Updated with kallt_kaffe's full update! (btips/bluetooth still disabled)
Okay here's an androidinstall.tar and androidupdate.tar for nand and also works for non-nand
androidinstall.tar uses advanced launcher and doesn't have rosie or any of that.
if you use the update option in the menus with androidupdate.tar, it'll install rosie and all the widgets etc.
instructions:
use the 240x320 nbh file from martin's site
add the included androidinstall.tar and optionally androidupdate.tar to your /sdcard/andboot folder
boot up holding down the dpad center (or press and hold the middle of the touchscreen) to get the menu
pick where you want stuff
install
(optionally)update to install the sense widgets from androidupdate.tar
if you use the update option, please use fix permissions.
the zip file is here
And if you feel so inclined... beer donations will still be accepted, though not encouraged.
This system is quite awesome, definitely looking forward to get this!
Do you press volume up or volume down to boot menu?
EDIT: I think I am doing something wrong, I am getting same error that I got with Eclair build.
init: unable to open persistent property directory /data/property errno: 2
Hold volume up.
sshark said:
This system is quite awesome, definitely looking forward to get this!
Do you press volume up or volume down to boot menu?
EDIT: I think I am doing something wrong, I am getting same error that I got with Eclair build.
init: unable to open persistent property directory /data/property errno: 2
Click to expand...
Click to collapse
me too...
Edit: well, i got craig's build going, so I'll start there.
Edit 2: vilord, looks like maybe the androidinstall.tar is corrupt? I've downloaded twice and I'm getting an unexpected EOF error while extracting.
gah, we're just having endless fun with bad uploads... I'll try again
EDIT:
Yup, it was a bad upload, the new one is quite a bit bigger
link points at the repaired file.
I got this build installed to the SD Ext2 partitions (I'm using Haret), but it won't go past the calibrate screen (completely unresponsive). Anyone know a way around this?
codf4ther said:
I got this build installed to the SD Ext2 partitions (I'm using Haret), but it won't go past the calibrate screen (completely unresponsive). Anyone know a way around this?
Click to expand...
Click to collapse
Its not unresponsive. this always happens with tattoo builds just tap the center of the screen several times until you get past it.
got this build working from nand and i love it. fast and responsive only problem im having is market wont work i keep getting unsuccessful download no matter what i try to download. any suggestions
update?
I am also unable to get past the calibrate screen. I've tried holding and tapping the middle over and over, and it just stops there. like, 20 times, and it never progresses. I think that screen is frozen.
I'm booting with haret.
Also, forgive the ignorance, but what is included in the update file? Is it system updates, or just eye candy/widgets?
celticchrys said:
I am also unable to get past the calibrate screen. I've tried holding and tapping the middle over and over, and it just stops there. like, 20 times, and it never progresses. I think that screen is frozen.
I'm booting with haret.
Click to expand...
Click to collapse
tap and hold for one second in the center of the screen 6 times or more
What is the process to get the menu??? I am running WM 6.1, I go to File Explorer to start Haret.exe in the ANDBOOT folder with all the basefiles, etc. from this thread using DEFAULT.txt and hold down the volume switch right after I start the text but I get no menu??? I must be doing something wrong if others are having success, any ideas??? Thanks.
Note: stupid me figured it out..............doh!
video of being stuck at calibration
jamezelle said:
tap and hold for one second in the center of the screen 6 times or more
Click to expand...
Click to collapse
I phrased my previous post poorly. I meant that I tapped and held many times and it never progressed. Here's a video clip of me trying again.
http://www.youtube.com/watch?v=PE1jg4TNo_Y
dude you have to hit the next target.... if you look in your video... the target is in the top left now... tap it.. it will move to all 4 corners!
celticchrys said:
I phrased my previous post poorly. I meant that I tapped and held many times and it never progressed. Here's a video clip of me trying again.
http://www.youtube.com/watch?v=PE1jg4TNo_Y
Click to expand...
Click to collapse
yea dude your screen is froze, never had that happen
gssweat said:
dude you have to hit the next target.... if you look in your video... the target is in the top left now... tap it.. it will move to all 4 corners!
