G1 won't boot, can get to recovery and SPL - G1 Q&A, Help & Troubleshooting

Hey all, flashed a variety of ROMs and SPLs during the 12 month lifespan of my G1 with no problems.
This afternoon I updated to the Danger SPL from Haykuros sapphire googlecode page, and I updated to Amon_RA's recovery image. Both home+camera and home+back boot to where I would expect..
But the phone itself won't boot. Hangs on the G1 screen.
Any ideas all?
Thanks

Ok so I've tried booting without my SD card, and it still hangs:
http://forum.xda-developers.com/showthread.php?t=618577
I've also swapped back to the old Hard SPL which looks like so:
DREA110 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-2.22.19.26I
The ROM im using is "TheOfficial DONUT TMO US/EU, ADP & AOSP" :
http://forum.xda-developers.com/showthread.php?t=538456

I'm starting to think that the ext partition on my SD card (cheap transcend which came with the G1) is foowked.
Whenever I run any kind of nandroid stuff, it fails.
Tried a variety of SPL/recovery combinations (ie, the ones I had this morning) and no love. Even a wipe or three makes no difference.
Perhaps I should just reconfigure the SD card and update to manup's build.

Have you tried reformatting the card and not partation the card after you flash a rom?

LFC
So I've updated to Danger SPL, wiped and partitioned using AmonRA's recovery.
And it worked!
Thanks to ilostchild and mafro for responding to my problems. I love you all xda-dev!

mafro said:
So I've updated to Danger SPL, wiped and partitioned using AmonRA's recovery.
And it worked!
Thanks to ilostchild and mafro for responding to my problems. I love you all xda-dev!
Click to expand...
Click to collapse
LOL you thanked yourself.

mafro said:
So I've updated to Danger SPL, wiped and partitioned using AmonRA's recovery.
And it worked!
Thanks to ilostchild and mafro for responding to my problems. I love you all xda-dev!
Click to expand...
Click to collapse
I think you're being just a little bit conceited

JAguirre1231 said:
I think you're being just a little bit conceited
Click to expand...
Click to collapse
I was just having a little joke there.. Or maybe you were being sarcastic?

mafro said:
I was just having a little joke there.. Or on second read, maybe you were being sarcastic?
Click to expand...
Click to collapse
Yes, I was. Obviously you didn't see my signature.... unless you looked at it after typing.

I'm Guessing your mom is the size of a valid city

mafro said:
I'm Guessing your mom is the size of a valid city
Click to expand...
Click to collapse
Yours is a little bigger, but yeah.

Related

Advantages of 1.33.2005?

