Working CV VIDEO on Custom ROMS - Touch Pro2, Tilt 2 Windows Mobile ROM Development

I think theres a need for this thread. Those of us who flash these amazing roms sometimes lose the original functionality of our stock rom like AT&T cingular video feature. I opened this thread to get the info needed to get it restored back on our customized devices. Any contributors welcome to solve this little dilemna. So Bring It On!!
PS.
Yes Im aware of Sheps thread in Raphael forum and although its similar...its not the same.
WHAT WE NEED:
Original opera.ini from tilt II stock rom
Location of where to replace it..
Device Id info which I'll post shortly...
Dont know what else..
Im using opera 9.7 35523 and 10 beta2u

Try these cabs to install an original opera.ini. they are a quick way to enable and disable the proxy but the enable one will give you the opera.ini that you want.

Would be nice to get the AT&T cingular video feature on custom roms.
About the only thing I miss from stock rom ..........

wpbear said:
Try these cabs to install an original opera.ini. they are a quick way to enable and disable the proxy but the enable one will give you the opera.ini that you want.
Click to expand...
Click to collapse
so pretty much I just install those .cabs, install the CV software, enable the proxy and CV will work?

FactorVIII said:
so pretty much I just install those .cabs, install the CV software, enable the proxy and CV will work?
Click to expand...
Click to collapse
I dont know for sure since I use e2 rom which is cooked in. but I would say if you have opera and htc streaming media then if you install this cab, then go to startmenu and run enable opera proxy then it should work by going to CV website from opera. The location of your opera install may casue a problem, this is set up for \\windows\opera9 install.

whats the user agent for the stock at&t tilt 2 rom?
I remember with my kaiser and raphael, all we had to do to get cingular video working on a custom rom was set the user agent to what at&t has set for its devices, enable the proxy and it worked.
I went to the at&t store and tried going to http://whatsmyuseragent.com/ but it wouldn't load (will load on my device with custom rom)

Here are some cabs if you didn't have them. I think they are from the Fuze days with Da-G kitchen roms

Here is what you'll need
Here is what you will need:
1) Opera that points to the ATT Proxies. This will depend on which version of Opera that the custom ROM uses. Opera 9.5 uses opera.ini files while 9.7 uses reg entries. I have attached cabs to toggle both 9.5 and 9.7 below.
2) Correct identification of device by the ATT Proxies. For this add the following reg entries to your device:
Code:
;Identification
[HKEY_LOCAL_MACHINE\Ident]
"Name"="HTC-ST7377"
[HKEY_LOCAL_MACHINE\Ident]
"Desc"=""
[HKEY_CURRENT_USER\Software\Microsoft\Bluetooth\Settings]
"LocalName"="HTC-ST7377"
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\Captparam\ExifInfo]
"Make"="HTC-ST7377"
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\Captparam\ExifInfo]
"Model"="HTC-ST7377"
[HKEY_LOCAL_MACHINE\Software\Opera\Prefs\User Prefs]
"UAProf URL"="http://www.htcmms.com.tw/att/ST7377-1.0.xml"
[HKEY_LOCAL_MACHINE\Software\Opera\Prefs\User Prefs]
"Custom User-Agent"="HTC-ST7377/%ROM_VERSION% Opera/9.70 (Windows NT 5.1; U; en)"
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC-ST7377/%ROM_VERSION% Mozilla/4.0"
You will also need the shortcut for launching the Mobile Video which should look something like this:
Code:
21#"\Windows\OperaL.exe" http://cingularvideo.cingular.com ?\Windows\ATT_Link.dll,-156
Hope that helps.

Here is the link to what NotatreoFan had posted for AT&T extra's.
http://forum.xda-developers.com/showpost.php?p=2895457&postcount=4

eras2r said:
Here is what you will need:
1) Opera that points to the ATT Proxies. This will depend on which version of Opera that the custom ROM uses. Opera 9.5 uses opera.ini files while 9.7 uses reg entries. I have attached cabs to toggle both 9.5 and 9.7 below.
2) Correct identification of device by the ATT Proxies. For this add the following reg entries to your device:
Code:
;Identification
[HKEY_LOCAL_MACHINE\Ident]
"Name"="HTC-ST7377"
[HKEY_LOCAL_MACHINE\Ident]
"Desc"=""
[HKEY_CURRENT_USER\Software\Microsoft\Bluetooth\Settings]
"LocalName"="HTC-ST7377"
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\Captparam\ExifInfo]
"Make"="HTC-ST7377"
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\Captparam\ExifInfo]
"Model"="HTC-ST7377"
[HKEY_LOCAL_MACHINE\Software\Opera\Prefs\User Prefs]
"UAProf URL"="http://www.htcmms.com.tw/att/ST7377-1.0.xml"
[HKEY_LOCAL_MACHINE\Software\Opera\Prefs\User Prefs]
"Custom User-Agent"="HTC-ST7377/%ROM_VERSION% Opera/9.70 (Windows NT 5.1; U; en)"
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC-ST7377/%ROM_VERSION% Mozilla/4.0"
You will also need the shortcut for launching the Mobile Video which should look something like this:
Code:
21#"\Windows\OperaL.exe" http://cingularvideo.cingular.com ?\Windows\ATT_Link.dll,-156
Hope that helps.
Click to expand...
Click to collapse
Can anyone confirm this works? Just did all the reg-edits, doing a soft-reset now. I just don't see how changing the camera's EXIF data would effect the internet browser....
i think tomorrow i'm gonna flash the stock rom and pull everything out of it needed if this doesn't work.
With the original tilt and the fuze, all you needed to do was change the User Agent to that of the Fuze, or Tilt and enable the proxy and it worked but i've haven't had any luck with custom roms on the tilt2 :/
-UPDATE-
IT WORKS!!! thank you so much! i remember when i first got my tilt i tried for about an entire day to no avail!
Simply did the reg-edits, soft-reset, installed the opera 97 proxy enable cab and voila!
adding this to the wiki! I love this forum!