Click to expand...
Click to collapse
it doesnt even calibrate our screen its meant for the tattoo, you can hit anywhere you want to
I'm booting from Haret, and mine is freezing at calibration as well.
Market Issue
I've previous loaded Jamezelle's and now loving your version!
I can't seem to download any applications via Market. Keeps on trying to download but instantly ends up with 'Download Unsuccessful'.
Is this build conflicting with my other build (Jamezell's), thinking that I downloaded it already and can't 'twice'?
Do I need to reset?
celticchrys said:
I am also unable to get past the calibrate screen. I've tried holding and tapping the middle over and over, and it just stops there. like, 20 times, and it never progresses. I think that screen is frozen.
I'm booting with haret.
Click to expand...
Click to collapse
Same here. :-(
Same here, market doesn't download.
mfpreach said:
Same here, market doesn't download.
Click to expand...
Click to collapse
Apply the androidupdate.tar that is attached to the OP as "tattoofix.zip" (extract it and push the androidupdate.tar to your /sdcard/andboot folder) and you should be good to go.
vilord said:
Apply the androidupdate.tar that is attached to the OP as "tattoofix.zip" (extract it and push the androidupdate.tar to your /sdcard/andboot folder) and you should be good to go.
Click to expand...
Click to collapse
Thanks Vilord!
Related
I find it strange that this App seems to try to open itself upon startup.....even after I have wiped twice switching ROMs. How is it even on there?
|Spike|
Probably stores information somewhere else on the phone than normal. adb shell your phone and look for it manually
AGx-07_162 said:
I find it strange that this App seems to try to open itself upon startup.....even after I have wiped twice switching ROMs. How is it even on there?
|Spike|
Click to expand...
Click to collapse
Hmm odd.. I wrote that app and I made an activity that starts on startup the normal way... not sure why it would still be there after a wipe... *shrug*
I had a similar issue with another app. No matter how many times I wiped, there it was. I think the Market got "wonky" and was downloading it each time I started up for the first time after a wipe. Almost seemed the market website didn't get notified of the successful download/install and was trying to "finish" the download upon signing back on.
whats the problem? uninstall it if you don't like it. personally, I think its a great application and I use it daily.
What should you keep your settings on with this app, both high and low. Also after applying the numbers do you need to reboot?
AGx-07_162 said:
I find it strange that this App seems to try to open itself upon startup.....even after I have wiped twice switching ROMs. How is it even on there?
|Spike|
Click to expand...
Click to collapse
Seems like a silly question, but do you use apps on SD card.
One of my favorite features of doing that is that I dont actually have to reinstall after wiping, just redo the simlink
Argh! Stupid browser double posting
themyth69 said:
What should you keep your settings on with this app, both high and low. Also after applying the numbers do you need to reboot?
Click to expand...
Click to collapse
That depends on personal preference. I keep mine at 528/528 'cause I like me some speed
EDIT: forgot the second half of your post, you don't need to reboot after applying.
ive never been able to get open over clocker to do ANYTHING, i put values in the box hit apply and nothing happens... reboot... cpu at same speed.... its like the button just does nothing, tried the standalone app and dudecake.9 with it integrated. it hasnt ever caused me any problems and removing it worked fine for me, it just never did much of anything at all for me
are you using the dude's build? he included the app in his builds until this last build
ESKIMOn00b said:
tried the standalone app and dudecake.9 with it integrated.
Click to expand...
Click to collapse
yes i have
I just auto-nooted a new NC and am very pleased so far.
I also tried NookieFroyo which is encouraging, but too slow for general use presumably due to running of the SD. But while running it, I noticed that the version of SoftKeys it uses allows one to move the buttons around.
Back in auto-nooted version, I went to the market and found a newer version available. When I try to download it, the installation fails saying that there is a problem with the keys.
Has anyone successfully installed the latest Soft Keys on an auto-nooted NC? Care to share?
Thanks,
--Jim--
First off, get Button Savior. It's much better. Secondly, I found out that you can swipe left on the status bar to go back. This eliminates 99% of the problems from no back button.
