youtube videos etc - Tilt, TyTN II, MDA Vario III Themes and Apps

Hi All
I've had this problem once before, due to O2 not allowing streaming video over there network (except on the crummy I phone) but after installing tcpmp and skunkworks video bundle all was well.
Unfortunately its stopped working recently I keep getting an error message saying the link is invalid, is there a new version of tcpmp available or the video bundle to overcome this recent problem
Also does anyone have a torrent for wm6.5 for the kaiser?
Regards,
Mark

YouTube changed the streaming link format so alot of programs stopped working, CorePlayer best bet, re: WM6.5 go to ROM Development "read the sticky as will provide information from noob flashing to radios etc"

Related

TCPMP & flash bundle error

I've installed tcpmp & flAsh bundle to watch youtube video but I get this error when I try to play or save any video...
"Videoloader"
youtube swf args not found
Please Help
same error here.
I'm getting youtube vids fine, and i use TCPMP with the FLV 0.4.2 plugin (not sure if that's the same thing, but if it is, you can shoot me for my lack of knowledge)
I Use the one from Dutty, and it works good.
I uninstall and reinstall also the dutty but it gave me same error.
Is the program should be installed on the pda memory or on the sd card?
Are you viewing them on the website or YouTubePocket?
No, i use normal www.youtube.com
Aleph83 said:
I uninstall and reinstall also the dutty but it gave me same error.
Is the program should be installed on the pda memory or on the sd card?
Click to expand...
Click to collapse
I installed both tcpmp & flash bundle to on-board memory and full youtube vids play fine.
Aleph83 said:
I uninstall and reinstall also the dutty but it gave me same error.
Is the program should be installed on the pda memory or on the sd card?
Click to expand...
Click to collapse
I installed both tcpmp & flash bundle to on-board memory and full youtube vids play fine.
Uninstall any versions of tcpmp & flash bundle, then Install the versions below - tcpmp first, then flash bundle, then soft rest. That's it - full youtube vids will work now.
is it working now for you? I mean, at this time. Isn't possible a problem on youtube? Isn't it?
I've got always same error as above... It seems it cannot handle video with the core player
agrif78 said:
I installed both tcpmp & flash bundle to on-board memory and full youtube vids play fine.
Click to expand...
Click to collapse
Wow, I thought this was impossible. I've had Flash installed once and it froze the hell out of PIE and Opera. Maybe I'll try these and see what happens.
I should probably also ask what browser you are using? Opera Mini isn't cable of Java and flash right?
**UPDATE** Gave it a shot in Pocket IE ad it says Media file type not supported. I got Tcpmp installed as well, leats I think its a current version.
I'm using IE on wm6.
Hi,
I experienced the same problem with the same configuration.
I think youtube's currently modifiying its way to display the video through
the desktop version of the website.
Unfortunately, the Htc device's owners (maybe the others mobile WM6 owners)
would not be able to display the youtube's video in the future.
I hope it will not the case !
I'm using WM6 with explorer on my xv6800. I removed all other TCPMP and Flash bundle versions and installed the ones that agrif78 provided earlier. Still sadly no dice. I still get the same errors whether I choose "play file" or "save file".
please bookmark this page
it updates whenever youtube changes its files
http://discussion.wmexperts.com/showthread.php?t=148801
then just possibly, we may have fewer posts about youtube and tcpmp
Ok I installed the newest version of vTap This little app will allow you to search specific videos and play them, so if you happen to know the title of a video clip you want to watch, this works great. It also displays the web address of where the video is located and I have successfully played some from the youtube. However it will not allow you to play videos directly from the website.(or at least if it does I have not figured it out, maybe someone could shed some light on that tidbit of info?) In short, you can seek out specific videos by title and watch them, but you still can not watch them directly from your web browser on the youtube site. But at least maybe I can still watch some of my favorite funnies until someone smarter than me comes up with a better solution. I'm pretty new with the whole smartphone and pda scene so if I have left out anything then please feel free to correct me. I hope maybe this has helped out some folks.
sorry about that ekw. I just noticed the post. Thanks for the info!
flash bundle
i got it to work. the main thing is to remember to do a soft reset after installing player and bundle
Help Plz!
plz, i'm installing the flash video bundle on my WM6.1 and i have this error:
Failed to install. Could not install the program or the configuration because it does not have the necessary permissions system.

can someone help me with siriusCE been searching forever!

