hi all am new to the android scene, i have just purchased the HTC Legend, and cannot access the internet, i can only access the internet through wifi, so any help would be very gratefull i am on o2 many thanks in advance
Moved as not ROM Development.
Attached o2 pre-pay settings .cab install to device and run will set up GRPS & MMS, has restrictions as o2 doesn't allow email retrieval.
If you don't use MMS you can use these GPRS Settings.
o2
Access Point: payandgo.o2.co.uk
Use Name: vertigo
Password: password
Then you get email.
Hope that helps.
mms settings
thanks for your help they have worked a treat you really do know your stuff thanks once again
That's cool just happy to help
Mem when moved to o2 the amount of trouble it was to set up till found .cab then, the email problem to which sometimes would sporadically work, to then finding the vertigo settings and being happy, trade MMS for Email any day
Related
Please help i need the T-Mobile Network settings cab, I've search and can't find it. And its not on the FTP
Please can somone post the cab file for the T-Mobile USA Network setting cabs. Thank you
weezy said:
Please help i need the T-Mobile Network settings cab, I've search and can't find it. And its not on the FTP
Please can somone post the cab file for the T-Mobile USA Network setting cabs. Thank you
Click to expand...
Click to collapse
what Version Rom are you running?
yes, i need it too. i just updated to Mistki's ROM and it has no tmobile setting at all.
just call tmobile's wireless data group dept and ASK them for the mms settings
they don't need the settings the option FOR mms is gone from a few firmwares...
This is the link for the T-Mo extended rom
ftp://xda:[email protected]/Wizard/Extended_Roms/TMo-US-Ext_ROM.zip
Unzip it and the file you need should be in there. If you need the mms composer, I think this is it
ftp://xda:[email protected]/Uploads/ArcsoftMMS_3.0.7.6.cab
Mind you I'm not sure if this will help at all, how did you loose your MMS settings in the first place if I may ask?
An actual answer to the original question is:
Gateway: 216.155.165.50
Messaging server: http://216.155.174.84/servlets/mms
Port: 8080
WAP Version: 2.0
Connection: The Internet (assuming that's your primary connection)
This is also easily found in about a million places via a google search.
i recently got a Vario III from T-mobile its been unlocked to any network and now i have an O2 UK sim card in it. The problem i have is that i can not send any mms messages. I asked O2 to send me the settings. They said they'll have to send by e-mail. 2 settings were send to me one for internet which works fine and the second one was for mms. Unfortunately the second setting was an instruction to click on a button that is only availible on their XDA stellar. I repeatly asked for O2 mms manual settings but they kept sending me the same thing. I resorted to keying my own settings in that i found on the web.
Under mms settings server tab.
Server name: O2UK
Gateway: 193.113.200.195
Port number: 9201
Server address: http://mmsc.mms.o2.co.uk:8002
Connects via: o2 (The internet settings which works fine)
Send limit: 300k
WAP Version: WAP 2.0
Even with these settings i am still unable to send or recieve MMS messages. I suspect the icon button that O2 are asking me to click on is a cab file thats stored on the XDA Stellar maybe this cab file is my solution?
Any help would be welcome.
9 months ago I upgraded from a Mini S to a Trion. The Mini S didn't have the correct settings in it, so I had to install them manually.
However, I never managed to get it completely right. Sure they worked, I could receive and send MMS messages, then I found that it was going over the "wrong" connection and was costing me both messages and data, so do watch out for that one.
On my new Stellar, it does seem to be working with no side effects, although it switches from one thing to another to send MMS messages. I'll try and copy out the data I have on mine. If you need more, do ask...
Start -> Settings -> Connections -> Connections
"My ISP" -> Manage connection
Name "Mobile Web",
Modem Cellular Line (GPRS, 3G)
Access point mobile.o2.co.uk
Username O2web
Password (Think it is "password", see here)
Domain <empty>
-> Advanced
TCP/IP-> Use server assigned IP, rest deselected
Servers -> DNS 193.113.200.200 193.113.200.201
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point wap.o2.co.uk
Username o2wap
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
Start -> Messaging -> Menu -> MMS Options -> Servers
Name "O2 UK"
Gateway 193.113.200.195
Port 8080
Server Address http://mmsc.mms.o2.co.uk:8002
Connect via "My Work Network"
Send Limit 300k
Wap version 2.0
Hopefully all that makes sense if you work through it.
