Database Develop

Not completly bricked

Hi guys im wondering if any of you can help me out here.
I have been on cyanogen (latest) for a while but decided to have a go at puting the ''donut'' rom in the android development bit of this forum (eu version as im in uk) on my phone this evening.
I flashed the base version fine and it started up great. Then I flashed the extention (add on) part and it started up but after the ''android'' screen it just went black and nothing happend. So i did a hard reset and tried again, same problem occured.
I then tried to put the latest cyanogen rom back on my phone, put to root, started it up then BAM stuck on g1 screen. Didnt get passed it. So put other roms later cyan roms on and still same problem occurs.
I then freeked out and tried to go back to RC29, so i deleted everything of my sdcard and put the dreming file on, pressed power and camera button and then BAM it comes up with some sort of cyanogen screen and not the rainbow screen. So havent got a clue how to install the dreming file. So gave up there
So this is where im at. Nothing on my sd card. Still got cyan on my phone but cant get it started up, no matter what rom I try it keeps getting stuck on g1 screen.
I know this is completly retarded but I really need help to get this sorted.
ANY HELP WOULD BE GREAT
Thanks

Have you been wipping?

Wiped before flashing donut rom...And when trying to put cyanogen rom back on...

If you can boot into recovery or into fastboot then you should be fine.
Wipe, if you use appps2sd the wipe your ext partition as well.
Flash base defanged rom from Cyan's site and flash Cyan's latest (Check md5 sums of both to make sure that your downloads are not corrupted. Fix permissions and you should be ok. If you still can't boot up (and it will take a while to boot up after a wipe) then you can go back to RC29. Just make sure that your nbh file is named exactly Dreaimg.nbh and your card is formated to FAT32, otherwise fastboot will not find it.
Good luck.

borodin1 said:
If you can boot into recovery or into fastboot then you should be fine.
Wipe, if you use appps2sd the wipe your ext partition as well.
Flash base defanged rom from Cyan's site and flash Cyan's latest (Check md5 sums of both to make sure that your downloads are not corrupted. Fix permissions and you should be ok. If you still can't boot up (and it will take a while to boot up after a wipe) then you can go back to RC29. Just make sure that your nbh file is named exactly Dreaimg.nbh and your card is formated to FAT32, otherwise fastboot will not find it.
Good luck.
Click to expand...
Click to collapse
Wow lots of help there thanks.
Firstly tho I cant find this ''base defanged rom'' from cyans website? Can you give me a pointer as to where it is? Is that its name on the website or is that it in short?

Forget that I found ''DRC83_base_defanged.zip''. Downloading it now.

Flashed myself into a corner...

So I was running OpenEclair v1.1.1, and since putting eclair on it, I've been unable to flash to any other rom. It goes through the wipe/install process, but when the device reboots I just get the rogers screen forever. I can then go back into recovery and re-flash OpenEclair to get it working again. I just got through all that hassle with rogers and made it out with my data and my root, so I was now attempting to fix this issue, and figured it couldn't hurt to upgrade my radio and try out amon ra's 1.5.2R image.
Unfortunately, I downgraded the SPL to 1.33.0009 right after trying to flash another ROM which didn't work, and performed the downgrade before I put a working ROM back on it (to use flashrec to get to amenra's), so at present I can only get into the SPL. My cyanogen1.4 recovery seems to be gone as I just get the original triangle ! logo (no menu or anything) when trying to start up in recovery mode.
Now what did I do, and how far back do I need to dig through tutorials to get back to a working rooted ROM? I'm not really sure what point I'm actually at, whether I still have root or not, or where to start.