wmp10 says something about the player supporting the format im trying to play and tcpmp says it cant open url. ive searched everywhere.
can someone please help
thanks
try siriuswm5 from geekstoolbox.com
sirius
i posted a thread a while ago
http://www.geekstoolbox.com/
this is the site you can get it from directly
awsome got it to work on WMP tcmp says i dont have the correct codec
i used the standard windows media player and it worked perfectly
See my related article in the Wiki
New HTC Kaiser, AT&T ROM 1.62.502.0
SiriuCE 2.0.1sp
Windows Mobile 6 Pro
Updated the Channel list fine, logs in fine
Using WMP10, it is invoked saying it is 'locating' and after what I think is 60 or so seconds, then returns the error "cannot play the file. The file is either corrupted or the player does not support the format you are trying to play"
Using TCPMP 0.72RC1 (latest) I get "Can't open URL"
I've tried variations of soft resets and switching players, so far no luck.
You mention a wiki article, but i am unable to find it in the long list of links in the XDA-Wiki page...if you think that might help me resolve this issue, can you link to it please?
I wonder if this isn't a compatibility issue with the latest Compact Framework that ships with this ROM/WM6? Not sure at the moment how to remove this....thoughts?
Thanks very much
UPDATE:
Resolved.
Uninstalled
Reinstalled from GeeksToolBox: http://forums.geekstoolbox.com/showpost.php?p=3292&postcount=2
Added WM9 Codecs: http://forums.geekstoolbox.com/showpost.php?p=1983&postcount=3
I also installed TCPMP from that link, but didn't need it.... soft reset, loaded SiriuCE, and bingo - Sirius on my Kaiser under WM6.

Youtube working with HTC streaming media

Hi all,
This is my first post but I hope it will help. Also, beeing french, it might be crawling with mistakes.
I've been looking around for a way to have youtube working on my Kaiser. Here is what I wanted :
- possibility to launch youtube videos from the m.youtube.com site
- possibility to watch TV (from the SFR portal page)
- using HTC streaming media to play the videos
Here is what I did not want :
- using youtubeplay (which is a great app but I like to be able to search or to play specific videos)
- using the TCPMP plugin (for no specific reason except the I was deadlocked on using HTC streaming media)
My config is :
- HTC Kaiser
- ROM : ROMeOS v4.1 with some tweaks for french (keyboard mainly)
- SFR Illymithics (France)
After several unsuccesfull atempts (despite searching the forum), I finally found a solution.
First, I installed the HTC diamond streaming player found in this forum (thx P1Tater for posting it). Appart form updating the app to a newer version, I did not change the fact that I couldn't play videos. The error message was always the same : "error connecting".
Second, I added the following REG key :
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StreamingDShow]
"OpenOriginalUDPPorts"=dword:00000001
Videos are now working perfectly.
For the record, I did not find the solution. A friend of mine had the same problem with his Diamond. He found a cab version of HTC streaming media which seemed to work. I tried it on my Kaiser and except for the VGA interface, videos did work perfectly. I then compared this app with the one listed above and I found 2 differences :
- the above reg key
- a newer version of Emz3GPStreamingFilter.dll
The new DLL did not seem to improve anything so I just droped it.
Since the Diamond working cab was sent to me by email, I don't want to post it here 'cause I do not know where it's from. It's called Tom's HTC diamond streaming media (or something similar) if you wish to look for it.
Well I hope this help.
Thanks for your feedback but.... the m.youtube.com already works fine with the french shipped rom, isn't it ?
I don't know about the French shipped Rom. If you mean the WM6.1 FRA found here, it did not work for me. I did not try going back to the the SFR ROM which is still in WM6. i tried several other Roms (French or others) found here but had the same issue. What's your Rom based on ? Any preferences on the existing roms ?
Thanks for your post. I am facing the same problem ...
the registry key that you mention, how did you find it?
Nice, I'm going to have to try this out. I keep getting the "connecting" issue.
for your first post this is good work and another way of getting youtube to work for people.
-youtube player works great
-skyfire as well
add your tweak to the list (although I haven't tested it yet I acknowledge you and your friends discovery)
Tna said:
Thanks for your post. I am facing the same problem ...
the registry key that you mention, how did you find it?
Click to expand...
Click to collapse
Well, as I explained, after trying several version of the streaming media app, I finally stumbled upon one that actually worked. Since it wes for VGA, I had to find what difference there was to other streaming media app.
I do not know what this reg key means or even does. I just point out that whithout it I could not get youtube video working.
-youtube player works great
-skyfire as well
Click to expand...
Click to collapse
Well, I know youtube player works. However, you can only see predefined feeds (or maybe you have another version of the player)
I do not know about Skyfire but it says you have to be in the US to get it so I ll have to wait for the first official release.
Thanx alot!!
Maybe the solution
I had that problem to.
it wasn't even possible to connect with messenger .
what i did was..!!
I have disabled the proxy using of my g/3g/HSDPA connection and it works fine with streaming media on my tytn2 kaiser..!
I hope this will solve your problem..
How To;
1 go to start
2 Go to settings
3 choose tab connections
4 click on connetions.
5 modify excisting connections
6 choose tab proxysettings and disable the using of the proxyserver
I hope this will solve your problem..
Let it know if it solves your problem too..!!
Greetz Emre
I screwed htc media...
I think I screwed htc streaming media.
I have an XDA Orbit II with htc streaming media 2.2 (built 1026.711) pre-installed. I could open Youtube videos from Explorer with no problems.
I installed flash player 2.1, real-player and TCMP as I was playing with Opera 9.5 (as many of you…)
The result is that htc streaming media (using Explorer) is not associated with youtube videos anymore. I have removed all other players form the ppc but it still doesn’t work. Every time I click on a video I just see the opening bar for 1sec and that’s it.
I tried to re-install htc media I found in the post but It doesn’t work (installation unsuccessful).
Does anybody know how to configure the htc again?
I went in the reg but I don’t know the keys to change.
Please help
I'm very thanks for you
First, I installed the HTC diamond streaming player found in this forum (thx P1Tater for posting it). Appart form updating the app to a newer version, I did not change the fact that I couldn't play videos. The error message was always the same : "error connecting".
Second, I added the following REG key :
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StreamingDShow]
"OpenOriginalUDPPorts"=dword:00000001Videos are now working perfectly.
Click to expand...
Click to collapse
I've downloaded HTC diamond streaming player from the link and added the registry but still won't play after showing Buffering activity for 7 secs.
Help please....
Great! Thank you very much for this registry key:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StreamingDShow]
"OpenOriginalUDPPorts"=dword:00000001
Thanks.
>>JS>>
My reg key is ok, but i can't stream video from youtube app and m.youtube.com
In my app says, connection error, i have working 3g internet, everything is ok, only youtube stream. Any idea? i have HTC Diamnond Touch (DIAM100) wm6.5 sense 2.5, ROM: Freya WWE 23134
This rom is perffect form me, but streaming is not ok. Thanks
Is there any youtube downloader that is working on this device?