Related

US TMo MDA ROM Info

Just looked at the MDA and the ROM is 1.8.x.x WWE but radio is 01.09.xx. Also looked at the extended ROM and the attachment shows what was included:
[/img]
Can you post the extended rom to the FTP site.
It looks as though they have the updated Comm Manager template. The one that will allow you to turn the phone on/off. This is missing fromt the QTEK...
Yes, the COMM MGR is the one which is more useful than the version came with the 9100.
I have the qtek 9100 running on 2.8 rom in the US with TMo. I use the unlimited vpn account and the unlimited msging. I have never been able to get mms to work, are any of these ext rom cab files ones that would set that up? if so, can they be uploaded here?
I configured my 9100 from scratch and it works (have unlimited but I use wap.voicestream.com AP), I also have the complete as-shipped US extended ROM here (approx 6M), but I don;t have a FTP to upload to, if someone wants to host it, just let me know.
I am using the vpn AP. Does it matter? Is MMS only working with the wap AP? if so, will I be able to use the vpn dial-up through it?
I can host the files if they cannot be posted on this site. I will send a PM with my address.
Files were zipped & sent, good luck. I believe the MMS conduit works off the WAP APN, you may want to add the WAP APN under connections and check auto detect and see if that helps.
Where is this zip at the ftp, can't find it yet
Click here to download
Jonathan, did you find whatyou needed? If so, is it helping?
That link doesnt work. Can someone post the ROM to the normal ROM folders at ftp://xda-developers.com/Uploads/HTC_Wizard/Roms/Tmobile/
so everyone can get it?
thanks
cannot download..
Ok I am neb to this site .. But I have been on HOFO fince 03. . I am trying to download the Tmo rom and I cant for some reason,, it states that windows cannot access the folder and that i may not have permission to dl it.. am I doing something wrong...
The T-Mobile US extended rom can be found here
ftp://[email protected]/Uploads/TMo-US-Ext_ROM.zip
It was uploaded just bad link.
bad
that is also a bad link is says acess denied
Try this link
Signed_TMO_USA_CommManager_0409_v101.sa.CAB
VS.
On the left the new one, one the right the old one.
Not bad at all, already added it to my custom extended rom
Does anyone have the entire T-Mobile US ROM+Ext ROM? I've got a Cingular 8125 that I'm using with a T-mobile SIM and I'd like to just convert the whole thing as if it were the MDA.
I have figured out what a few of the files are for (I think) and someone else indicated a willingness to help investigate, but I thought the community might already know what many of these updates are for. Here is my stab at it and let me know if you know more or better than I.
UXC_WWE.cab - ring tones?
CAB-Customization-PictureSize2Default.CAB - related to camera app?
CAB-Customization-Wizard(AKU1.0)-TMOUSA-01-09-051215.CAB - AKU updates?
cusTSK.exe - T-Mobile custom Today screen
MT-MMS-WI19-051213-1.CAB
PhoneLight_Skin_TMO_US_1124.CAB - Phone skin I assume?
PhoneLight_TMO_OverBMP_1124.CAB - Another skin update?
Shorcut-MMS1-CV-VOICE-TMO-US-10Nov05.CAB - CyberVoice Dialer install
Signed_CAB-Customization-WapPush-TMOUSA-Wizard-Aug10.CAB - WAP settings?
Signed_2005_11_24_TOHTC_wispa_PPC_Release_v1_0_1_1.CAB - ???
Signed_CAB-Customization-SuspendResume-TMOUSA-Wizard-Aug10.CAB - ????
Signed_DiscoButton8.sa.CAB - ???
Signed_GPRS-stall_Wizard_TMOUS_DEC20.CAB - GPRS installation settings?
Signed_Move_IM_Link.sa.CAB - change IM links?
Signed_OZPocketPC.Cab - OZ IM client
Signed_TMO_USA_CommManager_0409_v101.sa.CAB - updated COMM manager
Signed_tmobile_email_notification_2005PPC_NET_rom_12202005.CAB - ???
Signed_TMOUS_Favorites_1810102.sa.CAB - PIE favorites
Signed_TMOUS_MCCMNC.sa.CAB - ???
Signed_TMOUSA_Connection_Wiz10810101.sa.CAB - GPRS/Edge connection settings?
Signed_TMOUSA_FixAppButton_VoiceSpeedDial.sa.CAB - set voice dialer button
Signed_TMOUSA_Setting_pIE_Wiz10810102.sa.CAB - change IE settings?
Signed_Update_RingTone_1810102.sa.CAB - ring tones?
Signed_UXC_HotFix_Wiz10510101.sa.CAB - AKU 1.0 update?
Signed_Version.sa.CAB - ?
Signed_WIZ_RILEnableEONS_2.sa.CAB - ???
SmartDialing_enable_0915_signed.CAB - same smart dialing as in standard Wizard
TMOUS_Camera_Profile_reg_0908_signed.CAB - something to do with the camera... what?
how do you install the extended rom?
I have never done this before only a full rom install and radio rom install. Im a neb so any help would be great. Thanks!
The Java Virtual machine is missing from the T-Mobile load..... that bites - no google local!

