Alright, I've done my research and know how to get a hero ROM running on the G1 and the steps that need to be taken. But a lot of the tutorials and pages I read never mention the Rogers dream, and I don't want to do anything that might mess up my phone. I was just looking for someone to point me in the direction of some tutorials that work with the Rogers dream, thanks!
My dream info:
DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Related
I would like to thanks everyone in advance for help with my questions. (I have searched the forums for this information but have not found the answers to my exact questions.)
How can you verify whicg SPL you are running? What exactly is the SPL and its function? I thought that if you held the camera button and power it would show you all the information about spl and radio but maybe its not the case. I tried to update to danger(haykuro/hero) spl and it doesn't say danger any where. below is the output of my camera+power boot screen.
___________________________
DREAM PVT 32B ENG S-OFF
HBOOT- 1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
APR 20 2009, 15:30:43
HBOOT
<BACK> Fastboot Mode
_________________________
Currently I am running Cyanogen 1.4 recovery and CM 4.0.2 stable build.
I would also like to give props to cyanogen and all the other programmers for making all this possible.
Quest60 said:
I would like to thanks everyone in advance for help with my questions. (I have searched the forums for this information but have not found the answers to my exact questions.)
How can you verify whicg SPL you are running? What exactly is the SPL and its function? I thought that if you held the camera button and power it would show you all the information about spl and radio but maybe its not the case. I tried to update to danger(haykuro/hero) spl and it doesn't say danger any where. below is the output of my camera+power boot screen.
___________________________
DREAM PVT 32B ENG S-OFF
HBOOT- 1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
APR 20 2009, 15:30:43
HBOOT
<BACK> Fastboot Mode
_________________________
Currently I am running Cyanogen 1.4 recovery and CM 4.0.2 stable build.
I would also like to give props to cyanogen and all the other programmers for making all this possible.
Click to expand...
Click to collapse
You must not have searched to well cause this topic has been talked about soooooo many times. And yes you do have the newest spl installed. It won't say danger.
Thanks for your expertise.
No problem
I know I have seen this topic floating around here before, but for the life of me I can not seem to find the thread, so I will re-ask in the hopes that someone is kind enough to answer.
Death..Danger...Eng...Development...Experimental...Haykuro...
Skateboarding Androids...Rainbow...
All of this talk about SPLs (and just as important, Radios)..
How do we (the end users) know which SPL we have? We all know to hold Camera while booting to get to fastboot, but once we are there, everything seems to be greek...nothing that identifies which SPL we have (IE: it does not say Danger, or Eng, etc)..
For instance, I have the skateboarding droids, and mine says:
Code:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
RADIO-2.22.19.261
Apr 20 2009, 15:30:43
HBOOT
<BACK> Fastboot Mode
Does the ENG in the first line indicate that I have the Eng SPL? What SPL do I have, and what are the distinguishing items I am looking for to be able to determine that?
jmhecker said:
I know I have seen this topic floating around here before, but for the life of me I can not seem to find the thread, so I will re-ask in the hopes that someone is kind enough to answer.
Death..Danger...Eng...Development...Experimental...Haykuro...
Skateboarding Androids...Rainbow...
All of this talk about SPLs (and just as important, Radios)..
How do we (the end users) know which SPL we have? We all know to hold Camera while booting to get to fastboot, but once we are there, everything seems to be greek...nothing that identifies which SPL we have (IE: it does not say Danger, or Eng, etc)..
For instance, I have the skateboarding droids, and mine says:
Code:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
RADIO-2.22.19.261
Apr 20 2009, 15:30:43
HBOOT
<BACK> Fastboot Mode
Does the ENG in the first line indicate that I have the Eng SPL? What SPL do I have, and what are the distinguishing items I am looking for to be able to determine that?
Click to expand...
