How to prevent Diamond to establish Data Connection? - Touch Diamond, MDA Compact IV General

I'm running the original factory/stock ROM (WM 6.1) on my Diamond and recently Diamond has had a tendency to establish a data connection (GPRS; EDGHE; 3G; HSDPA) by itself.
This happens regularly, even if you try to switch it off, the session is up again after a while. I really wonder, because there shouldn't be any kind of applications whatsoever running that would raise the connection, even though I doubt if it might have something to do with the automatical check of new e-mail messages by the WM/TouchFlo's own e-mail software?
Such issue is quite annoying and expensive if one doesn't have unlimited data subscription.
Anyone with some solution(s)?
Thank You in advance!

Look for a program called NoData, Should be on these forums somewhere

Thank you Ian! NoData seems to work very well!
Problem solved.

No worries

Uncheck the auto updates e.g. weather, qgps, anything. And/or delete internet connection settings. I don't use any extra progs and my Diamond is always offline and doesn't even try to connect.

Related

Connection management (newbie question)

Hi all,
I don't get to spend much time with my device or surfing the net for handy little apps so I am forced to ask this probably simple/stupid question to you people in the know.
Is there a way to configure my Vodafone UK v1615 to dynamically swap between "My Work" and "My ISP" network settings so that when I leave my wireless network the device automatically knows to dial up a 3G/HSDPA connection and use that if I open something like IE?
Or should I be configuring this somewhere else, like in the applications themselves (i.e. If WiFi unavailable use 3G)?
If anyone knows of a nice (idiot proof) guide to setting up the connections on a WM6 device that'd do to save you having to type out your own long winded instructions.
Thanks in advance for all the help offered.
[MaccA]
Hi Macca,
I've not found a way to do this yet on mine, it is something I think WM6 lacks compared to Symbian. I still find it pretty simple just to hit the Fn key and then OK on the QWERTY keyboard as this switches WiFi on and off.
Something I found useful on the subject of data is the counter software you'll find on the TomTom CD that came with the phone. It gives you daily data usage, really handy for keeping check!
Have a nice evening,
edwardpeter
Hi Ed,
thanks for the tip on turning the WiFi on and off, that'll save some time!
However, if I turn WiFi off and continue trying to surf, instead of my device making a 3G data connection it just gives me a "Cannot Connect" error, check your connection settings blah blah.
I'm sure this means I've just got my device configured incorrectly because I cant believe such simple functionality isn't available... (what am I say? This is MS we're talking about!)
Can anyone shed some light on how much configuration should be to allow my phone to switch from WiFi to 3G with out reconfiguration?
Many thanks
[MaccA]
I seem to be having the opposite of this problem. My device seems to keep connecting to a 3G network by itself whilst it is already connected to a Wi-fi network. it is getting on my nerves now. I am looking for a way to stop the 3g from coming on at all, or at least ask me before connecting to 3g.
I dont get much data in my monthly plan from vodafone and dont want it getting chewed up whilst i am sitting at home with a wi-fi connection.
Bump.
Can anyone help me with this connection confusion?
Many thanks
[MaccA]
Hi,
I would also like to be able to connect to my preferred network everytime I turn on the wireless rather than having to configure it everytime. Additionally, even when I am connected and because the signal is poor, it keeps disconnecting, which requires manual connection all the time. In my laptop, although the signal is poor, it never disconnects, it just grinds it out, and keeps working. Or, my expectations are very high for this phone. Can anyone help?
Thanks from a noob.

Why does GPRS want to connect?