"Mr. Clean" AKU 2.3 ROM available - No Carrier Cus

After seeing more than a few requests on the board, I figured it was high time to cook up a clean ROM for everyone to use. The purpose in creating it was two-fold. One, I wanted to have a core ROM that wasn't littered with carrier customizations and two I wanted to create a solid base for others to play with.
Cooking up your own ROM can be scary the first time you do it, it's a lot safer to simply mess with tweaking the Extended ROM and leaving the OS and bootloader alone. The Mr. Clean ROM only loads four items (Disable Cert, MMS Folder Creation, MIDlet Java Session Fix and Total Commander) so it's great to use as a base to build on or simply to flash over completely.
As for the ROM itself, I used the core OS from the latest T-Mobile beta ROM (AKU 2.3) and the Radio ROM from the latest Cingular beta ROM (2.25). As many have already noticed, though the two carrier releases share the same version number for their respective Radio ROMs, they are not idential files. The Cingular Radio ROM appears to much better at keeping a signal.
--------------------------
Exact version numbers are as follows:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS: 2.24.10.1
Within the OS, Device Information reports:
ROM version: 2.24.10.1 WWE
ROM date: 4/17/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM version: 2.24a Mr. Clean
And the OS build is reported as:
OS 5.1.195 (Build 14955.2.3.0)
--------------------------
I've been testing it out for a few hours now and the build seems to be solid. Boot time is very quick and it appears to acquire a network signal almost immediately.
A2DP is supported natively in the ROM.
Any questions, please post here in the thread. Otherwise I hope this helps all the non-Cingular/T-Mobile users as well as the budding ROM chefs out there!
The ROM is currently on the FTP at:
ftp://xda:[email protected]/Wizard/Roms/MrClean_RUU_WIZARD_224a_AKU23_WWE.zip
Note: 2.24a was uploaded on 6/17/2006 and contains the Java Session fix. Please DISREGARD v2.24 and don't bother using it. If an FTP admin is reading this, please feel free to DELETE MrClean_RUU_WIZARD_224_AKU23_WWE.zip from the safe area. This file supersedes it.
Edit: 4/7/06 v2.24 deleted from safe area (eDsuB)
sweet... This is exactly what I need... Please do keep this going for future ROM releases.
Which Splash screen did you use? I tried to put in my own with an exe I found in another thread, but it doesn't work on this ROM.
ikkoku said:
sweet... This is exactly what I need... Please do keep this going for future ROM releases.
Which Splash screen did you use? I tried to put in my own with an exe I found in another thread, but it doesn't work on this ROM.
Click to expand...
Click to collapse
perhaps this can help;
http://forum.xda-developers.com/viewtopic.php?p=301221#301221
aalright now after i install this rom where can i get the proper t-mobile settings? ive looked around and ive seen it once but now i cant find it
ahhh. man. i just upgraded to the tmobile 2.24 last nite becaue i couldnt wait anymore, and now you have this. lol. i would rather a core rom though so i still mite get this
i just install this rom and installed all the cabs of the t-mobile ext rom and well theres one thing the comm manager isnt the same.
it has the same settings int he settings menu like the usb to pc thing just the comm manager is different is there any way to change the comm manager to the new layout.
This is great, thanks.
So what exactly do you do for the MMS folder creation? When I have updated in the past and not run the extended ROM stuff, I didn't have an MMS account. So I had to make a registry change to enable MMS account creation, then create it in the messaging application. Is that basically what you do?
ikkoku - Glad you like it. I'll try to keep it going as new ROM releases ship out. To answer your question about the splash, it's a custom screen.
jacob-mda - Check out the thread listing the functions of the T-Mobile 2.24 Extended ROM. I've listed out the known components in there. If you just want the GPRS/WAP and MMS settings you should be good to go if you grab the following CABs from the T-Mobile ExtROM and install them:
MP_Customization_TMOUSA_Wizard(AKU2.x)_060510.CAB
P_Generic_Conn_Settings.CAB
gizm0luvsu - I'm not sure what you mean when you say the Comm Manager isn't the same. If you're talking about the difference between the old 1.x ROMs and the new, you'll note that the Comm Manager now has seven items in it instead of four. It's going to look a bit different just because of the new functions.
jacob-mda said:
aalright now after i install this rom where can i get the proper t-mobile settings? ive looked around and ive seen it once but now i cant find it
Click to expand...
Click to collapse
Here, this will only install the T-Mobile GPRS/MMS/IE/OTA settings. (this was made by xelencin on a previous ROM)
Chriš said:
This is great, thanks.
So what exactly do you do for the MMS folder creation? When I have updated in the past and not run the extended ROM stuff, I didn't have an MMS account. So I had to make a registry change to enable MMS account creation, then create it in the messaging application. Is that basically what you do?
Click to expand...
Click to collapse
