Related
So today i finally get the gusto mod my phone Android Dev 1. After downloading all the files and following the instructions here i can't get past the black g1 screen (#8). note i can also get the the rgb screen. thats it, but with so many different posts with similar issues, my brain is pounding. At this point if i can get beack to factory, ill live. what i'll hate is the fact that bricked my phone. i'll most likely get screamed on for not searching, but i think i may be searched out. any help would be appreciated.
thanks.
docfu.
first of all dont freak out lol. Download the dreaming.nbh or w/e file from the rooting instructions and place it at the root of the sdcard. Then get into the rgb screen (Camera + Power) and flash it. That should get you back to factory settings. If not, download the update.zip for w/e region you are in place it on your sd card. Enter recovery (Home + Power) and flash the update.
ok...so i tried the DREAMING file and it kept turning up no image found, alternatively i'm not sure what you mean by w/e region update. i ihavent come across that in my searches.
ok dreaming file did infact work. i feel better knowing that the phone isnt bricked. however after running the update when it prompts for action, i hit the trackball and i'm right back at the rgb screen..AGGGHHHH! sorry. i've been at this since 3pm this afternoon.
Chill. Don't freak. You can't just jump in and do something as soon as your read it. Read the whole thing and if you don't have the patients for this work on that before you work on this. bbreath.
I must say start by saying thanks guys. i stepped back, and actually took my [email protected]@ to bed. Rest does wonders. That said. I've accomplished the factory reset. so i back to a stock g1, and boy does it suck. As stated my phone WAS a dev 1. i've already started the upgrade process, my question at this point is where do you recommend i go from here. back to dev 1 or try one of the other roms. i've already installed the spl, and right now im stuck at the telnetd part of the root process. and this too may have me screaming by the end of the day...
any thoughts would be appreciated.
After the recovery image is installed you need to update the radio if you want to install a cupcake 1.5 ROM. You can get it here, rename 'update.zip', place on the SD card and boot in to recovery and flash. Then flash a ROM of your choice. You should be able to do that on RC 30, but I'm not sure if you need to install a rooted image first, so I'd wait for someone else's input before trying that.
I played it extra safe and used the rc29. as far as i know the proper radio is installed. i'll wait around before i do something stupid. thanks for the input tho. i'm trying to learn everything.
ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.
Future reference ^-^
In case you encounter this problem in the future, cause it can happen with flashing new roms if you skip a step:
You're only bricked if you are stuck at the G1 boot screen but can't get into recovery or fastboot, adb or anything. In cases where you can still get to other phone options to start over, rest assured your phone does still work, just need to step back and figure it out, which you did in this case with a little help ^-^ First few times doing anything to my phone, I went into panic mode a couple of times thinking I bricked until I read around and found out otherwise.
Just in case you didn't know these things, if you did, well, hope it was a nice read? ^-^
doctorfugazi said:
ok...so i went back to the original method for obtaining root. i was so frustrated last nite that i ended up trying to combine 2 slightly diff methods. at this point i call them the telnetd method and root.apk method. correct me if im wrong but niether one mentions the other. so i make it to the bootloader running the root.apk it runs thru the list and the fails at radio_v2. now im on the white screen wuth the skateboarders, the radio #says 1.22.12.29. so i run it again i
now im on the rgb screen at proceeds to attept the update again. this time the dreaimg.nbh fails. i'm not freaking out. im good. because i know im almost there. feedback appreciated. thanks in advance.
y'know i never thought about this..but if i reverted a dev phone to factory settings...did i relock everything? and for the record, i only have a mac. if that matters at all.
Click to expand...
Click to collapse
Well... if you actually purchased a dev phone it should not be sim locked.
Technically... after the rooting process, we all have dev phones with the exception of the sim lock.
So... what SPL are you using?
What ROM are you trying to install? Some roms you should consider partitioning your sdcard.
What radio do you have?
First thing is first.
Get the 1.4 recovery if you haven't done so already. 1.4 Recovery
Because this allows you to select any .zip file without having to rename it to update.zip. This saves on confusion so you don't try flashing a spl (like danger spl )before a radio (could brick your phone).
Second
You need the 1.5 radio to use cupcake. 2.22.19.26I
Third
Consider an spl. You have 4 choices. HARDSPL (Recommended), Eng SPL (what the dev phone defaults with.. skateboarding androids), the standard spl (nondev) and Danger SPL (risk bricking but worth it because you have more memory for your ROMs and can try HERO builds).
