Hi.
Hope i post this in the right sub forum...
I have a bluetooth keyboard connected to my Topaz to be able to write sms faster
Im using Duttys Holy Grail R6 SWE version rom.
The problem i have is whatever i try i cant get the keyboard layout on my bluetooth keyboard to Swedish, it just uses the English layout.
The bluetooth keyboard is a KeySonic ACK-340 BT.
I can mention that if i try to connect it to my desktop pc its also using English layout. But there is Swedish letters on the physical keyboard.
Anyone have any ideas?
Update: With pc it works good...
I got it work with my desktop pc, (had wrong layout on keyboard there)...
But whatever i try, i cant get it to work on my phone (it always is English layout).
I have the same problem, but haven't found any solution.
Maybe the best solution is to buy a keyboard with english layout instead?
But how to write in swedish on an eng kayboard then
We really need the ability to change keyboard layout on BT-keyboards!!!!
Related
Hello,
is there any possibility to get a german keyboard for the Helmi WM5? I have a german BA (Vodafone VPA III) and i use my slide-out keyboard very often. I have no problem with an english wm5 but without a german keyboard layout is it useless for me.
Is there any way to get a german keyboard "driver" for the slide-out keyboard?
Install this cab and soft reset the device - you will have german keyboard layout
works perfectly. Thank you very much
U guys talking about the hardware keyboard or the soft keyboard?
princejimi said:
U guys talking about the hardware keyboard or the soft keyboard?
Click to expand...
Click to collapse
The Hardware "slide-Out" Keyboard
And is there a solution to switch the soft keyboard to German layout?
Yes, it's the same thing. I have similar patch done for wm2003se, it works fine. Thanks for this one for wm2005!
Installing the cab file only changed the slide-out keyboard layout. The soft keyboard remained unchanged.
Is there any other solution to change the layout?
Hi, the file fixed my hard- and software kb. Thnx a lot! But since i installed, the hw kb sometimes "holds the last key pressed"
It repeats that letter till i press another key. Anybody else has that problem?
Greetz Mad
Sorry Guys
my softkeyboard remained unchanged.
Hi, I have a Kaiser from UK and i want to use a spanish T9. Can someone help me do this without reflashing a new rom?
Thanks in advanced!!!!!!!1
is there t9 in qwerty keyboards?
as far as i know theres no t9 in qwerty keyboards except for word suggestions after you type a letter but you can activate that going into the menu good luck
That´s very easy. There are lots of freeware solutions!!! just search in this forum or:
Try the Original HTC phone pad (multilanguage) : http://www.gaehn.org/uploads/downloads/Dark_PhonePad_Int.zip
Or try the HTC KeyboardDual Multilanguage:
http://forum.xda-developers.com/showthread.php?t=344533
After installing one or both, go to Settings/Input, chose the keyboard and change in options the language!
Both are very good. I use them as well!
Or search with google for freeware!!!
Hi all, just got the diamond last week, damn its nice, just the battery life sucks.
I used to own a UK T-Mobile Mda 3, loved the calender as i change shifts a lot, was looking to replace it a few months back heard tell of the diamond so decided to wait.......however...
The sms full keyboard on my old MDA3 used to allow predictive words (t9 i think) but the diamond does not seem to, I like the keyboard layout over the qwerty or comapct qwerty as they both take up too much for the screen for my taste.
The t9 does not seem to work in the keybaord layout, i think i have all the settings correct, as it works in the other 2 setups but not keybaord.
also, is there a website that lists all the compatible 6.1 programs? not sure what i want, but more like teeter would be nice, or even a different sms prog that allows predictive text!!
Cheers
Lepak
lepaknerat said:
The sms full keyboard on my old MDA3 used to allow predictive words (t9 i think) but the diamond does not seem to, I like the keyboard layout over the qwerty or comapct qwerty as they both take up too much for the screen for my taste.
The t9 does not seem to work in the keybaord layout, i think i have all the settings correct, as it works in the other 2 setups but not keybaord.
Lepak
Click to expand...
Click to collapse
The same for me. T9 works only using qwerty layout. If you use keyboard layout predictive text doesn't work. Someone has an idea ? My rom is 1.37 from HTC official italian.
Thanks in advance
unvisigoth said:
The same for me. T9 works only using qwerty layout. If you use keyboard layout predictive text doesn't work. Someone has an idea ? My rom is 1.37 from HTC official italian.
Thanks in advance
Click to expand...
Click to collapse
Found it ! Thanks to newtonmj in modaco forum
You must chaange the registry key XT9SupportMSSip in HKLM\SOFTWARE\Tegic\eT9\ from '0' to '1'.
This allows the predictive text to work correctly in standard keyboard too.
I don't know if this mod can "damage" other settings but I don't think. It allows the predictive input to work using microsoft standard keyboard. In my device now works !
http://forum.xda-developers.com/showthread.php?t=412048
PocketCM Keyboard, VGA resolution
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=412048
PocketCM Keyboard, VGA resolution
Click to expand...
Click to collapse
Very nice. I think I'll try it. But I wanted that worked correctly standard keyboard without adding third part software. What is standard in my device MUST work correctly. Then perhaps I'll not use it, but this is another thing
I'm paranoic. But I can't accept that a phone worth about 500€ does't go in the appropriate way......
I have a Touch Pro that was bought with a French WM6. I update it with a original HTC English Rom update and everything works fine. I would only like to change the keyboard back (probably should have backed it up before I did Rom update) to azerty. Can anybody tell me how to do that for the hardware keyboard and the onscreen keyboard?
I tried the procedure that makes you change the register key but don't work for me.
I've seen some .cab files going around to make these changes for many other languages, does it also exist for Dutch (Belgian) of French (Belgian).
Thanks
Please ignore this thread
Will start a new one cause this is not accured anymore.
i don t know
i know just use BDR to change the value but i am not sure
I installed a ahmedkry's WM 6.5 ROM (WWE) and I've been trying to find a way to type greek characters using the software / hardware keyboard. I am not interested for greek ROM translation, greek menus, greek dictionaries etc. Just typing support as 2nd language (replacing the current ones: àáââäåæç).
I have already tried some registry key changes (HKCU/MUI/CurLang) to 0408 and software reset but it doesn't seem to work.
Any ideas?
Moved as not ROM Development.
Software keyboard kinda solved, by installing a 3rd-party keyboard (Zoomboard) which supports multiple languages.
However, I'm still looking for greek layout support for the hardware keyboard of TyTN II. If anyone has any ideas, feel free to share.
Thank you.
aggelosp said:
Software keyboard kinda solved, by installing a 3rd-party keyboard (Zoomboard) which supports multiple languages.
However, I'm still looking for greek layout support for the hardware keyboard of TyTN II. If anyone has any ideas, feel free to share.
Thank you.
Click to expand...
Click to collapse
Need it myself also...just updated to win 6.1.
AEKMap (h**p://ae.inc.ru/aekmap.php) or AE Keyboard Mapper should solve the problem for you. It maps external keyboards. There are preset greek layouts that you can download from the site. My Xperia X1 works that way.