My HTC TD2 was unlocked CID to V1.83 Olinex and was upped a few roms by PC. Suddenly, I couldnt up a new rom by PC. When running the RUU, the error message displayed : "The Update Utility can not connect to your PDA phone. Please check your USB cradle/cable....".
I tried to change the sync cable, PC, installed the NetCF 3.5 on PC, but they were useless. But I upped Rom by storage Card successfully.
Anyway, I still want to up a new rom in the future by PC and I wonder if my PPC has some error in hardware or not.
Pls help me!
Related
I have a I-mate PDA2K with ROM 1.12 ITA and while I was to install the 1.40 ITA ROM downloaded from www.clubimate.com, the screen of my pocket pc became black, active sync has closed and the program to update the ROM is remained blocked in checking the hardware.
Now the pocket pc present only the notice "Serial v. 2.06" and do not respond if I press the on/off button.
How can I reinstall the system with the old ROM or the new ROM???
Active Sync does not see the pda2k.
Please, help me!!!!!
Thanks and sorry for my english.
Best regards,
Enrico.
did the flash fail halfway through? if it never started you should be able to just reset it and be back to normal.. try to put it into bootloader manually "power+record+reset" and you'll get the serial 2.07 screen, then dock it in your crable and it should say USB 2.07 and your PC recognize it.. run the flash again
No, I have pressed "power + record + reset" and inserted the pda2k in the craddle, but the notice is "serial v2.06" and not appear "usb v2.06" adn the program to flash the rom notice "Error 101: connection error" because not see the device.
Have you ever changed the Sync Cable? There would be some probs with your cable!!!
I tried to remove and then replace the battery and I inserted the pda2k in the cradle. Now the notice is "USB v2.06", I tried to reinstall the ROM tonight but the program is remained blocked with the notice "checking the information on your device" for all the night and the Active Sync crashed. Today I detached the device and the "error 101: connection error" appear.
How can I install the ROM directly?
I'm having the same problem
The cradle is ok for sure
but no connection to activesync
help is needed
Best regards
Paulo
WOW ... WOW ... WOW ... WOW
I resolved my problem!!!!!
I noted that the file downloaded from the original website clubimate is composed from varied file inside.
One of these is for checking hardware device and one of these is for upgrade the device.
But the file downloaded is an executable file complete and when I executed this, the program was blocked during the checking.
Now I think that if I unpack the exe file with winzip in a directory and I execute the only file to upgrade the ROM, I avoid to do the check of the pda2k and maybe it function.
This is the solution.
The upgrade started and now I have my pda2k like first one.
I hope it is of help for other.
Bye and thanks at all.
Enrico
Heloo every one ... i'm tired from this pda p3600 ... since 4 day's i wanna to upgrade my rom from wm5 to 6 & the upgrade process didn't work ... i try everything .... but non is work ...
first i was trying to make upgrade through windows vista home premium but didn't go well & this is the photo for my problem :
http://www.freewebtown.com/Haitham/CIMG0511.JPG
http://www.freewebtown.com/Haitham/CIMG0512.JPG
http://www.freewebtown.com/Haitham/CIMG0513.JPG
http://www.freewebtown.com/Haitham/CIMG0514.JPG
http://www.freewebtown.com/Haitham/CIMG0516.JPG
then i try to upgrade through my freind windows xp ... and also didn't work good .. the error message say that the phone is unable to upgrade do u rom flash or something like that ... so i try to instal the unlock & also same message ....
i'm in **** mood ...
any one can help me please
Until the new version of WMDC is released with fixes, I suggest you use XP computer to do upgrade.
New WMDC v.6.1 coming soon: http://windowsvistablog.com/blogs/w...ows-mobile-device-center-6-1-coming-soon.aspx
The XP computer needs to have Active Sync 4.5 installed. Reboot xp computer before starting, to clear any existing syncs. Delete current sync profile on Trin. Connect to pc via usb as usual, let ASync run, but cancel when it tries any profile, you are left as: Guest sync
You should be connected now. Upgrade rom file should be extracted in explorer, e.g., so you can see all files. Run RUU wrapper or ROMUpgrade exe, depending on rom you're using.