I'm wondering if there are any advantages to having the Haykuro SPL 1.33.2005
I've done some research and found out how to flash it(yes I have PVT), but not much information on if its worth risking it. I know it would allow me to run Hero and whatnot and Cyanogens?
xsnipuhx said:
I'm wondering if there are any advantages to having the Haykuro SPL 1.33.2005
I've done some research and found out how to flash it(yes I have PVT), but not much information on if its worth risking it. I know it would allow me to run Hero and whatnot and Cyanogens?
Click to expand...
Click to collapse
You can run Cyan on HardSPL or even the stock SPL. You only need the Haykuro SPL for more internal storage space for the OS in the phone, which allows for bigger ROMs to be used. It will also give you adequate space for whatever you may want on your phones internal memory
Well I am running HardSPL atm, but Hero kind of intrigues me and I wouldnt mind trying it out. But if really doesn't help out that much, I guess I'm going to stick with my setup right now. ty B-man0007
Its not a big risk. If you have everything done correctly, it should work without a hitch, I've had to install it twice because I've had to re-root my phone once after flashing RC29. Its no big deal really. You only read more of the one with broken phones cuz they're the only ones who say anything. The vast majority of people who do not brick their phones just don't announce it so publicly, but if you look at most people's sigs, you'll see that they also have Haykuro's SPL.
h.nocturna said:
Its not a big risk. If you have everything done correctly, it should work without a hitch, I've had to install it twice because I've had to re-root my phone once after flashing RC29. Its no big deal really. You only read more of the one with broken phones cuz they're the only ones who say anything. The vast majority of people who do not brick their phones just don't announce it so publicly, but if you look at most people's sigs, you'll see that they also have Haykuro's SPL.
Click to expand...
Click to collapse
I thought if you tryed to downgrade from this SPL that it would brick your phone? and about the sig thing, yes I have noticed that as well, and I kind of want to jump on that boat.
xsnipuhx said:
I thought if you tryed to downgrade from this SPL that it would brick your phone? and about the sig thing, yes I have noticed that as well, and I kind of want to jump on that boat.
Click to expand...
Click to collapse
Its only if you downgrade the radio that a brick could occur (not sure how upgrades will affect it, which is why I haven't upgraded yet lol)
B-man007 said:
Its only if you downgrade the radio that a brick could occur (not sure how upgrades will affect it, which is why I haven't upgraded yet lol)
Click to expand...
Click to collapse
You sir make a good point, I think I'll be staying at the HardSPL then.
If you flash RC29, it replaces your radio and SPL so it doesn't brick your phone. From there you merely reflash the radio, then the SPL. Not sure about radio upgrades... I don't even see a radio thread that most other phones have, which is why I'm not so worried about upgrading radios, I've stuck with this radio for... months, which is longer than I've ever stuck with a radio on my Touch Diamond. Still, its your choice, but... TouchFLO is very pretty...
h.nocturna said:
If you flash RC29, it replaces your radio and SPL so it doesn't brick your phone. From there you merely reflash the radio, then the SPL. Not sure about radio upgrades... I don't even see a radio thread that most other phones have, which is why I'm not so worried about upgrading radios, I've stuck with this radio for... months, which is longer than I've ever stuck with a radio on my Touch Diamond. Still, its your choice, but... TouchFLO is very pretty...
Click to expand...
Click to collapse
Stop teasing me!! lol Let's see how much money I win at poker tonight and that will decide
Haykuro's SPL is my favorite, because all that extra space makes things run much faster, on top of giving more room to Cache's if you have Apps2SD. Big time themes also fit onto it, and if you follow instructions closely, should have no problem installing it.
xsnipuhx said:
Stop teasing me!! lol Let's see how much money I win at poker tonight and that will decide
Click to expand...
Click to collapse
I only tease you because I'm helping you. Once you go JACHero, you don't go back... its just so pretty... *drools*... Unless you're a speed demon freak in which case, as lurk said above me, also speeds up your phone when you use Cyanogens
h.nocturna said:
I only tease you because I'm helping you. Once you go JACHero, you don't go back... its just so pretty... *drools*... Unless you're a speed demon freak in which case, as lurk said above me, also speeds up your phone when you use Cyanogens