Sent from my Nook Color
thisisjjd said:
I just auto-nooted a new NC and am very pleased so far.
I also tried NookieFroyo which is encouraging, but too slow for general use presumably due to running of the SD. But while running it, I noticed that the version of SoftKeys it uses allows one to move the buttons around.
Back in auto-nooted version, I went to the market and found a newer version available. When I try to download it, the installation fails saying that there is a problem with the keys.
Has anyone successfully installed the latest Soft Keys on an auto-nooted NC? Care to share?
Thanks,
--Jim--
Click to expand...
Click to collapse
I had soft keys 3.0 and last night I went to the market and downloaded it from there and everything worked, now I have 3.0.4 installed. You could try to remove the apk from the app directory and then try to install from the market
lucifurious said:
First off, get Button Savior. It's much better. Secondly, I found out that you can swipe left on the status bar to go back. This eliminates 99% of the problems from no back button.
Sent from my Nook Color
Click to expand...
Click to collapse
I disagree. I had Button Savior for a while but it was extremely annoying that no matter where I put it, it would eventually be in the place that I had to click something; whether it be a button in an app, a game, or the keyboard (if I put it somewhere in the lower half of the screen).
The problem is of course, that you can't move the tab without exiting whatever app you're in (and for games, that sometimes means killing your progress).
With SoftKeys, you can move it around whenever you feel like, without having to exit the app you're using. Infinitely better.
Anyway, thanks for the tip about the swiping on the status bar. I did not know that!
Button Savior is annoying, I hate having to tap the little arrow as much as I hated tapping it for Softkeys before I set it up to use the Nook Hardware button; something Button Savior can not do..
http://nookdevs.com/NookColor_Default_Launcher
As for the OP, just update in the market, works fine.
khaytsus said:
As for the OP, just update in the market, works fine.
Click to expand...
Click to collapse
It doesn't work for me. The download completes, and then after it attempts the installation, I get the error:
Code:
Installation Error
Package file was not signed correctly.
I haven't seen this on any other market installations.
Khaytsus, I notice from your signature that you Auto-nooted from 1.0.1 whereas I Auto-nooted from 1.0. I wonder if that is the difference? I rooted from 1.0 thinking that it might provide more flexibility later -- and I hadn't heard anything about 1.0.1 that indicated I needed to start there.
thisisjjd said:
It doesn't work for me. The download completes, and then after it attempts the installation, I get the error:
Code:
Installation Error
Package file was not signed correctly.
I haven't seen this on any other market installations.
Khaytsus, I notice from your signature that you Auto-nooted from 1.0.1 whereas I Auto-nooted from 1.0. I wonder if that is the difference? I rooted from 1.0 thinking that it might provide more flexibility later -- and I hadn't heard anything about 1.0.1 that indicated I needed to start there.
Click to expand...
Click to collapse
Wouldn't think so... Dunno.
thisisjjd said:
I notice from your signature that you Auto-nooted from 1.0.1 whereas I Auto-nooted from 1.0. I wonder if that is the difference?
Click to expand...
Click to collapse
Sure enough, I re-auto-nooted after upgrading to 1.0.1 and then I could download SoftKeys from the market just fine.
hello guys , @xdandroid has updated this on twitter , it is a test build.
here is the original link:
http://southcape.org/2011/02/11/xdandroid-gingerbread-public-test-build/
Here link for Russia
http://xdandroid.at.ua/news/pervyj_publichnyj_bild_android_gingerbread/2011-02-12-19
why when im boot to this ginderbread before the "A N D R O I D" i see the black screen and all...
Try new rootfs
tnx man now it boooooot!!!)))
LENINred,не за что
sorry for russian,i said "No thanks at all"
unable to boot
Doesn't passes the roofs loading. It says I should unzip it (of course it is...)
Topaz100 latest everything. I think I did nothing wrong.
sampainho said:
Doesn't passes the roofs loading. It says I should unzip it (of course it is...)
Topaz100 latest everything. I think I did nothing wrong.
Click to expand...