Basically. When trying to figure out how to do it, I was pointed to one of the default carrier CABs that does just that -- creates the MMS folder and adds the Java link. So I just used that CAB to do the work.
what i mean is that i know its supposed to look different. when i was using 2.21 it had 5-6 things in it now when i upgraded to this mrclean one it only has the original 4.
but it has the usb-> pc sync and stuff that the new one has
Prophet
does such a rom also excist for the htc prophet??
in my case the orange spv m600 with latest dopod rom.
or is this rom already good to go for prophet users???
could al the people who reply to this post mention on what device the installed it on.
so everybody knows whats going on here.
I know this is the forum for the wizard but allot of programs and upgrade for the wizard are usable on the prophet.
can you tell me if this is possible or not?
thanx
gizm0luvsu said:
what i mean is that i know its supposed to look different. when i was using 2.21 it had 5-6 things in it now when i upgraded to this mrclean one it only has the original 4.
but it has the usb-> pc sync and stuff that the new one has
Click to expand...
Click to collapse
The Comm Manager in the MrClean ROM has seven options in it. Just like the other AKU 2.3 ROMs. If you've only got four options in the Comm Manager you don't have the ROM properly flashed.
I would double check to make sure that the version numbers match what I have posted above. Also, make sure your device is CID-unlocked before trying to flash this ROM.
i actually reflashed my rom and now it does have the 7 thx for the info
Re: Prophet
rebelish said:
I know this is the forum for the wizard but allot of programs and upgrade for the wizard are usable on the prophet.
can you tell me if this is possible or not?
thanx
Click to expand...
Click to collapse
I would NOT try to flash this ROM to anything but a Wizard device. I honestly wouldn't know if similar ROMs exist for other devices. Since I only have a Wizard, I can only test things on a Wizard so anything I build is going to be solely for the Wizard (at least until I get my grubby hands on more toys).
Re: Prophet
gamescan said:
rebelish said:
I know this is the forum for the wizard but allot of programs and upgrade for the wizard are usable on the prophet.
can you tell me if this is possible or not?
thanx
Click to expand...
Click to collapse
I would NOT try to flash this ROM to anything but a Wizard device. I honestly wouldn't know if similar ROMs exist for other devices. Since I only have a Wizard, I can only test things on a Wizard so anything I build is going to be solely for the Wizard (at least until I get my grubby hands on more toys).
Click to expand...
Click to collapse
Ok thanx for that info well at least its out end on the forum i'm quite sure somebody is gonna take a look at youre rom and figure out how to use this on the prophet after all xda-developers.
nice fast reply appriciate that i might have tryed it out if youre reply would take a little bit longer cheers.
Registry Tweaks
Attached is a cab file containing a bunch of common registry tweaks that may not be enabled after installing this clean ROM.
Here are the settings the cab file contains:
; Menu Animations - 6 is ON, 0 is OFF
[HKEY_LOCAL_MACHINE\System\GWE\Menu]
"AniType"=dword:00000006
; Enable unsigned cab install
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000101a"=dword:00000001
; Disable GPRS disconnect button
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:00000000
; IE Cache to storage card
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders]
"Cache"="\\Storage Card\\Temporary Internet Files"
; Enable EDGE Icon
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"EnableDifferGprsEdgeIcon"=dword:00000001
; Enable Keyboard indicator
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"EnableIndicator"=dword:00000001
; Enable 4-way scrolling
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Navigation]
"4-Way Nav"=dword:00000000
; Enable G wireless
[HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS]
"dot11SupportedRateMaskG"=dword:00000008
;Enable Cleartype in landscape mode (1=OFF 0=ON)
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"offOnRotation"="0"
; Disable Message Sent notification
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings]
"SMSNoSentMsg"=dword:00000001
; Configure Pocket Internet Explorer to browse WAP pages:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings]
"Accept Header"="application/xhtml+xml, */*"
; Enable Network Time Update page
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting]
"ShowTimeZonesPage"=dword:00000001
; Enable receiving of files over Bluetooth/IrDA
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:00000001
great rom. thank you. nice funny splash screen. why don't make theme too?
ok sorry for the newb question..
but..
being with cingular - 8125 what will i loose with this ROM (apps / setting? ) .. will i just have to re configure my ie settings to cingular..
again sorry for the new question all this rom stuff is still new to me .. I am running the latest summter rom and have had success with it but i think there are some radio issues...
Radio ROM
Hi gamescan
Could you upload also just the 8125 Radio ROM ?
Thx in advance and cheers
hrb