Click to expand...
Click to collapse
I've NEVER been able to get any JacHERO build to go anywhere near fast...which is a bummer, it definitely is very pretty . It should speed up your phone for any matter, just because of the extra room. It's like RAM on your computer; the more you have of it, the more space there is to use and make things faster!
lukekirstein said:
I've NEVER been able to get any JacHERO build to go anywhere near fast...which is a bummer, it definitely is very pretty . It should speed up your phone for any matter, just because of the extra room. It's like RAM on your computer; the more you have of it, the more space there is to use and make things faster!
Click to expand...
Click to collapse
I'm running JacHero 2.5 w/o Rosie and my friend is using Cy and he was the one that pointed out myne may be even faster and he on Cy 3.6.7.2. That was from his mouth not mine. Not to mention There's now a go around to make sure you get EVERY text message on Hero so you never have to miss another one again
so if i was to flash the danger SPL with what im running right now, i have the 261 radio, it wont brick? then i will have to reflash my cyanogens right? and just out of curisoity i know the rom doesnt need swap but does the spl?
xsnipuhx said:
so if i was to flash the danger SPL with what im running right now, i have the 261 radio, it wont brick? then i will have to reflash my cyanogens right? and just out of curisoity i know the rom doesnt need swap but does the spl?
Click to expand...
Click to collapse
If you have the new radio and a PVT board you should be fine. Boot up holding camera and power and check if you have a PVT board. The new spl allows you to install roms like Rogers, Hero and the Sapphire. So unless you want to change from cupcake builds you will be fine without it, but it is nice to have. So yeah just make sure you have the new radio and you will need to reflash your current build afterwards. Good luck!
AdrianK said:
If you have the new radio and a PVT board you should be fine. Boot up holding camera and power and check if you have a PVT board. The new spl allows you to install roms like Rogers, Hero and the Sapphire. So unless you want to change from cupcake builds you will be fine without it, but it is nice to have. So yeah just make sure you have the new radio and you will need to reflash your current build afterwards. Good luck!
Click to expand...
Click to collapse
Yep I do have the PVT board, so I know I should be good with everything, ill just read the Fix the SPL thread or how to install in jacheros thread. and if anything happens....well GG OTA update yesterday?
you can still brick your phone even if you do everything right
xsnipuhx said:
Yep I do have the PVT board, so I know I should be good with everything, ill just read the Fix the SPL thread or how to install in jacheros thread. and if anything happens....well GG OTA update yesterday?
Click to expand...
Click to collapse
It's hard to say how much risk there really is, but Cyanogen bricked his replacement phone trying to flash the "Danger" SPL about an hour after unboxing it and um, the guy knows what he's doing, you know?
I flashed it within a couple hours after Haykuro first posted it and luckily didn't have a problem, but if I had waited until everyone started bricking I might not have been so eager. It's definitely a roll of the dice, but that's part of the fun, right?
I'm actually in the middle of backing up my SD card and setting up another SD card with the SPL update on it then I'm going to flash it. put the cyanogen rom on my partitioned card and hope everything goes smooth, ill report back when I'm done. Anyone know how to flash my EXT2 partition so i can start fresh?
ei8htohms said:
It's hard to say how much risk there really is, but Cyanogen bricked his replacement phone trying to flash the "Danger" SPL about an hour after unboxing it and um, the guy knows what he's doing, you know?
I flashed it within a couple hours after Haykuro first posted it and luckily didn't have a problem, but if I had waited until everyone started bricking I might not have been so eager. It's definitely a roll of the dice, but that's part of the fun, right?
Click to expand...
Click to collapse
haha ya as soon as i heard cyan bricked it i wouldn't touch the dangerspl. thats when i stopped reading all the threads to insure i didn't get a brick lol
but he did flash the dangerspl after people said that it wouldnt flash with his recovery just to test it... so theirs still a chance i might do it lol
please note that there are apparently different versions of the 26I radio. Make sure you flash the one haykuro posted for safetys sake
Should I wipe before I flash the Radio and stuff from haykuros google page?

