Database Develop

[UPDATE] AMAZING All-In-ONE CAB FOR 6.5!!!!

FROM http://forum.xda-developers.com/showthread.php?t=503635
----------------------------------------------------------------
Ok Kaisers! Here again the M2D ALL-IN-ONE CAB UPDATED!...properly fixed and with new features
But before u install remember:
0. MUST HAVE A 6.5 ROM!!!! (it works with some 6.1..but people complain)
1. BACKUP!
2. INSTALL WITH SD CARD!
3. INSTALL WITH USB CABLE CONNECTED SO THAT DOESNT GO SLEEP MODE
4. BETTER TO INSTALL OVER A FRESH INSTALL
http://rapidshare.com/files/234860254/M2D_ALLINONE.CAB
or
http://depositfiles.com/files/eeztj55tl
MORE INFO ABOUT THIS CAB:
http://forum.xda-developers.com/showthread.php?t=503635

40M !? Seriously!? Are they all this large?
I was curious about M2D etc but I often find cabs install much larger than the cab itself, I can't imagine how much ram this could possibly take up.

I cant get it to work tried a few times and each time makes the phone unbootable (hangs after the t mobile animation and before the windows mobile boot screen shows)
Any ideas? I've followed the instructions and just makes it unbootable

evilkern said:
I cant get it to work tried a few times and each time makes the phone unbootable (hangs after the t mobile animation and before the windows mobile boot screen shows)
Any ideas? I've followed the instructions and just makes it unbootable
Click to expand...
Click to collapse
Well just tried to get it work and have the same issue. It boots to the second splash screen and that is it. Somebody shall check that cab firs.

evilkern said:
I cant get it to work tried a few times and each time makes the phone unbootable (hangs after the t mobile animation and before the windows mobile boot screen shows)
Any ideas? I've followed the instructions and just makes it unbootable
Click to expand...
Click to collapse
Hmmm...did u follow the info? Need to install with SD inside. What rom u have for me to test?

zmesler said:
Well just tried to get it work and have the same issue. It boots to the second splash screen and that is it. Somebody shall check that cab firs.
Click to expand...
Click to collapse
Hmmm...what rom? U can check with CabWiz....is nothing more than a compilation. Of course it should be a 6.5 rom...

Ok so thats the bit i have missed. I tried to run that on 6.1. My bad Had to flash again. But that is cool cos I found something called SPB Mobile Shell 3.0 and I tell you that rocks.

I've tried to install the CAB on my Kaiser and it was working during the short time I tried. Nice looking! However I have decided to uninstall it to save memory (30MB+). After I tried to remove it from Remove Program option, it seemed to have stalled as I waited for more than 20min+ and it's still trying to uninstall. At the end I had to do a soft reset and then I performed a hard rest immediately afterwards, and later only to realize that my SD card has been wiped clean. Has anyone else noticed this problem?

ryusaeba said:
I've tried to install the CAB on my Kaiser and it was working during the short time I tried. Nice looking! However I have decided to uninstall it to save memory (30MB+). After I tried to remove it from Remove Program option, it seemed to have stalled as I waited for more than 20min+ and it's still trying to uninstall. At the end I had to do a soft reset and then I performed a hard rest immediately afterwards, and later only to realize that my SD card has been wiped clean. Has anyone else noticed this problem?
Click to expand...
Click to collapse
Take a look @ other thread linked @ top

evilkern said:
I cant get it to work tried a few times and each time makes the phone unbootable (hangs after the t mobile animation and before the windows mobile boot screen shows)
Any ideas? I've followed the instructions and just makes it unbootable
Click to expand...
Click to collapse
I get the same problem. I am running HyperDragon's 6.5
I thought maybe it was because I didn't install it after a fresh rom install but that was not the case as I reflashed hyperdragons 6.5 rom and installed this cab and still it hangs up.

So which roms do actually work with that patch?

Can you provide me with the .tsk theme file because mine is not applied properly even after installing your cab file. Also if you can provide the Volume control cab that will be great
Edit/Delete Message

well .. i tried this one and i had the same problem too.
i tried to make my own .cab file, it works fine.
so i want to share it.
just tell me if it worked fine with u.
thnx
download link
http://rapidshare.com/files/255820851/SoLoM_M2D.cab

Anyway to slim M2D down in size? It's a nice GUI, but damn it eats memory.

is there any way to install Microsoft NET CF 3.5 on touch pro?

