Related
Just got my Tilt last week, and of course had to upgrade to PDA Personal Max plan (had been using MediaMax successfully with my Wizard). But I figured the increased cost was worth it, and that also I'd be able to access isp.cingular (which I had used before when I was on PDAunlimited plan)
Couldn't access ISP at first, so I called tech support. Very nice lady said "You were on MediaMax, now you've upgraded to PDA Personal Max but they haven't turned ISP on - I will do that for you". She did, it worked, no problem at first. Download speed reported by DSLReports was in 600's, vs. 400-500 when on WAP (on Denver's very recently activated 3G).
Then 2 days ago it quit working. I called - first guy couldn't understand what I wanted, kept trying to step me through configuration in Connections for WAP - I said I've already got that going, with and without proxy, no problem. So he says "Then what's your problem?" I say I'm paying for it, I should be able to access ISP, please be sure it's turned on. He doesn't seem to have a clue as to how to do this, or why I would want to. Call ended in frustration.
Next guy I talked to said "ISP is only for tethered plans". I said, "Oh, really, then what am I paying extra for my plan vs. MediaMax?" and he gives me the song and dance about how MediaMax is for Smartphones and PDA Max is for PDA's. I said I didn't think he knew what he was talking about and hung up.
So, what is the real deal? Shouldn't I be able to access ISP?
Would like to hear other's experiences - especially if successfully using ISP and not on tethered plan.
Hey I went through the same exact issue with AT&T about this isp vs wap. Reading all the talk about how isp was better I had my phone upgraded to it. Everything was working fine until around the time I got 3g service upgraded to my area. I noticed I could not connect anymore so i went back to the old wap settings and everything went through. I do not think it is because of 3g that I can't access isp anymore it's just the timeframe in which it happened. Anyway now when you call AT&T it is almost like they got brainwashed into thinking that isp is only for tethering plans. Even though I tell them I had this configured to my account before it literally seems like that they had that memory wiped out from their recolection. Anyways I guess I am not too upset since 3g was upgraded to the area however having access to isp and ispda would be really great. If anyone is lucky enough to devise a way to get this feature added to their 39.99 plan that would be awesome. However like cushcalc said earlier and like what I have gone through it seems that now isp is now tied to tethered $59.99 plans instead.
Also I wanted to add 1 thing to this. All reps swear that this does nothing to increase your speed however they have now become so resistant to even add this feature now to $39.99. So if it's really the same thing why all the hassle to give people what they want?
It takes time to talk to the RIGHT rep.
Don't worry, i went through the same thing. Until i spoke with a lady and told her that "my wap settings works correctly, but i don't want to connect it using wap.cingular anymore, i want to be able to connect to isp.cingular." She did go on mention about the tethering and blah blah blah. And i told her "im not tethering, i need isp.cingular because it assigns an IP ADDRESS to my phone so i can access my computer remotely when im away from the office from my PPC Phone." In conclusion, she did some research and it seems like there's two different $39.99 pda unlimited plans. So i told her i want the pda unlimited plan that has isp.cingular support and for $39.99. So in conclusion, i guess the rep needs to know the difference of the two. Not sure if this helps, but that's how i got my isp.cingular to for for unlimited us at $39.99 a month.
Ok, i just got my tilt a few days ago, it's my first pda/smart phone, what ever. Whats does all this mean and how do i check which i have. i'm on a 39.99 data plan.
I've tried accessing isp.cingular many times.
Always fails.
After reading this post I decided to give them a call seeing as I have the 39.99 PDA Plan.
Well after getting transferred a couple times, the guy told me my phone was provisioned to access either of the APN's, wap.cingular or isp.cingular.
I think I will keep calling back every day until I get someone that knows wtf they are talking about.
I need to be able to access my work VPN, and have to have a static IP
I've been back and forth with AT&T on this. I'm also in Colorado (but Colorado Springs, not Denver) and we just got 3g as well.
I called about needing isp.cingular to access my home VPN. The first rep told me I had to get the $79.99 tethering plan. I said no thanks. I called again the next day and got a rep who knew actually knew what she was talking about.
She said that feature could be added to my account for $3 a month. I agreed, she made the changes, and I hung up the phone happy. I rebooted the phone (her instructions) and tried to make a connection to isp.cingular. No go. Same error message I always get.
Can someone on this thread verify the connection settings?? This is what I have:
Access Point
ISP.CINGULAR
Username
[email protected]
Password
CINGULAR1
I haven't tried calling back yet, but maybe I will tonight.
PDA Connect can connect to isp.cingular. PDA Personal Max cannot. You need to have them change your plan to PDA Connect and you'll be able to access isp.cingular again.
Someone who can connect to ISP, go into your wireless account screen and get the Plan name. Mine is: PDAPERUNL1500MSG and I can't connect to ISP.
here is the weird part, when I activated my phone and called in for it, the rep told me the PDA plans were EXACTLY the same, same cost, everything else the same, except one included 1500 messages. I made him repeat it and said "So there is NO difference whatsoever except one has 1500 messages included?" He said Yes, so I went with it. But I'm willing to bet, the one w/o 1500 messages allows you to connect to ISP.