How to get something like app2sd without rooting your phone?

Can this be done if so how?
nope. root only.
kusotare said:
nope. root only.
Click to expand...
Click to collapse
Like he said, its just not possible. The things that need to be modified reside on root-only access folders. So without root access, we aren't allowed to touch these directories and files required to move everything to the sdcard. Its one the incentives of rooting your phone.
sillyshy said:
Can this be done if so how?
Click to expand...
Click to collapse
Just ROOT, its super easy great vid on youtube its a 3 part series check it out: http://www.youtube.com/watch?v=m9Aff5DXBBw
its totally worth it
why wouldn't you want root? just wondering
Looks hard
Its not hard at all. infact its rather simple . just read and re-read the guides and if all else fails watch the videos.
sillyshy said:
Looks hard
Click to expand...
Click to collapse
Perfect guide by Koush
Rooted my phone and a friends in a couple of minutes
Cake
Thanks for the guide. Question is instead of using JF's build how would I modife the guide to install [ROM]*New 1.76.61.3 build* Drizzy's Touchflo3D Hero - v2.5 "July/27 *5:17pm*"
I was using the instructions from the youtube video provided to me earlyer with download.
sillyshy said:
Thanks for the guide. Question is instead of using JF's build how would I modife the guide to install [ROM]*New 1.76.61.3 build* Drizzy's Touchflo3D Hero - v2.5 "July/27 *5:17pm*"
I was using the instructions from the youtube video provided to me earlyer with download.
Click to expand...
Click to collapse
Instead of throwing JF's on your card as update.zip just put the hero 3d on as update.zip and flash. Have to make sure to have the new spl and new radio if your going to do any hero build. And read drizzy's page to see the requirements for setting up your sd card. Easy stuff.
Is the spl and radio all the same from any source?
sillyshy said:
Is the spl and radio all the same from any source?
Click to expand...
Click to collapse
No. To find your radio and spl power on your phone using cam + power.
supremeteam256 said:
No. To find your radio and spl power on your phone using cam + power.
Click to expand...
Click to collapse
mine is radio 1.22.12.29
DREA100 PVT 32B
CPLD-4
September 2 2008
sillyshy said:
mine is radio 1.22.12.29
DREA100 PVT 32B
CPLD-4
September 2 2008
Click to expand...
Click to collapse
You need the new radio and spl to load hero.
http://code.google.com/p/sapphire-port-dream/
Here is the radio and new spl. If your going to do this make sure you FLASH RADIO FIRST and then spl, otherwise you'll end up with a paperweight. After you flash the spl you phone will stay stuck at g1 screen. You will then need to take your card out and put it in a card reader and load up your rom and flash and you done.
honestly man, if your rooting/flashing for the first time, i would go with a stable build for a little while that you wont have to partition, linux-swap, etc. at least for a little while just to get used to it...
i know hero is tempting and the devs have done an AMAZING job of optimizing the hell out of it. but if you looked at the threads to root and thought that was tricky then just get used to it for a while before moving to non-stable/experimental type roms.

