Haha, i found the solution.
Thanks!
Try activisync metod with notebook!
Will do in a sec.
When i have placed it onto MicroSD card it changes name to only Kovsimg, shall i rename it .nbh again?
Hi!
Have you done the Hard Spl first before you can use these Custom Roms?? Read the sticki threads about how it´s done.
I don´t know if this is the problem but you said that you have a orginal danish 6.1 Rom. So just try it out and read the stickies first and then put it on the mem card and with the name kovsimg.nbh.
Good Luck from a swede!
Br!
Giganten79
I've used serveral other cooked roms.
But shall i rename it againt to .nbh?
Hi again!
niclas1805 said:
I've used serveral other cooked roms.
But shall i rename it againt to .nbh?
Click to expand...
Click to collapse
Just try to format the mem card again and then copy over the file kovsimg.nbh to the mem card again. Try this first, if i does´nt work try to update with Custom RUU instead. You know how to do it?
//Giganten79
I don't know how to update with custom RUU?
I have just tried on an XP notebook with acticesync. Same problem.
niclas1805 said:
I've used serveral other cooked roms.
But shall i rename it againt to .nbh?
Click to expand...
Click to collapse
file must be named kovsimg.nbh so Yes you need to keep the extension.
you probably should set up your folders configuration to show file extensions!
Maybe a stupid question, but how do i do that?
Now i have tried all sorts of things like formatting the mem card, and changing the name of the file to .nbh.
But it still looks like the picture...
What i do?
buddy i think that its ur mmc.
it happened to me too it said "no img file found" when i used my 1 GB micro SD card, but worked fine with my 8GB.
I think it was due to my 8GB being Micro SD HC.
Its just a guess this difference did have an effect on my HTC Universal back a year.
Is this the first time ur updating ur rom?
I suggest u get another micro SD HC card, perhaps borrow from ur friend first to see if this really is the issue.
and another thing;
just changing the name of the file doesn't change it into a .nbh file.
if you are using windows, go to the folder >Tools (on top bar)> Folder Options> General Tab> And UNCHECK the box which says "hide extensions of known file types".
Then you rename the file to KOVSIMG.nbh
If you are using VISTA, you would have to go into folder options from the control panel.
And then try again, and lets see if it works.
as said in other place
extract the 7z file
dont rename it..
u can rename the ruu.signed.nbh after extracting it
in windows, look somewhere in control panel, folder options, something like 'hide file extensions of known file types' and uncheck. because, i assume your konvskyimg.nbh file didn't show it's extension ...
Related
Hey I am new, and I am wondering how do you install cab files? I downloaded the midlet manager and i extracted it on my pc, and i see a bunch of files but none of them are cab files,they are all unidentified,can some one help me please? much appreciated
thanks in advanced
Just copy and paste the zipped cabfile in your phone anywhere through Activesync,preferably 'My documents' folder and execute it there in the phone,it'll run and install all by itself.
Cheers!
when I extract the file,I dont see any cab files, So i just put the whole folder in my phone,I try clicking on the files and they wont open,I just get a message sayin
"There is no application associated with "00CAB10A",run application first then open this file from within the application
ok, for 'Midlet' here's how you do it as per the post in Midlet Manager by risidoro:-
------- HOW TO INSTALL ------------
- Download Risidoro's Intent MIDlet Manager version 11.1.7.1023
- extract the cab (inside the archive) somewhere in your PC (e.g. Desktop)
- copy to somewhere in your PocketPC (e.g. \storage card)
- in your PocketPC, navigate with File Manager to the cab and tap on it to install
- when asked, choose to install in the Device (and NOT in Storage Card!)
- reboot when asked
or read the thread :-
http://forum.xda-developers.com/showthread.php?t=286604
Cheers!
I just said when I extract the folder I dont see any cab files, are files are unidentifed,do you understand what am saying,I see a bunch of files but none of them have cab extensions i see
setup
and other files buh none of them have cab file extension,
can you please just send me the cab file because I cant seem to extract it or get it, maybe my pc doesnt have some kind of plug in? i dont know
snaxxx said:
I just said when I extract the folder I dont see any cab files, are files are unidentifed,do you understand what am saying,I see a bunch of files but none of them have cab extensions i see
setup
and other files buh none of them have cab file extension,
can you please just send me the cab file because I cant seem to extract it or get it, maybe my pc doesnt have some kind of plug in? i dont know
Click to expand...
Click to collapse
You are NOT supposed to unpack the CAB!!!
