to expand...
Click to collapse
true, the touch HD tf3d is something different than the tf3d from diamond/touch pro.
there currently working on the touch HD to port it to the Diamond/touch pro.
after that it wouldnt take to long to succesfully port this little cool app. to the kaiser and other qvga screens, just wait and see
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
All you needed to do was to reassign the Windows key back to the Start Menu after you uninstalled.
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
Not sure if you have the new HTC Class Action Drivers or not, but they are required to run the TF3D. It won't initialize without them.
splayer7 said:
Not sure if you have the new HTC Class Action Drivers or not, but they are required to run the TF3D. It won't initialize without them.
Click to expand...
Click to collapse
that and this is ment for the X1....which is a vga screen i believe
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
Reread the HTC-CA driver requirements. That Dutty rom doesn't qualify as WM6.1.
NuShrike said:
Reread the HTC-CA driver requirements. That Dutty rom doesn't qualify as WM6.1.
Click to expand...
Click to collapse
not to mention this is a VGA program...thats why i started this tread...to see if we could convert this cab for our kaisers...
Question asked and answered. Redundant thread closed.
Hey i have the ATT Tilt and i just finally updated my rom from the HTC site for the Tilt to WM 6.1. It took me awhile to switch cause i was used to and happy with what i had with the WM 6.0 and also afraid to screw up my phone. Well i finally did it and it works fine but my question is...is there away to customize the HTC Home on the today screen? When i had my phone at WM 6 i dl the HTC home plug in and HTC home customizer so i can change how the them of the HOME is and also take some buttons away like the music button that i dont use. And also with the customizer i edited so i can have my weather button work because it doesnt have my city in the list. So basically im asking can i dl the HTC customizer that i had from WM 6.0 and use it for WM 6.1 on the HTC Home that it came with? Or is there something else i need?
And i know im gonna get flack but yes i did search the forum and its hard to find exactly what im looking for since everyone has there own version of WM 6.1 and im just using the official one from the HTC site so i want to make sure that i get the right answer and doesnt screw up my phone!
Thanks in advance
lern2lvewithit said:
Hey i have the ATT Tilt and i just finally updated my rom from the HTC site for the Tilt to WM 6.1. It took me awhile to switch cause i was used to and happy with what i had with the WM 6.0 and also afraid to screw up my phone. Well i finally did it and it works fine but my question is...is there away to customize the HTC Home on the today screen? When i had my phone at WM 6 i dl the HTC home plug in and HTC home customizer so i can change how the them of the HOME is and also take some buttons away like the music button that i dont use. And also with the customizer i edited so i can have my weather button work because it doesnt have my city in the list. So basically im asking can i dl the HTC customizer that i had from WM 6.0 and use it for WM 6.1 on the HTC Home that it came with? Or is there something else i need?
And i know im gonna get flack but yes i did search the forum and its hard to find exactly what im looking for since everyone has there own version of WM 6.1 and im just using the official one from the HTC site so i want to make sure that i get the right answer and doesnt screw up my phone!
Thanks in advance
Click to expand...
Click to collapse
You need to search more, weather question I replied in another tread just the other day. Solution is to use http://www.accuweather.com whit your closest city There are alot of info on exactly how you do this somewhere already. For the HTC Home there could not be a cab more discussed I belive.. Really, search. Thats the way you learn as you will bump into alot of other question and solution on other stuff on the way. If you had google this you would have found this on first page: http://forum.xda-developers.com/showthread.php?t=319308
How about you grow a pair and try the customizer..
lol
ChumleyEX said:
How about you grow a pair and try the customizer..
lol
Click to expand...
Click to collapse
Just in case you only grow 1/2 a pair, yes it will work on 6.1.
http://www.4shared.com/file/83436834/68fe2225/HHCv10Final.html
denco7 said:
Just in case you only grow 1/2 a pair, yes it will work on 6.1.
http://www.4shared.com/file/83436834/68fe2225/HHCv10Final.html
Click to expand...
Click to collapse
Denco if far too nice, he should be a mod.
ChumleyEX said:
Denco if far too nice, he should be a mod.
Click to expand...
Click to collapse
I agree, at least he could have removed http://www. so the OP actually had todo something himself lol.
Thanks everyone for your help even though you guys didnt want to!
i here alot of people talking about the hero android for the htc fuze but i cant find it. i was wondering if anyone can get the software for me not the theme please
Gaza-god said:
i here alot of people talking about the hero android for the htc fuze but i cant find it. i was wondering if anyone can get the software for me not the theme please
Click to expand...