Ugghh...
Read my post above yours again. That's exactly what I'm saying. I currently have a tethering plan, but I used to have PDA Connect Unlimited and could use isp.cingular also.
You CANNOT use isp.cingular with the PDA Personal plans.
URPREY said:
You CANNOT use isp.cingular with the PDA Personal plans.
Click to expand...
Click to collapse
Then why did the AT&T rep tell me I could, but it would cost me an additional $3 a month?? (see attached pic)
Flapjack said:
Then why did the AT&T rep tell me I could, but it would cost me an additional $3 a month?? (see attached pic)
Click to expand...
Click to collapse
Did it work? Just because a front-line support person tells you something doesn't make it true.
Flapjack said:
I called about needing isp.cingular to access my home VPN.
Click to expand...
Click to collapse
I'm on the media max plan and VPN just fine.
I've personally done both IPSEC and PPTP vpn on wap.cingular
DLD
URPREY said:
Did it work? Just because a front-line support person tells you something doesn't make it true.
Click to expand...
Click to collapse
Obviously, I have to follow-up. The charge is there, for "static IP", which is promising. I will call tomorrow if I have time.
RacerX10 said:
I'm on the media max plan and VPN just fine.
I've personally done both IPSEC and PPTP vpn on wap.cingular
Click to expand...
Click to collapse
I can't seem to make it work! I can connect from another network w/o issues, I just can't from my phone. The only place I see to add the VPN connection is under my "Work" network settings....
If someone would enlighten this OLD dog, I would like to see if my TiLt will connect with the isp.cingular.com
Only problem and reply I can use would be to tell me how and where to adjust the settings.
Be kind.....newb at play with my new toy!
Try this
Try and call them and ask them to set you up on this one "PDACnctUntlAdd" that is the exact name i got when i went to the features page on my at&t account online. And it's only for $39.99 and my isp.cingular works perfectly with 3g connections.
Out of curiosity I tried changing my Tilts MEdia Net settings to go to isp rather then wap, and couldn't make a connection.
Portland Oregon Area, with the 39.99 PDA Personal w/ 1500txt
I get 500-900 on the 3G out here, 80-150ish on EDGE, and around 1.6mbps on my wifi connection through my cable internet. No complaints!
Would like to know what kind of a change this would make though, other then the IP assignment.
Bubbacs
In your Settings / Connections / Connections screen, click "manage existing" and then edit Media Net. First screen is to change name, 2nd screen is to assign wap or isp.
I may be reitterating some information here, but I can tell you as a fact, APN isp.cingular is being reserved for either PDA Connect Unlimited, or a Data Connect plan. If you are any of the PDA Personal plans, access to isp.cingular WILL BE TURNED OFF. There are however, a VERY small number of users that (by shear luck) didn't have isp.cingular turned off when they changed from PDA Connect Unlimited to PDA Personal Max.
My advise is.. if you can't get isp.cingular to work, quit beating your head over it and change your plan to PDA Connect, or get a laptop card plan like I did.
I did a long research thread on this at the at&t forums. I cannot access that site anymore, but maybe someone else could dig up a link.
GWelker62 said:
I may be reitterating some information here, but I can tell you as a fact, APN isp.cingular is being reserved for either PDA Connect Unlimited, or a Data Connect plan. If you are any of the PDA Personal plans, access to isp.cingular WILL BE TURNED OFF. There are however, a VERY small number of users that (by shear luck) didn't have isp.cingular turned off when they changed from PDA Connect Unlimited to PDA Personal Max.
My advise is.. if you can't get isp.cingular to work, quit beating your head over it and change your plan to PDA Connect, or get a laptop card plan like I did.
I did a long research thread on this at the at&t forums. I cannot access that site anymore, but maybe someone else could dig up a link.
Click to expand...
Click to collapse
Is this the correct one G? http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=49092#M49092
OK, isp.cingular and a real ISP has been discussed quite a bit in the past, especially after the new rom came out and the PDA Personal Max data plan. And this is when the trouble started. Many users lost the ability to use a real ISP and some didn't. Some of the fixes posted worked for some and others it didn't.
For me none of the fixes worked but using APN wap.cingular really did what I needed, so I decided to leave it alone. After I decided to upgrade my data plan to Data Connect, I now NEED to use isp.cingular. I cannot log in my company's VPN unless I use APN isp.cingular. So I was bound and determined to make it work. After much reconnaissance I found all the answers right here on the at&t forums. But there are many pieces to the puzzle and they were spread out all over the place. This is going to be an attempt to put the pieces all in one place so the picture will come together.
Update 05/06/07 1:40pm
I put this information together with the assumption of readers having some working knowledge of Windows Mobile 5 and mobile phone usage. If you are a complete NOOB to the whole WM5 thing this information will create more questions than answers. I am far from being a tech guru and if I can half learn this stuff with both my brain cells, then most other people can too. But still..... noobs enter at your own risk.