You must copy the cab (Risidoro_Intent_MIDlet_Manager_11.1.7.1023.cab) found inside the zip file from the thread that zabardast linked to your device and simple run it (one click via File Explorer or double-click with Total Commander)
as simple as that...
thank you so much
I got it installed
ok I have a htc droid eris and I can't find the file manager on my phone to get to the files on the sdcard. so I downloaded a file manager app and when I click on the .cab file it does not just install it asks what I want to do open with kind of thing. like browser and a bunch more things I have tried most of them and nothing is working. Is there something else I need to install a .cab file with this phone or wtf is my dumb butt doing wrong to not be able to install it.
Install .cab files to unlock sd card.
Hi, think ive messed up here... can someone help or confirm my balls up!
Ive been following this tutorial to flash my hd2 with an updatable Win.7 rom;
http://forum.xda-developers.com/showthread.php?t=1236027
Charging ahead, installed, had a few probs along the way but worked through them... got it installed and working!
Then, moving onto step two of my plan, a dual boot of Android from sd card... :S Do you know whats coming? After re-reading the install instructions I noticed the 'Unlock SDCard' a few steps before installing the rom. :S I have now learnt that Windows mobile 7 locks the sd card to the device and is un-usable in anything else, having already messed up an 8gb and a 16gb...!
Could anyone please tell me if it is possible to 'somehow' install the .cab files to unlock the sd card...? or anyone know of a way to decrypt the sd card?
"THE SD CARD IS UN-READABLE IN MY PC AND PHONE WITH WM6.5 STOCK ROM"
If I re-install the rom from the 'back to the future' tutorial (link above), the storage is available for use on the hd2, but still cannot be seen by my PC... making it hard to install .cab file or anything else!
Both my sd cards have effectivly been high-jacked by microsoft...!
Please help me liberate my GB's...!
I've searched and I've asked and no one wants to help...Could someone please point me in the direction that I need to be in
Purpose
Sliding sounds
Games
and other applications..
Thanks
A CAB installation is just like a Desktop installation but on your phone... Transfer the CAB to you phone (I put all mine on the memory card), click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card.
mchapman007 said:
A CAB installation is just like a Desktop installation but on your phone... Transfer the CAB to you phone (I put all mine on the memory card), click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card.
Click to expand...
Click to collapse
So I copy the folder to the card..Then I click the cab from the desktop or using the phone???
*tries it out now*
Thanks man for you input
On your storage card create a folder called "cabs". Then put the cabs you want to install on your phone in this folder. Then open up file explorer (on your phone) and go to the cabs folder. Then select the cab you want to install by pressing it on screen or with the hard down key. Your phone will start to install the cab and it will ask you where you want to install (either phone memory or your memory card), choose which one you want. Note that some programs work better when installed to the phone (read and you'll find out suggestions). After the installation is complete your phone will tell you that it was successful.
Ron
I don't know
"click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card."
Do I unzip with the phone or the desktop???? I copied the folders to the card...after that I'm lost...How do I run the application???
smoka said:
I don't know
"click on the CAB, then install app. Generally if you have a memory card, the CAB installation will give you the choice to install to the phone or card."
Do I unzip with the phone or the desktop???? I copied the folders to the card...after that I'm lost...How do I run the application???
Click to expand...
Click to collapse
Unzip the folder on your computer and transfer the cab over into the "cab folder" on your memory card. Open file explorer on your phone, navigate to the "cab folder" on your memory card, select the cab to install and your done. No need to copy the whole folder to your phone, just the cab.
Ron
mark43 said:
On your storage card create a folder called "cabs". Then put the cabs you want to install on your phone in this folder. Then open up file explorer (on your phone) and go to the cabs folder. Then select the cab you want to install by pressing it on screen or with the hard down key. Your phone will start to install the cab and it will ask you where you want to install (either phone memory or your memory card), choose which one you want. Note that some programs work better when installed to the phone (read and you'll find out suggestions). After the installation is complete your phone will tell you that it was successful.
Ron
Click to expand...
Click to collapse
Thanks for your input...I tried that and it gives me
"There is no application associated with"00CABE91".Run the application first,then open the file within the application"
What am I doing wrong????
smoka said:
Thanks for your input...I tried that and it gives me
"There is no application associated with"00CABE91".Run the application first,then open the file within the application"
What am I doing wrong????
Click to expand...