Click to collapse
http://www.connect-utb.com/
For all your booting android needs, it's a pretty nice setup but I wouldn't count on it for everyday use because a few things don't work yet...
Thats the different between the RAPH, RAPH100, RAPH800, and RAPH & DIAM? I have ATT FUZE, not sure which category that falls under...
lilbluemirage said:
Thats the different between the RAPH, RAPH100, RAPH800, and RAPH & DIAM? I have ATT FUZE, not sure which category that falls under...
Click to expand...
Click to collapse
I have the AT&T Fuze and I use the one in the RAPH100 category; I believe the RAPH800 is the CDMA version of the Raphael. Regarding the other categories, 'RAPH and DIAM' appears to be an outdated version (v1265 as opposed to RAPH100's v1714) and the 'RAPH' category also appears to be an outdated version (dated 2009-02-19 as opposed to RAPH100's 2009-06-21).
I honestly don't understand why the website decided to categorize the port versions in such a confusing manner.
this doesnt appear to be the hero android.. or am I just downloading the wrong thing here? I followed all the logical links and went to Raph100 and downloaded the file. Looks more like the basic android though NOT the hero Sense OS
Also... are you sure that we are suposed to use Raph100? NOTHING seems to work with the download provided.. I cant make a call no wifi, no GPS, no.. anything. In the previous version I used I was at least able to make a call.... that was like 7 months ago though
Just create an account and follow the instructions
http://community.pointui.com/topic/suiteto-come-pointsense-suite
I've tried it but couldn't get it to properly work but others have, but maybe i'm just slow
Sparkz914 said:
Just create an account and follow the instructions
http://community.pointui.com/topic/suiteto-come-pointsense-suite
I've tried it but couldn't get it to properly work but others have, but maybe i'm just slow
Click to expand...
Click to collapse
Install PointUI. Any version will do but try the latest free version.
Install PointSenseSuite.cab
Enable the UI from Settings -> Today
Select the recently installed theme under Menu -> Customization
Install the PointSense.HomeScreen.cab.
Disable and re-enable the plugin, from Settings -> Today...
marios96 said:
Install PointUI. Any version will do but try the latest free version.
Install PointSenseSuite.cab
Enable the UI from Settings -> Today
Select the recently installed theme under Menu -> Customization
Install the PointSense.HomeScreen.cab.
Disable and re-enable the plugin, from Settings -> Today...
Click to expand...
Click to collapse
And this is where the smart people come in to play to help us yayyyy
ok ... im a little confused .....
I have a rapheal - with NRG Rom using tf3d2. I have purchased SPB MS3, so i tend to not use TF3D anymore.
Ive had a go at Andriod (the connect-utb one) just to have a nosey - obviously it doesnt play nicely yet
This PointUI sense .... is it an overlay of WM6.5 (like TF3D) or is it a bootable OS (like Android) ?
I think my main question is .... is it the Hero OS ? or is it just a WM theme made to look like the hero OS ?
sorry if really noob question ....
PointUI is just a today plug in really.... Much like the old HTC Home or TF3D is.
But what is weird is that people make their phone look like an HTC Hero with what I posted but I have no idea how they do it
Realized I have to install a bunch of things to make it look like the Hero
the third thing you are sposed to install i cant find anywhere even on the main thread for it
Wait until tommorow, for the new release of PointSense UI.
First, install Home 2 here
Then, install Point Sense UI by following the instruction on the site.
Copied right from the site. (Make sure you have Point UI Home 2 installed first)
Install:
- Only for Point UI 2.1.0.6c or higher
- Recommend to install in clean Point UI (You must run Point UI first, accept Terms and activate before install the suite)
- Backup your Home2\Common folder to get back default home screen
- Exit Home 2
- Download cab and install (it may take a long time, because of there're many files to extract)
- Enable Home 2 again
- Select PointSense Theme (for correct color), and add the PointSenseScreen Applets.
lbhocky19 said:
the third thing you are sposed to install i cant find anywhere even on the main thread for it
Click to expand...
Click to collapse
one of the files is a zip that has the files needed in it
this subject was open for android, why are you guys talking about pointui? waste of data on xda...
Hmmmm.....I'm running RAPH100 on Touch Pro and it loads but refuses to accept my PIN. Can anyone help me?!
detelazurno said:
Hmmmm.....I'm running RAPH100 on Touch Pro and it loads but refuses to accept my PIN. Can anyone help me?!
Click to expand...
Click to collapse
Disabling PIN promt in winmobile help's me.
i always get stuck at the keyboard its to small lol