hello, is there any why to anable the standart keylook from win mob 6.5 when the device wake up ? when i press the pwoer button the device wake up but the are no look screen using the Touch-IT_Leo_v11_ger but had this problem with all roms ive tested. so is there any way to enable this?
Hi ngt1337,
what is the keykook? Do you mean Keylock or standard WM6.5 Today look?
If you need key lock, just press the end key and keep it pressed until the screen lock. Then, only the power button will work.
If you want normal WM6.5 look, well, flash a plain WM6.5 ROM or disable Manila in Settings --> today.
Hope this is what you were asking for.
i want to use the standart screenlook from winmobile 6.5 but i want it when i press the power button and then device wakes up on the lookscreen when i press the end key button and hold it nothing happens
Which ROM are you currently using? It is strange that the endkey does not work. Search for "lock app" in Application section of X1 forum, there was a program like the one you are asking for (can't remember the name, sorry).
Touch-IT_Leo_v11_ger und auch X1O_LEO_21876_Final_R3A_Hybrid_German at both nothin happen when i press and hold the key... any solutions ?
how to enable this when device wakes up???
only want to see this when device wakes up ( or when i press the power button )
what must i do to see this when device wakes up?
keylock
you wil have to install THIS!!
When you have installed Smartlock you must go to the settings of it en mark only WM 6.5 New lock and Stand-by trigger lock screen
I use it with Touch IT leo v11 NLD!
works perfactly thanks so mutch!
Related
I was wondering is there a app that will lock my Diamond by clicking a shortcut?
I don't want S2u2 it's buggy imo. But i would just like to use the std. locking through a shortcut.
Pressing and holding the hang-up button just doesn't work for me.
If pressing and holding a button for 2 seconds is too hard for you then perhaps you should consider buying a slave to do it for you....
It isn't the fact that i don't wanna push it.
But after using it one week i already notice that the pad hangs to the hang-up button a heightdifference of a mm is already present.
I don't like that so i'd rather push a shortcut.
I press the power button briefly, not sure if that's lock, but it works for me.
chech the thread "Lock Screen or put into "standby"? Best set-up?", post 9 & 10.
MSSH said:
I was wondering is there a app that will lock my Diamond by clicking a shortcut?
I don't want S2u2 it's buggy imo. But i would just like to use the std. locking through a shortcut.
Pressing and holding the hang-up button just doesn't work for me.
Click to expand...
Click to collapse
You could do HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLock Enable from 0 to 1 and everytime your backlight goes off (which is quite quick with the Diamond) the device will automatically lock
Ensure that Long Press End Key is set to lock your device (Start -> Settings -> System -> Long Press End Key -> Automatically execute the seleted action: Lock device.
Next open a registry editing program and navigate to HKLM\Software\HTC\Manila\HomeLSKPath and enter \windows\endkey.exe.
Then navigate to HKLM\Software\HTC\Manila\HomeLSKText and enter Lock (or whatever text you want to be displayed on the button).
Save the changes and soft-reset the device (or disable and re-enable HTC Touch Flow 3D) to implement the change.
Personally i've started using Sensor Lock which seems to work really well
http://forum.xda-developers.com/showthread.php?t=422871
Locks and unlocks by rotating the screen. Has lots of nice options and locks the hardware buttons too which is good.
PocketShield looks pretty cool. It's around $11 if you decide to buy it.
Hi guys, i know how to change the soft key on the home screen - but does anyone know if and how you can change it so that the soft key just locks the keypad?
thanks
jimmeh1988 said:
Hi guys, i know how to change the soft key on the home screen - but does anyone know if and how you can change it so that the soft key just locks the keypad?
thanks
Click to expand...
Click to collapse
search the internet for the programm "devicelock.cab". Install this programm and change the function of the left softkey to this devicelock-programm. You find in the tweak-section how to change the softkey.
Hope this helps.
Bye
This small app will lock and turn off your phone. Hope this will help you.
If you press an hold on the 'end call' button it locks the phone.
does the lockandoff program work with diamond ?
dat would be awesome not having to wait for it to timeout after locking the keypad
caljitu said:
does the lockandoff program work with diamond ?
dat would be awesome not having to wait for it to timeout after locking the keypad
Click to expand...
Click to collapse
Yes, it does works with Diamond. I've been using it for a month.