Click to collapse
That is not a .cab I will attach a cab for you to try. I it is the transformers sliding cab. No need to unzip. Just download it to your computer and transfer it to your phone with either activesync or take out your memory card, stick it into your computer and put it in the folder you want. Let me know if it works.
Ron
thats the one I'm trying to use...So I need to pull the memory card out and active sync it... So how do I add those to the active sync task????
Thanks for your patience
smoka said:
thats the one I'm trying to use...So I need to pull the memory card out and active sync it... So how do I add those to the active sync task????
Thanks for your patience
Click to expand...
Click to collapse
Open activesync and conect your device. Make sure you have a green symbol and click explore which is to the right of schedule. It opens your device and navigate to your memory card and cab folder if you have one. Then on your computer right click on the cab you downloaded and select copy. Now go to the window you brought up when you hit explore and right click in the destination and select paste. Now you have the cab on your phone. Next, on your phone open file explorer and navigate to the folder where you just pasted the cab and select it.
Ron
Come ON!!!!!
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.
mchapman007 said:
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.
Click to expand...
Click to collapse
no offense
mchapman007 said:
Please don't take offense. But, if you need this much help to install a CAB, you better spend a whole lot more time reading this forum before you touch you phone and really mess it up.
Click to expand...
Click to collapse
+1!!!!!!!!
Do not uncompress (unzip or rar) cab file.
He is uncompressing the cab into a folder and transfering it. His compression software shows the cab as compressed.
Just transfer the cab uncompressed and click on it and it will install. I bet that does the trick.
Also, if you want you can change it so that your compression software doesn't see CABs. I use WinRAR and you can just uncheck it under options>settings>integration and just uncheck CAB.
... LOL?...
a .cab is the "installer file" in windows mobile.
Steps:
1. Copy the .cab file into your phone
2. Open the File explorer in your phone and look for the .cab File
3. Click on it
4. Choose the place where you want to install it
5. Enjoy your new program(or sliding sound or anything)
Batchell said:
Do not uncompress (unzip or rar) cab file.
He is uncompressing the cab into a folder and transfering it. His compression software shows the cab as compressed.
Just transfer the cab uncompressed and click on it and it will install. I bet that does the trick.
Click to expand...
Click to collapse
Thanks Batchell..However I was able to get my question answered by ANOTHER HELPFUL FORUM!!!!! I've only had my phone for 2 months and I DIDN'T know that you didn't have to unzip the files...I didn't have to worry about that stuff with a TREO... So to all that was helpful I really appreciate it..and the others with all of the slick jokes are bunch of assholes...yep I said it..Thats why I asked for a tutorial for cab installation smartass!!!!!!
This is a developer forum. If you ask a question here, it is assumed that you have a moderate level of computer literacy. This includes being able to unzip files.
Next time, please state you know NOTHING and people will give you the appropriate level of help.
Before others flame you even more for your last comment, I'm closing this thread for being inflammatory.
http://forum.xda-developers.com/showthread.php?t=446070
Per the above thread, here is where I am:
Step 1 (preparations)
DONE
Step 2
-I formatted a card with FAT32 ("e:/ fs: fat32") method on XP
-downloaded a ROM from here (Touch-IT Xperience v2.1)
-extracted the files
-renamed the .nbh file "Kovsimg.nbh"
-copied Kovsimg.nbh to the card detailed above
-inserted card into X1i
-powered off X1i
-entered bootloader mode
From there, the 4 color screen comes up and turns white. Phone says it can't find the image. returns to 4 color screen and says "serial" in the bottom color bar. I can pull the battery out and phone reverts. I'm not SUPER technical, so I don't know what I am doing wrong. Any ideas?
get the harspl app and flash it, after that it will get in to bootmode and automaticly flash from your card
Reversedhex said:
get the harspl app and flash it, after that it will get in to bootmode and automaticly flash from your card
Click to expand...
Click to collapse
I already have HardSPL on the phone. That was included in step 1 of the referenced link.
Try it again when the bootloader comes up does it say Olinex xxxx? If not then it didnt flash correctly.
Files are located here also:
http://www.4shared.com/dir/11652560/e8ada30/Sony_Stuff.html
WC
gregnm369 said:
I already have HardSPL on the phone. That was included in step 1 of the referenced link.
Click to expand...
Click to collapse
It did say Olinex!
Hmm... it must not have flashed correctly then. What causes that usually? I'll try again later tonight. Thanks for the heads up, guys!
if it's not finding the image file the hardspl won't make any difference, but it sounds like you've got that stage sorted.