Fouth
Find your rom. NOTE: Read each post carefully! If it says you need a specific spl then get it! Otherwise it won't work. Some require the Danger SPL. If you chose a JF rom then you should be alright and don't even need to partition your card and it will work just like the OTA release. Some (such as Cyanogens 3.9.7) are experiemental and are not recommended for noobs.
Fifth (and probably the most important)
ALWAYS BACKUP WITH NANDROID!!!
In the event that you think that you've bricked your phone. I would say that there is a 90% chance that you didn't. As long as you have a nandroid backup and can get to the bootloader then you still have a phone. Just make sure the fastboot.exe file is in your sytem32 directory of your computer. Open CMD and cd to your fastboot backups saved on your computer. Simply
fastboot flash boot boot.img <enter>,
fastboot flash system system.img <enter>,
fastboot flash userdata data.img <enter>
fastboot reboot <enter>
and you should be back to where you were immediately after the point you backed up. Think of it as a system restore for Windows. It couldn't hurt to have a few backups stored.
If you have any questions or problems include information for us to read in a single post and edit as necessary.
Example:
AT&T
Cyanogen 3.9.7 Rom
Recovery 1.4
HARD SPL
Radio 2.22.19.26l
8GB class 4 sd card (7gb fat32/900mb ext3/100mb swap)
Theme version if any.
That way we know what we are working with.
Happy flashing.
rest assured i was in panic mode yesterday. but honestly the only thing i could really do was just step back for a while, meaning get some rest tackle it with a clean head. its frustrating for sure. this one guy tho who posted in the brick think tank thread...just cuz he couldnt figure things out in an hour he got pissed and started screaming waste of time this that and the other. total BI$CH! I was like whoa. I was at that point too. but Im not tryna be that guy.
Now, if could just figure out if i have to start from scratch, i just might be able to get my phone working again in time fro me to go to work tmrw morning.
So... what SPL are you using?
the hard SPL found here
What ROM are you trying to install?
Well i was trying to follow suggestion on something simple, like one of the early jesusfreke's. if i can step it up sure why not. but i'll pass on the partitioned sdcard setup for now.
actually I'll run with JesusFreke JFv1.51 US CRB43
What radio do you have?
radio number listed in my previous post.
Hey thanks by the way for taking the time out of your day to respond to this. i know u guys get your fair share of spazmiesters, so i appreciate it totally.
after doing research it seems that all the current roms require partitioning. or is that optional just for running apps to sd?
partitioning is optional of apps2sd for preformance. some like myself have three partitions, the third being for a linux swap
Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)
doctorfugazi said:
Ok ive final decided on the dudes cupcake 101. the ? i have now is do i start from scratch. im kind of in limbo as i'm stuck on the bootloader. if remember correctly i got half way thru the root process and it went down hill from there.
TMobile
RC29 / previously Dev 1
Recovery 1.4
HARD SPL
Radio currently 1.22.12.29 / trying to get to 2.22.19.26l
4gb card
(hope i did that right)
Click to expand...
Click to collapse
Okay... you have the recommended recovery and spl.
So all you need to do is get your rom and radio and store the zip files to the root of your sdcard. You don't need to rename them.
Just boot in recovery (power+home) and scroll down to:
[Alt+A] apply any zip from sd
And then you should see the zip files.
Upgrade your radio first.
Then your rom.
Another note... make sure you have a data plan once you've installed your rom. Depending on your rom version, you may not be able to sign in without one. If you can't sign in, you can't use your phone which is why most would recommend a custom rom or an adp rom.
Now... if I'm not mistaken... you do NOT have to partition your sdcard to install a rom (unless it's a HERO rom).
You may want to consider doing so however.
The advantages are that you can have virtually unlimited storage for apps and it's much easier to restore them after a wipe because they are still on your sdcard. Some apps will recognize the partitioned sdcard and automatically do all the apps2sd work for you by default. It is also recommended that you use at least a 2gb class4 card at MINIMUM. Any slower then a class 4 may result in system crashes and errors. Any less then a 2gb card is almost not worth all the effort since you'll likely be using at least a quarter of it for the apps2sd. I would suggest buying at least a 8gb class 6 card for less then $50 online. It's both fast and plenty of storage. With apps to sd, if you do need to wipe you still have all of your apps installed. A great advantage of having apps2sd.