MikeSel^ said:
If you press an hold on the 'end call' button it locks the phone.
Click to expand...
Click to collapse
..yes you are right, but not only the lock function, really useful
i also have a question, once the htc is locked can i still answer my phone call in "locked mode" ?
and ..
why not implement in the setup: lock and turn off htc ?
ljazzo1 said:
..yes you are right, but not only the lock function, really useful
i also have a question, once the htc is locked can i still answer my phone call in "locked mode" ?
Click to expand...
Click to collapse
why you just don't try it?
MaverickCH said:
why you just don't try it?
Click to expand...
Click to collapse
Because its pretty hard to call yourself to test!?
I tried it and when the phone rings it get's unlocked to be able to touch the screen... This program works exaktly as holding down the End Call button.
why not use S2U2 and link a softkey to ilock ?
Tried S2U2 and it works a bit better... To bad the screenbuttons can't be locked while a caller rings the phone. Want to remove any accidently answering/declining when pulling the phone out of the pocket....
That is an option in S2U2. Its exactly why I use it.
thank you mate
Thanks guys for your answers - those of you who said hold down the end key - i should have said - i do know that you can do that, but it just feels way to long winded and i wanted a 1 button press rather than holding the phone for about 5 seconds to lock it. Ive been using the lockandoff.exe, i like it. my only problem is, its starting to bug me that the light is always dim when the phone is locked - i have tried changing this with Advanced Config but it sticks and doesnt work. any guesses?
S2U2 is far and away the best and most comfortable locking solution for wm. in my opinion.
when i lock my HTC with devicelock and a call is coming in it will "UNLOCK" my HTC. I would prefere my HTC will keep locked until i unlock it
what do you think ? can the developer implement / change devicelock or maybe at least let the user choose if he want unlock the phone when a call is coming in or not. It happen already, when my HTC is in my poket and i rush to answer i press the wrong button and maybe close the call
A question: i set my devicelock to lock my HTC when i hold down the Phone OFF key. How to enter devicelock.cab settings if i want to change parameters? default i can enter settings by hold down the Phone OFF key, after i changed i don't know how
I also tried to uninstall devicelock with HTC software remove, it say ...removed but it is still inside because i still can use the"unlock" function. I don't know how to uninstall .....
So...
1. Install S2U2 v.16 from here: http://forum.xda-developers.com/showthread.php?t=412418
2. Disable any other locking programs or settings; could be used for autolocking only "Turn off backlight if device is not used for 30 sec" on Start\Settings\System\Power\Advanced.
3. Install a registry editor (my favorite is SKTools v.4.3.1.2)
4. Open HKLM/Software/HTC/manila/HomeLSKPath, which is the left softkey (Standard = Phone, but nothing is listed there), and write here: \Program Files\S2U2\s2u2.exe
5. Open HKLM/Software/HTC/manila/HomeLSKText and write here: Lock (or anything you want for the name of the button)
6. Close registry editor and... you could lock your device anytime you want!!! The left soft key that was "Phone" on default TouchFlo 3D is now "Lock" (the Phone key is already present on hardware buttons, so nothing to loose...)
Many thanks for this to A_C and mkhattab.
But this version seems cannot lock the Home key, any idea?
if you press the home button, it will unlock, but only for a second. It then automatically goes back to s2u2 screen. Although it is still possible to use touchscreen during that brief moment..
thnx.. this is a great tweak!
i did the same thing after installing the s2u2 but after a while i realized that this method has 1 disadvantage: anytime you want to lock you have to go "home first" and only in the "home" tab you can lock the device.
how i solved? i used HButton and put the lock on the "call" hardware button.
now, it doesn't matter in witch tab i am..long press on "call" and my diamond is locked.
KukurikU said:
i did the same thing after installing the s2u2 but after a while i realized that this method has 1 disadvantage: anytime you want to lock you have to go "home first" and only in the "home" tab you can lock the device.
how i solved? i used HButton and put the lock on the "call" hardware button.
now, it doesn't matter in witch tab i am..long press on "call" and my diamond is locked.
Click to expand...
Click to collapse
Thx for this tweak...!
Toni
Guys am i doin something wrong?
I got my HTC Diamond yesterday and been using it for a day now... i just press once on my power button every time i dont use my phone, and in that "mode" my phone is locked and in standby mode too. U cant use any keys apart from power key which brings my phone from "stand by" mode to normal mode?!