I'm presuming the file isn't named correctly. Double/triple/quadruple check the file name on the card and that the file is on the root of the card. (I managed to get a space into a nbh file today, it didn't pick it up).
How are you copying the file across to the card? double check that its the same size on the card as it is where you downloaded it. However even if it isn't I still think that the bootloader will find it.
Try re-extracting it and copying it again.
fards said:
if it's not finding the image file the hardspl won't make any difference, but it sounds like you've got that stage sorted.
I'm presuming the file isn't named correctly. Double/triple/quadruple check the file name on the card and that the file is on the root of the card. (I managed to get a space into a nbh file today, it didn't pick it up).
How are you copying the file across to the card? double check that its the same size on the card as it is where you downloaded it. However even if it isn't I still think that the bootloader will find it.
Try re-extracting it and copying it again.
Click to expand...
Click to collapse
my EXACT path is "E:/Kovsimg.nbh" where E:/ is my SD card. File is verified on the card as same size as on the computer. I copied it with the drag and drop method between windows on XP.
I'm charging up the phone again to reload HardSPL
Thanks guys! Now running Xperience v2.1 and it is SO much better than stock!
What was the issue? Glad you got it sorted.
WC
I'm using the x1a (n.america) and i figured in order to make a backup of my firmware i would need the NAM (canada) stock rom instead of the UK one. (correct me if i'm wrong plz). And so i found this stock rom on this site, the exact one, even my provider's name was on it, and i downloaded it but it just came as an exe file and when i run it it just extracts/installs an image file (215mb) in a folder specified by me. In the tutorials it says that i need to put the RUU_signed.nbh from the stock rom in the kovsky folder... but i don't see that file anywhere, is it the same thing as the image file installed by the exe file? Do I just rename it and proceed??? PLZ answer this if you can because i have everything else prepared to flash my phone but this is the only thing holding me back...
Yes, if you're using the RUU method rename it to RUU_Signed.nbh if you're using the SDCard method rename it to kovsimg.nbh.
bgeorgi said:
I'm using the x1a (n.america) and i figured in order to make a backup of my firmware i would need the NAM (canada) stock rom instead of the UK one. (correct me if i'm wrong plz). And so i found this stock rom on this site, the exact one, even my provider's name was on it, and i downloaded it but it just came as an exe file and when i run it it just extracts/installs an image file (215mb) in a folder specified by me. In the tutorials it says that i need to put the RUU_signed.nbh from the stock rom in the kovsky folder... but i don't see that file anywhere, is it the same thing as the image file installed by the exe file? Do I just rename it and proceed??? PLZ answer this if you can because i have everything else prepared to flash my phone but this is the only thing holding me back...
Click to expand...
Click to collapse
You need to extract the RUU_signed bit from the image i am having the same issue and i write software for a living. Are you following the tutorial on how to back up your rom?
video guides
Im actually following BioVolt's video guides which I think u can find on this site if u search biovolt's video tutorials? they're really good and detailed but they're kinda long.
The exe contains a .img file, just rename that to kovsimg.nbh, and copy to the root directory of your memory card, and flash it.
Stalix said:
The exe contains a .img file, just rename that to kovsimg.nbh, and copy to the root directory of your memory card, and flash it.
Click to expand...
Click to collapse
it's not for flashing it is for doing a ROM dump in all the tutorials it does'nt tell you what clearly to do with the stock ROM once downloaded. But now i know along the same lines as your idea It just needs renaming to RUU_Signed.nbh then place this in the same folder as the 4 files you have allready extracted.
I have watched biovaults vids good but a little long for me.
I am in the same situation, and I'm totally new to flashing/backing up Rom's.
I'm also following BioVolt's Videoguides to start with but can't get hold of the Stock UK Rom.
Since I purchased my phone in sweden, unbranded I perfer to use swedish stock roms (If this even matters anyway?!).
So just to get everything straight, can I just download "Generic Sweden R3AA009 Software Update" from the sticky here in the forum, extract and rename the .image file to "RUU_Signed.nbh" and use this when I'm dumping my rom or did I totally missunderstand you guys?
Thanks in advance and sorry if I'm just way off with this question.
blondyz said:
I am in the same situation, and I'm totally new to flashing/backing up Rom's.
I'm also following BioVolt's Videoguides to start with but can't get hold of the Stock UK Rom.
Since I purchased my phone in sweden, unbranded I perfer to use swedish stock roms (If this even matters anyway?!).
