Hello all,
I just got my AT&T Tilt and love it so far, except for one major annoyance. When I press the power button, the device will turn the screen back on after a few seconds to a few minutes. The problem is when it's in my pocket, it can accidentally call people. My 8125 and 8525 did not experience this issue.
Any suggestions?
Thanks!
Button lock
It sounds as though the phone isn't set to lock all buttons except the power button when it is in standby. This happened to me last time I re-flashed my Wizard, and I couldn't figure out for ages why my battery was draining so quickly as well!
Settings > Buttons > Lock
Hmm, not seeing any option under Buttons or Lock. I do remember this setting from WM5. It does appear, however, that the buttons are not turning the phone on, it's just waking up even if I leave it on a desk.
You can add lock to the home screen
first press and hold the hang-up button so that it locks. Then just push the power button once. This puts it in standby.
There is a idle timeout for going on standby mode, but I can't find a setting to auto-lock.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
Are you paired to a Bluetooth device? I see similar behavior in my 8525 when in my car - the BT car kit does stuff which "wakes" the 8525
Richard
Try this leaving Google Maps On the Screen
Hi Guys,
I get this behavior when I have Google Maps running. It will even cycle the screen on and off a couple times.
nope and nope. just sitting on the today screen.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
I have the very same problem.
However, my girlfriend whom I also bought a Tilt for, her's doesn't do it.
We've installed all the same software too, so I'm a little puzzled.
start>settings>system> key lock. set it to lock all buttons except power.
rzanology said:
start>settings>system> key lock. set it to lock all buttons except power.
Click to expand...
Click to collapse
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
JonRick said:
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
Click to expand...
Click to collapse
Any number of applications might be starting the device, from weather apps to calendar, diary, time sync etc etc. For example, HTCs weather app will do it depending on how often you have it set to another example I came across from someone was TREO ALERTS that contains a script "refresh.mscr" and it was set up refresh time 30 seconds (this was turning his TyTn II on by itself).
Mike
hard reset and try again.
i'm betting that none of these suggestions were helpful (except the one about some application generating a wakeup event without any other visual notifications).
i was having the same problem, but i just tried to narrow down which running program was causing the events. it's one of:
* wireless manager
* messaging
* IM
my guess is IM; i'm going to test that out in a second.
well, it's none of the above. still seems to wake up randomly anywhere from 15 seconds to several minutes.
seems to happen more frequently when it's just been turned off.
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
dscline said:
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
Click to expand...
Click to collapse
i'm fine with using the lock function, but it still turns on randomly, using battery, and eventually unnecessarily yellowing the screen from backlight aging. my next approach is to check out the notification queue, using a notification cleaner app.
So i am having a similar problem. When i press the power button, the phone's screen turns off but when the keyboard slides, it turns back on... is there a way to make it so the keyboard sliding does not turn on the device? I think the keyboard slides around a little when in my pocket and i hate pushing 3 buttons to unlock my phone... thanks
I was having the same problem.
This is an issue with the ATT rom. Flash over HTC rom and you will be all set.
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the TyTn II):
http://forum.xda-developers.com/showthread.php?t=341419
This just started happening:
I restart my tilt. I push the power button and the display brightness gets brighter but the device does not turn off. I push it again, the device turns off but then I can't get it to turn back on without soft resetting! What the crap??!!
Any clue what is going on?
Thanks!
Alan
I am just a n00b, but it sounds like your power button got mapped to your brightness control somehow, and when the screen goes black, the device is not off, just brightness set to 0. When you soft reset, the unit just sets back to default. I am not proficient in mapping the buttons, but a quick search on the forum should help. I know that there are a lot of threads having to do with mapping keys.
Hi
I experience the same problem and strange enough after I downloaded a patch released by HTC for potential issue with blue tooth and the phone.
A soft reset does not solve the problem, instead a Sync with the PC (even not a full one) cure it for a period of 2-3 days.
I have the impression that it is more complicated than just a registry issue. For instance I can not run the TOM TOM any more.
The HTC support only suggested a hard reset that I did but for complicated reasons I was forced to restore a back up I had.
So I am still affected by this problem.
I did a hard reset and used spb backup to restore everything to the day prior. The last thing I remember installing was s2u2 0.99c which seems that it would mess with how the device responds to the power button. I'm going to post over there and see if there is a chance it was the culprit.
Alan
You have to disable directdraw in s2u2.
persiansown said:
You have to disable directdraw in s2u2.
Click to expand...
Click to collapse
It was and is disabled at least according to s2u2 settings. I did notice that for me in 0.99c DPAD was enabled but did not work.
Since upgrading to the HTC WM6.1 ROM and installing HardSPL 3.56, I seem to have lost the ability to launch the phone when it's in sleep mode by pressing either the send or end buttons. In fact, NONE of the buttons will wake the device. Is this a setting that just needs to be changed back, or did I screw the pooch?
Duh.
Disregard. Looks like the Settings/System/KeyLock defaulted to 'Lock all buttons except power button' setting.
Man, going from an HX4700 to a phone is something of a learning curve.
I don't know if it's just the rom i'm using but i've noticed that 80% of times when I press the power button to take my phone out of sleep, it turns on and then goes off about half a second later, and I have to press it again to keep it on.. is this a known bug?
It's not just you
I've been seeing the same behavior with mine, and I'm running the stock ROM.
Same issue here ever since flashing stock WM 6.1 ROM.
You all are not alone...
I couldn't find the thread after a quick search, but this is a known issue of the phone, not the customized roms. About 5 or 6 months ago, i read a post saying that HTC was trying to figure out a solution. Perhaps someone will post a better reply than mine.
I have this exact same issue.... I am using the stock 6.0 rom still (don't laugh)... It also does it when I receive a TXT message (and it is sleeping) and anything else that would normally power it on from sleep mode... I am glad to see that I am not the only one experiancing this....
My phone did not always do this... but has been for quite some time.... If I am not mistaken, it was after one of my "ravamps" of the phone... more specifically, I applied a reg edit so I coudl reprogram the PTT button... Any of the rest of you do this? I changed the PTT so on a short push it does Voice command, and long press it loads TomTom (in my mind, PTT is a french button "Pour TomTom" lol).. Anyways... Let me know folks
Stock ROM. Same problem.
I think the problem is in "device lock" plugin on today screen.
After I disabled that plugin and stopped using it- it stopped to flash the screen.
Is it the same with other devices?
I've never used the device lock today plugin and I have always had this issue. 6.1 stock rom.
hi, i tried a search but i couldnt find much info about it so im going to mention it here
sometimes when i turn on my diamond with the power button it wouldnt turn on but the backlight lights up, screen is blank and none of the buttons respond until i suspend it again and power it up a few times before i can get a normal looking screen and regain functionality
im wondering what can be the issue or i have a dud device
im using dutty's latest rom
I have had this problem too but only after using tomtom... It seems to render the power button inoperative.
for me this happens any time with or without tomtom and what worst is that my sound dies completely
I did not have any problems with mine. Its probably the rom ur using mate =/