Also... try different roms! There are DOZENS out there! Some have the htc music installed, some have myfaves, some have special cameras, etc. Don't be afraid to experiment. As long as you have a backup and can get to the bootloader (skateboarding androids) and a pc, you can't go wrong! If fact... with the 1.4 recovery you can store several different roms on your sdcard, backup your current rom, wipe, flash a new rom to try it, wipe, flash a different rom to try that one, etc. If you decide that you didn't like any of those... just restore back to your previous backup. Simple as that. No pc needed. However having a pc is handy to get logcat information if it's not booting for some reason.
Speaking of roms not booting... while your experimenting with various roms... you MUST have patience. Sometimes (based on my personal experience with about 10+ different roms) they can take up to 15 minutes to boot up. You can literally be staring at the ANDROID or HTC logo this entire time. Unless you are using ddms.bat or adb shell logcat, you will be clueless of whats going on. DO NOT do anything unless you get the infamous "boot loop". This will be obvious. It will stick at the ANDROID or HTC screen for a while and then blink and go back to the logo. If you see it blink and go back to the logo then try pressing power + talk + menu to restart it and then immediately press the home button to bo back to recovery. Wipe... try again. This time it should work. If it doesn't then restore your backup while you research on that partitcular rom. You may have skipped a step or not have the proper requirements (partitioned card, spl, etc).
With all of that said... good luck and you'll be posting help to other users like yourself before you know it.
Hey Doc, if I'm not mistaken (other guys correct me if I'm wrong), if all, and I mean ALL you have is a boot loader (AKA SPL. ie// skating androids or colored bars) you need to reflash dreaimg.nbh to get a system back.
This ALSO flashes your SPL and RADIO back to default so reflash your radio and SPL afterward. (IN THAT ORDER I HOPE)
Binary100100 is a gentleman and a scholar
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.
innerspace said:
nicely written response binary.
I can't stress enough how helpful it is to have the sdk working on a computer when flashing new roms. Get ADB working, it'll save you a ton of headaches.
Click to expand...
Click to collapse
Thank you! I do what I can.
Hello All,
I'm starting a new thread, because I am in a situation where I want to get my girlfriends phone back to stock so I can warranty it, and hopefully someone here will have the answer and people will have one place to look for putting their Roger's Samsung Captivate back to stock.
I'm hoping someone can tell everyone why we can't seem to get back to stock on these ROM's, here are the things I've tried:
Originally cleared everything rooted the phone through an update.zip, then put on the Clockworkmod Recovery and flashed Cognition v2.3b8, Trying to fix, battery life and lagging issues on her phone, (had a couple of random restarts the day before I flashed, so I was hoping it would fix that).
Then she started noticing the random restarts more often, so I tried:
clearing everything again through the recovery and tried restore from my backup to put things back, it looks like it extracted (or Installed) successfully then when it boots, it gets to the black, "Swipe" screen, then it freezes.
I tried to flash the Rogers_Stock.zip, same thing. Then I extracted the zip, and put it into the backup folder, hoping it will restore it like a normal restore, same thing.
So right now I'm stuck with a phone that says AT&T when it boots (I read one post on how to remove that) and cognition boot up.
Basically, I want to get this to look enough like stock to return.
I was thinking I can try to get rid of that AT&T popup, then flash the stock ROM, and say it just stopped booting for some reason. But then I still need to get rid of the Clockworkmod Recovery.
Wow that was a mouthful.
Thanks in advance for any help anyone can provide for use Roger's users (or their significant others).
AZ
try this: http://forum.xda-developers.com/showthread.php?t=867617
There are others like it too. Just don't try flashing the bootloader or sbl !
AbsoluteZero said:
Hello All,
I'm starting a new thread, because I am in a situation where I want to get my girlfriends phone back to stock so I can warranty it, and hopefully someone here will have the answer and people will have one place to look for putting their Roger's Samsung Captivate back to stock.
I'm hoping someone can tell everyone why we can't seem to get back to stock on these ROM's, here are the things I've tried:
Originally cleared everything rooted the phone through an update.zip, then put on the Clockworkmod Recovery and flashed Cognition v2.3b8, Trying to fix, battery life and lagging issues on her phone, (had a couple of random restarts the day before I flashed, so I was hoping it would fix that).
Then she started noticing the random restarts more often, so I tried:
clearing everything again through the recovery and tried restore from my backup to put things back, it looks like it extracted (or Installed) successfully then when it boots, it gets to the black, "Swipe" screen, then it freezes.