"My ISP" are the internet settings are that I use to browse the web. "My Work Network" appears to be O2's WAP settings and is used to send MMS messages, so it looks like you might need to use it for that.
I'll also have a look and see if I can find the cab you were on about.
I hope that helps.
Please forgive the double post, I expected it to take longer to find.
I honestly don't know what each of these do, but they are all the cabs I found in /windows. I am assuming the smaller ones are the actual configurations themselves and the O2 Custom thing is the application that will install everything else. The "plugin order" cab file makes me wonder if this also has a bunch of today plugins attached to it, but I honestly don't know (I haven't hard reset without installing the extRom and have not used any other WM6 devices).
Does WM6 come with a bunch of today screen plugins for things like running programs etc... ? (ie beyond dat/time, calendar, tasks and messaging). Before this I only used WM5, so I don't know if you're going to get a bunch of extra today plugins tagging along (they aren't *bad*, they're just pointless if you read these forums as you'll no doubt either get better for free or have bought something like Mobile Shell).
Let me know how you get on.
Thanks for your help. I aligned all my settings to the same as yours but made no progress what happens is the message tries to send and is placed in the outbox but never succeeds. So I had a look though the cab files you kindly uploaded, the only file that looked like it maybe the one i need is MP_MMS4.0_O2UK_POSTPAID_Kaiser_070809.cab. So i ran it from my memory card the result was not good. the mms doesn't even go to outbox now. hehe. oh well i could always restore the rom and maybe stick to a t-mobile sim card if a want to send mms. unless you have any other suggestions?
Am i the only person trying to use a Vario III with a O2 sim? Surely there are others but i guess mms messages aren't a function people use that often.
The following page on the O2 website allows you to have the settings sent direct to your phone as an SMS:
http://getsettings.o2.co.uk/ServeSettingsWebApp/
I'm not an O2 user, so don't know if this works or not. Sorry if you've already tried this.
Ninimoe said:
Thanks for your help. I aligned all my settings to the same as yours but made no progress what happens is the message tries to send and is placed in the outbox but never succeeds. So I had a look though the cab files you kindly uploaded, the only file that looked like it maybe the one i need is MP_MMS4.0_O2UK_POSTPAID_Kaiser_070809.cab. So i ran it from my memory card the result was not good. the mms doesn't even go to outbox now. hehe. oh well i could always restore the rom and maybe stick to a t-mobile sim card if a want to send mms. unless you have any other suggestions?
Am i the only person trying to use a Vario III with a O2 sim? Surely there are others but i guess mms messages aren't a function people use that often.
Click to expand...
Click to collapse
Hang on, you on payasyougo? Am fairly sure they have different usernames and passwords, access points etc.....
Try again as above, but with the following change in the relevant section.
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point payandgo.o2.co.uk
Username payandgo
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
The "My ISP" settings will also probably need to be changed, but you said you had that working so I shall assume you know more about that than me.
Cavey.co.uk said:
Hang on, you on payasyougo? Am fairly sure they have different usernames and passwords, access points etc.....
Try again as above, but with the following change in the relevant section.
"My Work Connection" -> Manage Connection
Name "O2 Active"
Modem Cellular (GPRS, 3G)
Access point payandgo.o2.co.uk
Username payandgo
Password (Probably "password" again)
Domain <empty>
-> Advanced
TCP/IP -> As above
Servers -> "Use server assigned addresses"
The "My ISP" settings will also probably need to be changed, but you said you had that working so I shall assume you know more about that than me.
Click to expand...
Click to collapse
On top of this you need to go through a specific proxy as follows:
HTTP: 193.113.200.195 Port 8080
WAP: 193.113.200.195 Port 9201
Secure WAP: 193.113.200.195 Port 9203
Socks: 193.113.200.195 Port 1080
Also a note, I wasn't able to get MMS working untill I Flashed to Dutty's WM 6.1 Hybrid ROM
Audio said:
On top of this you need to go through a specific proxy as follows:
HTTP: 193.113.200.195 Port 8080
WAP: 193.113.200.195 Port 9201
Secure WAP: 193.113.200.195 Port 9203
Socks: 193.113.200.195 Port 1080
Also a note, I wasn't able to get MMS working untill I Flashed to Dutty's WM 6.1 Hybrid ROM
Click to expand...