Helmi BA WM2k5 AKU3.0 Beta (v.1.2 Beta)

Helmi BA WM2k5 AKU3.0 Beta (v.1.2 Beta)
In this beta, Today Themes, BTA2DP, PIMG, Photo Contact, GPS, Animated Gif, Phone with CommManager (signal light turn off while in flight mode) FIXED!
Known issues:
1. There no internal integration beetween Comm Manager and Wifi, cos Different Driver beetween Wizard & BA (I've succesfully combine them in the past but forgot now how to do it again...lol).
2. When BT On, IR On, WIFI On, ActiveSync On, the tray might flick.
3. Some help file and Some Picture/images has been strip out from the ROM to create space for more usefull app.
Tips:
1. Disable Sound (Sound & Notification >> Events) might help system speed.
2. Disable Sound in phone (Phone Settings >> Keypad >> Off) might help phone speed.
3. Backup/Sync ur PIM with active sync first (Contact, email, etc) if u upgrade it from old rom (anything below AKU3.0 ROM) cos PIM management are different from the old rom ur old backup will not work, but ActiveSync will work ok.
Please read the readme file, I dont hv time to update Wiki page, but I'll love if someone do the wiki page for me. btw I think the information in Readme file is enough to flash ur rom and since no 'real' extended rom so no further preparation is needed, but u might consider to make ur old Extended_ROM size to 128kb to make more storage space for ur device.
Btw The EXTROM folder is included all operator curently supported for GPRS/MMS Setting, just delete the .CAB in ExtROM that u dont need.
Currently Supported Operator:
Most ASIA, O2 UK, US, Orange Israel:
1O1O
3-DUALBAND-
AIS
Celcom
ChungHwa Telecom
CTM
DiGi
DTAC
Globe
IM3
M1
Maxis
New World Mobility
One2Free
Optus
Orange Thailand
Peoples
ProXL
Satelindo
SingTel
Smart
SmarTone
StarHub
StarHub Prepaid
Sun Cellular
Sunday
Telkomsel
Telstra
Vodafone Australia
O2 UK
T-MOBILE UK-MMS
T-MOBILE USA Internet
ORANGE Israel
MIDDLE EAST:
Batelco
Etisalat
Eygept Vodaphone
Fastlink
Jawalnet
Maroc Telecom
Mobinil
MTC
Oman Mobile
QTel
Syriatel
Vodaphone
Wataniya
WIND
If ur operator not in the list just delete all file in OPERATOR folder except CAB-Customization-BlueAngel-O2ASIAWWE-19May05.reg.CAB and run it to make a default mms profile that u can change, see README (in .RAR) for more detail.
With the Global Contacts Access plugin from Microsoft U can use the central/global exchangeserver address book. (Thanks to xdaradar for the info)
look here:
https://www.microsoft.com/windowsmobile/downloads/global/default.mspx
and download the ROM here:
http://micmeo.com/BlueAngel/index.php?dir=AKU_3.0
or here:
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.0_32mb_v1.2.zip
thanks MicMeo for the space and the help, thanks man, really appreciate it.
BIG Thanks to MAMAICH
and also Bepe, Lt.Cmdr.Ivan, MicMeo, Midget_1990, xplode, Black6spdZ, Xdaradar, thingonaspring, odie3, imatrix, spkr4thdd, Brazilian Joe, efjay, motisu... geez to much to mention, cos so many people involved with this rom...thanks guys...
EDIT: The original O2SMSPLUS.CAB in extrom packet hv problem, Unable to send/recieve sms use the modify version here if u planning to use it. remove the old one, reset device and install the attachment bellow.
or delete the vcard.lnk in \windows\startup will also fix this problem.
Assume Today Theme fix in this ROM too? [Nevermind - see that it is via the Readme]
Also what do you mean by "Tray Flick"?
odie3 said:
Assume Today Theme fix in this ROM too? [Nevermind - see that it is via the Readme]
Also what do you mean by "Tray Flick"?
Click to expand...
Click to collapse
yes it does, I've edit the post, I means the tray icon is blinkin/flick it also happens in My Aku2.3 right?,
In my device if i turn on Wifi, BT, IR, ActiveSync on the same time. the tray is blinkin a little.
btw, I hv 1 question, Is there any WModem that work on WM5? do you guys ever have a Wmodem that work with BA WM5? please let me know. and also any info about BT SIM ACCESS PROFILE (SAP) is more then welcome...
Another suggestion to make communication easier
So, in the quest to have things going smooth and to make our lives easier, I want to drop in another suggestion.
In Helmi 1.1 we had a few hotfixes in the form of cab files which added/fixed features on the rom
So, my suggestion is to adopt the standard usage of a few KEYWORDS, so that we can instantly identify the attachments in the forum thread
ADDON - cab adds a feature
HOTFIX - cab fixes (or attempts to fix) broken stuff
These identifications could come embedded on the cab name. Additionally, to avoid confusion on which CAB is the latest one, they should use VERSION NUMBERS too.
after the KEYWORD, then would come either the version number, starting at 1.0, or the keyword UNTESTED.
Examples:
10xSpeed_Increase.HOTFIX.UNTESTED.cab
10xSpeed_Increase.HOTFIX.1.0.cab
I believe this little detail could make testers' lifes easier...
Up, up and away!
Downgrade first?
I know this is probably in the wiki, but I didn't find it from a brief search.
I'm currently on Tuma 1.3. If I want to try this, do I need to downgrade to 2003SE first? If not, do I need to wipe the hive, etc?
Sorry for the basic question...
You can upgrade to Helmi's ROM without downgrading.
But yes, you will need to clear the registry.
SpeedTweak CABs?
@helmi:
The 'speedtweak' CABs are not inside the EXTROM. Can you put them on the FTP site or attach them on the first post of the thread? BTW, just flashed, going to test now.
And many many thanks!
are the contact entries shown using pocket informant with this new rom?
hey helmi_c,
great work man. and plz remember how to integrate beetween Comm Manager and Wifi.
I notice u removed Speedtweak cab from your v1.2. has the speedtweak been incorporated directly or we dont need that anymore.
good work man,
imatrix
raymonds said:
are the contact entries shown using pocket informant with this new rom?
Click to expand...
Click to collapse
It can be seen with Pocket Informant 2007 Beta.
http://download.pocketinformant.com/FTF/PI2007/
Thanks mi...!!!!!!!
:twisted:
Helmi AKU3.0 v1.2beta
hey helmi_c,
Nice and good great work man. Is sprit backup program work with this new Rom Helmi AKU3.0 v1.2 Beta and what about the speed and stability of the new Rom , also I can not used Pocket Informant program
PDA2K
Helmi AKU3.0 v1.1beta
:lol:
MicMeo said:
raymonds said:
are the contact entries shown using pocket informant with this new rom?
Click to expand...
Click to collapse
It can be seen with Pocket Informant 2007 Beta.
http://download.pocketinformant.com/FTF/PI2007/
Click to expand...
Click to collapse
wow you've just made this new rom a lot more attractive. thanks a lot, MicMeo!!!
i just flashed ... will soon give my comments.
great work, too, helmi!
hmm... when i'm in phone mode and press some numbers, the corresponding names aren't shown... where can i get the cab file?
Thank yoy
i will try it now
sms_alert_fix :?
when i started my ppc i got an error saying sms_alert_fix could not be found :s why is taht so?
hmm... when i'm in phone mode and press some numbers, the corresponding names aren't shown... where can i get the cab file?
Click to expand...
Click to collapse
Do u mean Smartdial?
Maybe this cab can help u to solve ur prob.
[/quote]
sevenslidegrills said:
hmm... when i'm in phone mode and press some numbers, the corresponding names aren't shown... where can i get the cab file?
Click to expand...
Click to collapse
Do u mean Smartdial?
Maybe this cab can help u to solve ur prob.
Click to expand...
Click to collapse
[/quote]
thanks sevenslidegrills, but when i run the cab file, it says
"Installation of WM5_SmartDial.Cab
was unsuccessful."
am i supposed to change anything before installing the cab file?
edit: i found another cab file with the same name (but larger size) that worked! should perform soft reset after installation.
Bluetooth and turn on ???
Are there some ideas about BT , when device is turning on by itself ,
And as i sad WM5 is turning on by itself without display you can observ it by playing mp3's and turning off your device...
MicMeo said:
raymonds said:
are the contact entries shown using pocket informant with this new rom?
Click to expand...
Click to collapse
It can be seen with Pocket Informant 2007 Beta.
http://download.pocketinformant.com/FTF/PI2007/
Click to expand...
Click to collapse
Does this beta need any registration info?