Click to collapse
Did you renamed the "rootfs_xxxxxx" to just "rootfs"?
ReWind402 said:
Did you renamed the "rootfs_xxxxxx" to just "rootfs"?
Click to expand...
Click to collapse
Yes I did. Will try to gather everything again and see how it goes...
Can someone make video of gingerbread running on topaz?
3D is buggy, but 2.3 seems faster and nicer...
I cannot install this! :-(
Every time I run Haret it'll go to "android..." and than I get a black screen. updated rootffs as well...
what files do you use? The files provided in andboot from XDAndroid?
please help... would like to test
Is the keyboard really small for anyone else?
I mean it works surprisingly well, but on my Pure it so damn tiny
Very impressive!
Corwen said:
Is the keyboard really small for anyone else?
I mean it works surprisingly well, but on my Pure it so damn tiny
Click to expand...
Click to collapse
Keyboard super tiny as well! Topa100 here! A slow on Angry Birds, but ran fantastically!
Looking forward to see it running from phone memory instead of memory card!!!
Hi,
I hope, it's the same Version I'm trying actually, so here's my feedback:
TOPA100, Gingerbread Release GBX0A dated 12/02, no overclocking
1st impression: running very fast and very stable, no problems with basic functions
problems after detailed check:
1) GSM/3G signal reception is weak in comparison to FRX04 (cannot receive a 3G sig at a place where I usually have one under FRX04 or WiMo)
2) GPS not working
positive things to mention:
1) faster than FRX04
2) wakeup is working stable
3) switching on/off WiFi (have to activate it in WiMo first, of course) works stable even after 12-14 hours
4) Camera not working, but the app doesn't crash in photo mode
5) with a for me "normal" kind of usage (longer standby periods, checking SMS/MMS around every hour, receiving email every 30 minutes, some WiFi action, testing some apps, one or two calls) I have a battery duration time of somewhere between 18 and 24 hours
Conclusion for the devs: why not switching over to Gingerbread?
Cheers
Zap
Good system
Zaphod_b_1 +1
I have the same comments.
I installed FLash 10.1 . It doesn't crash the browser like in froyo. but nothing displays.
The sensor doesn't work so most games and the landscape mode won't work.
Anyone else having issues with no sdcard showing up even though it's mounted on /sdcard? Tried symlinking it to /months/sdcard without any luck.
NervGaz said:
Anyone else having issues with no sdcard showing up even though it's mounted on /sdcard? Tried symlinking it to /months/sdcard without any luck.
Click to expand...
Click to collapse
SD card is still working for me
Have you got the latest rootfts?
Double checked and updated kernel and rootfs, sdcard mounts but settings show free space and total as unavailable and various apps say there's no sdcard whereas some find it without a problem.
NervGaz said:
Double checked and updated kernel and rootfs, sdcard mounts but settings show free space and total as unavailable and various apps say there's no sdcard whereas some find it without a problem.
Click to expand...
Click to collapse
I'm pretty sure the problem is that we're running it off the SD card, so it recognizes that as the phone and then can't find another source, as there isn't one.
Some apps work for me and some don't
I'm running 3.0, preview 4, and I had a question about the long press. On every video online, the long press on the home screen allows you to go into a screen that has apps on the bottom, and a display of all your home pages on top. In addition, there's a while boarder around each home page (that you can see when you scroll). Not only do I not have the thin white line boarder around the pages, but when I long press, it acts like 2.2 where it gives you a menu for widgets, shortcuts, etc.
What do I need to do to get the long press option everyone else has? Is that launcher pro, or am I just simply overlooking a simple setting?
Thanks everyone.
Nobody knows?
It's a feature of whatever launcher is being used...
Sent from my Nexus One using XDA Premium App
danger-rat said:
It's a feature of whatever launcher is being used...
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
Does anyone know the launcher everyone is using then with 3.0 on Nooks? I want to guess it's Launcher Pro Plus, but I don't want to buy it until I know that's what I need.
Thanks for the reply btw.
EVO_Android said:
Does anyone know the launcher everyone is using then with 3.0 on Nooks? I want to guess it's Launcher Pro Plus, but I don't want to buy it until I know that's what I need.