Is this way safe? To me, looks ok.
I think my rom is 1.93.0.0. this is original phone rom (not cooked one)?
Any suggestions/advices?
Karbo81 said:
Guys am i doin something wrong?
I got my HTC Diamond yesterday and been using it for a day now... i just press once on my power button every time i dont use my phone, and in that "mode" my phone is locked and in standby mode too. U cant use any keys apart from power key which brings my phone from "stand by" mode to normal mode?!
Is this way safe? To me, looks ok.
I think my rom is 1.93.0.0. this is original phone rom (not cooked one)?
Any suggestions/advices?
Click to expand...
Click to collapse
start-settings-system-power-key lock-> check "do not lock buttons" , and after this you could use my instructions on the first post to lock your Diamond with style...
If you want, I could provide you an registry tweek that will lock your phone automatically when the light is dimed. To unlock, you should press a softkey "Unlock device".
Or you could tell me what is your more convenient scenario for lock and unlock and maybe we could help you!
testerics said:
If you want, I could provide you an registry tweek that will lock your phone automatically when the light is dimed. To unlock, you should press a softkey "Unlock device".
Click to expand...
Click to collapse
I would really like to know that. Can you tell me?
Thanks!!
C.QL said:
I would really like to know that. Can you tell me?
Thanks!!
Click to expand...
Click to collapse
Modify registry:
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockEnable , change from 0 to 1 and everytime your backlight goes off the device is locked.
testerics said:
Modify registry:
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDeviceLockEnable , change from 0 to 1 and everytime your backlight goes off the device is locked.
Click to expand...
Click to collapse
Thanks a lot
cannot unlock
hi there everybody
I've installed s2u2 and i think i did something really wrong in the settings...
the problem is: i have no " slide to unlock " so i cannot unlock my precious diamond, and i need it now ! plz help
i fixed it thanks anyway
KukurikU said:
i did the same thing after installing the s2u2 but after a while i realized that this method has 1 disadvantage: anytime you want to lock you have to go "home first" and only in the "home" tab you can lock the device.
how i solved? i used HButton and put the lock on the "call" hardware button.
now, it doesn't matter in witch tab i am..long press on "call" and my diamond is locked.
Click to expand...
Click to collapse
hi there!! can you please explain me how can i do that???
thanks!!!
ehh I have done the other way around.. set it to 0 so I don't have that option anymore, but even after soft reset it still locks.. any ideas??
ehh I have done the other way around.. set it to 0 so I don't have that option anymore, but even after soft reset it still locks.. any ideas??
Hi, im quite new to the Touch Diamond Pro. Is there a program that displays on the main screen a button to lock the Touch pro (Raphael) ?
I found some programs to turn and it locks, to take out the styles and put it back in it locks, but nowhere a simple program that had a button (for instance next to the time...) that displays a lock icon, wich is pressed and the Diamond is locked.
Hope someone can help me. Thanks
The default Windows Mobile home screen(Today screen with TF3D turned OFF) has an option for this under Settings>Today>Items.
Don't know about similar option/program when TF3D is ON.
Hold the end key for 3 seconds and you should get a menu including a lock option. You can set this program to automatically lock without showing the menu.
The program that makes this work is Windows\Endkey.exe so you can assign this program to your left soft key for quick access.
hia!
Is it possible to make the phone lock (move go to the slide-to-unlock screen default on winmo 6.5) when i press the powerbutten (sleep?).
I have yet to find a settings for this. Right now i need to first lock screen (hold the end call button) and then press powerbutton.
Is there a app to make powerbutton do both things at once?
also itnerested ... There is a setting so that phone locks after a period. Would that do the trick? Let me see
edit: don't know, can't find that setting any more. Anyone got an idea?
here is the link for automatically lock the screen
http://forum.xda-developers.com/showthread.php?t=505032
i do not know if there is an application to make the lock loks like WM6.5
I'm using this http://forum.xda-developers.com/showthread.php?t=386451
Very simple application that automatically lock your phone when you press the powerbutton. When you press the powerbutton to wake your phone up, it showed the slide to unlock screen in WinMo 6.5.
I am using point UI 2 pro, and in that version it will auto lock your phone anytime you press power. Works great in winmobile 6.5