So just to get everything straight, can I just download "Generic Sweden R3AA009 Software Update" from the sticky here in the forum, extract and rename the .image file to "RUU_Signed.nbh" and use this when I'm dumping my rom or did I totally missunderstand you guys?
Thanks in advance and sorry if I'm just way off with this question.
Click to expand...
Click to collapse
The reason we use uk roms is cos they they are WWE(world wide english) and the kitchen needs this to dump the rom.
the one you end up with will be an exact copy of your stock rom.
Yes just rename the uk one
Allright, thanks alot! Really helped me out.
Intratech said:
Yes, if you're using the RUU method rename it to RUU_Signed.nbh if you're using the SDCard method rename it to kovsimg.nbh.
Click to expand...
Click to collapse
It's a little OT but my X1 doesn't find the kovsimg.nbh file in the storage card anymore. Why is that? I've flashed using this method for months!
Ersill said:
It's a little OT but my X1 doesn't find the kovsimg.nbh file in the storage card anymore. Why is that? I've flashed using this method for months!
Click to expand...
Click to collapse
Uhm, I'm not sure really.. But ensure that you put the "Kovsimg.nbh" in the root of the storage card, not in any other folder. Might be a stupid answer but you might have missed this lil' thing.
Good Luck, Anton.
blondyz said:
Uhm, I'm not sure really.. But ensure that you put the "Kovsimg.nbh" in the root of the storage card, not in any other folder. Might be a stupid answer but you might have missed this lil' thing.
Good Luck, Anton.
Click to expand...
Click to collapse
Checked that...could it be a matter of storage card hardware? I had few problems writing on it through the card reader.
Ersill said:
Checked that...could it be a matter of storage card hardware? I had few problems writing on it through the card reader.
Click to expand...
Click to collapse
Might be, but you still should find the file if you successfully transefered it to the storage card...
Just to be sure, you haven't reformatted your storage card recently? It has to be in the "FAT_32" format to be flashable..
Can't really think of much else that gives you these problems..
So even if I'm using the X1a i should dump my rom with the STOCKUK rom? I read somewhere that if i flash my stock rom back on my xperia after it's been dumped using StockUK rom then my phone won't be able to connect on 3G etc.? Is there any truth to that, because im finding it impossible to dump my stock software using the NAM stock rom, kovskykitchen tells me that it cannot extract the ruu_signed.nbh
bgeorgi said:
So even if I'm using the X1a i should dump my rom with the STOCKUK rom? I read somewhere that if i flash my stock rom back on my xperia after it's been dumped using StockUK rom then my phone won't be able to connect on 3G etc.? Is there any truth to that, because im finding it impossible to dump my stock software using the NAM stock rom, kovskykitchen tells me that it cannot extract the ruu_signed.nbh
Click to expand...
Click to collapse
It must be uk ROM due to it being the only one that is guarenteed WWE the kicthen won't recognise anything else and when you flash back it will be whatever stock rom you currently have.
Hello people.
I have minor problem over here, I have flased my rom before but in a different way Through the xperia x1 phone with the usb cable in, all I had to do was to install a file through the pc.
But there is another way Id like to do it now, I have a .image file and have renamed it to "kovsimg.image" and I did also install HARD_SPL before.
To make it easier for u to help me.
1. Install hard spl
2. put the kovsimg.image into the memory card
5. Remoed the USB cable
3. turned of the phone
4. Pressed down lower sound and on/off button together (I got to the correct place where there are different colors.
5. Image file not found!
At nr 5., that is where the problem is. Why does it say Image file not found?
I have also tried with .nbh file 2, occuring the same problem though.
Thanks!
The filename should be "kovsimg.nbh"
sweflo said:
The filename should be "kovsimg.nbh"
Click to expand...
Click to collapse
But in another thread that is sticky, said that it can both me .nbh and .image
So the fact that was said is wrong I guess?
Well that will not either fix the problem, before the .image I tried with a kovsimg.nbh file and had the same problem.
Thanks
Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..
sweflo said:
Make sure the filesize is the same so you have copied the all of the file "kovsimg.nbh"
happens to me sometimes that there is missing a few megabytes and the phone dont find a image..
Click to expand...
Click to collapse
Im sorry but how exactly do you mean?
If you mean that the "whole" file maybe didnt get copied into the mem card?
It thats what u mean, I just checked it and both files are 213mb so :S
Check the spelling "kovsimg.nbh" and copy the file from the computer again
sweflo said:
Check the spelling "kovsimg.nbh" and copy the file from the computer again
Click to expand...