Ninzoku said:
So I was running OpenEclair v1.1.1, and since putting eclair on it, I've been unable to flash to any other rom. It goes through the wipe/install process, but when the device reboots I just get the rogers screen forever. I can then go back into recovery and re-flash OpenEclair to get it working again. I just got through all that hassle with rogers and made it out with my data and my root, so I was now attempting to fix this issue, and figured it couldn't hurt to upgrade my radio and try out amon ra's 1.5.2R image.
Unfortunately, I downgraded the SPL to 1.33.0009 right after trying to flash another ROM which didn't work, and performed the downgrade before I put a working ROM back on it (to use flashrec to get to amenra's), so at present I can only get into the SPL. My cyanogen1.4 recovery seems to be gone as I just get the original triangle ! logo (no menu or anything) when trying to start up in recovery mode.
Now what did I do, and how far back do I need to dig through tutorials to get back to a working rooted ROM? I'm not really sure what point I'm actually at, whether I still have root or not, or where to start.
Click to expand...
Click to collapse
Have you got a fastboot mode you can boot into? At least then you could fastboot boot a (non-peristent) recovery image to let you then restore from a nandroid backup...assuming you have some good backups either on the phone or on a PC that can be copied to the phone.
I should note you haven't said what kind of phone you have (G1 or Magic) or really provided anything resembling a complete set of relevant information about your phone and its current state. So it's hard to help.....even if this was the right forum...and it isn't.

Try formatting or using a new memory card.

I'm using a rogers Dream, I have a 2gb SD card with 32MB linux swap and 500MB ext3
HAD 1.33.2005 SPL, 1.4 cyanogen recovery image.
Now I have 1.33.0090, can't get into recovery.
Trying to boot normally brings me to a rogers screen.
I CAN get into fastboot, can I put cyanogen's recovery back on?
Sorry if this is the wrong forum, where should I have posted?
Also, I don't know what information IS relevant to this, so please bear with my noobness.
Is there a recovery that will let me flash a ROM without changing the SPL back to 2005? Apparently if I can get the phone to boot up I should be able to use flashrec to upgrade the radio and SPL from the point I'm currently at.

Moved as not Android Development.

So I'm not sure what I did but the phone boots now...

Holy sh** it wasn't just me. I have this SAME problem. After flashing eclair and wiping and flashing another ROM it just stays at my splashscreen FOREVER. Even broke my nandroid, so I can't restore. How I fix mine everytime: Flash a rom OVER open eclair boot up... you'll probably get a sht load of force closes and all that but once you ge tto login screen just reboot into recovery and wipe and flash or nandroid restore then it should work.

If you guys are rogers, then you will most likely be ebi1, in which case, dont forget that you must also flash an ebi1 kernal to get past the boot screen.

So the phone booted into the original 1.5, I didnt realize the downgrade of my SPL flashed the ROM too. I put flashrec on and flashed Amen Ra's new recovery image and the rogers radio update, this is what I'm at now.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA21000)
CPLD-4
Radio-3.22.26.17
Trying to flash to a custom rom again still fails. I've tried cyanogenmod, super D, and openEclair, it doesn't seem to matter. Where can I get an ebi1 kernel to flash?
E: looking at your signature, it seems I've got the right radio, I'll try using that port tool.

That did the trick! I followed the steps in your signature, flashed a rom, then flashed the ebi1 kernel and my phone booted like a dream. Pun intended.
Edit: So I'm back to only being able to run openeclair. Flashing cyanogen and then briancrook's ebi1 kernel still only gives me the rogers screen. I am however able to flash back to openEclair to get access to a working device again.
Edit: openEclair is running like garbage, it keeps completely locking up the device, I haven't even been able to log into my gmail account to get my contacts back.

Okay, I've managed to get the rom running smoothly by wiping everything, flashing the non-ramhack version of openEclair 1.2.2, then flashing the 1.2.2 ebi1 kernel. Unfortunately for some reason when I do get into eclair, I have no phone app, no settings, and no contacts app, even tho the contacts still work if i try to message someone. This is infuriating.