Helmi BA WM2k5 AKU3.2 Beta (v.1.3.1 Beta)

Helmi BA WM2k5 AKU3.2 Beta (v.1.3.1 Beta)
In this minor update currently progress is:
- Wifi & Bluetooth Coexistentcy.
- Ability to save everywhere with Pocket Excel
- Smart Dial v2.2 is added to ROM. (if u dont use it just disable it)
- Flight Mode, Task Manager, WM5 New Menu, WM5 Storage, & USB Mode Switch added to extras folder.
- StartUp Manager by Baniazek
- Use ace_ddi as video driver (Landscape & Portrait fully supported but gif file wont show in PIE, use D3D_Driver driver to support gif with PIE but Landscape mode will need to re-align after soft reset)
- .NET Fix included
- Transcriber included.
In this beta, hv all the feature from v1.2 plus new OS built (AKU3.2 OS part taken from Lt.Cmdr.Ivan AKU3.2 for UNI with help by indra9110) and speed improvement and also new ROM base (5.04.06 taken from logout template since its newer version display).
Known issues:
1. There no internal integration beetween Comm Manager and Wifi, cos Different Driver beetween Wizard & BA (I've succesfully combine them in the past but forgot now how to do it again...and i still cant remember it...hell!!!..lol). I think I'll love someone who help on this.
2. When BT On, IR On, WIFI On, ActiveSync On, the tray might flick.
3. Some help file and Some Picture/images has been strip out from the ROM to create space for more usefull app.
Tips:
1. Disable Sound (Sound & Notification >> Events) might help system speed.
2. Disable Sound in phone (Phone Settings >> Keypad >> Off) might help phone speed.
3. Backup/Sync ur PIM with active sync first (Contact, email, etc) if u upgrade it from old rom (anything below AKU3.0 ROM) cos PIM management are different from the old rom ur old backup will not work, but ActiveSync will work Ok.
Please read the readme file, I dont hv time to update Wiki page, but I'll love if someone do the wiki page for me. btw I think the information in Readme file is enough to flash ur rom and since no 'real' extended rom so no further preparation is needed, but u might consider to make ur old Extended_ROM size to 128kb to make more storage space for ur device.
WIKI page is provided by Fraser (thanks man! it really help alot) here the wiki page:
http://wiki.xda-developers.com/index.php?pagename=Helmi
Btw The EXTROM folder is included all operator curently supported for GPRS/MMS Setting, remember to delete the .CAB in ExtROM that u dont need.
Currently Supported Operator:
Most ASIA, O2 UK, US, Orange Israel:
1O1O
3-DUALBAND-
AIS
Celcom
ChungHwa Telecom
CTM
DiGi
DTAC
Globe
IM3
M1
Maxis
New World Mobility
One2Free
Optus
Orange Thailand
Peoples
ProXL
Satelindo
SingTel
Smart
SmarTone
StarHub
StarHub Prepaid
Sun Cellular
Sunday
Telkomsel
Telstra
Vodafone Australia
O2 UK
T-MOBILE UK-MMS
T-MOBILE USA Internet
ORANGE Israel
ORANGE UK
MIDDLE EAST:
Batelco
Etisalat
Eygept Vodaphone
Fastlink
Jawalnet (Some Modification is needed)
Maroc Telecom
Mobinil
MTC
Oman Mobile
QTel
Syriatel
Vodaphone
Wataniya
WIND
Note on MMS configuration, since it was from the wm2003 u should set the MMS. to go into MMS config and select ur operator MMS on the Connect Via selection. Messaging >> MMS Configuration >> Server >> Connect Via >> your operator MMS account
If ur operator not in the list just delete all file in OPERATOR folder, cos the MMS_ENABLE.CAB already build a standar changeable MMS account.
With the Global Contacts Access plugin from Microsoft U can use the central/global exchangeserver address book. (Thanks to xdaradar for the info)
look here:
https://www.microsoft.com/windowsmobile/downloads/global/default.mspx
and download the ROM here:
http://micmeo.com/BlueAngel/index.php?dir=AKU_3.2
or here:
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.2_32mb_v1.3.1.rar
thanks Indra9110 and micmeo for the space and the help, thanks man, really appreciate it.
BIG Thanks to MAMAICH
and also Bepe, Lt.Cmdr.Ivan, indra9110, MicMeo, Fraser, Logout, Midget_1990, xplode, Black6spdZ, Xdaradar, thingonaspring, odie3, imatrix, spkr4thdd, Brazilian Joe, efjay, motisu... geez to much to mention, cos so many people involved with this rom...thanks guys...
NOTE:
Rommaker, U welcomde to take apart this rom and use or built with ur own custom rom, cos u might thing this rom as a base/test built for AKU port (My way/Hardcode ways). or I'll post the AKU3.2 OS dir if someone needed it (bepe's way, isn't he brilliant??).
But please, gave credits to all hard worker guys here who fix the huge bug list If u use it and before u put ur name on it...specially if u're who want/usually completely copy paste the contain of the rom... btw post input or bugfix for os/rom bug is even more welcome, lets make it better guys...
best regard
helmi
Thank You
Dear Helmi, I want to thank you and all other people who works for a better ROM for us, the BA users. You are great!
Thank you very much for your hard job and your big passion...
I'll try it as soon as possible
:wink:
Tweaks2k2 problems ...again
Hi Helmi_c,
Thanks again for a new, wonderful ROM. It mostly seems to be running smoothly.
1 problem that has returned. under 3.2 1.3, after I installed the .NET fix, tweaks2k2 was able to register. With the new 1.3.1, it bombs out when I go into the register page. I tried to install the .NET patch but it didn't help.
Any ideas?
Have just downloaded the new ROM, gonna flash soon. Will have feedbacks as soon as possible.
Re: Tweaks2k2 problems ...again
motisu said:
Hi Helmi_c,
Thanks again for a new, wonderful ROM. It mostly seems to be running smoothly.