I have tried many methods posted on this website, i am currently using a romeos rom 6.1 1.971.....it is getting very frustrating now, all i am trying to use this program for is Gremote......any suggestions would be greatly appreciated and i tried to install Microsoft NET CF 3.5 on touch pro it tells me i need more storage space and a support number 3....ANYONE PLEASE HELP MEE
I have renamed mscoree.dll to various things including mscoree.backup.dll and mscoree.dll.txt same issues, still cannot install this program, is there way around it so i can still install and work the gremote?

I've had this problem with romeos also and i searched through whole xda and i found this:
1. You should shut down manila.
2. Then soft reset.
3. Uninstall your old net. 3.5 if possible (program/remove under system settings)
4. Start a regeditor and delete in the registry this map: HKLM/Software/microsoft/.NETCompactFramework
5. Soft reset again and try installing net 3.5 again.
If it doesn't work repeat al this again and sometimes you have to try installing it twice times, and soft reset some more again and then remove again the registry stuff. and try install it again and again. It worked with me.
Hope it helps

sorry im a newbei i dont know how to shut down manila, how would i be able to do that, and where can i find a regeditor...thanks alot

Hey i got it!!!!!!!!!!!! THANKS A BUNCH

well i got it to install that was about it i couldnt really function it or where to fin dit on my touch pro, i then installed g remote that wouldnt work ...oh well i give up spent way too much time on this peice of s*&*^

I installed the .net on my touch pro and the only way you can tell if it is installed is if you go to start-settings-system-remove programs. There is a list of everything you have installed. From there you should be able to run programs that need the compact framework in order to work.

beejive starting -> netcfv35.messages.de.wm.cab

hey guys.
when i try to start the pre installed beejive with my raphael with win mobile 6.5 (EnergyROM 3.0 'Phoenix' (21812)) there is some wired message telling me to download the "netcfv35.messages.de.wm.cab" to get the full error. i have done this. still same ****. havent found anything on inet/xda developers. tried SEVARAL roms/win mobile versions. still no solution. i am wondering if i am the only one.....?!
what i am wondering about is: why does this app tell me to download the DE version(is the code for deutschland - germany). well i am german. but how does the raphael know? i havent installed a german tool. nothing!
maybe some solutions or suggestions!
ty in advance

I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821

have the same error with win mobile 6.1.
also it is pre installed on a 6.5 rom. why should the chef do this if it would not work?!
i tried the same patch few days ago. didnt worked for me. how have you done it?
beejive was pre installed. than i installed the 1. LennySh_SQLCEMobile_3.0.CAB after this the 2. BeeJive_Fix.CAB
still same error..

I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.

ocblazer949 said:
I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821
Click to expand...
Click to collapse
worked like a charm

adoute said:
I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.
Click to expand...
Click to collapse
I have just installed the latest version of windows 6.5 energy rom and can no longer get pockettwit to work get the NETCFv35.Messages.EN.wm.cab error. Installed the cab but still dont get the complete error msg. So is the problem because the rom has .NET 3.7 cooked and not .NET3.5? If so is the solution the same as you have above? and if so where i do i find .NET 3.5 an SQLServer...
and install them?
Love the new energy ROM so much quicker etc - though does eat the power

These are the cabs I used to install .NET 3.5 and SQLCE on the 2009/6/13 Energy ROM (standard). I simply installed .NET, then SQLCE, then soft reset. BeeJive (and TrackMe) worked fine after the soft reset. I did not do anything else - both the cabs installed fine.
The forum won't let me attach the .NET cab... The filename is "NETCFv35.wm.armv4i.cab". I'm sure that I found it somewhere here at XDA, so it shouldn't be too hard to find.

nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..

zotero said:
nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..
Click to expand...
Click to collapse
Strange. It has worked for me 3 times in the last 10 days (trying various software, not liking it, hard reset).
The only thing I can think of is that my sashimi autoconfig installs the SQLCE cab. After sashimi has finished, and I've done some manual tweaking, I soft reset, install .NET 3.5 & SQLCE, soft reset, then everything just works. It is possible that there is a soft reset between .NET and SQLCE - I'm not entirely sure, but its worth a try.
Thanks for linking the .NET cab. For what it's worth, the version I install is 2.58 MB (2,707,308 bytes). Is it possible that yours is different?
I hope you find a way to get it working.

this file got exactly 2,707,308 bytes, too.
well. now i am going to deinstall beejive SQLC an .NET. then install SQLC (softreset) .NET (softreset) beejive (softreset).......nope. still not working. damn it.
just realized that msn is working. maybe my icq contact list is too big? going to try an other account..
edit
icq with 5 contacts working fine. WTF!?

this post is really old. but now i found out whats the problem:
after A LOT of research i GUESSED that a problem might be some strange user names in my contact list. i am talking about characters like this ****: ÐØΓťšĹĦĨ (just examples..)
i changed their 1337 h4xx0r!!1111oneone names into something normal...
now its working
maybe this is going to help somebody.