G1 problems during first time root.......help

Ok, let me start off by saying my phone is currently not bricked. I can get into recovery(H+P) or fastboot(C+P) just fine. My problem lies with the last step of rooting when I flash the new ROM. I am currently trying to flash v4.2.15.1 which is apparently the latest Cyanogen Mod.
Now I've tried two different methods and both won't boot after the ROM is flashed.
The first method is "method B" seen over at the AndroidAndMe website. This method works fine and I can get back into the phone all the way to the point of flashing the SPL and then the ROM. It installs fine, but after reboot it gets stuck on the G1 startup screen.
The second method is the wiki guide for updating from original OS to Cyanogen. This one is a bit different using the Android 1.6 base image. The installation on this method goes smooth up untill the last reboot after flashing the ROM just as the other method. The difference here is instead of it hanging at the G1 startup screen, it get's just past that to a blank backlit screen. No images, no android logo, no sound, no nothing.
Like I said before, I can still access recovery and fastboot which seams to be my only way out. I have repeated this process multiple times on both methods with the exact same results. Fastboot keeps bringing me back to the Android 1.0 firmware(RC29) which is atleast giving me access to a phone while I try to figure this out.
Suggestions? Ideas? I really need to get this phone working again.
I am always on AIM "DeathstarsOG" if that is more convienient for those offering up some help.

What steps did you take to flash the rom?
Did you read the steps outlined in his wiki? The most important step is to flash DRC83_base_defanged.zip first, then his rom over the top.

dbl post sorry.

evilkorn said:
What steps did you take to flash the rom?
Did you read the steps outlined in his wiki? The most important step is to flash DRC83_base_defanged.zip first, then his rom over the top.
Click to expand...
Click to collapse
I followed the steps on both writeups exactly how they were written. As far as the wiki one, I already had a few of the files needed from trying the Androidandme method. Also, my phone is basically already downgraded to the RC29 so thats another step i can skip. All needed files are already on my SD card and were installed in the following fashion:
DREAIMG.nbh
cm-recover-1.4.img
DRC83_base_defanged.zip
update-cm-4.2.15.1-signed.zip
ota-radio-2_22_19_26I.zip
My SD card is already formatted to FAT32
I set up the telnet to get access to recovery mode, wipe phone, then install DRC83, then the cm-4.2.15.1 and lastly the radio. I do a Home+Back reset after installing the radio and it goes past the G1 Startup screen, to a black lit screen of nothingness.
If you're looking at the wiki guide named: "Full Update Guide - G1/Dream Firmware to CyanogenMod" you'll see I basically am supposed to be seeing a update screen that loos like a open box with an arrow pointed down toward a phone after I do this reboot. Well, that doesn't happen. It just goes to that black screen.
Now I'm not a whiz when it comes to stuff like this however I can figure things out fairly sufficiently for the most part. But this has got me stumped. It sounds like I may have a corrupted version of Cyanogen as everything else I have been able to install and actually run on the phone(besides the DRC83). Or maybe I need to flash the radio before the DRC83? I haven't even gotten to the SPL, and after all this I may not want to.
I've done this process over and over atleast 8 times and I feel like I basically know every step by heart, but I still don't want to just guess at what it could be and risk a brick. So that's why I'm here. What do you guys think could be the issue?

Do not wipe the phone after istalling RC29. nbh file rewrites everything, and I mean it... everything.
Here's your order:
DREAIMG.nbh
Boot, sign-in, obtain root (telnet, connect to local host, you know the shpill).
Flash recovery (use ra 1.6.2, it's more updated then cm 1.4)
Wipe
Flash DRC83 defanged.zip
Flash ota radio, follow directions on the screen, you will need to reboot at least once
Flash 1.6 rom (cyan's is a good one to start at least)
Fix permissions.
Wipe
Reboot
Do not set-up linux swap or apps2sd at this time, it will complicate the process more then needs to at this point, you can do it all later.
Good luck.