If you go through process, & get error message. Don't disconnect Trinity. Close that page & start again. It should work the 2nd time. When it's working, you will see the boot screen, color bars & at bottom usb notation. (If it says serial, you'll have to, unhook usb connection, reboot computer, re-sync to guest status, & start again.) Then the update screen on Trin will show % bar, if process is working correctly.
If you still get error message, then check Trinity Wiki info as rom upgrade problem FAQ is there. I'll assume your Trin is unlocked. Check boot screen on Trin to see boot loader info. Wiki explains how.
Also: Use SSPL software Bootloader solution from "Des" - this loader ignores the CID and the upgrade will work also with wrong CID. See also http://forum.xda-developers.com/showthread.php?t=293632
If you still have problem, come back here & give info:
1. What rom is currently on Trin? What radio?
2. Did you buy an unlocked Trin? Exactly, what device do you have?
3. What wm6 rom do you want to upgrade to?
Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!
please add which rom you currently use, do you have activesync installed
Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !
Sorry !
Yes I have Activesync installed (for another palmsize divice).
What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.
Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.
night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.
Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.
you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync
Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.
For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5
hi guys... i was updating my rom as usual, but during update "image file corrupted" error occured and my p3600 has died. i tried some suggestions from the forum, i tried camera+power+soft reset combination and after that updating the rom again but i stops at 1%. So i tried mtty.exe but it says "cannot open USB port". PLEASE PLEASE HELP ME ... (i use Windows XP SP3)
please guys... there're 220.000 active members here. i'm sure somebody knows the solution for my problem...
try using official rom from HTC website
go to the bootloder screen and then try using official rom from HTC website
best
nat
I have never been able to load images via the USB connection. I just take a memory card, copy the rom image to the root and change the name to RUU_signed.nbh hardboot and it loads. And I keep a original HTC rom to fall back to.
Hi, I've an Ba with WM6.5 in it. But when I want to reflash it, the BA wasn't detected by my computer. I've put it into the bootloader mode, but it just shows Serial, even I've waiting for almost 2 hours. But when I boot the OS, it can connected to the PC via ActiveSync. What's going on here?? Is my BA or my cradle broken??
are you running XP if so open CTRL ALT DEL then look for wscesscom or somthing and end task and then WcessMgr OR somthing and end task and try
You should see Troubleshooting in the WIKI ~ http://forum.xda-developers.com/wiki/ActiveSync
I've done all of that, but still not working. I think it's not in the activesync, because I can connect my BA to the PC, the problem looks like in the bootloader mode.... It just standing there shows "serial" and "V2.07", even I've connect it to the USB port... Any ideas??
Is there are any possibility I can repair my bootloader (if it's really broken)??, or Can I reflash my BA with other way around?? Without using the bootloader maybe??
UPDATE:
Later, I think I began to recognize the problem...
In every tutorial for Win7 that I read (this tutorial and d-two's tutorial), I was ask to update the driver of "Microsoft USB Sync". But in my case, that "Microsoft USB Sync" wasn't shown. I think it's because I haven't sync my BA with the PC yet (I've just reinstall my Windows, so all of the setting is gone). If you sync your BA, you will get the "Microsoft USB Sync" on your device manager.
But now, the problem is, I can't sync my BA with the PC, because of error in my PIM (Contact, Calendar, Task, Phone, Messages, etc). I only able to explore my devices through ActiveSync/Windows Mobile Device Center, not synchronize it. Even my ActiveSync/WMDC shows an error on the connection. So, I can't update/install the driver for "Microsoft USB Sync", because my BA have an error connection with the PC. Any ideas to solve it??
And would cloning method worked for my devices?? I mean, I get a cloning from another BA, install it in my BA, and then repeat the reflash process with my preferred ROM??
Please, need help over here....
try a hard reset
Broken Power Switch ...
Dear experts,
My device is PDA2K, last week i did upgrad from original windows to WM6.5 Pro_QVGA, Radio 1.12.00 ...... but the power switch is broken
..... as your experience how did that happened!!!! it was on cradle connected to WinXP, but since that day i'm trying to do flashing to install another Windows ...... i failed ...
Please Please Please .... Help me to do flashing or formating from pc or sd card ... because i'll never get into bootloader in my life.
Thank you ...