Minature BeeJive
Is anybody elses BeeJive realllllly small when you enter the chat feature like so minature you can barely see the avatar or is it just mines? Thats the only thing i HATE about the Fuze does anybody have a fix or a tweak thanks

after installing google traslator i get massge i have to install first NETCFv35.win.armv4i.cab
yet wile installing the NETCFv35 i get error i need first to start google this is catch22 !!!
any help ????/
thanks
baki69

NETCFv35.Messages.EN.wm.cab
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.

NETCFv35.wm.armv4i.cab and others...
im doing a forum search to try to find out what these netCFv..etc files are for but havent really figured it out. there are a few different ones out there, dont even know which I would need.
Ive also had programs tell me to install these net files before, but Im hesitant to start searching out and installing things I dont understand.
Im using stock rom (havent updated yet) for T Mobile USA HD2, with Cookies installed.
Any love for a noob?

zarp said:
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.
Click to expand...
Click to collapse
i have the messages cab installed, well it tells me it is anyway
i get that same error BUT i can't locate the file you mention, where should it be ?

Xperia Restarting problem with Custom Roms

So i have been using Custom ROMs for about a year now with no problems. However, recently i flash to the Valkyrie Firestorm 4.4 (i think) leo and when i attempted to restart my fone it would either hang on the sony erricson logo or it would boot up like it does after a flash. As in it would run the customisation and wipe all my contacts and other information, but strangely enough the clock would remain on the correct time.
This has happened with every firestorm i have tried, which are: 4.4 leo, 4.4 manila and the 4.5 leo. I am going to try a different ROM to see if i still get the problem. has anyone had this problem?
I've re-flashed my hard-spl multiple times to no avail.

Yup I've had the same problem with itje's touch it 14 rom. I have no idea why this is happening, it already occured twice with me.

I had the same problem with the valkyrie 4.4 rom, Itje's Toucht-it Leo v10 and Toucht-It Xperience v2, UnOff 6.5. And also with other versions of itje's Touch-it because i remember seeing the HTCpedia.com customization screen a lot
Every time my phone hung and then when i push the reset button it take's a long time and then it is back to first run. or it does nothing and stays at the touch-it start-up screen.
Could it be a hardware failure like something with the backup batery in the phone? when power goes off it doesn't save data and then when you turn it on it thinks it is first run?

I can always tell when it is going to happen if the favourite programs on the programs tab dont work anymore. When I want to start a program from the tab it says "location not found" or something. After that I will likely have a system freeze and after that I have a hard reset, same sympoms as Aerox912.
So maybe it has something to do with the programs tab?

I am having the same issue with Christians 3.201 build.
Also during the installation it will often hang on the install of Opera or Opera Beta.
But I tried re-downloading and reflashing 6 times before I gave up and went back to an older ROM.
Looking forward to the next version so I can try again. I really like the Firestorm but I also really like the Panels.
Now I just need to find out how to install the SPB Mobile Shell 3 as a panel like on Christians and I would probably stay with my SEX1 build.

Using itje's touch it 15 RC2 and it sometimes, for no reason, phone just reboots. It used to happen with version 14 as well. Never used to have that problem before then.

I tried with rotastrains Blaze rom. the latest edition and i am still getting the same issues. I too, can tell when it is going to happen. When the programs can't be run anymore or if the phone freezes and then i need to turn it off, i can almost guarantee that will happen.
Im glad to see im not the only one with the problem, but isn't there anyone with a solution? I've tried everything and i really cant put up with having to wait 15 minutes until my phone is usable everytime it restarts.

Guys, i had this problem with my Diamond recently & i can say that it's more than frustrating.
try this option, I'm not sure if this is the EXACT same process for the Xperia but it did solve my issues. Perhaps scheduling a daily backup of PPCPIMBackup will help keep info up 2 date when the dreaded lockup happens?
hope this helps

flash a stockrom and then the custom rom and the problem should be gone

Why would that help?
I now tried cristians rom, and had the same problem again within one day. I'm now gonna try the MTTY (format) option, see if that helps...

mobilkungen78 said:
flash a stockrom and then the custom rom and the problem should be gone
Click to expand...
Click to collapse
This simple solution seems to work fine for me. Thanks man!