borodin1 said:
Do not wipe the phone after istalling RC29. nbh file rewrites everything, and I mean it... everything.
Here's your order:
DREAIMG.nbh
Boot, sign-in, obtain root (telnet, connect to local host, you know the shpill).
Flash recovery (use ra 1.6.2, it's more updated then cm 1.4)
Wipe
Flash DRC83 defanged.zip
Flash ota radio, follow directions on the screen, you will need to reboot at least once
Flash 1.6 rom (cyan's is a good one to start at least)
Fix permissions.
Wipe
Reboot
Do not set-up linux swap or apps2sd at this time, it will complicate the process more then needs to at this point, you can do it all later.
Good luck.
Click to expand...
Click to collapse
You my friend are a genius!
Maybe the write-ups for rooting should be re-written to follow this as it worked flawlessly.
I started all the way back from step one at the default G1 1.6 Firmware.
Downgraded to the RC29.
DL'd telnet from the market.
Installed the new RA-recovery
Wiped.
Flashed DRC83.
Flashed Radio.(promted me to reboot)
Flashed the ROM.
Fixed Permissions.
Wiped again.
Then reboot.
Process went flawless, no hicups or anything. Thank you very much sir!

I screwed something up.

I was rooted and running CM6. I tried getting back to a stock 2.2 by flashing the stock image from Rom Manager. I downloaded the 2.2 update from google and it wouldn't update. In the system menu or bootloader I got a little format happy with boot/system and so on. Anyway, doing a nandroid now. Is there anyway to get this phone back to the kernel it shipped with?

You have to flash it with the stock recovery.

I've been using that Universal androot.http://www.androidappjudge.com/2010/08/one-click-root-application-universal_10.html I tried flashing stock 2.2 and I didn't read the two options, I just clicked them and kept going not realizing that I flashed the rooted, superuser version. Does this mean that I'm now rooted forever? When I try flashing stock 2.2 with rom manager It stops @ the android and /!\ symbol. Now it's even doing this with CM.
I'm now wondering how to get rid of whatever crap might be floating around on my phone and why it may not be flashing anymore?

there is nothing wrong, rooting allows you the ability to have super administrative rights. Since all you have done is grant yourself admin rights, the recovery should be the same.

Something is wrong. I can't Fix Permissions or flash anything.
Man, I should have just left it alone.

glwinkler said:
Something is wrong. I can't Fix Permissions or flash anything.
Man, I should have just left it alone.
Click to expand...
Click to collapse
Did you wipe? I used 1-click root and I hadn't flashed anything in over a year so I forgot to wipe and I boot looped until I pulled the battery, booted into recovery and wiped. Simple solution but it could be worth mentioning...

So you are saying that, you have the stock recovery now? Triangle with little android? If so, Just download a PASSIMG.zip and flash through bootloader. This will take you to stock.
I have an N1 with locked bootloader and when I wanted to go back to stock(Forgot to get a nandroid of unroot rom). I had to flash a stock recovery. then downloaded the PASSIMG.zip from here http://forum.xda-developers.com/showthread.php?t=717870&highlight=frf91+downgrade
This takes me back to ERE76. Then I download an OTA of FRF85B.

I think fix permissions fixed everything. Thanks for the tips!
THIS HELPED TOO:
http://forum.xda-developers.com/showthread.php?t=619153

Back to stock stuck on AT&T logo

I decided to root my phone and try some ROMS last night on my Captivate. Love it by the way except one problem that I can not seem to figure out.
Before I did any flash I used ROM Manager to take 2 backups of my stock ROM and also used Titanium to backup all user apps and data.
Everytime I try to go back to stock and the phone reboots after recovery mode I get the AT&T logo and it never goes anywhere.
How do I get back to stock?
THANK!

If you are trying to restore stock through nancroid backup that won't work. You need to use odin.
What build is your phone? You can find it under your battery, something between 1006-1012

It is 1012. I thought you could just restore from those backups to get back to stock.
I have never used odin before. How do I go about that?
Thanks!

I can not find a good download for Odin. Could somebody provide please?
Thanks!

With your build you need to be careful what odin you use
You wavy to follow this
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Clockwork does not restore kernel and modem. You are stuck at at&t screen because your system is ext 4 used on roms, and your nandroid is rfs. Long and short it won't work

So.... I am a bit confused now. Is there even a way to get back to stock at this point?