Thanks for the reply btw.
Click to expand...
Click to collapse
Sounds like you are describing the stock launcher, which I use. I am not sure if it is different with deeper blues build, if that is what you are running. I am running HC on emmc version 2. I thought the two were basically the same, however.
bdcrim said:
Sounds like you are describing the stock launcher, which I use. I am not sure if it is different with deeper blues build, if that is what you are running. I am running HC on emmc version 2. I thought the two were basically the same, however.
Click to expand...
Click to collapse
What's weird is I have the same version as this guy:
http://www.youtube.com/watch?v=4CEC0fcfbpM
...and yet, I don't have the +apps button on the top right, nor the boxes around each home screen which can be seen when he swipes between them, or the long press widget screen. It almost feels like mine acts more like Froyo with a pretty layer of HC on top. To confirm, mine is Deeper Blue's Preview V04.
EVO_Android said:
What's weird is I have the same version as this guy:
http://www.youtube.com/watch?v=4CEC0fcfbpM
...and yet, I don't have the +apps button on the top right, nor the boxes around each home screen which can be seen when he swipes between them, or the long press widget screen. It almost feels like mine acts more like Froyo with a pretty layer of HC on top. To confirm, mine is Deeper Blue's Preview V04.
Click to expand...
Click to collapse
Same stock launcher that I have. You may try to reinstall the Rom with a new image.
Do you know good instructions here to download a version of 3.0 that installs internally and that's over clocked but has the launcher shown above? (IE: yours)?
Thanks man.
EVO_Android said:
Do you know good instructions here to download a version of 3.0 that installs internally and that's over clocked but has the launcher shown above? (IE: yours)?
Thanks man.
Click to expand...
Click to collapse
So, if I read your post correctly, are you saying you now want to go with Honeycomb with an internal build, to the eMMC?
If so, then you need to check out samuelhalff's thread here:
http://forum.xda-developers.com/showthread.php?t=947071
I have been running that build since it first came out and loving it.
Sam's build will give you the stock launcher you see in the YouTube video you posted earlier. You should have also gotten that with the SD build from deeper-blue, but I have never run that version of HC, so cannot verify with certainty.
If any issues, you can always PM me and I will help you where I can (from a user perspective, not dev).
Good luck!
Quick question. I'm trying to over clock my 3.0 HC system, and in the instructions on Androidtablets.net says I need to find a program called Rom Manager to boot from. Where is this? I can't find it.
EDIT: Ok I'm dumb, it's an app... just trying to get it to install successfully. Thanks for dealing with a noob .
Ok, I'm trying to put clockwork recovery on there (since I didn't understand I needed to do that.. duuuhhrrrrrr). I downloaded the zip file, and put it on my SD card. I booted up Rom Manager, and hit Flash Clockworkmod recover. Then clicked Nook (old). However, it says 'An error occurred when attempting to run privileged commands!'.
Did I miss a step somewhere? Hopefully this is a slightly less embarrassing question . Thanks!
Running latest sinless, not that I think it is Sinless related. But whenever I attach a photo into hangouts(sms,mms) The photo completely disappears from my phone. I even did a test to make sure it wasn't just simply getting moved, I re-labeled it a simple word, and searched for it, and came up with nothing.. Any ideas?
vwmaniacx said:
Running latest sinless, not that I think it is Sinless related. But whenever I attach a photo into hangouts(sms,mms) The photo completely disappears from my phone. I even did a test to make sure it wasn't just simply getting moved, I re-labeled it a simple word, and searched for it, and came up with nothing.. Any ideas?
Edit: seems to only be happening when attached from ES File Explorer.
Click to expand...
Click to collapse
Remember the old joke
ME: Doctor it hurts when i do this...
Doctor: Then don't do that
apply ?
clsA said:
Remember the old joke
ME: Doctor it hurts when i do this...
Doctor: Then don't do that
apply ?
Click to expand...
Click to collapse
Tried that.. It happens with any file "app" I use. gonna do a wipe, and reflash tonight to see if it changes anything.