Ad Hoc Connection problem - XPERIA X1 Q&A, Help & Troubleshooting

Hi,
I've setup a adhoc connection before via my vista laptop that has a wired connection to connect my x1i to the net. everything worked perfect. i could go on the internet with my x1i wifi connection and everything.
but now when i set up the adhoc connection my x1i connects to it perfect but i dont have internet on it...does anybody know what my problem is???

Related

internet connection sharing

has anyone tried internet connection sharing via HSPDA to a PC using activesync or bluetooth yet? any issues?
I use USB/ActiveSync and it works fine.
Just follow the manual. I followed it and got no problem.
One thing though, in the manual, it said "execute 3gnetopt.exe in the PC to optimize it for 3G connection".
It seems, after that it changed the routing automatically and can slow down your internet connection when not using the ICC via PDA.
Well, that's easy, just disable the "additional" network interface in the PC.
i could get the usb internet sharing to work but bluetooth internet sharing doesnt work. my pc is able to detect a local bluetooth pan network without internet access. anyone got their bluetooth/internet to work?
I have internet sharing working via bluetooth on a tablet and laptop (both running XP). First I tried DUN and it worked which suprised me. Then I set up a PAN connection and got Internet sharing running. After that DUN will no longer work, it looks like it trys but then fails. But Internet Sharing is faster and works fine over bluetooth.
It can be tedious at first, you need to create a BT PAN Connection on the PC, you need to create a BT partnership with the Kaiser in your Bluetooth manager on the PC. You need to set the Kaiser's Internet sharing to "Bluetooth PAN" and have the Network connection set to go to your ISP's GPRS internet AP.
Once I have PAN setup on the PC, it's showing "Network Cable Unplugged"
I then Start the Kaiser's Internet Sharing and press connect, it starts a GPRS connection.
I then open the Bluetooth Manager on the PC, select the Kaiser's Connection Icon, right click and select connect.
Then the two devices connect and I'm off and running.
With 3G I have been able to answer calls and talk on my Jawbone BT headset while still connected to the PC via BT as well, pretty much MAGIC
bluetooth still cant work with those instructions, i'll just stick to USB for now.
how do I ensure that HSPDA is working and its not just 3G?
My 3G icon changes to H when it connects hi-Speed. I'm wondering what Bluetooth Stack your PC has, I had issues with my tablet and Hermes until I got new BT Drivers from Fujitsu support. Your PC may need updated BT profiles? My laptop is Dell (uses a Toshiba BT Stack), the tablet is Fujitsu (also Toshiba BT Stack). Just a thought.
On the Plus side, using a USB cable will keep the phone charged, which is good because HSPDA is a power hog anyway.
i'm using a bluetooth dongle with my PC running vista
Both USB and BT ICS work great for me. I've used it on Edge, 3G, and HSDPA.
Both USB and BT ICS work great for me. I've used it on Edge
Internet sharing only working on 2G and not 3G
I am connected right now via internet sharing using my USB cable. However, this is working only if I have a 2G signal showing on my tytnII. When I am in a 3G location, the internet sharing program sits with the message "waiting for network"....this is just after the message "checking USB cable".
I have tried many things including a hard-reset, not having a full sync relationship between the PC, just connected etc. All to no avail.
I am using a new Dell laptop running Vista Ultimate.
Unlike previous PDAs I've had, I don't know a way to force the tytn II to stay on 2G, so when I am at work in a 3G environment, I cannot get internet sharing to work.
Help!

BT Internet sharing problem

Hi to all,
i'm trying to share my internet connection through bluetooth with my notebook but the connection doesn't work.
I follow the same working procedure used on Tytn, but with Diamond the notebook cannot surf on internet.
It connects with Diamond, get the ip (192.168.0.2) but is unable to open any site.
Diamond connection working perfect and works also if i try to establish connection through usb with notebook.
Any ideas ?
Kriminal

Internet connection sharing problem

Hi
My connection to internet through my diamond (internet connection over USB or bluetooth) is very unstable. The program show that it is connected and my computer gets an ip-adress from the phone, but I don't reach the internet (my phone answers to ping(default gateway))
The connection profile I'm using works (i use it to sync with Exchange) and one out of 10 times it works with my computer too
Anyone have similar problems?
Best regards
Andreassg
i have the same problem!
hey - i have the same problem - im trying on my mac (10.5.5), the computer connects to the phone fine and gets an IP address, but no data gets through to the net - strange though it works find using dialup bluetooth, just not using the internet sharing app and bluetooth lan connection. It has to be a windows mobile issue. Strange thing is though - and this is where things go strange, it works fine with the widcomm BT stack on an XP machine.
just my thoughts
D

Connect to the internet through a laptop

Hello!
I am connecting my Kaiser to my laptop through an ad-hoc connection. I set up internet sharing on the laptop, and created an ad-hoc connection on the laptop. The Kaiser connects to it, but I can't access the internet from the Kaiser. Maybe someone knows what can be the reason?
Thanks!
You need to use the "Internet Connection Sharing" program on your phone while connected via USB with Activesync. Ad-hoc mode is used if you want to share the connection over WiFi.
I really want to share the laptop's connection through wifi.
May I suggest the program WMWifiRouter. It costs $30 or 20 Euros, but will share your connection over Wifi, USB, Bluetooth. It also performs a number of other networking related function and is very easy to use but also has many options.
WMWifiRouter is used to share the pocket pc's internet connection, and I need to share the laptop's internet connection. Then, I want to connect my pocket pc to it, and access the internet through it.

Problem with connecting to internet !

Hi all
I have a speedtouch wireless modem and for connecting to adsl i setup bridge.
so when i wanna connect to internet with pc i should connect with broadband connection.
now my question is how can i connect to internet with htc diamond ? (with these conditions)
i made a cellular connection but it didn't work.
if you got a wifi lan connect to that and your phone will be online
if you don't connect your phone to activesync and your phone will have the same network access as the computer running activesync
thats all you really need to do

Categories

Resources