The MTTY solution for formatting the phones ROM area worked just fine for me

Can you point me the mtty formatting method? Please.

I also had this problem once at my x1 and once at my girlfriends diamond. Seems a reflash with a stockrom and after that flash the custom rom again solves this problem.
Atleast it worked for me.

I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.

Drokare said:
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe it isn't a software problem but a hardware problem. Incase no rom fix it.

toontoonizer said:
The MTTY solution for formatting the phones ROM area worked just fine for me
Click to expand...
Click to collapse
Could you please describe the process.
I tried the The DEFINITIVE MTTY Thread but the task 29 command did nothing... Though i'm not sure what should happen.

For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process

someguyyy said:
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
Click to expand...
Click to collapse
Hm... i tried that but that did nothing.

happened to me many times..most frequent is my X1 will restart itself every half an hr...very frustrating
SOLUTION:
Format Your SD card (don't be lazy and just delete the old stuff and put new rom file in there).....put a fresh copy of the .nbh file in root.
Hard reset after flash.
Problem should be gone

Questions about changing ROM

The first time is always the hardest.
Recently I've been playing with the registry to try and lower the 'lowest volume' setting for my headset with no success. Apparently I need to change the audiopara file. I'm thinking that changing the ROM may help. So here's a few questions:
1 - If I decide to go back I can download my original ROM from here (Generic Australia R3AA013 Software Update)?
2 - Do you reckon Christians 6.5 ROM is pretty good? Do you recommend changing ROM?
3 - Does each ROM come with it's own registry etc or do they rely on stuff on the phone (does flashing the ROM remove everything?).
Thanks!
.... sorry can't post links. Feel free to recommend a good 6.5 ROM.

'Tron said:
The first time is always the hardest.
Recently I've been playing with the registry to try and lower the 'lowest volume' setting for my headset with no success. Apparently I need to change the audiopara file. I'm thinking that changing the ROM may help. So here's a few questions:
1 - If I decide to go back I can download my original ROM from here (Generic Australia R3AA013 Software Update)?
2 - Do you reckon Christians 6.5 ROM is pretty good? Do you recommend changing ROM?
3 - Does each ROM come with it's own registry etc or do they rely on stuff on the phone (does flashing the ROM remove everything?).
Thanks!
.... sorry can't post links. Feel free to recommend a good 6.5 ROM.
Click to expand...
Click to collapse
1 yes
2 best find out for yourself; the earlier the better
3 yes and no; no, the rom is replaced and most probably rilphone.dll, but radio and spl are normally untouched
cheers

Hey guys. I just got my x1 back from repairs (they fixed the nasty crack for free XD) and wanted to know if I can Hardspl again. When I put the stockspl, the page said that dont bother using this if you are gonna put hardspl back. But I had to for warranty reasons.
Anyway...can i just flash hardspl again?
Thanks in advance
T

redlite said:
Anyway...can i just flash hardspl again?
Thanks in advance
T
Click to expand...
Click to collapse
I did that 2/3 time without problem.

DrakenKorin said:
1 yes
2 best find out for yourself; the earlier the better
3 yes and no; no, the rom is replaced and most probably rilphone.dll, but radio and spl are normally untouched
cheers
Click to expand...
Click to collapse
1 - Sweet.
2 - Changing the ROM takes a bit of effort just wanna be sure it's a good move.
3 - Okay - what is the radio and spl?
Cheers.

That Energy ROM looks pretty sweet. May go for that one.

Another Question;
The 'NEW ORIGINAL X1 and X2 ROMS update 3.2.2010' thread lists all the original ROMS (in my case Generic Australia R3AA013 Software Update).
forum.xda-developers.com/showthread.php?t=475482
So could I restore my X1 to it's original ROM by downloading from the Link above?
Why would you choose to take the time to back-up your ROM if you can just download the original?