Click to collapse
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough
Freak174 said:
Atm I am downloadin a new Rom instead, there could be wrong this this I did download..
Btw, just a simple question. If I already have flashed a rom, is it possible to flash over a other rom?
I tried to make hard_spl over the one the Rom I already have, but no difference Well I will come back with information on how it went when I am complete with the download.
Thanks for takin ur time dough
Click to expand...
Click to collapse
You only hard_spl ones, you can make so many flashings you want but remember to do a hardreset after flashing..
did u try to search the forum?
http://forum.xda-developers.com/showthread.php?t=469300
boy, you really haven't read the stickys or haven't understand them fully...
just be glad that this flash-process is pretty stable and it's almost impossible to brick one's phone beyond revival.
read them again!
but to summarize it:
- you only have to do hard-spl once. until you flash stock-spl (that's not stock-rom!) it remains there forever.
- regardless if flashing via usb or microsd, the filetype has to be .nbh
- looks to me as if you didn't change the filetype of the image, but just the filename. so it actually is "kovsimg.nbh.image" right now, which will not be accepted by bootloader (the tricolor-screen-thingy).
check these two things before flashing again:
1. check if hard-spl was successfull:
take your sd-card out, and enter bootloader. it will now stay on tricolor screen. there it should read "SPL-0.72.OliNex". (among other stuff)
if it reads "SPL-0.72.0000" or "78" you haven't succeeded in hard-spl -> read the sticky again.
2. check the filetype of your image-file:
get your windows to show filetypes (how depends on which version, google it) and make sure the file's name is really just "kovsimg.nbh", nothing more.
(via usb-cabel it has to be "ruu_signed.nbh", btw)
put the kovsimg back on your sd-card (directly to root, meaning not into a folder), put it back in and enter bootloader again. follow the instructions on screen.
if you followed these instructions correctly, it will work now.
to flash any other roms in the future you just have to name the file right and put it on your sd-card -> bootloader. (again, hard-spl will not be needed.)
after flashing finished do a hard-reset! when flashing via sd you have to take the battery out and back in to do a restart. that's the perfect moment:
- take battery out
- put it back in
- press and hold (!) the two silver-buttons under the screen
- press the power-button shortly (while still holding the two silver ones!)
- phone will vibrate and enter a white screen
- release the two buttons and follow instructions on screen
When you downloaded the ROM did you make sure to extract it first with either WinZIP or WinRAR before you renamed the file? ALL ROMs are compressed usually with WinRAR to save time uploading. Then you download and extract the file. Then you rename the image file to the respective name on how you wish to flash your phone.
Thanks for the replies but the problem is still here :/
I checked the bootloader and it said "SPL-0.72.OliNex", which means I have installed the HARD_SPL correctly.
Atm I have Energys rom installed, but I didnt install it the same way as this way I am trying to do now. I just had to have the cable checked in and follow an installation and it was done.
Right now I have tried with several roms but none has worked, for the moment I am trying to get this rom to work "Valkyrie_v3.8 FireStorm" without success ofcourse..
I did everything correct, I know that I have. I also followed a video guide to check I made it correct.
The file name is kovsimg.nbh (Ive checked it and it is a .nbh file, my brother also confirmed it).
When I try to flash it, the USB cable is out, the phone is shut (tried to pull out the battery 2), but still the same problem "No image file!".
And yes, I did first extract the file. The size has the same amount as in the winrar file so nothing is missin. After that I changed the file name and copied it into the root of Memory card.
PS. Is this the only way to flash it, I mean is it not possible to do the same way as I did with energy's? (Its the same way as installin HARD_SPL)
Try using a different SD card.
Im Packing said:
Try using a different SD card.
Click to expand...
Click to collapse
Befor this make sure your microSD is Formatted to fat32 using a PC. If not, it will not work.
or you could just do it the same way as the energyrom
i.e. customRUU.exe
well, sounds like it's your sd-card. probably formating it again with fat32 will help. there are also reports of some sd-models/brands not working at all. there's a thread for this by gtrab, i think. although there it says "kingston" cards don't work at all - i'm flashing with a kingston 8gb for almost a year now... ^^)
if you choose to get customruu.exe for usb-flash DON'T use the one from hard-spl, that's a special one.
try remove SD card and flash without PC
The SD-cards format is Fat32, but I used a different way this time by doing as Jonny~ mentioned and it worked all fine!
Thanks for the help, great service.
Take care and wish me luck in the future with my xperia