The Connection Profiles
Now, the new rom sets up the two network connections, "My ISP" and "Media Net". Refer to here Browser/internet Settings There is a link in that page also for configure and use the My ISP profile. For the MEdia Net connections follow the instructions to the letter. Now the My ISP instructions differ from what the new rom sets up automatically. (and if you call CS the data guys will walk you through those settings in that link) The new rom will have the settings for a "real ISP" connection. You will notice, if you follow those instructions it has you change a couple of things. For one it has you change the APN isp.cingular to wap.cingular. Well this won't give you a "real ISP" connection but it will make the My ISP profile work for web browsing. I did a survey of users on who had "My ISP" working and the ones that answered yes, I bet they were still using wap.cingular in the MY ISP profile. So they were/are not getting a real ISP connection. I will quote from that settings page and maybe it will give you clue on it's purpose for using wap.cingular in the My ISP connection profile:
# Additional features such as Wi-f and device based e-mail along with other 3rd party applications may not be compatible with the proxy settings associated with the MEdia Net profile.
# If there are connection issues with e-mail and/or Wi-Fi, configuring and using the My ISP profile as displayed below may resolve connectivity issues.
# Configuring the AT&T 8525 to use My ISP will disable MEdia Net (WAP) web pages when My ISP is used for connectivity. However, regular Internet (HTML) web page browsing will function as normal.
Now the best I can figure, all this does is give two profiles and both use APN wap.cingular, but one uses a proxy server and one doesn't. Which brings me to my next category.
The Proxy Manager cabs
There are two cab files in a folder called Proxy Manager, under your programs menu. These two cab files enable and disable the proxy settings via a registry edit. Now, to me, if I continue to use the MEdia Net connection for all internet use, and utilize these cab files to disable and enable the proxy, I am doing the same thing as above by setting up those two network connections and swapping back and forth from them. Now once you have the My ISP connection profile set up with "real isp" settings it will be no longer necessary to use these cab files. All you have to do is switch back and forth from MEdia Net and My ISP. The MEdia Net profile has the proxy settings built in and you will have to use it if you want access to the Media Net home page.
http://home or http://device.home
Now on to the next topic....
How Do I Get A "Real ISP" To Work?
After it is all said and done, the bottom line is you have to be on the right data plan. From what I have learn't, you have be on a PDA Connect Unlimited, or a Data Connect Unlimited before your account is provisioned to access through isp.cingular. There are a lucky few that when they switched to PDA Personal Max, isp.cingular was not turned off (lucky dogs who's names we shall not speak ). But if it is turned off, CS will NOT turn it back on untill you get on the right data plan and that is the FIRST step. PERIOD Once you do have the right data plan and isp.cingular is "turned on" then it is as simple as setting up My ISP with the "real isp" settings. And thats it! For a recap of those settings refer to RonAnnArbor's post here. You can consider this post a supplement to Ron's.
Something About PIE
Now lets assume you got on the right data plan and isp.cingular is provisioned, and the My ISP profile is set up to use the "real isp" settings but it DOESN'T WORK! You pull up PIE to view a web page and it times out and displays one of those dreaded error messages. Have no fear I found the answer on the at&t forums too. But credit for it should go to the folks over at the XDA site. (man there are some pretty tech savvy folks over there! I wish I was as knowledgeable as those guys) There are some settings in the registry for PIE to auto detect proxy settings. Let's keep it simple and say PIE is "hard coded" in the new rom to always use wap.cingular. So if your connected to isp.cingular, well... you get the picture. That may not be technically accurate, but I think it will be easy for most to understand. (at least for my two brain cells it is ) You will find that everything else that needs access to the internet will work, like email, weather programs, but one will assume they have no internet access if PIE doesn't work. Now lets fix that too, but it will take a registry edit to do it. If you don't know how to do registry editing, I suggest you get a reg editor like Resco or Total Commander and learn how to use it. Now here is what you do. Go to:
HKCU \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings
There will be a Dword labeled "EnableAutoDetect". The default value that detects the proxy is "0", you can change it to a "1" but I recommend deleting the entire entry. Also after a reset go back and make sure it is gone. Sometimes the changes don't stick and you will have to do it again. Another thing to remember is DON'T use the Proxy Manager cabs again. The enable proxy cab will re-write those settings back in there.
Update 8/5/07 8:25pm: I have experienced an anomaly of the "EnableAutoDetect" Dword showing back up in the registry after a soft reset. No proxy cabs were used to cause it. At this time I have not figured out the "why" because it happened only twice. I will edit this update if I find the cause/fix. For right now I thought users should be aware of it and delete it again if necessary.
The Technical Side of APN (Or, what's the difference between isp.cingular and wap.cingular?)
Instead of me spouting off a lot of Geek language and acronyms I don't really know, I am going to link to this page. I have posted this link before and the entire page is some really good infomation. For the information related to the title of this paragraph, scroll down to the section labeled "There are two Cingular access points".
Multimedia Messages
If you want ot send/recieve MMSs, this "real isp" connection is not going to work. For over all web browsing, email, weather updates, ect, the MEdia Net profile should work just fine. I leave mine on MEdia Net most of the time. It is only when I am going to tether, or if a web site is acting flaking (that's a techincal term you know) I will switch over to My ISP. If you are connecting through My ISP when a MMS comes in, it will be a text message directing you to www.viewmymessages.com. (As of this writing this is how it seems to work)
Yep, that should be it. Of course all I can see is my ticket to Banville, but from your copy and paste, that should be the one.
