Database Develop

wiki,help me!radio updater error

thank all guys in this great forum firstly as a new blueangel boy!
i get the o2 ce rom(1.31.00) and ext rom(1.31.139) from http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
and update them successful.
but when i want to update radio rom(1.06.02),there are some error mark as "radio bootloader verion error" "pls contact HTC..." in my pc screen.
my pda marked as "USB" on the top of pda screen and "v2.02a" at the bottom before i start updating.and now, it is stoping at update radio rom.
my radio verion is 0.33. what should i do?why some guys' bootloader verion is "v2.06"?
thanks for all reply

Sorry that nobody has got back to you.
The way i read your info is that you did a 1.31 o2 upgrade with no problem, the replaced the radio and ran the upgrage again, which failed and you are stuck in boot loader.
The 1.31 rom is a type II encription rom, the radio is a Type I. Thus the exe files to do the upgrade are not the same which leads to a dead device.
Rerun the 1.31 upgrade.
go to wiki and get the 1.10 radio and its upgrade files, run that.

Help!!! Having problems with rom updates? Cannot get past the second screen

Hi!
Got som issues!!
Updated my Qtek 9100 with IPL/SPL 3.08 - Worked fine!
Updated my OS with Core 2.0 - Seemed to work fine
As far as I know my device is CID-unlocked!
Restarted my phone!
Now my phone can't load the OS, was stucked in second splashscreen that shows the specs
IPL 3.08
SPL 3.08
GSM 02.69.11
OS 10.2.0.8
Entered the bootloader!
Disabled antivirus
Then Following steps has been taken:
Flash with the original rom "RUU Prodigy 21771 2177103 026111 QTEK SVE SVE Ship"-package (eg tool 2.5.2.0 Swe)
Result: "ERROR[296]: Upgrade Only
Flash the original ROM and with the ROMUpdateUtility (2.0.1.0) English
Result: ERROR[300]: Invalid Update Tool
Flash the original ROM and with the ROMUpdateUtility (2.5.2.0) English
Result: ERROR[296]: Upgrade Only
Flash the Core 2.0 ROM with the ROMUpdateUtility (2.0.1.0) English
Result: ERROR[300]: Invalid Update Tool
Flash the Core 2.0 ROM with the ROMUpdateUtility (2.5.2.0) Swedish
Result: ERROR[238]: Cannot read file
Flash the Core 2.0n ROM with the ROMUpdateUtility (2.5.2.0) English
Result: ERROR[238]: File Read
Flash the WM6 Busines Edition ROM with the ROMUpdateUtility (2.0.1.0) En
Result: Flashing 100% Success
Still hangs in second screen after boot!
Flash the original ROM with the ROMUpdateUtility packaged with the WM6BE (eg 2.0.1.0 en)
Result: Flashing 100% Success
Still hangs in second screen after boot!
Still with the same specs as described in the beginning!
The flashing went OK but nothing has changed, why????
Even tried a Hard Reset and reflashing again with the opriginal rom, no changes!
------------------------------------------------------------------------
Why? Dunno!
Can anyone give me a hint what to do??!!
Is there a IPL/SPL 2.xx to reflash my phone with?
Is this needed to be done before proceeding?
What else can I do, except get it to my dealer for repair?
/Mike

mostberg said:
As far as I know my device is CID-unlocked!
Click to expand...
Click to collapse
that doesn't sound like a very certain assertion?
-------------------------------------------------------------------------
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
-------------------------------------------------------------------------
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
-------------------------------------------------------------------------
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
all of which strongly imply that your are not cid unlocked

Charmer stuck in bootscreen.

Hi,
My charmer is stuck at the bootscreen after trying to flash the charmer_touch rom. First I did a cid unlock and then the update. It finished without errors.
Then I flashed the official AKU3 update from tmobile (because the charmer is tmobile germany branded). Flashed without problems (in bootloader mode) but then the same problem! Even with the AKU 2.x update.
When trying to hardreset I only get "format error".
What can I do?
Thanks in advance.

Read this:
http://forum.xda-developers.com/showpost.php?p=1340773&postcount=32

Hi,
Thanks, this looks great. But I can't find a no-id ruu.

So... where can I find it?

Here:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip

Yeah, thanks. How can I integrate it in the RUU package? Because when I unpack the update and start it from somewhere of my HDD it won't work! Where is the standard directory to run it from?

Any idea?

you should place it in the same folder where the contents of the RUU were unpacked
rgs

The problem is, that I cant see/decide where the RUU is unpacking itself. When it unpacks and waits for my input, I tryed searching for the files that were unpacked, but no luck! Strange.

So, nevermind the previous problem with paths... figured it out (path was too long)
My new problem:
Updated with the no-id ruu but still format error what now?
Worked fine with prophet rom. CLOSED.

