I have been struggling with BB Connect on all the 6.5 ROMs. I saw in other forums i.e. Raphael etc that people have made it work.
Can anyone please help me in getting it to work?
Someone please help! I really need this badly and don't want to go back to 6.1
I have tried Itje's new ROm and Jerplea's X2 ROM.
The service connects, shows " Data tunnel available" and then Not connected.
Related
I've made a backup with REsco backup, then upgraded my Kaiser to WM 6.1 (italian) got from HTC club.
After flashing, i've restored the backup.
Now everything is ok but the wireless connection. My kaiser wont find any wireless anymore.
Do i have to go back to 6.0? Or i can flash another ROM, maybe a cooked one to get rid of my problem?
I'm fairly new to cooked roms, so i'm also asking to you wich one, of those developed in the forum, is the preferred with most features? I prefer italian ones, but i've no problem with english.
Thanks
try changing the channels. after updating to 6.1 (official, english)i had to change from channel 6 to 11 for his highness the kaiser to find my wireless network.
there could also be other reasons, but for me this helped
The problem is... that i can't find a way to change the channel. The Kaiser isn't finding any wifi network even outside my home, where i know there are dozens of wifi networks.
The signal stay at 0
The SSID, BSSID, TX speed, TX speed are emtpy. Mode = Infrastructure, Channel = 11
all textboxes are not editable
maybe this can help you...
but you need pocket rar to use it so install that as well
Paglioni said:
I've made a backup with REsco backup, then upgraded my Kaiser to WM 6.1 (italian) got from HTC club.
After flashing, i've restored the backup.
Click to expand...
Click to collapse
If the backup you made was from a Windows Mobile 6.0 installation then that's a problem. That backup should only be used to restore a 6.0 installation otherwise you get problems.
FWIW my WM 6.1 (stock) installation WiFi is working fine - it's GPS thats gone to the pack with this official HTC upgrade.
My suggestion is to do a hard reset, then configure your WiFi and get it working. Then install all your programs from their original cabs - testing after each one to make sure no one program breaks WiFi.
Hi,
after searching xda-developers and googling I finally mannaged to get Voip working with the wm6 builtin voipclient.
I can make calls over wifi without a problem, sound through the phonespeaker and I managed to get my voipclient connected over 3G...
But Noone can hear me when I make a call over 3G and I can't hear them either...
Anyone got this to work?
I tried duttys roms an the hyperdragon roms (which I find great) I alo tried different radio roms without succes.
Thanks in advance,
Bartus
could you please tell me which voipclient you are using so I can try it .
The one from this tread: http://forum.xda-developers.com/showthread.php?t=326432&highlight=VOIP&page=5
I'l attach it so you don't have to search that thread, but you may want to read it anyway
hmm 227 views and no one can tell me if it is possible to get ths to work on the kaiser?
destr0_VOIP_WM61___SIP_Config_1.1.CAB works for me in the US with ATT. I also have skype beta for WM 6.1 working as well. You can find it in AllTheWay or Ptater's 4shared cab collection... (in their sig & the Read here 1st post)
I used Skype on 3G with Dutty's roms. I haven't been able to use it with NATF's V2 rom. I just upgraded to the V5 rom and I'm going to try that.
surely the problem lies with the network protection controls in place to stop you making voip calls on your data plan?
thats the case here in the UK
I would say that is probably a correct answer, failing that, it could be some problem with sip through nat, or some other such issue that can often arrise using the sip protocol. There are often sip problems through nat networks, hence the need for STUN.
I recently flashed my phone to Dutty's dual touch 6.1 rom (from hyperdragon 3) and ever since i did phone calls have been a bit hit & miss. Ill ring someone and they wont be able to hear me, or ill ring someone and from the minute it ''connects'' i get a sort of staticy noise even after i hang up. Only way to get rid of it is to do a soft reset.
Am i right in thinking this is probably to do with the radio being miss matched? never had the problem before so just wanted to check it is before i started playing around with it.
if it is the radio, is it just a matter of hunting around for a new radio that goes with duttys ROM & flashing it in a similar way to flashing a new rom?
thanks guys
========================
MOD EDIT:
Please refrain from creating multiple posts about same topics. This is against xda forum rules. I have merged both of your threads together.
i also struggle to connect to any wifi networks. iv reflashed Dutty's latest 6.1 ROM (dual touch afaik) but it still has problems. I always thought dutty's Rom came with their own radio?
thanks guys
Wifi - unable to connect?
Last few days iv struggled to conect to any wifi network. When i select the network and try and connect the phone just sits there ''connecting'' until it tells me its unavaliable. iv tried on 2 different networks, both which have worked in the past.
It started when i flashed to Hyperdragon III ROM, then reflashing two of Dutty's ROM (latest 6.1 and dual touch) still hasnt sorted the problem.
Iv tried searching and couldnt find anything, and im getting a tad desperate tbh. I thought it could have been a problem with the radio, but both of duttys ROM come with their own radios and they have worked for me in the past.
This is a clean install, on Duttys latest 6.1 ROM and im lost for ideas!
Can anyone offer any advice? cheers guys
Hi guys,
I am highly interested on the Xperia X1, but to use it for business I am stuck to Blackberry. I always had Windows Mobile devices and not to loose the flexibility, I was hoping to get an Xperia with BB Connect working.
So far I read until now, the BB Connect SW is not able to get a PIN on the X1. So my question to ROM cookers, is this an issue that is solvable by a cooked ROM?
Thanks for the feedback!
hi there,
I have a Blue Angel running stable on WM6 (CE OS 5.2.1933) and i'm having problems with my bluetooth GPS.
I can pair them , even running for a while with TomTom 7.916, after i close the program and try to reopen it, my bluetooth connection is lost...
I tried all the advised settings, but none work permanently.
I can't even check if my GPS device is still connected.
Never had this problem with WM2003....
Can anyone help please?
hi and welcome to the forum.
there are already threads that discuss this topic and although the solutions don't seem to work for everyone, i guess it could help you further.
one of those threads is to be found here: http://forum.xda-developers.com/showthread.php?t=476940
if nothing of that helps, you might want to change to rom, d-two for instance improved the gps support and his roms tend to work better with BT GPS. you can find all the recent roms in my thread in my signature (the "read first" one)
bluetooth connection
Thanx Chef
I've read almost all threats on this, but there is one thing i don't get.
In WM2003 you had to connect manually to a device if you wanted to use it's service, you then knew that the connection was there. In WM5 or later you only can assume that the connection is active sinds there is no option to connect to a device other then making a new connection. When i disconnect from my GPS I cannot connect to it again afterwards.
many thanx, I'll try your ROM tonight
Greetings