FYI, some of the links from the copy/paste are not functional. But you should see them on the OP on the at&t forum.
The full thread can be found here.
Can anyone point me to a guide to setting up a proxy server on my windows machine at home so that I can use that on my Tilt for free (relatively) internet?
Ive scowered forums, cant find a solid solution. Can you anyone help?
can anyone help?
How exactly would it be "free" internet? You are still going to need a data connection to access the proxy server.
it would be free because I would not be paying internet charges through my cellular provider using their wap server to access the internet, rather I would bundle the cost into my already home internet charges if I set up a home proxy and pointed my phone there.
It still would register as me making a call, but it would not register as me using the internet, hence 'free' internet.
Well technically that's what Opera Mini does. They have their "proxy" servers to feed you web pages. Guess what? AT&T doesn't care. Either way it's still data and I get charged for it (although I do have an unlimited data plan so that point is moot). They don't differentiate between web and any other kind of data access. It's all data and what you're proposing won't change the fact that you need a data plan to do it and will get charged for it.
Lidberg said:
Well technically that's what Opera Mini does. They have their "proxy" servers to feed you web pages. Guess what? AT&T doesn't care. Either way it's still data and I get charged for it (although I do have an unlimited data plan so that point is moot). They don't differentiate between web and any other kind of data access. It's all data and what you're proposing won't change the fact that you need a data plan to do it and will get charged for it.
Click to expand...
Click to collapse
if you redirect your proxy outside of AT&Ts MediaNET you will not get charged
OK, apparently you didn't read anything I typed. Let's look at it another way.
I have a Tilt. I can enable or disable AT&T's proxy server. Does it really matter? NO. Why? Because in both cases data is being transmitted over EDGE or HSDPA. It's bits and bytes traveling over the airwaves. Whether you are directly connected to the internet, using AT&T's proxy or your own proxy, it's all 1's and 0's to them. If they see those 1's and 0's being transmitted from your phone to the internet, you are getting charged for it.
If it was that easy to bypass AT&T's data plan, wouldn't you think everyone would be doing it? I know I would.
Prove me wrong.
In short: As long as you phone has to send a signal to the cellular towers that AT&T owns and operates, you will be charged data access. The Kaiser has built-in wi-fi, you can get around [most] of the associated issues with WAP by using that when you're at home; however, some programs require a WAP connection as opposed to a standard wi-fi connection, which would require you to send data over the air to AT&T's towers. It doesn't matter where the proxy itself is located, so long as you have to send data to the cellular towers, you're SOL.
mjhill said:
In short: As long as you phone has to send a signal to the cellular towers that AT&T owns and operates, you will be charged data access. The Kaiser has built-in wi-fi, you can get around [most] of the associated issues with WAP by using that when you're at home; however, some programs require a WAP connection as opposed to a standard wi-fi connection, which would require you to send data over the air to AT&T's towers. It doesn't matter where the proxy itself is located, so long as you have to send data to the cellular towers, you're SOL.
Click to expand...
Click to collapse
Good explanation
You need to turn off or disable the GPRS connection if you want to use WiFi without paying AT&T connection charges. There used to be a great program over at MoDaCo called NoData which when you ran it showed you the connections you had and let you disable the ones you wanted to have off. Then you could use Wifi without starting a GPRS connection. The program still exists, do a search for it hear or google it at MoDaCo. Only thing, I seem to recall that the creator of the program said it was only for WM5. I've seen people say that it works in WM6 but haven't tried it myself.
Short of that you could just go into DataComm and tap on the Data connection icon, to turn if off as you tap WLan to turn it on. Of course that will disable your data connection and push e-mail and you'll have to remember to start it up again afterwards if you want to get your push e-mail.
jspetrino said:
Can anyone point me to a guide to setting up a proxy server on my windows machine at home so that I can use that on my Tilt for free (relatively) internet?
Ive scowered forums, cant find a solid solution. Can you anyone help?
Click to expand...
Click to collapse
Did you happen to be a Verizon customer before you moved to ATT? Verizon tracks data usage through their proxy, so yes, you COULD get free internet with them. I did it all the time, and i miss it. ATT is a bit smarter about it. Instead of forcing you to pay for an unlimited plan or nothing... ATT lets you get on the internet whenever you want... they just charge you for it.
In short, AFAIK, there is no way to get free internet through ATTs network like i used to with verizon.
I had a similar question, which got no replies....
T-mobile puts you through it's proxies, so that pictures etc are compressed, which is a bit pants. That's one reason why you might want to do as described in the OP.
http://forum.xda-developers.com/showthread.php?t=345029
MHC48 said:
You need to turn off or disable the GPRS connection if you want to use WiFi without paying AT&T connection charges.
Click to expand...
Click to collapse
This simply isn't true. If you enable WiFi and you're passing traffic through GPRS, then you don't have your WiFi network configured correctly.
Go to Settings-Connections-WiFi and change the pull down for your adapter from "Work" to "The Internet. Associate with AP. Surf to your heart's content without using the cellular network.