I tried to flash the Rogers_Stock.zip, same thing. Then I extracted the zip, and put it into the backup folder, hoping it will restore it like a normal restore, same thing.
So right now I'm stuck with a phone that says AT&T when it boots (I read one post on how to remove that) and cognition boot up.
Basically, I want to get this to look enough like stock to return.
I was thinking I can try to get rid of that AT&T popup, then flash the stock ROM, and say it just stopped booting for some reason. But then I still need to get rid of the Clockworkmod Recovery.
Wow that was a mouthful.
Thanks in advance for any help anyone can provide for use Roger's users (or their significant others).
AZ
Click to expand...
Click to collapse
Gin's got you on the right path for sure. A couple more items for you:
This post should help with removing the AT&T bootup logo: http://forum.xda-developers.com/showthread.php?t=849789
If you use Heimdall to flash the Rogers stock firmware that is in the post the Gin linked to then you will absolutely need to follow the instructions to use the Heimdall drivers for your captivate when it's connected or it won't see the device when you tell it to start. Like gin said, don't touch primary or secondary bootloader, leave those out and don't try to repartition it.
Restoring the stock firmware will remove the custom kernel that is installed with Cognition (at least it should) and so the Clockwork recovery should no longer be installed once the restore to stock is done. You can double-check once you are back to stock by powering off the phone and then hold both up and down volume + power, let the power button go after it restarts once and you see the I896 for the 2nd time. It should take you to the stock 2e recovery screen. If it does, you should be golden.
HTH
Wow, thanks all,
I used that method without the PIT file,
I just want to say thanks to everyone that offered help,
Goina try to send it for warranty now.
thanks again,
Joe / AZ
Sprint Hero
8gb new SD card
Was rooted to a cyanogen mod 6 (???)
The other day my sd card needed to be replaced. This card had my backup info on it, but became corrupted. I tried using various utilities in Win7 to try to fix the card, but had no success. Somewhere during the process of everything, I must have erased/corrupted the info on the phone itself, as it will no longer boot.It just freezes at the HTC screen.
I am trying to flash a new rom to the phone via the sd card using the hboot method. I have tried various roms, and had one actually start to install itself, but at the end it said the system info is older (not sure of the exact words) and would not proceed. So now I am stuck in what to do.
I want to get my phone working. I don't care if it is the basic stock OS, or something better at this point, as I can mod it once get it up and running. I am able to get to the clockword recovery prompts (if this helps any).
Any help in resolving my problem would be appreciated! Specific steps would even be better
I can't stand being without a phone... and this is driving me crazy!
U still have a recovery on ur phone?
Sent from my HTC Hero CDMA using XDA App
i have clockwork, if that is what you are referring to???
Run the RUU from bootloader and restore to factory. Re-root and you'll be good to go.
If you still have Clockwork recovery you can flash a new ROM from there and the problem should be fixed as well.
Is this a new ROM you are working on?
Thank you.. I think I have it working again.. I downloaded a rom from this link... http://forum.xda-developers.com/showthread.php?t=581521 and it booted back up....
so, if I want to go to a different rom, say CM 7, or even a different one all together... I can do it from here using rom manager, right ??????? Thanks for your help!!!!!
Did you make sure you were fully charged. My phone sometimes refuses to get past the white HTC screen. If I make sure it's charged and sometimes I pull the battery and just let it sit. I always boots. It never did this on any rom previous to gingerbread. I would do this before spending an hour or two rru'ing or reflashing. My phone didn't seem to like the cwr 3.0.0.5 either, lots of booting issues. I had to downgrade back to 2.5.whatever. Looks like you got it fixed though.
Sent from my HTC Hero CDMA using XDA App
Moved to Q&A...
I've been looking, but can't find the stock rom. Can anyone point me in the direction of the stock rom that I can flash from the memory card?
Easiest way to flash back to stock is using a one-click Odin. Here is the topic with instructions and such.
http://forum.xda-developers.com/showthread.php?t=731989
mepis said:
I've been looking, but can't find the stock rom. Can anyone point me in the direction of the stock rom that I can flash from the memory card?
Click to expand...
Click to collapse
Search,"captivate stock rom" rite there in the search bar at the top. Will take you rite where you need to go. Also this belongs in q&a
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
This may work as a last resort. I'm trying to track down stock files to flash from the memory card. I work at an AT&T device support center. Having the stock files to flash would save a world of headache for a multitude of reasons.