Hello,
on my Diamond, I have e-mail receiving set to "manually" and both weather downloading options unchecked. However, very often, the phone tries to connect to GPRS without asking me for permission. Few days ago, I was playing with my phone, what caused turning off NoData (I dunno why - I have neither turned the Internet profile to "enable" in its settings nor uninstalled NoData). A few moments later, I was VERY suprised to see that.. phone was connected to the GPRS for over 40 minutes! I thought that it'd make my bill like $50 higher. However, it raised my bill for only ~$0,5. I have no idea neither why did it connect nor what did it wanted to do with GPRS connection. Do you have such problems either? What's the matter? How can I fix this so my phone won't want to connect without my demand? Thanks in advance.
NoData should be enough, but I don't know why it reset to enabled if you didn't do this yourself? That said, all it does is toggle some registry settings so perhaps one of the other 'tweak' apps (have you got any installed?) reset the settings...?
Mathew
Yeah, I think that other tweaking apps could make it - that was my first thought. I have Diamond Tweak and Advanced Config installed and I was playing with them, so they could change the settings. My problem though is not to make Diamond unable to connect GPRS - because NoData does everything I want in that matter. I want to know why Diamond wants to connect, while forecast and e-mails checking are off. It'd be great to know that, because maybe then it'd be possible to be sure that (even without NoData) Diamond wouldn't connect to the Internet when we don't want it to do it.
With gprs it's all about the traffic.. the more you download, the more you pay.. I deleted the settings, so it can't connect, even when it wants to.. Only use wifi anyway..
U can enable NoData, but I think it's still possible to manually turn on the connection. NoData won't work then, unless you re-enable and softreset..
djind - oh man, I know how does GPRS work and what do I pay for..
I'll repeat once again, cause I think not everyone got this right. I want to know, WHY does Diamond want to connect to GPRS if it DOESN'T want to download forecast or e-mails. I'd love to have no situations with Diamond trying to connect - without NoData, without deleting settings. Just NO CONNECTING without my CLEAR DEMAND.
Then, please tell me what can make my Diamond want to connect.
You said u were playing around, so opening a page or checking and immediately unchecking weather download or any program using gprs would trigger the connection.. or mayme by accident pressed something..
It's done like that to increase your phone company's income
How about disabling the gprs auto-attachment option found in diamindtweak (or was it advanced config)
Just delete the setting if nothing work, and use wifi...
I actually have unlimited 3G service, so i don't really care if it stayed connected or not (and battery is not really a issue for me..)
djind said:
How about disabling the gprs auto-attachment option found in diamindtweak (or was it advanced config)
Click to expand...
Click to collapse
That's not going to help in this instance. Disabling auto-attachment merely stops the phone resgistering itself as a GPRS-enabled device with the network until it actually requires a data connection to be established. Hence, as soon as the OP's 'rogue app' requests a connection it will get one.
Tigrowski, sorry for the confusion - I was specifically answering your question of how to stop the phone connecting without your demand. I am not aware of an app that could identify this rogue app, but perhaps if you find a packet sniffer that'd give you some clues (i.e. from where the traffic is going, ports etc and, if using cleartext ASCII the actual data being sent).
All said and done though, I think you'd be better of just relying on NoData to put the barrier up as even when you've identified the rogue app you might not be able to make it behave. Besides which there'll likely be another one round the corner wanting to connect when it feels like it! (that was one of the reasons behind why NoData was developed, particularly for roaming users given the significant financial impact of out-of-control network-enabled apps)
Mathew
P.S. It's not QuickGPS periodically downloading almanac data is it? (check the setting as this can be controlled, although it should only be doing so weekly anyway)

detecting programs initiating data connection

Hi,
I'm looking for a soft that would detect and identify which programs (softwares or other) initiate data connections on my kaiser.
I disabled all data-retrieving options on the different softs I have (weather,time,...), but it still connects without my wanting !
Anyone knows something that would do that ?
Thanks.
Good question and I too would be interested in the answer. Mine started doing this a few days ago and has since stopped again!
Activesync and MMS messaging
Both of these programs will switch on your data connection. I changed my mms settings to reject and changed my data connection to my work network to keep it from using data. That worked for me until I added unlimited data to my plan.
Spb Wireless Monitor does a great job at this. It isn't free, but I like it. I have it set as a Today Screen plugin to only show my MediaNet connection, but it can also show USB and wifi data usage. It will give you reports on what's using data, how much it's used, and when it was used. You can also set it to alert you before you go over your limit. It's at http://www.spbsoftwarehouse.com/products/wirelessmonitor/?en
Indeed, SPB wireless monitor is great.
I was looking exactly for the same sort of solution, since after reinstalling some apps I was having too large GPRS data loads.