Still cant get youtube to work...

Yes, I've searched and searched, this forum and others and can't seem to get this to work. I've installed the Flash Bundle and TCPMP, in the same place and neither IE or Opera 9 will stream even youtube mobile videos. What am I doing wrong?
BTW, stock ATT tilt WM 6.1
Thanks
Google youtube play
its an awesome program that allows you to play videos as well as save them and convert them into audio files which is pretty sweet for ringtones
haha
Oh and if you really want it browser style try skyfires new browser
opera mobile 9.5 is still in beta and does not currently support video
Or flash the latest official HTC WM6.1 ROM. It is the STREAMING MEDIA PLAYER integrated and works without additional configuration even through Pocket IE.
download skyfire browser and you should be able to view youtube videos with no probs or any video
Junner2003 said:
Or flash the latest official HTC WM6.1 ROM. It is the STREAMING MEDIA PLAYER integrated and works without additional configuration even through Pocket IE.
Click to expand...
Click to collapse
I flashed the latest official HTC WM6.1 ROM as soon as it was released from AT&T a couple months ago, and still nothing (not PIE not Opera, not Iris) will stream video for me except Skyfire.
Just a quick question... did you do a soft reset?
If so and it still doesn't work then unistall your tcpmp and flashbundle.
I was having the same problems until I installed this combination of cabs.
1 TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB
2
Obviously, install to the same location, soft reset and let the videos begin. To see applicable websites go to start\programs\video sites.html
Hope this works for you.
a solution if you're willing to pay a bit
I used TCPMP with the flash bundle with no problem for WM 6.0, but started having trouble with the 6.1 version as well. My solution... go with the upgraded version of TCPMP (CorePlayer). Yes, you have to pay for it, but it can allow for direct search/play of Youtube videos. It's also a pretty fanfreakintastic media player. It's going to cost you about 30 clams, but for me, it's well worth it. I've been playing videos and music with it nonstop since WM 6.1 came out without any problems. No crashing, no excessive pauses, nada.

[Q] youtube for HQ (VGA) videos

i tried:
- search function...
- the inbuild youtube from my new energy ROM, the search button isn't working
- the latest official google youtube, it's laggy and no videos in HQ
- WHC youtube, didn't find the start file
- coreplayer v.1.3.6 #7427, the videos do not start
help!
edit: a cab for a working youtube (also HQ) would be great!
Are you positive because I just did a search from the youtube app, using the ROM in my sig/signature. Course, I have a different device but I am posting in the RAPH/TP section. You'd be the first to post about it here...
the youtube app from energy ROM (made by HTC?!) is great, but the four big buttons don't work for me - but i can take settings, watch most viewed and filtering works also.
and yay, i'm the first....
Lolz... the reason I mention that you'd be the first is because usually if theres a device issue, it is posted in that specific device's forum OR if you believe this is a ROM issue, there isn't anywhere here to post it because if you flash A RAPH ROM to a DIAM, you'll be lucky to get it to running!
Basically, try a re-flash(I wouldn't suggest flashing a RAPH ROM by that mater) or you could wait for others to respond

Categories

Resources