The link I posted
Your stock is jh7, odin One click is jf6. The procedure laid out in the link will get you back to jh7, although it takes a couple steps.
As long as you can get into recovery you can probably reflash any rom you have on your sd

Yikes thats a tall order to get back. Thought it would be more simple. So it is easy getting to a point to flash ROMS... Not so easy going back.

I'm also stuck in the same vicious cycle as we type.
I got 2 different stock rom backups and a cognition backup and can't get nothing to restore factory. I got premium ROM Manager. I can get into 2 different recovery screens. 1 from the Clockwork v2.5.1.3-voodoo lagfix and 1 using the update.zip on my root. Can't restore anything that gets me past the ATT logo.

ChokeD said:
I'm also stuck in the same vicious cycle as we type.
I got 2 different stock rom backups and a cognition backup and can't get nothing to restore factory. I got premium ROM Manager. I can get into 2 different recovery screens. 1 from the Clockwork v2.5.1.3-voodoo lagfix and 1 using the update.zip on my root. Can't restore anything that gets me past the ATT logo.
Click to expand...
Click to collapse
What is your build number, under battery
Between 1006-1012

I don't see a 1006-1012 anything. Where exactly would it be listed under the battery ??? ON the battery ? my phone is 3 days old.
EDIT: oh I think its a 1010 ...I think I found it
Thanks for the help by the way.

Link listed earlier in thread

Yeah it is the same for me.... Sucks!
And I can not download any of the files in that link because I am at work and those hosting sites are blocked for us. :-(

larryroberts said:
Yeah it is the same for me.... Sucks!
And I can not download any of the files in that link because I am at work and those hosting sites are blocked for us. :-(
Click to expand...
Click to collapse
Have you tried this
Phone off
Hold volume up and down and power
Let go when at&t comes up
Should be green recovery
Select install zip from sd
Choose zip
Select rom file that is saved on your sd, any you may of tried
Confirm
If your lucky maybe you can flash the rom

Uhh ??? Somehow from the recovery mode I just re-installed Cognition 3.04 back on my phone by browsing to the ROM.zip an installing it. I have to charge my phone for a few but I'll definitely come back and tell how I did it after a while. I think it was by browsing to cognitionv3.zip from 1 of the recovery menus insead of going to the update.zip. That beats the hell out of going through all the steps of going back to stock.
Thanks for the help.
EDIT:
Yeah somewhat like above post, only I had the Cognition (red) recovery menu and I went to install .zip and browsed to the cognitionv3.zip on my sd and installed it. *BLAM* back to Cognitionv3.04 I'll work with that till I got more time to mess with the other.

mcord11758 said:
Have you tried this
Phone off
Hold volume up and down and power
Let go when at&t comes up
Should be green recovery
Select install zip from sd
Choose zip
Select rom file that is saved on your sd, any you may of tried
Confirm
If your lucky maybe you can flash the rom
Click to expand...
Click to collapse
Yep I have tried that. Or at least I guess....
I go into the recovery screen but the problem is the only zip files I have are my custom ROMS. I did a complete backup with ROM Manager of the stock ROM before flashing however it did not create a zip file, it created a folder which contains everything that was backed up. I have tried to restore from that but when I do and the phone restarts it sticks on the AT&T white logo screen.

I am not saying restore stock, I am saying flash a rom. it may get you a working phone

Oh yeah I have done that just fine. I am using Cognition.
I am just trying to find my path back to stock.

mcord11758 said:
I am not saying restore stock, I am saying flash a rom. it may get you a working phone
Click to expand...
Click to collapse
Exactly, If you flashed a ROM on the phone the ROM is still there. Just use the recovery mode and choose "install a zip from sd" then go to "choose a zip from sd" then it will let you browse the sd for the .zip(rom) you just had. (not stock). It should be successful. Worked for me.
At least you will have a working phone and you can then look into going stock once you've read up a little more on it.
Just trying to help.
EDIT: oh, OK, I myself was in a panic and had just found that possible.

No problem. Thank you for the help!
I was thinking that when I did the backup with ROM Manager that it was creating a ROM version of the stock so I could flash back. Guess not though.