Database Develop

Xperia problem with booting up

Hi ,i have put ruusigned_072stockspl ( i rename it to kovsimg.nhb ) image into my card and bot it up , but it says loadin ..... all the time , and i have bean waiting about 4 hours
what shall i do to make these work

did it flash? i hope not because if it did flash you will be most likely hanging in bootloader ALL the time you start your phone.
flash your stock spl only with RUU over windows...
if that is the case search for mTTy and the required instructions.
they can be found in the hard spl thread.
it was something with 'set 14' and 'set 16'.
regards

yes i'm stucked in botloader every time when i turn on the phone , and mtty doesn't work , it says : USB port cant open

Try to flash a stock rom

i used mtty tool and i fixed boot up screen , it s ok now
thanks guys

omg , it looks like i havent fix the problem complitely , i just managed to turn the phone on without going automaticli into bootloader , and now it doesn't want to flash custom rom , it stuck's into white sreen with loading on it

That could be because you messed up the spl. Try to reinstall the hard-spl. If you manage to do that your problem should be solved

Finaly i made it work after doing hard spl just as recomended , at first it didn't want to do a hard spl but after 1 hour i managed to make it work , and than i flashed custom rom and now it works great
Thank's guys for your help!!

Urgent Help needed (think brick the phone)

My friend is having G1. He install Custom ROM ( Cyanogen Mod ROM V.05) without access Root .. and now His phone won't start .. is there any solution ? He didnt know He have to root it ..
tried everything unplugging battery... and also didnt do nandroid backup or anything .. any Help ?
On screen it shows update but whenever trying to update it its fails & says update terminate ..
screen shows :-
dreaimg.nbh - Fail
Radio_v2 -
bootloader -
recovery -
boot -
splash1 -
system -
userdata -
Update terminate
update fail

put the DREAIMG.nbh on the root of the card and load it.

Thanks bro but ... went 2 a shop today , and he installed ROM paid 30 bucks .. but got another problem .. today was trying 2 install CaNNoN202 Complete Eclair (v2.2.1) ... 1st i root his Phone - then i back up everything using nandroid back up - then i install danger spl and Custom ROM Later i wipe/factory reset and installed Danger spl and CUstom ROM .. it was taking so long time .. all most 35 Minutes so i removed the battery and later i just nothing no menu options nothing at all .. tried everythin menu + power button every buttons but just d screen and says G1 T Mobile thats it .. cant do nandroid back up or anything ? Please tell me ... Thanks

maheshpatel said:
Thanks bro but ... went 2 a shop today , and he installed ROM paid 30 bucks .. but got another problem .. today was trying 2 install CaNNoN202 Complete Eclair (v2.2.1) ... 1st i root his Phone - then i back up everything using nandroid back up - then i install danger spl and Custom ROM Later i wipe/factory reset and installed Danger spl and CUstom ROM .. it was taking so long time .. all most 35 Minutes so i removed the battery and later i just nothing no menu options nothing at all .. tried everythin menu + power button every buttons but just d screen and says G1 T Mobile thats it .. cant do nandroid back up or anything ? Please tell me ... Thanks
Click to expand...
Click to collapse
See my avatar for full details of the situation you are now in.
DangerSPL should always be installed through fastboot, not recovery.

Any Help bro ? i know but **** just happened .. & i dont know difference between fastboot & recovery ...

maheshpatel said:
Any Help bro ? i know but **** just happened .. & i dont know difference between fastboot & recovery ...
Click to expand...
Click to collapse
There's nothing you can do now except attempt a JTAG repair.. Instructions are here if you feel up to it:
http://forum.xda-developers.com/showthread.php?t=591048

[Q] Can't unbrick my P970

I bricked my Phone ( again ) and tried to reset it with this Method ( http://forum.xda-developers.com/showthread.php?t=1275315 )
When I repaired my Phone the first Time with this method it worked perfectly.
But Now it wont work - it Displays ( on the Phone )
http://imageshack.us/photo/my-images/256/file0046e.jpg/
In english it means
Firmware Update
Firmware updating
After updating the Phone will be restarded
and after a short while this
http://imageshack.us/photo/my-images/197/file0048l.jpg/
After trying 3 Times again with different Firmwares ( v10a , v10c , v10f ) I tried the Emergency Reset in the LG Mobile Update Tool - it Displays the same...
What can I do now?
Additional Data:
Rooted ( Ginger Break )
Modded ( CM7 )
Broke after Restoring a previous Backup with Clockworkmod 5

Flash V20a : http://forum.xda-developers.com/showthread.php?t=1310093
Then do a emergency recovery with LG Update tool

Thank you very much worked!

Glad to hear that.

boot problem ...

hi guys ..
today i disable some tweaks on my phone ..then reboot ..
now in boot ( if i reboot my phone ) i got galaxy s1 screen then kernal logo screen ( right now every thing normal )
but the problem i got after that galaxy s1 screen + kernal logo screen Again :silly:
then my phone boot normaly
me sgs take long time in boot becuase this problem
CM10 - devil kernal
sorry for my ban english

You Must Install Stock ROM ( 3 Files ) and when you install 3 files ROM , Every things Should be Ok.

Bright Ruby said:
You Must Install Stock ROM ( 3 Files ) and when you install 3 files ROM , Every things Should be Ok.
Click to expand...
Click to collapse
is this only way
my phone work good the problem only in boot but after that it work fine
any other way ..

abduallah77 said:
is this only way
my phone work good the problem only in boot but after that it work fine
any other way ..
Click to expand...
Click to collapse
I think it's Only way
Or you do nothing and See it again

wrong DPI + usb not recognizer

Hi , a friend gived to me his phone to install a custom ROM , i made that before with my SG sII , provlem is when i installed a CWM , DPI was changed (i guess i installed cwm from other phone ) and now all works fine but display is off , is working but is off , i can acces only Download mode , here , other problem "Usb not recognized" is plfrom phone cuz i tried with other usb , port or PC ! WHO can i reinstall firmware or solve this problem with usb or DPI ! PLEASE HELP ! In 1-2 days i need to give him phone back

I can't understand a thing what you wrote... Can you explain in detail, may be step by step what all you installed and how...

nokiamodeln91 said:
I can't understand a thing what you mean up there... Can you explain in detail, may be step by step what all you installed and how...
Click to expand...
Click to collapse
I was to my friend to install on his N7000 a custom ROM , i moved to sd card cm11 gaps and Philz recovery . My mistake was , i used Philz from my Galaxy S2 and when i installed the recovery , i think the DPI was changed , and now when i want to install cm11 or do a wipe , it shows " Galaxy Note GT-N7000 and them the screen is complete black or with withe lone on screen like was broken , now , all i can acces is Download mode , but i dont know what problems has the phone cause what i try is saing "USB not recognized "
P.S : when i turn on phone normaly after logon boot , screen turns off but sound said to me cause is working , logon sound or when i recive a call or sms , but screen remains off
SORRY MY BAD ENGLISH but i am very disperate right now to write corectly ...
Edit : i posted on youtube : http://youtu.be/0rV2ZHSITNQ

So you installed the wrong kernel... Try to blindly flash correct philz kernel... Empty the sd card.. Then just place n7000 philz kernel and navigate blindly with the buttons to install.. May be take help from s2 philz recovery on your phone..