I'm trying to avoid having to connect phones to a PC to flash. Doing this would mean I have to bring my laptop with me to work all the time. We don't have admin privileges to install anything at work, and I'm not looking to lose my job bypassing that.
I can also train my staff much easier to use the recovery or boot loader to flash from a memory card. I have them set doing hard resets that way as is. Flashing wouldn't be a far leap.
But yeah, we see plenty of phones that a simple flash would fix, as opposed to giving someone a refurb device. Also, I have to turn away rooted users. I could easily flash the phone before sending it out if I can track down the files for the phones we carry.
brd912 said:
Search,"captivate stock rom" rite there in the search bar at the top. Will take you rite where you need to go. Also this belongs in q&a
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I appreciate the advice. When I tried searching I wasn't netting results for my specific needs. Just stock rom questions.
If you worked at AT&T and you used any of our software in your work they would fire you!
and train your staff to do so? you are asking for trouble.
and the only way to flash it from the SD card (internal only not external) you have to use a hacked ClockworkMod Recovery or hacked 3e recovery. MORE REASON TO GET FIRED.
Use your approved software only.
Samsungs official tools are ODIN one click for ATT stock eclair and ODIN3 flashing utility, which uses tars. BOTH run from PC only.
Maybe that is just a HTC feature then? I know with the inspire and Aria I can use a stock zip file and reflash the phone from the stock recovery menu. I could have sworn You can use an update.zip to do the same with the captivate as well.
And keeping software off the work PC is my primary goal. We have enough pull with our market manager we can use sd cards to reflash phones. Doing so from a PC is not doable. I'm also only looking for stock roms. Flashing stock roms would be acceptable.
At any rate, I'm not looking for a flame war either. My concern is being able to help the customers first. We subcontract for AT&T. My concern is not AT&T, but the customer themselves. Which is the reason I can bend a few rules here and there for certain things.
For instance I had a customer the other day that bought an inspire from a corp store. The camera app started freezing. The phone was still DOA. The corporate store was out of stock. In this case the customer's official options were to wait via mail, or exchange for a refurb through us. Thankfully I own an inspire and had my laptop with me at work that day (unrelated project). I keep the stock PD98IMG.zip on my laptop as a back up just to be safe. Reflashed his phone with stock image. Issues were resolved for the customer. Everyone was happy.
mepis said:
Maybe that is just a HTC feature then? I know with the inspire and Aria I can use a stock zip file and reflash the phone from the stock recovery menu. I could have sworn You can use an update.zip to do the same with the captivate as well.
And keeping software off the work PC is my primary goal. We have enough pull with our market manager we can use sd cards to reflash phones. Doing so from a PC is not doable. I'm also only looking for stock roms. Flashing stock roms would be acceptable.
At any rate, I'm not looking for a flame war either. My concern is being able to help the customers first. We subcontract for AT&T. My concern is not AT&T, but the customer themselves. Which is the reason I can bend a few rules here and there for certain things.
For instance I had a customer the other day that bought an inspire from a corp store. The camera app started freezing. The phone was still DOA. The corporate store was out of stock. In this case the customer's official options were to wait via mail, or exchange for a refurb through us. Thankfully I own an inspire and had my laptop with me at work that day (unrelated project). I keep the stock PD98IMG.zip on my laptop as a back up just to be safe. Reflashed his phone with stock image. Issues were resolved for the customer. Everyone was happy.
Click to expand...
Click to collapse
stock zip files are usually updates , OTA type of thing .. maybe HTC has full wipe version available ...
Have you looked at Heimdall? It's supposed to be a cross platform tool. Google it and see what you get.
yeah i wasnt trying to flame but i was trying to make sure you understood what you were asking...
the only way i could see doing it, to get stock with no PC...
you need eclair with 2e recovery (doesnt need signed update.zip files)
rename any "Stock.zip" to update.zip and copy to sd root
boot into 2e recovery "install update"
if you arent eclair, you must root, fix the recovery with 3e fix in my sig, use hacked 3e to flash....
most stock roms are still UN rooted, so all will be good after flash.. (as far as rooting and 3e)
here is a Jh7 stock
http://www.ponack.net/designgears/JH7_OTA.zip
too bad you arent rogers, i have most of their stocks in zip and odin...