You can shut off the phone connection if you like, but there's no need to do so.
Edit: Just for giggles, I fired up my WiFi configured as above and grabbed a 3MB file directly on the phone. GPRS Monitor recorded zero traffic increase.
while(!(linux)){wm} said:
Did you happen to be a Verizon customer before you moved to ATT? Verizon tracks data usage through their proxy, so yes, you COULD get free internet with them. I did it all the time, and i miss it. ATT is a bit smarter about it. Instead of forcing you to pay for an unlimited plan or nothing... ATT lets you get on the internet whenever you want... they just charge you for it.
In short, AFAIK, there is no way to get free internet through ATTs network like i used to with verizon.
Click to expand...
Click to collapse
yes I used to be Verizon never go back to them again! I used to use a quick fix on one of my LG phones redirecting to a proxy and i got free internet that way.
When i use WLAN the 3G/GSM connection is lost after a few minutes and i have to reboot the phone to get it back. Does anybody know why this might be? Could it be the Radio?
I think its turning it off because your connecting to the internet through the wifi, when you disable wifi it should re-enable the 3g connection, but if it doesnt you can turn on the data connection...
thats what it sounds like is going on from your post. When I turn on wifi it will drop the data connection but has always reconnected to it once I disable wifi or I go outside of my wifi's range and something try's to connect to the net...
Yes, it is logical, you could not have opened two types of connection concurrently. One type closed another one.
ive had the same problem, when i connect to wi-fi i lose the data connection and it doesnt let me browse until i turn wi-fi off...i dont understand the point of wi-fi if u cant browse with the speed since the data connection is lost?
Thanks men! By turning on the data connection after i used wifi it reconnected!
timace said:
ive had the same problem, when i connect to wi-fi i lose the data connection and it doesnt let me browse until i turn wi-fi off...i dont understand the point of wi-fi if u cant browse with the speed since the data connection is lost?
Click to expand...
Click to collapse
What Wifi allows you to do us connect wirelessly to another connection, at home its my DSL, which is much faster than the edge network, and if I did not have an unlimited data plan wouldnt add to my phone bill. In that way its very usefull. Seeing how its faster and available at home or in places where your cell signal might not be strong or available you can use it to get online.
But you need to tell it your no longer using wifi for it to reconnect through the network to deliver data to you again.
10332007 said:
What Wifi allows you to do us connect wirelessly to another connection, at home its my DSL, which is much faster than the edge network, and if I did not have an unlimited data plan wouldnt add to my phone bill. In that way its very usefull. Seeing how its faster and available at home or in places where your cell signal might not be strong or available you can use it to get online.
But you need to tell it your no longer using wifi for it to reconnect through the network to deliver data to you again.
Click to expand...
Click to collapse
ok so when it comes to wi-fi im a big newbie, i have a tmo wing and have flashed (upgraded) rom...i also have dsl at home how is it i can connect and access this...when i search for wi-fi it usually only picks up my neighbors connections never my own...?
If you have a wifi router or your modem has a build in wifi option you go into your modem to set it up. Most modems / routers come with it broadcasting the SSID so you should see something (usually the default is the name of the manufacturer)
If you have your paperwork you can open your web browser and type in the address to open the internal OS and make changes as you see fit. For example mine is a linksys and its default address was http://192.168.1.1, most routers used to default to that but since a lot of modems are coming out with build in os and firewalls they have that IP so routers can be changed like mine. Once in the OS you can set up your pw so no one else can play with your settings
Navigate to the Wireless section and there should be a bunch of settings. I renamed my WiFi name to match my home network, and disabled the SSID broadcast. Then changed the chanel for some of my other devices, if you dont have anything that requires this leave it alone. Then enable WEP or other protection, 128 bit wep is pretty decent and anyone hacking through it will probably be disappointed with your lack of juicy goods.
Once you have the SSID and the Key encription you go to your phone and mirror the information into the WiFi settings. The web will be a 26 or so string of letters / numbers that will equal the password you set. These must be typed in perfectly or it will not work, took me 6 or so tries to get it typed in correctly but once its in you wont need to do it again unless you reset the phone or change the network settings.
If all that goes through open IE on the phone and hit up google or something, if it loads your online.
Thats a jumbled and messy tutorial, I can fix it to be more user friendly if you need me to do it, but with you not seeing any SSID but your neighbors your wifi is either non existant or disabled...
10332007 said:
If you have a wifi router or your modem has a build in wifi option you go into your modem to set it up. Most modems / routers come with it broadcasting the SSID so you should see something (usually the default is the name of the manufacturer)
If you have your paperwork you can open your web browser and type in the address to open the internal OS and make changes as you see fit. For example mine is a linksys and its default address was http://192.168.1.1, most routers used to default to that but since a lot of modems are coming out with build in os and firewalls they have that IP so routers can be changed like mine. Once in the OS you can set up your pw so no one else can play with your settings
Navigate to the Wireless section and there should be a bunch of settings. I renamed my WiFi name to match my home network, and disabled the SSID broadcast. Then changed the chanel for some of my other devices, if you dont have anything that requires this leave it alone. Then enable WEP or other protection, 128 bit wep is pretty decent and anyone hacking through it will probably be disappointed with your lack of juicy goods.