'Tron said:
The 'NEW ORIGINAL X1 and X2 ROMS update 3.2.2010' thread lists all the original ROMS (in my case Generic Australia R3AA013 Software Update).
forum.xda-developers.com/showthread.php?t=475482
So could I restore my X1 to it's original ROM by downloading from the Link above?
Why would you choose to take the time to back-up your ROM if you can just download the original?
Click to expand...
Click to collapse
1. Yes.
2. Some people flash their phones 2-3 times a day, so it's good to have something to fall back onto where everything is setup the way you want to. That being said, I don't back up my ROM, I just do a clean install every time I reflash.

harveydent said:
1. Yes.
2. Some people flash their phones 2-3 times a day, so it's good to have something to fall back onto where everything is setup the way you want to. That being said, I don't back up my ROM, I just do a clean install every time I reflash.
Click to expand...
Click to collapse
Cool, thx.
When you do a hard-reset, which I've done recently, that take your phone back to square one. So I guess what I'm trying to work out is if it's necessary to back-up the ROM. Basically I'm being lazy.
I've downloaded two ROMs to try - Christian's ROM and Firestone V6.1.

HELP:!!! my x1i phone not running
lastly , i 've installed a language supporting program , then i restart the x1i but it did not boot again , it just reach to sonyericsson logo and still there .... i've tried hard_spl and all of these stuffs one by one. but when it connect to the device -as i remember the third step- it shows the the current verion: -it does not show any thing here- and the next version , 1.00.x or something like this.
when i clicked the next button i show the progress bar on each of tow (pc and x1i) and then stay on 0% for about 3 min then it show the recovery wizard , some time it said that "lost connection" others nothing but recovery... x1i here still showing the progress bar as 0% , so i remove the battery or soft reset to go into the recovery wizard , then i shows successfull recovery ... but i don't see any respond on the x1i , it's the same status , no boot no ability to update or or ...
when i connect the x1 and go to boot loader(manually known buttons) the Win XP (mine on pc SP2) show new device and good install driver and successfull driver installion on the first time and then just shows the sound of plug in the device or plug out...;
sorry if i said too much here . just i want to make it shown to all.
thanks for all who will mention even "i 'll try to ask for you"
good to be here

'Tron said:
Cool, thx.
When you do a hard-reset, which I've done recently, that take your phone back to square one. So I guess what I'm trying to work out is if it's necessary to back-up the ROM. Basically I'm being lazy.
I've downloaded two ROMs to try - Christian's ROM and Firestone V6.1.
Click to expand...
Click to collapse
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?

DrakenKorin said:
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?
Click to expand...
Click to collapse
I've my person data sorted. All my contacts are stored in Windows Live - so all I need is the Windows Live app to retrieve my contacts.
I use online sync for my calendars - so no problem there. Don't care if I lose my SMS messages.
I've copied across any pictures.
I store all the .cabs for my favourite apps on my SD card.
I made some changes to the registry to try and adjust the headset volume but to no success.
So probably don't need to pack up my Rom.
I like the look of Spike's X1.5 ROM.

'Tron said:
I've my person data sorted. All my contacts are stored in Windows Live - so all I need is the Windows Live app to retrieve my contacts.
I use online sync for my calendars - so no problem there. Don't care if I lose my SMS messages.
I've copied across any pictures.
I store all the .cabs for my favourite apps on my SD card.
I made some changes to the registry to try and adjust the headset volume but to no success.
So probably don't need to pack up my Rom.
I like the look of Spike's X1.5 ROM.
Click to expand...
Click to collapse
sounds reasonable so far
you can use apps to automatize (to a degree) the restoring of personal settings/apps/progs/data/...
e.g. with user customization (UC) or sashimi
that's especially useful when often flashing an update of the already installed rom, as menu structure and general reg layout is similar (expect for certain update)
that way you can easily get most of your customization done without major effort (except of course for the one time you need to config your uc tool), right after flashing, some roms even check for uc configuration during rom customization process
about the reg edit: did the adjustment not work or the export of the changed setting?

yes i did it
DrakenKorin said:
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?
Click to expand...
Click to collapse
many thanks for you DarkenKorin...
when i use the micro sd way it stays on "loading ... " and don't gives any thing else...this thing with many roms and many pcs-but on xp- .
yesterday i got window7 and tried to connect my x1 , and the same thing become... but my pc was with no mtty ... and the microsoft active sync was not able to install on Seven...
so today i've got the mtty and i'll try after install it.
if it worked i will notify you surly.
thanks again...
and if anyone knows how to solve i thank him.

DrakenKorin said:
about the reg edit: did the adjustment not work or the export of the changed setting?
Click to expand...
Click to collapse
^ I edited the registry in an attempt to decrease the headset minimum volume (I found the minimum volume too loud for in call & listening to the radio).
I have since learnt that I need to change the audiopara file. But I don't have the expertise. So I'm hoping my new 6.5 ROM's headset volume is a little quieter .