Click to collapse
Good shout. My phone keeps setting my HTTP and socks proxy to 127.0.0.1 in order to match the desktop computer (stupid, stupid activesync) so I had ignored it. I didn't realise there were more settings in there that could be relevant.
It seems the very important ones are the WAP and secure WAP proxies (which activesync doesn't seem to be configured to break). Mine are set to the values given by Audio.
fisha21 said:
The following page on the O2 website allows you to have the settings sent direct to your phone as an SMS:
http://getsettings.o2.co.uk/ServeSettingsWebApp/
I'm not an O2 user, so don't know if this works or not. Sorry if you've already tried this.
Click to expand...
Click to collapse
Unfortunately O2 can't send mms settings to kaiser and probably not any phone that uses WM6 but it was worth a try. thanks
Cavey: I'm on contract with o2 so the initial settings you gave me should work but doesn't. i've tried keying Audio's proxy settings in too, but still no luck. I also restored the phone to its factory settings then re-keyed all the settings in, the result is still negative.
As you mentioned, O2 are charging for the unsuccessful attemps of sending mms. I have 500 sms but 1 mms = 4 sms. i'm running out fast so i think i'll give it a rest for not until my allowance resets.
Maybe i'll follow in Audio's tracks and install a Dutty rom. only had the Vario III for less than 1 month though and know very little about flashing the rom on this phone.
Cheer's for everyone's help for now.
FINALLY!!!!!
I can send and receive mms on my (unlocked) t-mobile TYTN III using an O2 sim card. All of Cavey's setting were right the only difference is I had my phone flashed by T-mobile from wm6.0 to wm6.1
I was having alot of trouble with the phone as i was no longer a T-mobile customer hence the O2 sim card, they were reluctant to do and repairs for me, but the phone was still under 1 year so definately under their warranty.
For those interested in the problem i was having. All i had to do to cause the phone to crash was do a hard reset via the little hole at the bottom of the screen. The problem then arise.
-only be able to make 1 call before i need to reset again
-screen won't tilt when i slide out keyboard.
-if any event starts the phone vibrating it wouldn't stop vibrating till the battery runs dead
Solutions:
-don't do a hard reset (not always possible) plus the problem can randomly occur.
-hard reset the phone whilst charging
If anyone fall under the circumstance whereby they are no longer under contract with T-mobile, but the phone is still under warranty. Tmobile will have to honor it. Receipts will help you prove this. They'll say things like its impossible to send your phone to repair, because you don't have a t-mobile number for them to setup the repair form, but it can be done. They'll have to assign a PAYG sim (provided by the shop) to the phone. That's basically it.
Anyway after all that i have a new rom and it accepts the mms settings that cavey posted for me. Been such a long time my O2 contract is almost up and I'm looking at new phones.
Thanks to Cavey, Audio and fisha21
hi there really silly question, ive noticed when i flash a rom it installs and then afterwords sets up the device and picks up what network I'm on and adds the settings for wap/gprs mms etc, i was wandering if there's a way of getting this in one cab or how i would go about making it, reason i ask is i have several pda devices that don't work for mms even tho they should thanks
thanks for any help
Not really sure what your question is.
How to make a cab?
How to automatically connect many devices to your network?
How to configure settings?
There are several Wikis and FAQs to get you started. Read grasshopper, and see my sig. Good luck!
I think he wants to be able to export his settings (wap / mms / proxy etc...) into a CAB in order to import it after flashing his phone or to import it into another phone.
If you have a common provider (ATT / Vodaphone / SFR etc..), the easiest way is probably just to use the Automatic Connection Setup / Network Wizard that will set up all those settings automatically for MMS, WAP etc..
Help
Pls can anybody help with network wizard for HTC kaiser,my network service provider is MTN NIGERIA,pls i would be happy if anyone does this for me.My mail addy is [email protected].