Once you have the SSID and the Key encription you go to your phone and mirror the information into the WiFi settings. The web will be a 26 or so string of letters / numbers that will equal the password you set. These must be typed in perfectly or it will not work, took me 6 or so tries to get it typed in correctly but once its in you wont need to do it again unless you reset the phone or change the network settings.
If all that goes through open IE on the phone and hit up google or something, if it loads your online.
Thats a jumbled and messy tutorial, I can fix it to be more user friendly if you need me to do it, but with you not seeing any SSID but your neighbors your wifi is either non existant or disabled...
Click to expand...
Click to collapse
thanks for the quick reply, ill give it a try...might need the more user friendly version lol sorry
Its no problem, the biggest thing will be weather or not you have a wifi router or modem. Then depending on the brand the IP you have to type in to log into the modem. Each router / modem will have paperwork with it that tells you how to do it, some are different but thankfully most are the same.
The un is usually blank and the pw is usually admin, sometimes now they dont even put one unless you specify it. Once your in the OS its pretty self explanitory, there are lots of things to not mess with, but in the wifi area you can look over my post and figure most of it out,
if you get hung up on somethin just post what it is and ill see what I can do
I’m here on the coast at Keesler Air Force base. There is no internet to speak of and I do not want to spend roughly $1,400 to obtain it through a Cell provider for my laptop. I setup the Internet Sharing on my TILT and it works somewhat. Well, I lied. It stays “connected” however the damn thing peers off and the laptop continuously loses connectivity.
I only use Skype and sometimes webmail with the Internet Sharing and it cannot handle it. Every minute, sometimes up to six minutes, Skype videocalls and standard webcalls are dropped and I test the internet connection to see that it’s timing out for another minute or so and then it magically reappears.
I closed all applications and the antivirus crap to ensure that there was no extra throughput bandwidth. Anyway, I’m about to lose my damn mind here because I cannot stay in contact with my fiancée who’s on the other side of the globe right now.
According to the phone I’m only getting the Edge network and that makes sense as there are not 3G towers nearby. The signal continually shifts from two bars to four bars. I have used the Kraiser Tweak to enable HDSPA but that service is not being picked up.
Any ideas as to how I can keep the connectivity from dropping between the cellphone and the laptop? I assume that’s the issue as the phone stays “Status: connected” within the Internet Sharing application.
If it matters, I can only use the "Media Net" option under Network Connections. Media Net utilizes the wap.cingular access point.
I have tried to use the "ATT ISP GPRS" option but it continually loops through attempts to connect to the internet. Eventually it gives up without any success. The ATT ISP GPRS uses the isp.cingular access point.
Please any assistance would be most appreciated. This United States Airman is about to lose is frigging mind over the fact that he can’t communicate with anyone any longer. Ugh!!!
Thanks to any thoughts and advice to better my situation...
Oh and for the record, if it isn't understood being a Tilt, my provider is ATT.
HSDPA will not work without 3G service. MEdia Net is the best way to tether, I use it all the time. Make sure the proxy option is unchecked, or you will get very poor speeds and high latency.
What do you mean by HSDPA? Also, I tried with MEDIANET but I continually lost connectivity. However, ATT ISP GPRS seems just as bad if not worse. Any thoughts on something I can do to boost connectivity? I don't know about the proxy but where I looked one is NOT enabled.
I enabled IP Compression and Software Compression for ATT ISP GPRS and it hasn't seem to have any affect...
Thanks a lot.
crypted said:
What do you mean by HSDPA? Also, I tried with MEDIANET but I continually lost connectivity. However, ATT ISP GPRS seems just as bad if not worse. Any thoughts on something I can do to boost connectivity? I don't know about the proxy but where I looked one is NOT enabled.
I enabled IP Compression and Software Compression for ATT ISP GPRS and it hasn't seem to have any affect...
Thanks a lot.
Click to expand...
Click to collapse
You mentioned HSDPA, so that's why I said it. As for ATT ISP GPRS, you do not want to use that unless you have a modem tethering option on your AT&T account. If you go under MEdia Net settings, and then check the Proxy tab, make sure the proxy option is unchecked.
Allrighty, I've confirmed that the Proxy is not enabled. The only thing on the Proxy option section that is enabled is the first option where it says this network connects to the internet.
Any ideas on stabilizing internet on a 2 - 3 bar Edge network? If I do more than one task (more than one website OR a website and Skype) the internet gets lost quite easily...
Thanks a lot man.
Wow when I was over that way I dont recall have any issues with ATT and internet. When I access the net while tethered I use the ATT program that connects via laptop... Its not the internet sharing program.... Its called ATT Communication Manager... It may read as being tethered so if you dont have tethering on your plan then I dont know if id use it. If you have tethering it works great for me. Heres a link for the download...
http://www.wireless.att.com/businesssupport/setupOTW.do?phone=ATTTilt
You might want to try flashing another rom and radio. I remember I had an issue similar to this with my hermes from ATT. Swapping to another radio can definitely boost your signal quality. If your signal drops too low even for a second, it can cause major latency issues on the edge network( which WILL cause skype to dop a call ) . I recommend trying a ROM that already has a radio packaged in with it to save you the trouble of having to match a radio to a rom. Also look for one that has the network configuration cab built in so it can automatically set up your Connection settings for you.