Before I hack....

I just have one question before i start hacking. I have a 4gb card, but im about to get a 16gb card soon. You think I should wait until i get the 16gb card and hack it??? And would the phone still be rooted if I were 2 change the memory sticks??? Would i have to partition the 16 gb card also??
Waiting is up to u. As for any memory card yes u should partition them. If u can get a class 6 card its faster so it will help reduce the lag. If u dnt wait it will be hard without unbuntu to pull the apps and dalvik off the partition
Also no if if u switch the sd after root u will not lose it.
Edit: I'm late.
ok, soo im going to wait. any recommended roms i should try???
try reading a how-to,
cynagon is usually the rom to go with,
i think there is a database of all the roms that compares them too
fleebailey33 said:
i think there is a database of all the roms that compares them too
Click to expand...
Click to collapse
androidspin build database
When I try to format the disk on my computer, it disconnects and it says "There is no disk in drive G, enter a disk and try again". Also, when i connect my G1 to my computer, it says "Scan and Fix", or "Continue without scanning" and when i try to Scan and fix, it also disconnects the G1. What seems to be the problem??
Can't i just format the card using a card reader, then move onto rooting it???
Tr1n1Jay said:
Can't i just format the card using a card reader, then move onto rooting it???
Click to expand...
Click to collapse
Just do it in windows with it inside your phone...
[EDIT:] Didn't read enough. Yes you should be able to use a card reader to format.
Ok, this is my last concern, and i will stop bugging you guys. Soo far, i've successfully rooted the phone, flashed the radio(it now says 2.22.19.26I), and i flashed SPL. Everything with the phone is fine. My question is, do i have to flash the radio and spl everytime i want to flash a rom??? or do i flash the spl and then flash the rom???
never mind guys. im officially running cyanogen on the phone. looks good soo far. thanks 4 all the help
Tr1n1Jay said:
Ok, this is my last concern, and i will stop bugging you guys. Soo far, i've successfully rooted the phone, flashed the radio(it now says 2.22.19.26I), and i flashed SPL. Everything with the phone is fine. My question is, do i have to flash the radio and spl everytime i want to flash a rom??? or do i flash the spl and then flash the rom???
Click to expand...
Click to collapse
No dude lol
Tr1n1Jay said:
Ok, this is my last concern, and i will stop bugging you guys. Soo far, i've successfully rooted the phone, flashed the radio(it now says 2.22.19.26I), and i flashed SPL. Everything with the phone is fine. My question is, do i have to flash the radio and spl everytime i want to flash a rom??? or do i flash the spl and then flash the rom???
Click to expand...
Click to collapse
If you've already flashed the Radio/Spl, then all's you need to concern yourself with is roms, since the Radio/Spl stay even after the recovery alt w. You are done flashing the Radio/Spl, until Donut?
xsnipuhx said:
If you've already flashed the Radio/Spl, then all's you need to concern yourself with is roms, since the Radio/Spl stay even after the recovery alt w. You are done flashing the Radio/Spl, until Donut?
Click to expand...
Click to collapse
Uhhhh, I'm not sure. What's supposed to be special about Donut anyway??? Hero has Donut, right???
Tr1n1Jay said:
Uhhhh, I'm not sure. What's supposed to be special about Donut anyway??? Hero has Donut, right???
Click to expand...
Click to collapse
no hero is HTC based. donut is the official google update (not complete yet, but features are coming through)