TRusselo said:
yeah i wasnt trying to flame but i was trying to make sure you understood what you were asking...
the only way i could see doing it, to get stock with no PC...
you need eclair with 2e recovery (doesnt need signed update.zip files)
rename any "Stock.zip" to update.zip and copy to sd root
boot into 2e recovery "install update"
if you arent eclair, you must root, fix the recovery with 3e fix in my sig, use hacked 3e to flash....
most stock roms are still UN rooted, so all will be good after flash.. (as far as rooting and 3e)
here is a Jh7 stock
http://www.ponack.net/designgears/JH7_OTA.zip
too bad you arent rogers, i have most of their stocks in zip and odin...
Click to expand...
Click to collapse
Hey Tru, talking about that. Do you have a cwm flashabled rogers 2.1 and 2.2 ROM? (that would come with the original kernel and modem)
I don't need it atm but would be a nice backup and I don't really like Odin, for personnal reasons lol
So final answer is, yes or no, not possible to restore to stock (or near stock) with no PC?
Currently running 2.2.1 custom rom and the PC/Captivate no longer talk to each other. (not the cable, the pc, the usb port, rear port, etc...)
EDIT
Well, flashing the above ROM via CWM bricked the phone (more or less). Now only boots to the AT&T splash screen and just sits there.
Which is fine with me, I'm sending it in for repair anyway as the USB to PC doesn't work so good luck trying to recover this POS...5th Captivate for me.
reboot into recovery and clear data and cache.
then it will boot normally
Hi all its been awhile since i have been here on XDA
Anyhow i bought a HTC mini 2 and it has the cynogengenMod 11-20141112-snapshot-m12-memul.
Before i start the issue is actually this lock screen called TWRP that and its a lock screen that comes up randomly then crashes the phone. it has happened a few times like browsing my phone or taking a picture. Its the one with a padlock.
So what i would like someone to help me to get it back to the original rom. I am using a European handset i am assuming due to buying it here from some ebayer.
What i understand is to get the actual stock rom and to use some sort of programme to put it on with. I have read quite a lot of pages and it talks about radio rom and recovery stuff so im a bit clueless where to start really.
Some help step by step would be nice and links if possible to where i can get the required files.
http://forum.xda-developers.com/one-mini-2/general/stock-rom-please-t3243417
Are this link any good to get the ball rolling but i would not have a clue what to do with the files even if they was the right ones.
EDIT: I have gone to the recovery mode for teamwin by holding volume down + power is their something i can do from their maybe???
The Baseband is 1.101.110219.1017_10.26.41.4149.00L (if it matters)
Kernal Version 3.4.0-gg001341f (if it matters)
badman112 said:
Hi all its been awhile since i have been here on XDA
Anyhow i bought a HTC mini 2 and it has the cynogengenMod 11-20141112-snapshot-m12-memul.
Before i start the issue is actually this lock screen called TWRP that and its a lock screen that comes up randomly then crashes the phone. it has happened a few times like browsing my phone or taking a picture. Its the one with a padlock.
So what i would like someone to help me to get it back to the original rom. I am using a European handset i am assuming due to buying it here from some ebayer.
What i understand is to get the actual stock rom and to use some sort of programme to put it on with. I have read quite a lot of pages and it talks about radio rom and recovery stuff so im a bit clueless where to start really.
Some help step by step would be nice and links if possible to where i can get the required files.
http://forum.xda-developers.com/one-mini-2/general/stock-rom-please-t3243417
Are this link any good to get the ball rolling but i would not have a clue what to do with the files even if they was the right ones.
EDIT: I have gone to the recovery mode for teamwin by holding volume down + power is their something i can do from their maybe???
The Baseband is 1.101.110219.1017_10.26.41.4149.00L (if it matters)
Kernal Version 3.4.0-gg001341f (if it matters)
Click to expand...
Click to collapse
Stock ROMs : http://forum.xda-developers.com/one...one-mini-2-t3250020/post63859743#post63859743
Hi,
You did not mention your SW version, the stock ROM is for this version 2.18.401.3.
Now in your bootloader if you have the OS 2.19.401.2 you will not be able to flash the stock Rom in the link as the stock is for a lower version unless you have S-Off, so you can use TWRP and restore backup image through TWRP..
Steps:
- Download the backup image, extract the contents of the RAR file, place in Root of SD card
- Enter TWRP recovery
- Erase Cache, Data, System, Internal Storage
- Choose Restore and select the backup folder
- it will take about a minute or 2
Thanks about it...