Hope this helps
Allrighty... I don't have much time to research ROMS or RADIOS unfortunately. Any suggestions on where to find them, or what I might use? I'd almost prefer just to change RADIOS so long as I can find the original RADIO to replace any changes back to what I was using...
Currently, I have:
ROM 1.62.502.0
RADIO 1.27.14.09
Any help to further this US Airman along would be appreciated.
Thanks.
So I'm in the army right now, which means there's a TV but no WiFi available.
I did think of just setting up a Hotspot with another phone but it gets pretty annoying having to have 2 people at all time.
So I went digging in the Internet and found someone at a random forum (can't find it now for credit..), that said that If you set up the Hotspot in your own phone and configure it with another one you don't need the other one around anymore - being the Hotspot works as being connected to it.
Now I'm pretty sure there shouldn't be any reason I couldn't set it up on my own phone (the hotspot), except the Google home app just demands I connect to the WiFi network, which I can't do because you can't connect to yourself sadly.
I think if someone made some changes to the Google home app, or made an alternative set up app it could work. I have no idea how to code an app, so I came here ?
tl:dr I Want an app that does the same as the home app for setting chromecast up, but without checking if I'm connected to a WiFi network. (I think)
I'm guessing that you have no WiFi but you do have a hard line internet connection?
The only issue with what I'm going to suggest is that base rules may prohibit creating a WiFi access point on any of their hardline connections.
But the best solution for you is to buy a Portable Router (see posts here about using CCast in a Hotel).
It's a small box about the size of a DC transformer that plugs into the outlet and also any Network to create a small footprint WiFi access point.
I suggest looking for a model that also has Repeater mode that allows it to connect to another WiFi access point to create your own private network as opposed to a hard line.
It is probably the best way to use a CCast in places where WiFi is not available without having to play with Phone Hotspot which doesn't always work due to the fact the hotspot can't control the CCast in that mode.
The other Option that is most likely to be allowed is to add a WiFi puck to your Mobile account. Then there would be no potential compromising of the Military network (which is why they might not allow the Portable Router to be used) and you would no longer need two phones to run the CCast.
CCast definitely needs Internet so that Puck might be the safest and best way forward for you.
As for what you read...The issue is that if the Phone goes out of range it stops working.
Asphyx said:
I'm guessing that you have no WiFi but you do have a hard line internet connection?
The only issue with what I'm going to suggest is that base rules may prohibit creating a WiFi access point on any of their hardline connections.
But the best solution for you is to buy a Portable Router (see posts here about using CCast in a Hotel).
It's a small box about the size of a DC transformer that plugs into the outlet and also any Network to create a small footprint WiFi access point.
I suggest looking for a model that also has Repeater mode that allows it to connect to another WiFi access point to create your own private network as opposed to a hard line.
It is probably the best way to use a CCast in places where WiFi is not available without having to play with Phone Hotspot which doesn't always work due to the fact the hotspot can't control the CCast in that mode.
The other Option that is most likely to be allowed is to add a WiFi puck to your Mobile account. Then there would be no potential compromising of the Military network (which is why they might not allow the Portable Router to be used) and you would no longer need two phones to run the CCast.
CCast definitely needs Internet so that Puck might be the safest and best way forward for you.
As for what you read...The issue is that if the Phone goes out of range it stops working.
Click to expand...
Click to collapse
Actually, no Internet at all, just mobile data, but since I got 15 gigs it's OK for me to use it.
exeLz said:
Actually, no Internet at all, just mobile data, but since I got 15 gigs it's OK for me to use it.
Click to expand...
Click to collapse
Then I suggest getting the WiFi puck and adding it to your data account.
Asphyx said:
Then I suggest getting the WiFi puck and adding it to your data account.
Click to expand...
Click to collapse
To be honest, it is a good idea but my I was mainly wondering if I could solve it via software which is both easier obviously and also I just wanted to know if it's actually possible since I thought of it and I wanna know if I got it right
exeLz said:
To be honest, it is a good idea but my I was mainly wondering if I could solve it via software which is both easier obviously and also I just wanted to know if it's actually possible since I thought of it and I wanna know if I got it right
Click to expand...
Click to collapse
Not really...All the hacks and such that people try simply don't work well due to the fact that the Phone can't really connect to the same subnet as the Hotspot. When you go into Hotspot mode you can't also connect to that hotspot internally because WiFi is no longer available to the phone.
Asphyx said:
Not really...All the hacks and such that people try simply don't work well due to the fact that the Phone can't really connect to the same subnet as the Hotspot. When you go into Hotspot mode you can't also connect to that hotspot internally because WiFi is no longer available to the phone.
Click to expand...
Click to collapse
That's why i suggested tempering with the app so it treats being a Hotspot as if u were with WiFi on connected to one.