Megabug said:
So, nevermind the previous problem with paths... figured it out (path was too long)
My new problem:
Updated with the no-id ruu but still format error what now?
Worked fine with prophet rom. CLOSED.
Click to expand...
Click to collapse
can you tell me the rom you take to fix it
have the same problem Format failed and stop @ boot screen

http://www.tm-phonedownloads.com/download_manager_mda_com2.html
try this one and tell me

after 1 % i get an nbf file error
i have
ipl 3.08
spl 3.08.0000
gsm 02.69.21
os 3.8.2.22
after hard reset i get format failed
what can i do??

i fix it
i get unlock code from imei-check
then CID unlock
and then i make sd card backup with MTTY_updateROM.exe
after next start it copy all back to the mda and now its all ok
and now format works

Charmer Stuck At Splash Screen
vlodeck said:
Here:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Click to expand...
Click to collapse
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
ACTIVE SYNC NOT CONNECTED WITH MY MDA C2

Can't flash Radio 1.14.25.24

I'm having problem when flashing Blackstone Radio 1.14.25.24 onto my Diamond Touch.
My phone has been security unlocked as shown in Bootloader with HardSPL 1.40. I already installed the rilphone 1.14.25.24 cab.
I used the Blackstone update utility which gives me an error when flashing the radio saying that the update utility version is not correct.
So I switched to use the Diamond update utility, but it gave me another error saying that "Invalid model id".
Please help anyone. Thank you so much.

[Q] HD7 - [Error 294] INVALID VENDER ID (for all signed roms)

Dear friends,
2 days ago, i tried my hd7 to update official Mango (posted from football) from NoDo. But update is not complated and my phone is still stay in Bootloader Screen. Everythings looking fine in Bootloader screen :
RED:
PD29100 SS-BC (4K)
SPL-4.5.2250.0 (129185) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
GREEN:
SD SANDISK 15193MB
Partition Info-v211v413
BLUE:
Empty
WHITE:
Serial - USB (After plug cable)
But, when I try flash a ROM, Update Utility saying : Error 264: Invalid Vendor ID and my phone is going back to Bootloader Screen.
Before Update:
My device is not haved RSPL/HSPL.
Working with official stock rom (updated to 7403 via Zune)
Not installed Chevron Unlock
I tried to flash all official stock ROM :
RUU Schubert HTC Europa 1.16.401.01
RUU Schubert HTC Europa 1.69.401.01
RUU Schubert S HTC 4.05.401.02
After tried many ways and methods, I was angry and i tried RSPL/HSPL to Mango SPL (4.XXX) but RSPL/HSPL not worked on my phone (Error: USB Device Not Detected)
Now:
Bootloader Screen looking fine.
I tried to flash all official ROMs from HTC.
Never Installed HSPL/RSPL to phone
I installed official rom before via Rom Update Utility, but phone haved SPL 3.XXX
My phone is stiil wait in boot screen. Not openning OSX.
My Phone is HD 7 Unbranded - Sim Free
any solutions?
(Im so sorry for my bad English)
Thanks...

Are you completely sure you have an Europe HD7?
Did you ever flash an original rom before?

actually im not sure my friend. but i was upload a europan flash to my phone before (RUU_7403).im trying asian now.

I hope for you that asian roms will work.
The only solution I which can work if other original roms also fail is to get the eqipment to flash via gold card methode.
But I hope asian roms will work

thank you sadman but i tried 2 asian roms but not worked. i cant believe this. Resuming error 294 Invalid Vender ID...

So lets say you really have an european HD7
When you flash an old rom (Standard or NoDo) did the flashing tool try to flash or does it fail imidietly?
If you flash old rom's the phone is rebooting after flashing spl & than continues flashing the rest.
maybe by trying older roms, spl is flashed but the os fails like the Mango spl which you mentioned in the first post.
If the bootloader doesn't show the spl version 4.xx you have the chance to try RSPL/HSPL and flash a good/old rom

yes bro, i have european HD 7. after the trying Mango update, SPL is changed to 4.5 from 3.1 and probem started with Mango Update. i need to change SPL, i know, but RSPL/HSPL is not working with this SPL. Phone driver is "Qualdcomm CDMA Technologies MSM" in bootloader mode and showing under Mobile Devices -> HTC Sync in Device Manager.
Edit:
Dear friends. Problem is solved !? i was try RSPL to SPL 4.5 (very dangerous), tool is say a error "not complated". And now, stock rom is openned automatically? i dont understand anything.But phone is half bricked.Now, not showing anything in Bootloader screen.Red-Green-Blue and White is empty.

redzippo said:
yes bro, i have european HD 7. after the trying Mango update, SPL is changed to 4.5 from 3.1 and probem started with Mango Update. i need to change SPL, i know, but RSPL/HSPL is not working with this SPL. Phone driver is "Qualdcomm CDMA Technologies MSM" in bootloader mode and showing under Mobile Devices -> HTC Sync in Device Manager.
Edit:
Dear friends. Problem is solved !? i was try RSPL to SPL 4.5 (very dangerous), tool is say a error "not complated". And now, stock rom is openned automatically? i dont understand anything.But phone is half bricked.Now, not showing anything in Bootloader screen.Red-Green-Blue and White is empty.
Click to expand...
Click to collapse
it says not completed, have u tried flashin a stock rom??

Magpir said:
it says not completed, have u tried flashin a stock rom??
Click to expand...
Click to collapse
i believe, you try to hard to help, magpir.
this thread is two months old, besides...
as redzippo said, (s)he has a half-bricked device.
in which case, flashing a Shipped ROM will not solve this issue.

hell i have the same problem! anyone have the solution??i tried like 10 different roms and none worked...if i try to flash with RUU wrapper in one case i get to 1% flash,and in other 3% flash and then the error invalid vender id...