Click to collapse
You have the danger/haykuro/death spl (they're all the same), this can be noticed from the HBOOT-1.33.2005
Can someone shade some light? I have a rooted HTC Dream from Rogers Canada showing the following information:
DREAM PVT 32B ENG S-OFF
HBOOT- 1.33.2005 (DREA21000)
CPLD-4
RADIO-3.22.26.17
Apr 20 2009, 15:38:43
Now coming to downloading Rom images should I go with the one Compatible with:
HTC Dream (32a): RogersDream, Vodafone Dream or HTC Dream (32b): T-Mobile G1 / HTC ADP1
Please note mine has 32b board.
A) there is no such thing as a 32a dream
B) the radio determines the memory layout ebi0 for 1.x and 2.x radios, ebi1 for 3.x radios, nothing else works on a dream at this point in time
C) magic32a devices where the first with the ebi1 radio/kernel so many of the ebi1 roms are called 32a (the 32a radio does allow access to the extended memory on a 32a magic, however this is impossible on 32b magic/dreams due to the lack of phyisical ram)
D) you can switch to a 2.x radio with fastboot, only thimg to note: it may not be calabrated as well for 2g networks and if you are a rogers customer you may need to call to retain your data if the online wavier fails
Note use of recovery to flash a 2.x radio will brick your phone so don't do it that way.
As for what should you install, if there is no radio or spl in the upgrade.zip it will not brick your phone, if its for the wrong radio type it will not boot.. thus you need ebi1 roms unless you use fastboot to install an ebi0 radio.
bigmama said:
Can someone shade some light? I have a rooted HTC Dream from Rogers Canada showing the following information:
DREAM PVT 32B ENG S-OFF
HBOOT- 1.33.2005 (DREA21000)
CPLD-4
RADIO-3.22.26.17
Apr 20 2009, 15:38:43
Now coming to downloading Rom images should I go with the one Compatible with:
HTC Dream (32a): RogersDream, Vodafone Dream or HTC Dream (32b): T-Mobile G1 / HTC ADP1
Please note mine has 32b board.
Click to expand...
Click to collapse
I just dusted off my Rogers Dream and I'm running exactly what you posted above on CyanogenMod 6.0.0-DS.
I noticed your signature states Ginger Yoshi now for the Dream, what did you do or instructions did you follow?
First hello EVERYBODY.
I am really glad to have answer from this powerful forum.
now i bought an other -G1 orange- and i am afraid to brick it again. now,would you help me to root it and install a new rom, step by step please,
i used to read almost all the threats about rooting and install new ROM, i am really scared to bricked again
hboot says:
DREAM PVT 32B SHIP S-ON
HBOOT-1.42.0000 (DREA20000)
CPLD-4
RADIO-2.22.16.19
Apr 6 2009, 18:03:42
and while booting i have Orange logo
This is Rogers Dream, yes?
hi... just wanna ask.. is it normal to stuck at T-Mobile G1 logo for few a minutes after installing froyo by lazlo? i install the Froyo because im curious about it's speed. they say it's one the best rom out there, in term of speed. that's why i try to install it and i did it. but when my phone reboot after the installation, it just stuck at T-Mobile G1 screen. i've waited for about 5 to 6 mins. but it is still there. is it normal? or i've done something wrong or forgot something ?
What is your current SPL/HBOOT and radio?
Dream PVT 32B Eng S-off
HBOOT-1.33.2005 (DREA10000)
CPLD-4
Radio-2.22.23.02
do i have a wrong radio and spl ? XD
junio07 said:
Dream PVT 32B Eng S-off
HBOOT-1.33.2005 (DREA10000)
CPLD-4
Radio-2.22.23.02
do i have a wrong radio and spl ? XD
Click to expand...
Click to collapse
SPL: 1.33.0013d (hboot)
RADIO: 2.22.27.08 / 28.25
you should have these
and ext partition then it should run fine
I learn something。Thanks
dani132 said:
SPL: 1.33.0013d (hboot)
RADIO: 2.22.27.08 / 28.25
you should have these
and ext partition then it should run fine
Click to expand...
Click to collapse
Thanks !!!
first initial boot time is a little long, but subsequent reboots will be faster. froyo by lazlo is fast,
FroyoByLazlo is awesome ROM but does not contain CZECH Language,can someone help me?????Some tips how to add .... i have tried MoreLocale2,but it sucks... ..please...help....