Basically take off the check for being connected to WiFi.
exeLz said:
That's why i suggested tempering with the app so it treats being a Hotspot as if u were with WiFi on connected to one.
Basically take off the check for being connected to WiFi.
Click to expand...
Click to collapse
The issue isn't the app...It's the fact that the WiFi in your phone can only do one thing at a time....BE an Access Point or CONNECT to an access point.
It can't connect to itself as the radio can't do both things at once.
So when you go into hotspot there is no way to get on the same subnet as the hotspot with the phone.
Because there is no network adapter available to connect to it. It is too busy being an access point.
Basically going into hotspot turns the Phone into a router. A router the phone has no way to connect to. So you either need another device to connect to that phone router or find some other router with internet.
Which is what the Cellular Puck will give you.
Asphyx said:
The issue isn't the app...It's the fact that the WiFi in your phone can only do one thing at a time....BE an Access Point or CONNECT to an access point.
It can't connect to itself as the radio can't do both things at once.
So when you go into hotspot there is no way to get on the same subnet as the hotspot with the phone.
Because there is no network adapter available to connect to it. It is too busy being an access point.
Basically going into hotspot turns the Phone into a router. A router the phone has no way to connect to. So you either need another device to connect to that phone router or find some other router with internet.
Which is what the Cellular Puck will give you.
Click to expand...
Click to collapse
Like I said, once the setup is done, being the Hotspot is just like being connected to is. The app still doesn't recognize you're connected but if you're on the web the chromecast icon does pop up when needed, all the third party apps do recognize you as being connected.
All you managed to do with Google Home (which can't be edited by anyone but Google)on the second phone is connect your CCast to the Phone Hotspot for it's Internet. There is no way to avoid that setup....HOWEVER...
As long as you don't set it up to connect to some other Hotspot there is no need to run Home again, Just turn on Hotspot and it should reconnect.
It will even remember the password,
Accidental post
Asphyx said:
All you managed to do with Google Home (which can't be edited by anyone but Google)on the second phone is connect your CCast to the Phone Hotspot for it's Internet. There is no way to avoid that setup....HOWEVER...
As long as you don't set it up to connect to some other Hotspot there is no need to run Home again, Just turn on Hotspot and it should reconnect.
It will even remember the password,
Click to expand...
Click to collapse
Yea I know, but sometimes friends take it or something and it's a pain in the ass to explain everything, and even when I do it means I gotta reconnect at my end again which is annoying just thought someone could maybe find a solution that sounded really simple for me, guess not, too bad..
Thanks anyway!
Well trying to recode Home is a dead end....Android wouldn't even let you install it!
You guys should just chip in and buy the puck.
It will even let you use Tablets and Laptops as well as simplify the CCast use.
I know this is an older post; not sure if you are still interested. I read all the replies and not sure what to make of it as far as if anyone had a working solution or not. No disrespect to anyone, but I couldn't tell for sure so I'm posting a link to my solution which does work. The two important steps are included. One is using " other wifi" in the drop down list when searching for your hotspot. The second is enabling GUEST MODE.
https://forum.xda-developers.com/android/help/how-to-cast-screen-android-phone-to-t4032653
I’m trying something similar with a Chromecast 3rd gen and iPhone 5S (iOS 12). Main issue seems to be guest mode doesn’t work at all on any apps, and pretty much every solution i’ve seen to this results in guest mode being used for the eventual casting. If you have android or iOS 13 then ymmv.
The only solution i’ve found are workarounds, the obvious being
1) don’t buy a chromecast (it’s not much of a solution but hey it’s $30).
2) use a secondary device to cast.
3) use a tethered travel router, and this can be done with only a phone and mobile data for internet, but there’s a catch:
First i’d Recommend any router by GLi.net (cheapest “mango” router is about $20) as they support iOS and android and both WiFi and usb tethering.
Also, i’ve Tried using a WiFi hotspot on the phone, and it’s the same issue - no connection to the chromecast regardless of how. However... iPhones will allow you to create a hotspot using *only* cables usb tethering, so if you set the router up to *only* accept internet via cables tether (turn off WiFi/repeater tethering), then you can have both the chromecast and iPhone connect to the routers WiFi, whilst providing net access to the router (and WiFi network) from the same iphone’s mobile data via usb. Simple howoto:
Important: Turn OFF WiFi on the phone, and turn off hotspot.
Connect phone to router via usb, accept trust settings.
Turn on personal hotspot, you’ll get a message asking whether to use WiFi or just usb (andbluetooth if it’s also turned on). Select just usb/Bluetooth.
Wait until blue connection bar shows on phone (if not, make sure routers setup properly to gain net via usb tethering).
Now, turn on WiFi on the phone, and connect to routers WiFi.
Setup chromecast as normal, selecting to connect to routers WiFi too.
Note turning hotspot off and on again whilst WiFi is running will start a hotspot on WiFi and disconnect you from router WiFi, so you’ll always have to go through process of turning WiFi off, turn hotspot on, turn WiFi on.
So you can do this with the right router and a usb connection to phone. Or maybe android and working guest mode. Otheriwse, ...fire tv anyone?