1 problem that has returned. under 3.2 1.3, after I installed the .NET fix, tweaks2k2 was able to register. With the new 1.3.1, it bombs out when I go into the register page. I tried to install the .NET patch but it didn't help.
Any ideas?
Click to expand...
Click to collapse
usually that got something to do with ati driver, u should use d3d_ddi driver moti. I've make Ace_ddi default video driver since it fully support Landscape & Portrait nicely and its faster, but some .NET might not function very well, especially Tweak2k app. currently I dont hv driver with the two driver functionality... arrgh...
many thank
thanks alot krub=pom for your work hard
i cannot use a2dp and avrcp with my bluetooth stereo headset
stk doesnt work still
Re: Tweaks2k2 problems ...again
helmi_c said:
motisu said:
Hi Helmi_c,
Thanks again for a new, wonderful ROM. It mostly seems to be running smoothly.
1 problem that has returned. under 3.2 1.3, after I installed the .NET fix, tweaks2k2 was able to register. With the new 1.3.1, it bombs out when I go into the register page. I tried to install the .NET patch but it didn't help.
Any ideas?
Click to expand...
Click to collapse
usually that got something to do with ati driver, u should use d3d_ddi driver moti. I've make Ace_ddi default video driver since it fully support Landscape & Portrait nicely and its faster, but some .NET might not function very well, especially Tweak2k app. currently I dont hv driver with the two driver functionality... arrgh...
Click to expand...
Click to collapse
Helmi_c
as usual you are a wonder!!! I installed the ddi driver, registered tweaks2k2 and the reinstalled ace driver. Other than this small proplem, everything seems to be working well.
Re-installing programs
Hello.
Which backup programme would ppl recommend to reinstall all settings and programs from the previous roms ?
At the moment i'm using Helmi BA WM2k5 AKU3.2 Beta v.1.3.0, but itching to upgrade, yet not looking forward to re-installing 30 programs.
Many Thanks Helmi You're the man.
Changing vide drivers
Hello Motisu,
How did you install the ddi driver then reinstal ace? And where do you download from?
I have 3 programs that display this error incl 'pocket workout wizard' grrr.
Many thanks.
Re: many thank
mpx2003 said:
i cannot use a2dp and avrcp with my bluetooth stereo headset
Click to expand...
Click to collapse
AVRCP works fine with my Motorola HT820. Nice work Helmi_c.
Re: Changing vide drivers
AbuGWM5 said:
Hello Motisu,
How did you install the ddi driver then reinstal ace? And where do you download from?
I have 3 programs that display this error incl 'pocket workout wizard' grrr.
Many thanks.
Click to expand...
Click to collapse
both of them are in the extrom subdirectory.
Re: Changing vide drivers
motisu said:
AbuGWM5 said:
Hello Motisu,
How did you install the ddi driver then reinstal ace? And where do you download from?
I have 3 programs that display this error incl 'pocket workout wizard' grrr.
Many thanks.
Click to expand...
Click to collapse
both of them are in the extrom subdirectory.
Click to expand...
Click to collapse
I still can't find them
Sorry Moti.
So, is Microsoft Voice Command still not working in the newer betas?
I hope it's working, since its the only issue keeping me away.
In Vesion 1.3, I could used Bluetooth but this vesion 1.3.1 don't use bluetooth. Don't open and manager bluetooth = Don't use Bluetooth (before/after soft reset) Help me!
Re:
viit said:
In Vesion 1.3, I could used Bluetooth but this vesion 1.3.1 don't use bluetooth. Don't open and manager bluetooth = Don't use Bluetooth (before/after soft reset) Help me!
Click to expand...
Click to collapse
No Bluetooth!
nice rom! have several questions, though...
1. do you recommend an overclocking application for this rom?
2. similar to the 1.3 version, while the BA is docked and charging, and an alarm/reminder or missed call comes, the charging is suspended until i touch the screen. the problem is that the battery drains out even if it is docked. any suggestions to remedy this?
3. the left portion of the display for call history does not show up (transparent)
4. i see some additional system settings, what do these do?
--- clear storage (nothing comes up when it is clicked)
--- startup
5. thanks for bringing back flight mode in the programs>extras. what are the following apps for?
--- wm5 storage
--- task manager
6. can the backup i made through spb backup be used to restore pim data?
Re: Changing vide drivers
AbuGWM5 said:
motisu said:
AbuGWM5 said:
Hello Motisu,
How did you install the ddi driver then reinstal ace? And where do you download from?
I have 3 programs that display this error incl 'pocket workout wizard' grrr.
Many thanks.
Click to expand...
Click to collapse
both of them are in the extrom subdirectory.
Click to expand...
Click to collapse
I still can't find them
Sorry Moti.
Click to expand...
Click to collapse
The CAB was in AddON dir.
odie3 said:
So, is Microsoft Voice Command still not working in the newer betas?
I hope it's working, since its the only issue keeping me away.
Click to expand...
Click to collapse
hallo there oddie, hmm... I think M$ VC will never work with AKU3.xx cos there's a difference with phone,PIM management method.
I've been thinkin to built a AKU2.3 since AKU3.0/3.2 hv some compabilty issue with some app, since most of the developer didn't realize/aware there's a AKU3 exist :lol: ...,
maybe I'll built a better AKU2.3 ROM if I hv time, since it support most of the app...hmm...
What do you guys think?
AKU3.xx newer rom but hv problem with some app
or
AKU2.3 older rom built but it seems to hv much compability with most of the software & PIM app.?
Newer is better.