Hi,
I have just purchased a web browsing bolt on for my O2 pay and go account. When I tried to get settings from O2 I was told by them that they have no settings for HTC mobiles - in fact that they didn't support any HTC models. Is this true or are any of you using 02 P&G to access web and email on the Diamond?
Any help would be much appreciated.
Thanks,
Richard
Its true! I cannot receive and send MMS and there is no GPRS conection.
O2 suxx! I'm going to change the operator.
Tesco Mobile do not have any problems with HTC
I am running my Diamond fine with GPRS etc on O2.
Also there are several O2 bundle deals for Diamonds at Expansys (http://www.expansys.com/nc.aspx?i=163250#o2).
When I set up my Diamond it offered an auto-configure settings after first booting which included O2 even though I bought this as standalone sim and contract free from play.com.
ACtually - not sure it will work with Pay & Go - didn't see that bit.
O2 connection settings are here BTW:
http://www.filesaveas.com/gprs.html
I am with o2 on simplicity, I also have the internet bolt on, didnt have to confirgure anything, it downloaded my settings (auto config) and havent had to do a thing. Upgraded firmware to Elite 3 and exactly the same. GPRS EDGE HSDPA all work fine and dandy. I'm in the uk and loving the combination.
Is there any way to run the auto-configure again without a hard reset?
Thanks,
Richard
ziggyred said:
I am running my Diamond fine with GPRS etc on O2.
Also there are several O2 bundle deals for Diamonds at Expansys (http://www.expansys.com/nc.aspx?i=163250#o2).
When I set up my Diamond it offered an auto-configure settings after first booting which included O2 even though I bought this as standalone sim and contract free from play.com.
Click to expand...
Click to collapse
They "don't support" HTC because they sell them under XDA name And o2 in Germany already got XDA Diamond.
Sorry to bump this, just got a Diamond, Im on o2 PAYG (UK)
Tried loads of the settings being banded about online.....
I can access o2's website on the Diamond but nothing else.
Im seriously considering changing provider, but.... I have £75 credit and its been my number for years, I like the extras I get with o2 (texts, rewards etc.)
Has anyone on UK o2 PAYG got it working?
Regards
After weeks of messing I managed to get a friends PDA working on O2 UK PAYG GPRS full internet not just O2 crap its all in the proxy setting i will get them off him and post later.
Tim
There is a way to fool the server into connecting to the web via the WAP APN. Possibly O2 have 'fixed' the workaround, possibly not. It may be worth a try! Be aware that this was published for a previous version of WM, but the settings ought to be similar still:
To setup the XDA on PAYG for internet:
Go to Settings, click on the Connections tab & click on "Connections"
In the first dropdown, "When needed, automatically connect to The Internet using these settings:" select "New..." and give the connection a name (Mine's O2 Wap)
On the "Modem" tab, click on "New..." to create a new modem specification. Give the specification a name (Mine's O2 PAYG GPRS). For the Modem selection, use Cellular Line (GPRS) and set the Baud Rate to 57600 and click on Next.
For the Access point name, use payandgo.o2.co.uk and click Finish
Next, click on the Proxy Settings, and put a check in both the boxes & click Advanced.
Use the following server addresses & ports:
HTTP: 193.113.200.195 port 8080
WAP: 193.113.200.195 port 8080
SOCKS: 193.113.200.195 port 1080 (not sure if this works as I've never had to use it)
OK your way back out to the today screen and launch Internet Explorer
When launching any website for the first time, you'll be asked for a username, password and domain.
Username: payandgo
Password: password
Domain: <empty>
Cheers Tim, that'd be fantastic.
Johnston4111 - Ill give that a shot shortly - menues are pretty similar.
Johnston411 said:
There is a way to fool the server into connecting to the web via the WAP APN. Possibly O2 have 'fixed' the workaround, possibly not. It may be worth a try! Be aware that this was published for a previous version of WM, but the settings ought to be similar still:
To setup the XDA on PAYG for internet:
Go to Settings, click on the Connections tab & click on "Connections"
In the first dropdown, "When needed, automatically connect to The Internet using these settings:" select "New..." and give the connection a name (Mine's O2 Wap)
On the "Modem" tab, click on "New..." to create a new modem specification. Give the specification a name (Mine's O2 PAYG GPRS). For the Modem selection, use Cellular Line (GPRS) and set the Baud Rate to 57600 and click on Next.