problems with TD 2, pls help

hello,
I have just purchased the new TD 2, it is the first phone of this kind that I use (up till now I have only used Nokia Business phones)
Although I considered myself a person that knows his way around how to use a mobile phone, I was surprised to actually be forced to read the manual for the HTC TD2 - unfortunately the information in the manual is general and did not help me at all...
ok so here are the problems I hit:
1. For internet access I have activated "Vodafone Live!" packet with my network (Vodafone) - (internet works fine with no probs)
However, whenever I am near a Wi-Fi zone I would like to use that Wi-Fi signal to connect to the internet and NOT my "Vodafone Live!" setting.
I could find NO way to select how to use Wi-Fi and not the other preset network. (As far as I can see the phone still uses Vodafone Live! and not the Wi-Fi, although I previously manually connected to the Wi-Fi and I tested on my other phone that it is working...)
2. With my other business phone (nokia) whenever I stop using the internet page the phone disconnects (the 2 arrows disappear) but with TD2 I have the impression that even when I exit from Opera or IE the phone still remains connected somehow to the internet - how can I make it disconnect and not use the battery for no reason ?
The only way I found to manually disconnect it is going to START / Settings / Communications / the Push Data Connection button to OFF.
Is there any automatic way to do that whenever I quit the browser?
Thank you in advance for u`r help
ahile said:
hello,
I have just purchased the new TD 2, it is the first phone of this kind that I use (up till now I have only used Nokia Business phones)
Although I considered myself a person that knows his way around how to use a mobile phone, I was surprised to actually be forced to read the manual for the HTC TD2 - unfortunately the information in the manual is general and did not help me at all...
ok so here are the problems I hit:
1. For internet access I have activated "Vodafone Live!" packet with my network (Vodafone) - (internet works fine with no probs)
However, whenever I am near a Wi-Fi zone I would like to use that Wi-Fi signal to connect to the internet and NOT my "Vodafone Live!" setting.
I could find NO way to select how to use Wi-Fi and not the other preset network. (As far as I can see the phone still uses Vodafone Live! and not the Wi-Fi, although I previously manually connected to the Wi-Fi and I tested on my other phone that it is working...)
Click to expand...
Click to collapse
The Touch Diamond 2 will use an active WIFI connection over your Vodafone Live! connection. If you are wanting to connect to a Public WIFI zone, then simply select the WIFI connection that you want from you list on the "Connect to Wi-Fi network" screen.
ahile said:
2. With my other business phone (nokia) whenever I stop using the internet page the phone disconnects (the 2 arrows disappear) but with TD2 I have the impression that even when I exit from Opera or IE the phone still remains connected somehow to the internet - how can I make it disconnect and not use the battery for no reason ?
The only way I found to manually disconnect it is going to START / Settings / Communications / the Push Data Connection button to OFF.
Is there any automatic way to do that whenever I quit the browser?
Thank you in advance for u`r help
Click to expand...
Click to collapse
If this really bothers you there are applications dotted around here on XDA devs that will automaticaly disconnect your internet connection after a preset amount of time. That said though, just because the TD2 has a connection to the internet, does not mean that it is transmitting any data and does not use up any of your internet allowance and also it will not drain your battery that much.
Thank you very much for the explanations and u`r time!
Regarding the first problem above that is good news, although I don’t like it that I don’t have full control over it.
for example I’m going abroad next week for 10 days and I rly don’t want to use the Vodafone live! option as it will cost as hell
an option where I could be prompted and asked if I want it enabled or not - would have been great...
guess ill just delete it from the connections tab and reinstall it when I get back in my country - seems to be the only safe option.
One more thing,
Whenever I try to access a video-clip over the internet (using the IE not the Opera) the phone automatically directs to the program STREAMING VIDEOS program)
And here the clip ONLY works if I select to connect over “THE INTERNET” – why ??
For example if I go to Streaming Videos / Networks, I can find the following:
Vodafone Live!
Vodafone MMS
Mobile internet
My Work Network
My ISP
Work
Secure Wap Network
The Wap Network
The internet
What the heck are all those ??? I only know of “Vodafone Live!” - and the straming video does not work when I select it … it only works when I select THE internet (like I said above)
Ah, if you are going abroad or just anywhere that you don't want to use Vodafone Live!, there is a little application called "NoData" which allows you to toggle your data connections on/off.
Will edit this post once I find where it is again.
[edit] Here it is:
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
[/edit]
As for streaming videos, I've never used it so can't say.
Graffen said:
Ah, if you are going abroad or just anywhere that you don't want to use Vodafone Live!, there is a little application called "NoData" which allows you to toggle your data connections on/off.
Will edit this post once I find where it is again.
[edit] Here it is:
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/
[/edit]
As for streaming videos, I've never used it so can't say.
Click to expand...
Click to collapse
Indeed, NoData is a handy tool.
What you can also use is the following one found on XDA-devs:
http://forum.xda-developers.com/showthread.php?t=503131
It will automatically turn off your data connection when you're not on your standard network.
It isn't perfect, but it works well and the developer is really listening to all suggestions and very active.
you guys are a pice of heaven
thank you again for all u`r help
question, this program NoData, also stops Wi-Fi data transfers or just network ?
thank you
NoData will only stop phone network connections. You will be able to use wifi as normal.

Navigation software opening systematicly GPRS internet connection !?

Hi,
I use iGo8 and TomTom 7 and with both of these applications, everytime I close them I can see that they openend the GPRS connection (internet mobile)... my internet has no limit of use so it's not much of a money issue but the battery is going down pretty fast beacause of this background running data connection ...
Is there something I could do ?
Install nodata.cab from modaco
prdic said:
Install nodata.cab from modaco
Click to expand...
Click to collapse
Thanks for the reply. I tested the software you pointed out. It's a solution except that its pretty boaring to have to lock the internet connection everytime you need to use the GPS (for it's 15 to 20 times a day with a new adress) ...
Any idea on how to disable the connection only for the GPS software ?
EDIT : even with all connections disabled with nodata, the gsp still manages to open the connection !
I had exactly the same problem. I tried the same cab as you and it didn't work... I tired creating a bogus connection and selected it to try and stop the GPRS connection as someone else advised but a GPRS connection kept on opening itself...
Do what I did and flash a stock HTC ROM over your SFR one... It completely solved the problem for me.
You might want to dump the old SFR one first for guarantee reasons.
I use igo8 and it never turns on the GPRS connection.
I don't know if this is the cause, but can you check if assist GPS is ON or OFF?
Mine is OFF which is the default behavior...
If you don't have it, you'll need an app like "Advanced Config" in order to be able to see and change the A-GPS behavior
--Double post--- Ignore
This was the problem ideed. I have direct access to the A-GPS ON/OFF option in the parameters and it was ON. Switched it to OFF and the navigation software don't start the data connection now !
Thanks !

Categories

Resources