:( Random Problem......Help, Please! :(

Right then,
Already searched on this one and not yet seen a solution to my problem. I own a T-mobile G1 and my phone crashes after it has booted up, or will not boot up properly: either the T-mobile G1 screen stays on for 5-6 seconds then I get a black screen, or it boots up then freezes with a black screen, or it won't switch on at all.
I currently have:
T-Mobile G1 with Root
2.22.19.26I radio installed
1.33.2005 "Death" SPL installed
Amon_RA's RA-v1.2.3 recovery installed
MghtyMax "What a feeling" 1.9.1 Hero ROM installed
fat32, ext3 and linux-swap on class 6 8Gb sdcard
I can get to recovery (sometimes.....it doesn't always get that far) and fastboot, so hopefully it's not bricked. I have already tried wiping (ALT+W) and formatting the ext2 (from the option in RA's recovery menu and also via console); removing all the partitions and starting afresh recreating them (after removing them of course), and as I can get to recovery (sometimes) I have tried flashing a different ROM (SENSEhero 1.3.3 unthemed) but still get the same issue.
I have flashed quite a few ROMs recently and not had any issues, so any help on this one would be most appreciated!
matthenry87 said:
Check your SD Card. My buddy had the same "black screen" problem and I discovered his SD card was slightly popped out. I clicked it back in and boom. problem solved. For him at least!
Click to expand...
Click to collapse
I'll give it a go..........
Seems like it is a problem with the sd card. Removed it and plugged it into my pc via a card reader and it couldn't recognise the card. Amazon here we come! Thanks for the help!
Give us a logcat from ddms.bat.
Binary100100 said:
Give us a logcat from ddms.bat.
Click to expand...
Click to collapse
he already solved it....
Not again......
B-man007 said:
he already solved it....
Click to expand...
Click to collapse
Okay,
It is still doing it and I'm not sure if it is the sdcard. Tried a different card I have at home and I still have the same problem.
I'm also getting extra coloured pixels appear on the T-Mobile G1 screen.
I can still get to bootloader and recovery (sometimes.....).
How do I pull a logcat?
MrZ
adb logcat
you can also run ddms.bat and get the log from there
misterzak said:
Okay,
It is still doing it and I'm not sure if it is the sdcard. Tried a different card I have at home and I still have the same problem.
I'm also getting extra coloured pixels appear on the T-Mobile G1 screen.
I can still get to bootloader and recovery (sometimes.....).
How do I pull a logcat?
MrZ
Click to expand...
Click to collapse
well trying to solve the problem by trying another sdcard is not a fix... since some roms do rely on the ext contents for things to work properly. what i suggest is having the 3nd card completely wiped and partitioned correctly..then move a rom onto the card and flash like u normally would.
Thanks for the info.
That was one of the first things I tried. I managed on Tuesday to install AOSP_ADP_1.6_r1.2_DRC92_rooted_base_v2.zip, and it worked for a short period of time, but it now crashes or doesn't boot up.
Getting worried now.......
misterzak said:
Thanks for the info.
That was one of the first things I tried. I managed on Tuesday to install AOSP_ADP_1.6_r1.2_DRC92_rooted_base_v2.zip, and it worked for a short period of time, but it now crashes or doesn't boot up.
Getting worried now.......
Click to expand...
Click to collapse
Something may be wrong with the phone itself
Try flashing the RC29 and seeing if the problem persists. if it does, then its probably a hardware problem. You can talk to tmobile or HTC about it and see what they say
B-man007 said:
Something may be wrong with the phone itself
Try flashing the RC29 and seeing if the problem persists. if it does, then its probably a hardware problem. You can talk to tmobile or HTC about it and see what they say
Click to expand...
Click to collapse
Thanks for that. I assume if they ask me to return it to them to reflash the original bootloader and recovery screens so that they cannot tell I've been "playing" with my phone...
Haha well once you flash the RC29 you wont have to because it will all be stock. If Tmo replaces phones for missing text messages, which is for sure a software problem (yes ive seen them do this), then they definitely will for this issue.
B-man007 said:
Haha well once you flash the RC29 you wont have to because it will all be stock. If Tmo replaces phones for missing text messages, which is for sure a software problem (yes ive seen them do this), then they definitely will for this issue.
Click to expand...
Click to collapse
If I flash RC29 (or RC7 for me) will this brick the phone as I currently have Death SPL. I'm sure I've read that somewhere on here?
Unrooted.......
I've now reverted back to RC7 (as I'm in the UK) and all seems okay....for now.
I will run it like this for a day to see if it still crashes or does anything funny. If it doesn't, I will re-root and start again!
Thanks for the help with this. I will update if it continues to crash.
Alright lets hope this fixed it lol
also it may be a little late but you should be fine flashing the RC7 as it replaces the SPL and radio
EVT Board.........
B-man007 said:
Alright lets hope this fixed it lol
also it may be a little late but you should be fine flashing the RC7 as it replaces the SPL and radio
Click to expand...
Click to collapse
Now this is interesting, RC7 was fine. Re-rooted the phone, fine. Flashed AOSP_ADP_1.6_r1.2_DRC92_rooted_base_v2.zip ROM, fine. Flashed Amon_RA's v1.2.3.img recovery, fine. This is where it gets fun, partitioned my card within the recovery to FAT32, ext2 and linux-swap, then rebooted into recovery. The phone crashed. So, I thought there must be an issue with the sdcard. Put in the stock 2Gb card with the RC7 DREAIMG.nbh file on and pressed camera+power to go back to RC7. It came up with an red code 00058002, then went back to the bootloader screen. It stated at the top that it was an EVT board. Searched all of the Dream Q&A section for EVT and absolutely nothing. Tried going into bootloader again and that screen started to warp and the graphics and pixels started to jumble up.
Any ideas?
wow.....it changed board types on you?
did you manage to flash cyan at all before that happened?
you should flash cyan and boot on it before flashing amonra's recovery.
you can then flash the recovery then partition the card and wipe just to be safe
B-man007 said:
wow.....it changed board types on you?
did you manage to flash cyan at all before that happened?
you should flash cyan and boot on it before flashing amonra's recovery.
you can then flash the recovery then partition the card and wipe just to be safe
Click to expand...
Click to collapse
I flashed the AOSP_ADP_1.6_r1.2_DRC92_rooted_base_v2 ROM and booted it up fully. Then using the Terminal Emulator within Dev Tools I flashed Amon_RA's recovery. All went well until I partitioned the sdcard. It won't boot up at all into the home screen or recovery, just bootloader, although it did this before when it first started crashing. I'm gonna leave it tonight and try again tomorrow.
Do you know anyone else on here who has any idea on this one? Seems like I'm the first!
This is probably an issue with the recovery itself...though ive never read about anything like your having.
ill bump this thread and see if anyone can help...maybe david can (ill tell him to get on here)
why dont you give a differant recovery image and dont try to partition just try with a fat32 sdcard on a cyan rom or something see what happens with that