For the Access point name, use payandgo.o2.co.uk and click Finish
Next, click on the Proxy Settings, and put a check in both the boxes & click Advanced.
Use the following server addresses & ports:
HTTP: 193.113.200.195 port 8080
WAP: 193.113.200.195 port 8080
SOCKS: 193.113.200.195 port 1080 (not sure if this works as I've never had to use it)
OK your way back out to the today screen and launch Internet Explorer
When launching any website for the first time, you'll be asked for a username, password and domain.
Username: payandgo
Password: password
Domain: <empty>
Click to expand...
Click to collapse
Looks like it worked, you can set the username and password in Proxy settings on the Diamond Menaing no need to enter it at first connection.
This will use my bolt on. correct?
BTW, THANKS!!!!
As far as i know it does.
If not you'll soon notice your credit evaporating.
OggyUK said:
This will use my bolt on. correct?
Click to expand...
Click to collapse
yep it just uses your bolt-on my mates been using these settings for 3 months now with no problems.
Tim
Yeah, bolt on.
Are you lot able to use Remote Desktop? I cant use Live services, Youtube or RD.
This close to taking a contract out with another provider that suport this phone
XDA Ignito is listed as a future handset on O2 UK intranet - all I can say.
So yes, we do support it.
I've got a Diamond and can use picture messages and the internet as well as Live Messenger and Youtube. I don't use RD but I presume it'll work.
I'm on a staff simplicity tariff with the unlimited web bolt on and it all works fine.
Care to share details? do you have different logins?
Youtube loads but videos dont play, I get a synchronisation failed error on Windows Live.
Connection name: mobile web
Modem: Celluar Line (GPRS, 3G)
Access point name: mobile.o2.co.uk
Username: O2web
Password: password
Those work for me, create a new connection in Connection settings. The auto setup tool did it all for me though.
That works for you as you are on a contract.
You won't get wlm etc... on the wap work around on pay as you go. Not sure about remote desktop but i guess it's all related to the proxy.
Remote desktop and messenger both use secure connections so how about trying entering 193.113.200.195 in the WAP Secure section in proxy and try it the following ports numbers 8080,9201,443.
Its only a guess but worth a try I think
Tim
Hey guys, I posted this in general as well. I couldn't find anything for the life of me on it so I apologize if it's in here but I searched for about an hour. I got MMS working with manila 2.5 for Tilt 2. Here is the post.
Hey guys, here it is. I was beat last night.
http://thewingster.com/mmsfixm25.aspx
First use that link and download the OTHER networks fix by Valkyrie/Ace10134.
This will create a SampleMMSC MMS server in addition to the ATT one. Once that is done, go to all messages in you text messaging, then menu, then options. Once in this menu, hit menu again and hit MMS server. Here is where you need to put your settings and I think where the issue on the other fix has been. ATT's send limit is 600KB while Manila 2.5 defaults to 1024kb.
Server name: Whatever the hell you want it to be.
IP address: wireless.cingular.com
Port number: 80
Server address: http://mmsc.cingular.com
Connect via: MEdia Net
Send limit: 600 KB
WAP version: WAP 2.0
Let me know how this works for you guys. Make sure you actually have the phone set to use the new MMS server too =)
If this does the trick for it some one cab it up for me please. I can't right now. Good luck guys. Let me know if this does the trick for you. I have sent many of MMS fine.
mms fix
Please post to links for users to try thanks.
For those who can't receive at&t mms:
I used the PR MMS MediaNet settings tool available on XDA
Go to Settings>Connections>Connections
Delete all data connections before running the tool
Use the device Network Setup Tool to make your primary connection.
Run the PR MediaNet MMS tool to set the size limites
After setting up the connection create a new connection in com manager
Use Work Connection
Use these settings
Connection Cellular GRPS 3G
Name I used MediaNet No Proxy
APN wap.cingular
Username [email protected]
Passwork CINGULAR1
Do not use the proxy settings for this
Have all internet applications go to this connection do that in your com manager
Go into your mms options in messaging click servers click at&t mms make sure MediaNet is still the connection for send/receive mms
now it will send receive mms using the at&t proxy and the internet for other apps without the proxy