Missing QuickGPS / youtube / Voip with SFR

Hi,
My Diamond is customised by SFR ( Vodafone Live).
It missing QuickGPS, youtube, Voip.
Youtube ok by : m.fr.youtube.com
Could you add in new .cab for me and the community XDA? : QuickGps/GpsRapid.
Could you relpy me with the link to cab for install the viop (ok system)?
I'm newbe and excuse me for my english.
Thanks
help me please ;-)
Just flash a different ROM, that way you'll get rid of the vodafone branding altogether...
could you please post the original user agent on the sfr branded diamond ?
Hi,
No, I don't want flashing rom.
My waranty is 24 month.
For IE:
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"Vodafone/1.0/HTC_Diamond/1.37.163.4"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
"UAProf"="http://www.htcmms.com.tw/voda/diamond-1.0"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
"Version"="MSIE 6.0"
(Default)="Vodafone/Mozilla/4.0"
"Desc"="Default (Windows CE)"
"UA-Language"="JavaScript"
"Platform"="Windows CE"
"Compatible"="compatible"
For Opéra :
about:config
Custom User-Agent : Vodafone/1.0/HTC_Diamond Opera Opera/9.50 (Windows NT 5.1; U; fr)
Hi,
Please:
Could you add in new .cab for me and the community XDA? : QuickGps/GpsRapid.
Thanks
Please...
cry cry cry
help me please...
could you extract the quickgps files for me?
For SFR brand :
you can already help you file below (to be placed in the \ windows)
It works, but the background screen is missing, writing white on white ...
http://www.megaupload.com/fr/?d=773IEIB1
I have also a vodaphone-SFR HTC with the original ROM. I am looking for the quickGPS applicaion.
I have copied all the files in windows directory. I can launch the quickgps application. Then, I have done a soft reset. After connexion to my laptop (windows Vista), I launch the application but there is an error message that the connection fails (even if I can surf with opera and IE).
Did you experience this probleme?
Don't we need a real cab file or to do some modification in the database?
Flash your ROM with the last one. It's not difficult with the HardSPL 1.40 Unsigned Olinex, and you can reverse the process by downloading and reflashing with SFR-Vodafone FR ROM, that you can download from the net, and you don't lose your 24-month warranty. The perfs of your diamond will increase dramatically (I've done it with my SFR branded Diamond last week...)
Hello matt92, thank you for your advice. I still have few questions.
How will te performance of the diamond will improve if I flash with a recent ROM and then flash again to the SFR ROM? Since, if I go back to the previous ROM I don't expect any change.
Are you sure that unlocking the device with HardSPL is not enough to lose the warranty?
Then last question, if I flash "back" with the vodaphone SFR ROM, I don't expect to have quickGPS as now. What did you use to install it?

Categories

Resources