[SOLVED]Hero Rom for HSPL

Micro Hero Rom Installed
Hi i am looking for a Hero Rom for Hard SPL if any. i know that there is a micro Hero rom for any SPL...but after i install the micro hero rom i get lot of forecloses..and a blank homescreen with a notification bar ....
I use Amon RA recovery for Dream and i have switchrom so i have backups...
I have posted for help in the Micro Hero Rom and i talked to the Author of the Rom but so far no luck....
This is the ROM Post: http://forum.xda-developers.com/showthread.php?t=561179
these are the instructions from the Author
"How to install:
1, Copy update file to sdcard
1b, If using a recovery older than Cyanogen 1.4, rename to update.zip
2, flash from recovery and if first time with this build, alt+w to wipe
3, in adb, type adb shell mount /system/sd; rm -r /system/sd/*
4, Reboot"
i have setup adb but when i type "mount /system/sd; rm -r /system/sd/*"
it says that "cannot remove /system/sd/* " or something...
Is there any other way to do it like from recovery??
I really liked the Rom
this is my SPL details
Drea100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-2.22.19.261
Current rom: Cyanogenmod 4.2.9.1
Partition: 512 mb EXT 3 94 mb swap rest FAT
I am sorry if my post is stupid and yea i did search a lot
That's it. The microhero, MAYBE Eugene's Espresso because I think he mentioned not having it made specifically for Haykuro spl. I would check it out
JAguirre1231 said:
That's it. The microhero, MAYBE Eugene's Espresso because I think he mentioned not having it made specifically for Haykuro spl. I would check it out
Click to expand...
Click to collapse
no its for Death SPL
http://forum.xda-developers.com/showthread.php?p=5340058#post5340058
Use the recovery in my sig and do the 3 wipes: factory, ext, and davlic.
evilkorn said:
Use the recovery in my sig and do the 3 wipes: factory, ext, and davlic.
Click to expand...
Click to collapse
i did that...still i am getting forecloses after the htc logo boots up..
well i have this http://forum.xda-developers.com/showpost.php?p=4647751&postcount=1 v 1.5.2
If i do the Full wipe i have a boot loop htc logo
geokuttan said:
no its for Death SPL
http://forum.xda-developers.com/showthread.php?p=5340058#post5340058
Click to expand...
Click to collapse
Try v2, it wasn't until today that it needed the Danger spl
JAguirre1231 said:
Try v2, it wasn't until today that it needed the Danger spl
Click to expand...
Click to collapse
i flashed the 2.0 version.....
geokuttan said:
i flashed the 2.0 version.....
Click to expand...
Click to collapse
http://www.4shared.com/file/194773147/6ec4f2bd/Espresso_v2.html
JAguirre1231 said:
http://www.4shared.com/file/194773147/6ec4f2bd/Espresso_v2.html
Click to expand...
Click to collapse
finally i flashed it....now instead of homescreen there is a htc logo....
lol
geokuttan said:
finally i flashed it....now instead of homescreen there is a htc logo....
lol
Click to expand...
Click to collapse
Ok, that happens after all hero roms. In about a minute it will show a loading window
JAguirre1231 said:
Ok, that happens after all hero roms. In about a minute it will show a loading window
Click to expand...
Click to collapse
yeppieeee i finally got it to work...thankx a lot man.... YOU ROCK....
i can use APNDroid to block 3g right....and other apps (cyanogenmod apps) should work right...
One last question....it seems kinda laggy little bit...is there any way to speed up...like increasing the swap size...i already have 96 mb...
geokuttan said:
yeppieeee i finally got it to work...thankx a lot man.... YOU ROCK....
i can use APNDroid to block 3g right....and other apps (cyanogenmod apps) should work right...
Click to expand...
Click to collapse
No, most of cyans apps are made for 1.6, this is 2.0 (2.1?). Some may work, but bluetooth won't, spare parts won't, contact and phone won't, etc...
And apndroid should should work.
JAguirre1231 said:
No, most of cyans apps are made for 1.6, this is 2.0 (2.1?). Some may work, but bluetooth won't, spare parts won't, contact and phone won't, etc...
And apndroid should should work.
Click to expand...
Click to collapse
yea..it seems little bit laggy...is there any way to fix it...
geokuttan said:
yea..it seems little bit laggy...is there any way to fix it...
Click to expand...
Click to collapse
It's laggy because it was made for the stock spl, if you had the danger spl it would be faster. And Hero isn't exactly the kind of rom you should be running if you want speed
yea...i didnt flash danger spl because some people said that it might brick my phone...so i didnt wanna take the risk...and if i have danger spl...i cannot run cyanogenmod...
geokuttan said:
yea...i didnt flash danger spl because some people said that it might brick my phone...so i didnt wanna take the risk...and if i have danger spl...i cannot run cyanogenmod...
Click to expand...
Click to collapse
You have a possbility of bricking yes. And that is wrong, spl allows you to have more space for apps and such. It doesn't limit your ability to flash roms, flashed cyan yesterday actually.
JAguirre1231 said:
You have a possbility of bricking yes. And that is wrong, spl allows you to have more space for apps and such. It doesn't limit your ability to flash roms, flashed cyan yesterday actually.
Click to expand...
Click to collapse
so the cyanogenmod latest will also work with Danger SPL? wow i didnt know that...i might take the risk of changing to Danger SPL(haykuro)....
Last one to add...its faster now..i ran a fix_permission/fix apps uid mismatches...and its faster...

Categories

Resources